A 12-V battery is connected across a device with variable resisstance. As the resistance of the device increases, determine whether the following quantities increase, decrease, or remain unchanged. Indicate your answers with I, D, or U respectively.

a. The current through the device
b. The voltage across the device
c. The power consumed by the device

Answers

Answer 1
the answer is the current through the device

Related Questions

abrief history of hand writing

Answers

Recognizable systems of writing developed in 3 major cultures within 1200 years of each other. Around 3000 BC Mesopotamian cuneiform (Sumerian, Akkadian, Elamite, and others) developed, Egyptian hieroglyphs around 2800 BC, and the precursor to Kanji Chinese around 1800 BC.

In which type of mixture do the physically distinct component parts each have distinct properties?

Answers

Answer:

In heterogeneous mixture do the physically distinct component parts each have distinct properties.

A long, current-carrying solenoid with an air core has 1550 turns per meter of length and a radius of 0.0240 m. A coil of 200 turns is wrapped tightly around the outside of the solenoid, so it has virtually the same radius as the solenoid. What is the mutual inductance of this system

Answers

Answer:

[tex]M=7.05*10^{-4}[/tex]

Explanation:

From the question we are told that:

Coil one turns N_1=1550 Turns/m

Radius [tex]r=0.0240m[/tex]

Turns 2 [tex]N_2=200N[/tex]

Generally the equation for area is mathematically given by

[tex]A=\pi*r^2[/tex]

[tex]A=\pi*0.024^2[/tex]

[tex]A=\1.81*10^{-3} m^2[/tex]

Therefore

The mutual inductance of this system is

[tex]M=\mu*N_1*N_2*A[/tex]

[tex]M=(4 \pi*10^{-7})*1550*200*1.81*10^{-3}[/tex]

[tex]M=7.05*10^{-4}[/tex]

how does the use of standard units of measurement solve problems in measurement regarding validity and reliabiility? explain it​

Answers

Answer:

Reliability can be estimated by comparing different versions of the same measurement. Validity is harder to assess, but it can be estimated by comparing the results to other relevant data or theory.

An artificial satellite circling the Earth completes each orbit in 125 minutes. (a) Find the altitude of the satellite.(b) What is the value of g at the location of this satellite?

Answers

Answer:

(a) Altitude = 1.95 x 10⁶ m = 1950 km

(b) g = 5.9 m/s²

Explanation:

(a)

The time period of the satellite is given by the following formula:

[tex]T^2 = \frac{4\pi^2r^3}{GM_E}[/tex]

where,

T = Time period = (125 min)([tex]\frac{60\ s}{1\ min}[/tex]) = 7500 s

r = distance of satellite from the center of earth = ?

G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²

[tex]M_E[/tex] = Mass of Earth = 6 x 10²⁴ kg

Therefore,

[tex](7500\ s)^2 = \frac{4\pi^2r^3}{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(6\ x\ 10^{24}\ kg)}\\\\r^3 = \frac{(7500\ s)^2(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(6\ x\ 10^{24}\ kg)}{4\pi^2}\\\\r = \sqrt[3]{5.7\ x\ 10^{20}\ m^3} \\[/tex]

r = 8.29 x 10⁶ m

Hence, the altitude of the satellite will be:

[tex]Altitude = r - radius\ of\ Earth\\Altitude = 8.29\ x\ 10^6\ m - 6.34\ x\ 10^6\ m[/tex]

Altitude = 1.95 x 10⁶ m = 1950 km

(b)

The weight of the satellite will be equal to the gravitational force between satellite and Earth:

[tex]Weight = Gravitational\ Force\\\\M_sg = \frac{GM_EM_s}{r^2}\\\\g = \frac{GM_E}{r^2}\\\\g = \frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(6\ x\ 10^{24}\ kg)}{(8.23\ x\ 10^6\ m)^2}[/tex]

g = 5.9 m/s²

Two objects moving with a speed v travel in opposite directions in a straight line. The objects stick together when they collide, and move with a speed of v/2 after the collision.

Required:
a. What is the ratio of the final kinetic energy of the system to the initial kinetic energy?
b. What is the ratio of the mass of the more massive object to the mass of the less massive object?

Answers

Answer:

Explanation:

Let the mass of objects be m₁ and m₂ .

Total kinetic energy = 1/2 m₁ v² + 1/2 m₂ v²= 1/2 ( m₁ + m₂ ) v²

Total kinetic energy after collision= 1/2 ( m₁ + m₂ ) v² / 4  =  1/2 ( m₁ + m₂ ) v² x .25

final KE / initial KE = 1/2 ( m₁ + m₂ ) v² x .25 / 1/2 ( m₁ + m₂ ) v²

= 0.25

b )

Applying law of conservation of momentum to the system . Let m₁ > m₂

m₁ v -  m₂ v = ( m₁ + m₂ ) v / 2

m₁ v -  m₂ v = ( m₁ + m₂ ) v / 2

m₁  -  m₂  = ( m₁ + m₂ )  / 2

2m₁ - 2 m₂ = m₁ + m₂

m₁ = 3m₂

m₁ / m₂ = 3 / 1

Answer:

(a) The ratio is 1 : 4.

