a 1,402-kg car rounds an unbanked curve with a radius of 53 m at a speed of 9.9 m/s. what minimum coefficient of friction must exist between the road and tires to prevent the car from slipping?

Answers

Answer 1

To keep the car from slipping, the road and tires need to have a minimum coefficient of friction of 0.188.

The things creating friction will determine the coefficient of friction. The value is often between 0 and 1, but it can also be higher. A number of 0 indicates that there is absolutely no friction between the items; superfluidity makes this feasible. Yes. Because the adhesive forces between molecules are stronger when the contact surface is substantially polished, frictional force increases. In this situation, the friction coefficient will be higher than one.

Here m= 1402 kg

r=53

v= 9.9 m/s

g=9.8

coefficient = (v^2) / rg

coefficient = (9.9^2) / (53*9.8)

coefficient = 98.01/519.4

coefficient = 0.188

Learn more about friction Visit : brainly.com/question/24338873

#SPJ4


Related Questions

what are the magnitude and location (with respective to point a) of the resultant force on the horizontal gate? the gate width is w. fluid density is r. you can leave your answer in terms of variables (w, r, and g).

Answers

The magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.

What is magnitude?

Magnitude is a measure of the size or intensity of a physical quantity. It is usually defined as the absolute value of the numerical value of the physical quantity, and is often expressed in terms of a unit of measurement. Magnitude can refer to a variety of different physical quantities, such as size, intensity, brightness, or energy. Magnitude can also refer to the relative size or intensity of two or more physical quantities, when compared to each other.

The resultant force on the horizontal gate is equal to the sum of the hydrostatic forces acting on the gate.
Since the gate is horizontal, the hydrostatic forces acting on the gate will be equal to the pressure difference between the top and bottom of the gate.
This pressure difference is equal to the product of the fluid density, gravitational acceleration, and the gate width.
Therefore, the magnitude of the resultant force on the gate will be:
F = w * r * g
The location of the resultant force on the gate will be at the center of the gate, which is point A.
Therefore, the magnitude and location of the resultant force on the horizontal gate is: F = w * r * g, and Point A.

To learn more about magnitude
https://brainly.com/question/24468862
#SPJ4

Which choice below explains what is happening in a liquid as it turns into a gas?
a. The particles speed up and spread apart
b. The particles speed up and come closer together
c. The particles slow down and spread apart
d. The particles slow down and come closer together

Answers

Answer:

a

Explanation:

As you add thermal energy the particles spread apart and are moving faster ..... a certain volume of water produces a much larger volume of steam as energy is added.....that is how steam engines work !

newton's second law in 1 dimension: what magnitude net force is required to accelerate a 1200-kg car uniformly from 0 m/s to 27.0 m/s in 10.0 s?

Answers

The required force is F = 3240 N.

As a result,

1200 kg is the car's mass.

Initial speed of the vehicle, u = 0.

The car's final speed is 27 meters per second.

Thus we have to first calculate the acceleration and then substitutes its value in the force formula

Taking time, t = 10 s

F = m a, where a represents the vehicle's acceleration, is the formula for the required force.

a= v - u / t

thus a = 27 - 0/ 10

a = 27/ 10

F = 1200 X 27 / 10

F = 3240 N.

Therefore, this is the necessary solution.

To know more about force you may visit the link:

https://brainly.com/question/28875770

#SPJ4

how long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot?

Answers

4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.

What is the center of the gravity?

The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.

Briefing:

T=2π√(l/g)

T=2π√(5.53/9.81)

T=4.71

T =4.71 s

To know more about center of gravity visit:

https://brainly.com/question/20662235

#SPJ4

1.
KNOW the UNITS!!!!!! SHOW YOUR WORK
What is the net force exerted on a 150.0kg race-car driver while the race car is accelerating from 0 to 58.7m/s i
3.50s?

Answers

Answer:

2515.7N

Explanation:

First step is to find the acceleration:

U = 0 and V =58.7 m/s

a = (V-U)/t

where, t = 3.5s

a = 58.7/3.5

so, in order to find the net force,

F= ma

= 150kg × 58.7/3.5

= 2515.7 N

Hooke's law states that the restoring force of a spring is directly proportional to a small displacement. Students in physics class were conducting an experiment to determine the difference in displacement among various springs. They wanted to determine if displacement not only varied with mass but also with the type of spring used. The class tested twenty springs; they varied in length, circumference, and material. They used an assortment of masses as well. On some springs they used masses of 5g increments; on others, masses of 10g increments. After hanging the masses from each spring, they measured how far the springs stretched. The students concluded that thin, aluminum springs had greater displacement than short, thick, iron springs. How could the students improve the validity of the data in this experiment to better support their conclusion?.