(b) The ratio is 1 : 3.

Explanation:

Let the mass of each object is m and m'.

They initially move with velocity v opposite to each other.

Use conservation of momentum

m v - m' v = (m + m') v/2

2 (m - m')  = (m + m')

2 m - 2 m' = m + m'

m = 3 m' .... (1)

(a) Let the initial kinetic energy is K and the final kinetic energy is K'.

[tex]K = 0.5 mv^2 + 0.5 m' v^2 \\\\K = 0.5 (m + m') v^2..... (1)[/tex]

[tex]K' = 0.5 (m + m') \frac{v^2}{4}.... (2)[/tex]

The ratio is

K' : K = 1 : 4

(b) m = 3 m'

So, m : m' = 3 : 1

A wheel rotates at an angular velocity of 30rad/s. If an acceleration of 26rad/s2 is applied to it, what will its angular velocity be after 5.0s

Answers

A wheel rotated at an angular velocity of 30 roads . if an acceleration of 26road is applied to it waht eill be the ans

Two positive charges ( 8.0 mC and 2.0 mC) are separated by 300 m. A third charge is placed at distance r from the 8.0 mC charge in such a way that the resultant electric force on the third charge due to the other two charges is zero. The distance r is

Answers

Answer:

[tex]r=200m[/tex]

Explanation:

From the question we are told that:

Charges:

[tex]Q_1=8.0mC[/tex]

[tex]Q_2=2.0mC[/tex]

[tex]Q_3=8.mC[/tex]

Distance [tex]d=300m[/tex]

Generally the equation for Force is mathematically given by

[tex]F=\frac{kq_1q_2}{r^2}[/tex]

Therefore

[tex]F_{32}=F_{31}[/tex]

[tex]\frac{q_2}{(300-r)^2}=\frac{q_1}{r^2}[/tex]

[tex]\frac{2*10^{-3}}{(300-r)^2}=\frac{8*10^{-3}}{r^2}[/tex]

[tex]r=2(300-r)[/tex]

[tex]r=200m[/tex]

The distance between the two object is fixed at 5.0 m. The uncertainty distance measurement is? The percentage error in the distance is?

Answers

Your answer would be: New force between them will become 1/36 times :)

When an external magnetic flux through a conducting loop decreases in magnitude, a current is induced in the loop that creates its own magnetic flux through the loop. How does that induced magnetic flux affect the total magnetic flux through the loop

Answers

Answer:

Len's law

Explanation:

We can explain this exercise using Len's law

when the magnetic flux decreases, a matic flux appears that opposes the decrease, thus maintaining the value of the initial luxury.

In a calorimetry experiment, three samples A, B, and C with TA> TB> Tc are placed in thermal contact. When the samples have reached thermal equilibrium at a common temperature T, which one of the following must be true?

a. QA > QB >QC
b. QA< 0, QB <0, and Qc > 0
c. T> TB
d. T e. TA > T> Tc

Answers

Answer:

e. TA>T>Tc

Explanation:

a) In this case, we cannot say for sure QA>QB>QC. This is because the magnitude of the heat flow will depend on the specific heat and the mass of each sample. Due to the equation:

[tex]Q=mC_{p}(T_{f}-T_{0})[/tex]

if we did an energy balance of the system, we would get that>

QA+QB+QC=0

For this equation to be true, at least one of the heats must be negative. And one of the heats must be positive.

We don't know either of them, so we cannot determine if this statement is true.

b) We can say for sure that QA<0, because when the two samples get to equilibrum, the temperatrue of A must be smaller than its original temperature. Therefore, it must have lost heat. But we cannot say for sure if QB<0 because sample B could have gained or lost heat during the process, this will depend on the equilibrium temperature, which we don't know. So we cannot say for sure this option is correct.

c) In this case we don't know for sure if the equilibrium temperature will be greater or smaller than TB. This will depend on the mass and specific heat of the samples, just line in part a.

d) is not complete

e) We know for sure that A must have lost heat, so its equilibrium temperature must be smaller than it's original temperature. We know that C must have gained heat, therefore it's equilibrium temperature must be greater than it's original temperature, so TA>T>Tc must be true.