Answers

The kind of spring should be held constant so as to improve the validity of the experiment.

What is Hooke's law?

Hooke's law states that the force that acts on a spring is directly proportional to the extension of the spring as long as the elastic limit is not exceeded.

As such, we can now understand that we can only be able to talk about the Hooke's law if there is no way in which the material has passed the elastic limit of the material. In this case, we are told that the students just embarked on a kind of experiment and they want to be able to verify the validity of the Hooke's law.

We saw that the masses that were hanged were increased but the springs were also changed. This would not allow us to determine the force constant and the Hooke's law accurately.

Learn more about Hooke's law:https://brainly.com/question/29126957

#SPJ1

gravel is being dumped from a conveyor belt at a rate of cubic feet per minute. it forms a pile in the shape of a right circular cone whose base diameter and height are always the same. how fast is the height of the pile increasing when the pile is feet high? recall that the volume of a right circular cone with height and radius of the base is given by .

Answers

The fast is the height of the pile increasing when the pile is feet high 0.1989 ft/min.

Calculation:

Here given the rate of change in volume DV/DT = 40 actions and we need the rate of change in height when height h = 16.

Putting all values.

40 = π/4 x (16)² x DV/DT

= DV/DT= 40 x 4/ 1×16×16

0.1989 ft/min.

Rate of change in height when height is 16 H is equal to 0.1989 ft/min.

The goal is to get a text from as many modalities as possible so that models trained on The Pile have broader generalization capabilities. For stakes, experts believe it comes from the Latin word pira. Pila loosely translates to the ball. If you've ever seen inflamed hemorrhoid, you'll understand this moniker better. Many hemorrhoids actually look like small round spheres.

Learn more about The pile here:-  https://brainly.com/question/14355792

#SPJ4

suppose a woman does 550 j of work and 9800 j of heat transfer occurs into the environment in the process. (a) what is the decrease in her internal energy (in kcal), assuming no change in temperature or consumption of food? (that is, there is no other energy transfer.) -10350 kcal (b) what is her efficiency (in percent)? %

Answers

W = -500 J is the work, which is why it's negative because a woman is doing it.

Briefing

The heat transfer into the system,

Q = 9500 J, makes it positive.

(a) Heat and work are added to determine the change in internal energy, which is:

ΔU = Q+W

We replace with:

ΔU = 9500 J-500 J

ΔU = 9000 J\s(b) (b) The quantity of useful work completed given a total energy supply is now what is generally referred to as an efficiency. From this, we may divide the woman's labour by the shift in internal energy, giving us

=  500 j / 9000 j.

We get:

ϵ = 0.0556~ 5.56%

Learn to about Energy

Visit:

https://brainly.com/question/11399976

#SPJ4

which sentence correctly describes when the triple-alpha process occurs in the life cycle of an average-mass star

Answers

Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.

What results from the triple-alpha procedure as the finished product?

The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.

Which statement concerning alpha particles in an atom is accurate?

Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.

Learn more about Alpha Particle

Visit:

https://brainly.com/question/17464734

#SPJ4

based on its surface temperature of 6,000 k, most photons that leave the sun's surface lie in which region of the electromagnetic spectrum?

Answers

Most photons that leave the sun's surface have a surface temperature of 6,000 K, which corresponds to the visible light region of the electromagnetic spectrum.

The electromagnetic spectrum is a continuous range of wavelengths and frequencies that includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The wavelengths and frequencies of these different types of electromagnetic radiation are all different and correspond to different regions of the spectrum.

The visible light region of the electromagnetic spectrum is the portion of the spectrum that can be seen by the human eye. It ranges from about 400 nanometers (nm) to about 700 nm in wavelength, and corresponds to frequencies of about 7.5 x 10^14 Hz to about 4.3 x 10^14 Hz. Photons with wavelengths and frequencies in this range have enough energy to excite the photoreceptors in the human eye, allowing us to see them.

Learn more about Electromagnetic Spectrum here:

https://brainly.com/question/13803241

#SPJ4

a uniform thin rod of length 0.50 m and mass 4.0 kg can rotate in a horizontal plane about its center. a 3.0 gram bullet hits the end of the rod (initially at rest) at an angle of 60 degrees and imbeds in the rod. if the angular speed of the rod is 10. rad/s after the bullet strikes, what is the speed of the bullet before it strikes the rod?

Answers

The speed of the bullet before it strikes the rod is 67 m/s. To determine the speed of the bullet before it strikes the rod, we need to consider the conservation of angular momentum.

The moment of inertia of a thin rod about its center is given by the following formula:

I = (1/3) * m * L^2

where I is the moment of inertia, m is the mass of the rod, and L is the length of the rod.

Substituting the values given in the problem, we find that the moment of inertia of the rod is

(1/3) * 4.0 kg * (0.50 m)^2 = 0.67 kg*m^2.

In this case, the bullet strikes the rod, transferring some of its linear momentum to the rod in the form of angular momentum. The change in angular momentum of the rod is equal to the angular momentum of the bullet.

We can use the conservation of angular momentum to write the following equation:

I1 * w1 + J = I2 * w2

where I1 is the initial moment of inertia of the rod, w1 is the initial angular velocity of the rod, J is the angular momentum of the bullet, I2 is the final moment of inertia of the rod, and w2 is the final angular velocity of the rod.

Since the initial angular velocity of the rod is zero, we can simplify the equation as follows:

J = I2 * w2

Substituting the values given in the problem, we find that the angular momentum of the bullet is

0.67 kgm^2 * 10 rad/s = 6.7 kgm^2/s.

To determine the speed of the bullet before it strikes the rod, we need to consider the bullet's mass and the angle at which it strikes the rod. The mass of the bullet is given as 3.0 grams, which is equivalent to 0.003 kg. The angle at which the bullet strikes the rod is given as 60 degrees.

We can use the following formula to calculate the speed of the bullet before it strikes the rod:

v = (J/m) * sin(theta)

Substituting the values given in the problem, we find that the speed of the bullet before it strikes the rod is (6.7 kg*m^2/s / 0.003 kg) * sin(60 degrees) = 67 m/s. This is the final answer.

Learn more about Angular Momentum here:

https://brainly.com/question/13822610

#SPJ4

The adjacent figure shows a solid 'S' of weight 15N connected to a thread and put on an inclined plane. 1) a-Is the weight of solid 'S' a contact force or a force acting from a distance? b- List the characteristics of the weight of solid 'S'. Thread Inclined plane c- Represent the weight of solid 'S' by a vector. Choose a convenient scale. 2) a- Name the other forces acting on solid 'S' and indicate their types. b- Represent each force by a vector without respecting a scale. c- List the characteristics of each of the above forces. (Without the magnitude) 3) The thread is cut and solid 'S' moves as shown in the adjacent figure a- Name the new force that acts on solid 'S' and indicate its type. b- List the characteristics of this force.(scale 1cm-1.3N). Thread Inclined plane Solid 'S' Solid 'S'​

Answers

Answer:

Here is answer

Explanation:

a) The weight of the solid 'S' is a contact force because it acts on the solid 'S' through physical contact with the ground.

b) The characteristics of the weight of solid 'S' are:

It acts in the downward direction.

It is a gravitational force that is exerted by the Earth on the solid 'S'.

It is equal to the mass of the solid 'S' multiplied by the acceleration due to gravity (W = m*g).

c) The weight of solid 'S' can be represented by a vector as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

[/asy]

a) The other forces acting on solid 'S' are the normal force exerted by the inclined plane on the solid 'S' and the frictional force exerted by the inclined plane on the solid 'S'. The normal force is a contact force, while the frictional force is also a contact force.

b) These forces can be represented by vectors as shown below:

[asy]

unitsize(1cm);

draw((0,0)--(0,15),Arrow(6));

label("$W$", (0,7.5), W);

draw((0,0)--(15sqrt(2)/2,15/2),Arrow(6));

label("$N$", (7.5sqrt(2),7.5), NE);

draw((0,0)--(-15sqrt(2)/2,-15/2),Arrow(6));

label("$F_f$", (-7.5sqrt(2),-7.5), SW);

[/asy]

c) The characteristics of these forces are:

The normal force acts perpendicular to the surface of the inclined plane.

The frictional force acts in the opposite direction to the direction of motion or intended motion of the solid 'S'.

The magnitude of the normal force is equal to the weight of the solid 'S', but in the opposite direction.

The magnitude of the frictional force depends on the coefficient of friction between the solid 'S' and the inclined plane, as well as the normal force.

a) The new force acting on solid 'S' is the gravitational force, which is a force acting from a distance.

b) The characteristics of the gravitational force are:

It acts in the downward direction.

It is a force that is exerted by the Earth on the solid 'S'.

Its magnitude can be represented by the vector shown below (using a scale of 1 cm to represent 1.3 N):

[asy]

unitsize(1cm);

draw((0,0)--(0,-1.3),Arrow(6));

label("$W$", (0,-0.65), S);

[/asy]

what is the current through the heating element of an electric toaster oven if the heater has a resistance of 5 ohms and it is connected to 120 volts?

Answers

Answer:

24 A

Explanation:

Ohm's Law:  V = IR, so I = V/R

I = 120V/5Ω = 24 A

a simple pendulum is 4.00 m long. (a) what is the period of small oscillations for this pendulum if it is located in an elevator accelerating upward at 6.00 m/s2?

Answers

The time period of the small oscillations for the simple pendulum is found to be  3.14 seconds.

The pendulum is located in an elevator that is accelerating upwards with an acceleration of 6m/s² and length of the pendulum is 4m.

Because the elevator is accelerating in the upper direction the net acceleration of the pendulum will be (10 + 6)m/s².

The period of small accelerations for this pendulum will be given by the relation,

T = 2π(l/a)

Where,  l is the length of pendulum and a is the net acceleration.

Putting values,

T = 2π(4/16)

T = 2π(1/2)

T = π seconds.

T = 3.14 seconds.

So, the time period of this small oscillations for this pendulum is 3.14 second.

To know more about oscillations, visit,

https://brainly.com/question/12622728

#SPJ4

sir lancelot, who weighs 800 n, is assaulting a castle by climbing a uniform ladder that is 5.0 m long and weighs 180 n. the bottom of the ladder rests on a ledge and leans across the moat in equilibrium against a frictionless, vertical castle wall. the ladder makes an angle of 53.1 deg with the horizontal. lancelot pauses one third of the way up the ladder. (a) find the normal force and friction forces on the base of the ladder. (b) find the minimum coefficient of static friction needed to prevent slipping at the base. (c) find the magnitude and direction of the contact force on the base of the ladder. (that is, the vector sum of the forces at the base.)

Answers

(a) The normal force is 267.7 N and frictional force is 980 N.

(b) The minimum coefficient of static friction is 0.27, which is needed to prevent slipping at the base.

(c) The direction of the contact force is 1016 N.

∈(t) = 0

N₂ ( L sinθ ) = 800 ( [tex]\frac{L}{3}[/tex] cosθ )

N₂ = 267.7 N

(a) Normal force F(d) = N₂ = 267.7 N

Frictional force N = 800 + 180

                         N = 980 N

(b) The minimum coefficient of static friction,

F(d) = μ N₁

μ = F / N₁

μ = 267.7 / 980

μ = 0.27

(c) The direction of the contact force,

R = [tex]\sqrt{(980)^{2} + (267.7)^{2} }[/tex]

R = 1016 N

To learn more about Coefficient of static friction, Here :

https://brainly.com/question/24173409?referrer=searchResults

#SPJ4

a uniform meter stick of mass 24 g with two weights hanging from it is balanced on a knife edge at the 40 cm mark. a weight of mass 96 g hangs from the 9 cm mark. at which cm mark must the other weight of mass 96 g be located to keep the meter stick balanced?

Answers

The second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

To determine the location of the second weight that will keep the meter stick balanced, we need to consider the principles of equilibrium.

The weight of the meter stick can be calculated as follows:

Weight of meter stick = mass * acceleration due to gravity

= 24 g * 9.8 m/s^2

= 235.2 N

The total weight of the two hanging weights is 96 g + 96 g = 192 g = 1.92 N.

The sum of the forces acting on the meter stick is equal to zero when:

235.2 N + 1.92 N = 0

This equation tells us that the sum of the forces acting on the meter stick is equal to zero when the total weight of the two hanging weights is equal to the weight of the meter stick.

To determine the location of the second weight, we also need to consider the moments about the pivot point. The moment of a force is calculated as the product of the force and the distance from the pivot point. The moments about the pivot point are equal to zero when the sum of the moments of the forces on one side of the pivot point is equal to the sum of the moments of the forces on the other side of the pivot point.

The moment of the weight of the meter stick about the pivot point is calculated as follows:

Moment of the weight of meter stick = force * distance from pivot point

= 235.2 N * 0.4 m

= 94.08 N*m

The moment of the weight hanging from the 9 cm mark about the pivot point is calculated as follows:

Moment of weight hanging from 9 cm mark = force * distance from pivot point

= 1.92 N * 0.09 m

= 0.1728 N*m

To keep the meter stick balanced, the moment of the second weight must be equal in magnitude but opposite in direction to the moment of the weight hanging from the 9 cm mark. The moment of the second weight can be calculated as follows:

Moment of second weight = force * distance from pivot point

= 1.92 N * distance from pivot point

Substituting the value of the force and setting the moment equal to the negative of the moment of the weight hanging from the 9 cm mark, we get the following equation:

1.92 N * distance from pivot point = -0.1728 N*m

Solving for the distance from the pivot point, we find that the second weight must be located at a distance of 0.09 m from the pivot point, or 9 cm. This is the same distance from the pivot point as the weight hanging from the 9 cm mark.

Therefore, the second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

Learn more about Mass here:

https://brainly.com/question/19385703

#SPJ4

A student wants to make a simple model of the solar system to help him compare how long it would take for a spaceship to travel between different planets.

Which of the following things is essential for him to do in order to think about how long it would take?

this are the opions
He must make sure that the model of each planet looks like the planet it represents, but he does not need to accurately represent the relative distances between the planets because the most important thing is that models look like the thing they are modeling.


He must accurately represent the relative distances between the planets, but he does not need to make sure that the model of each planet looks like the planet it represents because only the relevant aspects of the thing being modeled need to be modeled accurately.


He must accurately represent the relative distances between the planets and also make sure that the model of each planet looks like the planet it represents, because a model should be as much like the thing being modeled as possible.


He does not need to accurately represent the relative distances between the planets, and he does not need to make sure that the model of each planet looks like the planet it represents, because there are always some differences between a model and the thing being modeled.

Answers

Answer:

To make a simple model of the solar system that can be used to compare the time it would take for a spaceship to travel between different planets, the student must accurately represent the relative distances between the planets. This is because the time it would take for a spaceship to travel between two planets depends on the distance between those planets, so accurately representing the distances between the planets is essential for thinking about how long it would take for a spaceship to travel between them.

It is not necessary for the student to make sure that the model of each planet looks like the planet it represents, although this may help make the model more understandable. The most important thing is that the model accurately represents the relative distances between the planets.

In summary, the student must accurately represent the relative distances between the planets in order to think about how long it would take for a spaceship to travel between different planets in the solar system.

a simple harmonic oscillator takes 11.5 s to undergo five complete vibrations. (a) find the period of its motion. s (b) find the frequency in hertz. hz (c) find the angular frequency in radians per second. rad/s

Answers

The required values are a) T = 2.3 seconds, b)  f = 0.434 Hz, c) ω = 2.7 rd/s.

Which of the following motions is simply harmonic?

Simple harmonic motion, a particular kind of periodic motion in which a particle repeatedly oscillates around a mean location, In U-tube oscillating liquid column motion is hence simple harmonic.

According to question:

Given,

Time = 11.5 seconds to five complete vibrations.

a) Time period is time taken to complete one vibration,

So T = 11.5/5 = 2.3 seconds

b) Frequency(f) = 1/T

f = 1/2.3 = 0.434 second inverse.

c) By using formula of angular frequency ω = 2π/T

ω = 2π/2.3 = 2.7 hz

Thus, final values are a) T = 2.3 seconds, b)  f = 0.434 second inverse, c) ω = 2.7 rd/s.

To know more about simple harmonic motion visit:

brainly.com/question/28208332

#SPJ4

a wall of a small house is 3 meters by 3 meters and is insulated using material that is similar to styrofoam (see table above). the styrofoam is about 2.5 cm thick. a heater inside the house keeps the temperature at 25 c while it is 0 c outside the shed. how much power in watts does the heater use just to make up for the heat lost through this one wall.

Answers

The heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

What is Styrofoam?

Styrofoam is a trademarked brand of foam insulation and craft material manufactured by the Dow Chemical Company. It is made from expanded polystyrene (EPS) beads that are fused together with steam and pressure. EPS is a lightweight and rigid material that is used for insulation, packaging, and soundproofing. Its properties make it an ideal material for crafting, floristry, model building, and other art projects. Styrofoam is stable in most environments and is resistant to water, oil, and most chemicals. It can be cut, shaped, and painted easily and is an excellent thermal insulator. In addition, it is also non-toxic and non-carcinogenic, making it a safe and economical choice for many applications.

Assuming that the wall is a perfect insulator, the heater will have to provide enough power to make up for the heat lost due to conduction and convection. The rate of heat loss per unit area is given by:

Q = λ*A*(T2 - T1)/d
Where:
λ = thermal conductivity of styrofoam (see table above)
A = Area of wall (3*3) = 9 m2
T2 = Temperature inside the house (25C)
T1 = Temperature outside the house (0C)
d = thickness of styrofoam insulation (2.5 cm)

Plugging in the values we get:
Q = 0.045*9*(25-0)/0.025 = 540 W
Therefore, the heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

To learn more about Styrofoam
https://brainly.com/question/29332536
#SPJ4

A heavy piece of hanging sculpture is suspended by a 90 cm long 5.0 g steel wire. When the wind blows hard, the wire hums at its fundamental frequency of 95 Hz.What is the mass of the sculpture?

Answers

According to the given statement 16.7kg  is the mass of the sculpture.

What is a fundamental frequency in physics?

The lowest frequency that could be produced by a particular instrument is known as the fundamental frequency. The fundamental frequency is also known as the instrument's first harmonic.

Briefing:

Use the string's tautness' fundamental frequency as a formula.

f = (1/2L)*√(T/μ) .... (Eqn1)

Where

f= frequency in Hertz =80Hz

T = The string's tension equals Mg.

M is a symbol for the substance's mass (sculpture)=?

g= 9.8m/s^2

L= Length of the string=90cm=0.9m

μ= string length divided by mass gives the string's density.

mass of string =5g=0.005kg

L=0.9m

μ=0.005/0.9 = 0.0056kg/m

Using (Eqn1)

95= 1/(2*0.9) √(T/0.0056)

171= √(T/0.0056)

Square both sides

29241= T/0.0056

T= 163.74 N

Recall that T =Mg

163.74= M * 9.8

M=163.74/9.8

M= 16.7kg

Consequently, the sculpture weighs 16.7kg.

To know more about Fundamental frequency visit:

https://brainly.com/question/29264927

#SPJ4

you work at a garden store for the summer. you lift a bag of fertilizer with a force of 131 n, and it moves upward with an acceleration of 0.790 m/s2. (a) what is the mass (in kg) of the fertilizer bag?

Answers

Mass of the fertilizer bag is 165.82 kg

Briefing:

According to Newton's law,

F = m*a

So, m= F/a

m= 131/0.790

m= 165.82 kg

What is mass?

Mass is the measure of matter of a body.

What is Newton's laws?

Newton has stated three laws of motion. The first law states that every object will remain at rest or in uniform motion in a straight line unless an external force compels it to change its state of action .

The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.

The third law states that every action has an equal and opposite reaction.

To know more such numericals, visit :

https://brainly.com/question/14633087

#SPJ4

A 1.5 kg block is on a 15° frictionless incline plane.

a) What is the normal force?

b) What is the downhill force?

c) What is the acceleration?

Answers

Answer:

Below

Explanation:

Normal force will be   mg cos 15° = 1.5*9.81 cos 15°   Newtons

Downplane force will be  mg sin 15° = 1.5 * 9.81  sin 15°    N

Acceleration

F = ma

F/m = a

1.5 ( 9.81) sin 15° / 1.5   m/s^2  = a

boat moves north at a velocity of 2.5 m/s while the current moves downstream at 6.0 m/s east. What is the resultant velocity of the boat, relative to an observer on the shore?

A) 4.5 m/s, NE
B ) 4.5 m/s, SE
C ) 6.5 m/s, NE
D ) 6.5 m/s, SE
E) 8.5 m/s, NE

Answers

Relative to the observer in on the shore, the velocity of the boat is 6.5 m/s, NE.

What is relative velocity?

The velocity of an object in relation to another observer is known as its relative velocity.

We cay say that the relative velocity is equal to the vector difference between the velocities of two objects. The relative velocity of A with respect to B= velocity of the body A – velocity of the body B.

The diagram below shows the calculation where AC is relative speed, AB is speed of the boat and BC is the speed of stream.

To learn more about relative velocity from the given link

https://brainly.com/question/19260269

#SPJ1

QUESTION 8 OF 30
Using equations for KE and GPE, what is the maximum height an object will
reach if it is thrown vertically upwards at 24.0 m/s ? (Answer to 3 sf with unit)

Answers

The maximum height an object will reach if it is thrown vertically upwards at 24.0 m/s will be equal to 29.35 meters.

What is kinetic energy?

Kinetic energy is the term used in physics to describe the force that a moving item has.

It is described as the amount of effort necessary to accelerate anybody with a particular mass from rest to a given velocity. Except for variations in speed, the body retains the kinetic energy it gains during acceleration.

As per the given information in the question,

The formula of kinetic energy is,

K.E = 1/2 mv²   (i)

The formula of gravitational potential energy is,

u = mg     (ii)

Equate equations (i) and (ii)

1/2 mv² = mgh

h = 1/2 v²/g

h = 1/2 (24)²/9.81

= 576/19.62

h = 29.35 meters.

To know more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ1

A car travels down a road at a certain velocity, vcar. The driver slows down so that the car is traveling only a third as fast as before. Which of the following is the correct expression for the resulting velocity?

a. 2vcar
b. 1/3vcar
c. -1/2vcar
d. -2vcar

Answers

The correct expression for the resulting velocity is -1/2 vcar. The correct option is c.

What is velocity?

The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

A car travels down a road at a certain velocity, is Vcar.

Let the initial velocity of the car travel downward be -V car

It is also, given, that the driver slows down so that the car is traveling only half as fast as before.

Resulting velocity = -1/2 vcar

Therefore, the correct option is c. -1/2vcar.

To learn more about velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ1

by studying distant galaxies in the 1920s, hubble made what important discovery that led us to conclude that the universe is expanding?

Answers

All galaxies outside the Local Group are moving away from us, and the farther away they are, the faster they're going.

How is Hubble's law defined?

We may learn a lot about the nature of the cosmos from Hubble's rule, which states essentially that a known universe velocity (or, as it is commonly displayed, its redshift) is precisely proportionate to its distance. The relationship between distance and speed should not exist if the cosmos is constant and unchanging.

What is the name of Hubble's theory?

The Hubble-Lemaître law, commonly referred to as Hubble's law, is the finding in astrophysics that planets are eloping from Earth at rates proportionate to their separation. In other words, they are travelling away from Earth more quickly the more away they are.

To know more about Hubble visit:

https://brainly.com/question/29766816

#SPJ4

what is the kinetic energy of a 60.0 g tennis ball traveling at 177.0 kilometers per hour? report your answer in joules (j).

Answers

The kinetic energy is 939.87 J.

what is kinetic energy?

Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.

A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.

Kinetic energy = 1/2mv²

Kinetic energy =  1/2×0.06×177²

Kinetic energy = 939.87 J.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

a vertical spring has a spring constant of 100 n/m. when an object is attached to the bottom of the spring, the spring changes from its unstretched length of 0.50 to a length of 0.65 m. the magnitude of the weight of the object is

Answers

Answer: Hookes law states F=kX where F is the force applied, k is the spring constant, and X is the extension of the spring from its resting point.Substituting the values in, we get:F=100*(0.65-0.5)=100*0.15=15N

Study the following systems: SYSTEM A: Electricity is used to heat a hot plate which heats water making steam which powers a turbine and a generator which makes electricity which is used to power a radio. SYSTEM B: Electricity is used to power a radio. Which system (A or B) is more energy efficient and explain why.

Answers

The system that is more energy efficient is system A because it makes use of electricity to produce more results.

What is energy efficiency?

Energy efficiency is the use of less energy to perform the same task or produce the same result.

Energy-efficient homes and buildings use less energy to heat, cool, and run appliances and electronics, and energy-efficient manufacturing facilities use less energy to produce goods.

Energy efficiency has the following benefits:

It saves moneyIt increases the resilience and reliability of the electric gridIt provides environmental, community, and health benefits

According to this question, the following applies:

SYSTEM A: Electricity is used to heat a hot plate which heats water making steam which powers a turbine and a generator which makes electricity which is used to power a radioSYSTEM B: Electricity is used to power a radio

Based on the above explanation, it can be observed that system A is more energy efficient because it uses the same electricity to achieve more.

Learn more about energy efficiency at: https://brainly.com/question/28939461

#SPJ1

questions 10-11 refer to a ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere. the ball rises to a height equal to the asteroid's radius and then falls straight down toward the surface of the asteroid. 10. what forces, if any, act on the ball while it is on the way up?

Answers

Only a decreasing gravitational force that acts downward will apply on the ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere.

What is gravitational force?All physical things with mass are drawn to the gravitational force, which can be thought of as an attracting force. It is the known natural force that is by far the weakest.The gravitational force, which is what pushes mass-containing objects toward one another. We frequently consider the pull of gravity from the Earth. Your body is kept on the ground by this force. However, all mass-bearing objects are pulled toward each other by gravity.

Hence,

Only a decreasing gravitational force that acts downward will apply on the ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere. The ball rises to a height equal to the asteroid's radius and then falls straight down toward the surface of the asteroid.

To know more about gravitational force visit

https://brainly.com/question/3009841

#SPJ4

Other Questions
Yuri wants to assign a task to his co-worker. He clicked the Task button to enter the subject, start date, and end date for the task. Then he clicked the Details button to add the number of hours needed for the task. Yuri clicked Save & Close to complete the assignment, but his co-worker did not receive the task. Which best explains Yuris error?He cannot assign a task to an individual co-worker. He should have entered the hours needed in the Task area. He entered the wrong subject name in the Task area. He did not add his co-workers information before saving the task. What is the rhyme scheme of the first stanza of " The Battle of Blenheim"? a service center receives an average of 0.7 customer complaints per hour. management's goal is to receive fewer than three complaints each hour. assume the number of complaints follows the poisson distribution. determine the probability that exactly four complaints will be received during the next eight hours. A _____________ is created by a consumer problem, need, or desire. a. financial prediction b. company scope c. competitive analysis d. business opportunity please select the best answer from the choices provided a b c d the equilibrium constant of a redox reaction can be calculated from the standard reduction potentials of involved redox couples at given temperature. Which of the following is a component of operating budgets? budgeted balance sheet capital expenditures budget sales budget budgeted statement of cash flows Why does the emily howell bot, and others like it, pose a potential threat to workers? Jeremy spent a total of $79.16 on a shirt and one pair of jeans. He knows the jeans cost $49.95 but he does not know the cost of the shirt, s. He created the model shown to find the cost of the shirt. helppppppppppppppppppppppppppppppppppppppppppppp. alexander's athletic apparel has 1,100 shares of 5%, $100 par value preferred stock the company issued at the beginning of 2023. all remaining shares are common stock. the company was not able to pay dividends in 2023, but plans to pay dividends of $13,000 in 2024. required: 1. & 2. how much of the $13,000 dividend will be paid to preferred stockholders and how much will be paid to common stockholders in 2024, assuming the preferred stock is cumulative? what if the preferred stock were noncumulative? an astronaut drops a rock from the top of a crater on the moon when the rock is halfwat down to the bottom of the crater its speed is what fraction of its cinal impact speed?A. 1/42B.1/4C. 1/22D. 1/2Answer: Robots collect information about their surroundings using various sensors. Sensors are devices that allow a machine to collect sensory data from the natural world, such as ________________________and many more.Whether its a robot using sensors or a human using senses, the process of collecting sensory data is called ______________..In addition to sensors, some robots have . ____________________.These robots can interpret the ______________they collected so they can actually __________________________of it.When AI makes sense out of data, it is called __________________________. this is a big part of what sets AI apart from other ___________________.nAs a human does parkour, they are using their _____________________to gather ____________________(or data) about their _________________. They might see a fence and __________ itThey might feel soft ground and _______ on itThey might use their arms and ___________Humans are able to _______________ lots of types of data, and then make sense of it, ____________________________________of moving through the world.Computers dont have this life experience! It would be very hard for computers to use __________ and ________ to complete a task as complicated as parkour in a variety of changing __________..A robot doing parkour needs to be able to ______ and make _____ very quickly as it moves around.Part 2. What were the examples of AI robots that we saw in the video?Define or describe the following terms below.Palletizers Drive Units Robots Thermal Imaging Drone Airborne Optical Sectioning Autonomous DronesPart 3 . Answer the questions below based on the slides.How do you think these robots use sensing?How do you think they use perception?How do you think these robots might collect information about their surroundings?How do you think they know what to do with the information they collect?Can you think of some problems that could be solved with the help ofrobots that can quickly maneuver around or over obstacles? Which of the following combinations of changes in government spending and taxes is necessarily expansionary?(A) Govt Spending: Increase Taxes: Increase(B) Govt Spending: Increase Taxes: Decrease(C) Govt Spending: Decrease Taxes: Not change(D) Govt Spending: Decrease Taxes: Increase(E) Govt Spending: Decrease Taxes: Decrease uppose that the log-based immediate-update technique is employed. describe the recovery process when a system crash occurs at time essie's therapist asks her to visualize being in the same room with the object that she fears. the therapist asks her to think about walking closer to the object, bending down, and picking it up. which therapeutic technique is the therapist utilizing? if government purchases were to decrease by $300 billion or if taxes were increased by $300 billion, the equilibrium level of real gdp would decrease by find f(20) if f(x)=[tex]\frac{1}{4}x+5[/tex] each student at william elementary can only participate in one fall activity. there are 65 students on the football team and twice that number in band. there are 61 students on each of the two soccer teams. how many students participate in fall activities in the euglycemic individual, what percentage of glucose is reabsorbed by the proximal convoluted tubules? a guaranteed residual multiple choice question. increases the present value of lease payments. can increase or decrease the present value of lease payments depending on the lease term. decreases the present value of lease payments. does not affect the present value of lease payments.