Consider a uniform electric field of 50 N/C directed toward the east. If the voltage measured relative to ground at a given point in the field is 80 V, what is the voltage at a point 1.0 m directly east of the point

Answers

Answer:

30 V

Explanation:

Given that:

The uniform electric field = 50 N/C

Voltage = 80 V

distance = 1.0 m

The potential difference of the electric field = Δ V

E_d = V₁ - V₂

50 × 1 = 80V - V₂

50 - 80 V = - V₂

-30 V = - V₂

V₂ = 30 V

A child weighing 200 N is being held back in a swing by a horizontal force of 125 N, as shown in the image. What is the tension T in the rope that supports the swing in units of Newtons? Note: Please enter only the numerical answer. If you include any units in your answer, your answer will be counted as incorrect. T F= 125 N Weight = 200 N​

Answers

Answer:

75

Explanation:

i am not sure but if 200N boy is being held back then the force that's holding him back must be equal to or greater than his weight. if 125N is already exerted then the tension will be:

T=200-125

= 75

When a car's starter is in use, it draws a large current. The car's lights draw much less current. As a certain car is starting, the current through the battery is 54.0 A and the potential difference across the battery terminals is 9.18 V. When only the car's lights are used, the current through the battery is 2.10 A and the terminal potential difference is 12.6 V. Find the battery's emf.

Answers

Answer:

12.74 V

Explanation:

We are given that

Current, I1=54 A

Potential difference, V1=9.18V

I2=2.10 A

V2=12.6 V

We have to find the battery's emf.

[tex]E=V+Ir[/tex]

Using the formula

[tex]E=9.18+54r[/tex] ....(1)

[tex]E=12.6+2.10r[/tex]  .....(2)

Subtract equation (1) from (2)

[tex]0=3.42-51.9r[/tex]

[tex]3.42=51.9r[/tex]

[tex]r=\frac{3.42}{51.9}=0.0659ohm[/tex]

Using the value of r in equation (1)

[tex]E=9.18+54(0.0659)[/tex]

[tex]E=12.74 V[/tex]

What fraction of the total energy of a SHO is kinetic when the displacement is one third the amplitude

Answers

Answer:

The fraction of kinetic energy to the total energy is [tex]\frac{K}{T}=\frac{8}{9}[/tex].

Explanation:

displacement is one third of the amplitude.

Let the amplitude is A.

x= A/3

The kinetic energy of the body executing SHM is

[tex]K = 0.5 mw^2(A^2 - x^2)\\\\K = 0.5 m w^2 \left ( A^2 -\frac{A^2}{9} \right )\\\\K = 0.5 mw^2\times \frac{8A^2}{9}......(1)[/tex]

The total energy is

[tex]T =0.5 mw^2A^2 ..... (2)[/tex]

Divide (1) by (2)

[tex]\frac{K}{T}=\frac{8}{9}[/tex]

Can an electron be diffracted? Can it exhibit interference?

Answers

Answer:

Yeah, it can be diffracted. Though it depends on a diffracting medium.

It must have some magnetic fields .

Forexample; X-ray diffraction where electrons are diffracted to the target filament.

An eagle flying at 35 m/s emits a cry whose frequency is 440 Hz. A blackbird is moving in the same direction as the eagle at 10 m/s. (Assume the speed of sound is 343 m/s.)
(a) What frequency does the blackbird hear (in Hz) as the eagle approaches the blackbird?
Hz
(b) What frequency does the blackbird hear (in Hz) after the eagle passes the blackbird?
Hz

Answers

Answer:

a)  [tex]F=475.7Hz[/tex]

b)  [tex]F'=410.899Hz[/tex]

Explanation:

From the question we are told that:

Velocity of eagle [tex]V_1=35m/s[/tex]

Frequency of eagle [tex]F_1=440Hz[/tex]

Velocity of Black bird [tex]V_2=10m/s[/tex]

Speed of sound [tex]s=343m/s[/tex]

a)

Generally the equation for Frequency is mathematically given by

 [tex]F=f_0(\frac{v-v_2}{v-v_1})[/tex]

 [tex]F=440(\frac{343-10}{343-35})[/tex]

 [tex]F=475.7Hz[/tex]

b)

Generally the equation for Frequency is mathematically given by

 [tex]F'=f_0(\frac{v+v_2}{v+v_1})[/tex]

 [tex]F'=440(\frac{343+10}{343+35})[/tex]

 [tex]F'=410.899Hz[/tex]

g A CD is spinning on a CD player. You open the CD player to change out the disk and notice that the CD comes to rest after 15 revolutions with a constant deceleration of 120 r a d s 2 . What was the initial angular speed of the CD

Answers

Answer:

[tex]\omega_1=150rads/sec[/tex]

Explanation:

From the question we are told that:

Number of Revolution [tex]N=15=30\pi[/tex]

Deceleration [tex]d= -120 rads/2[/tex]

Generally the equation for  initial angular speed [tex]\omega_1[/tex] is mathematically given by

 [tex]\omega_2^2=\omega_1^2 +2(d)(N)[/tex]

 [tex]0=\omega_1^2 +2(-120)(20 \pi)[/tex]

 [tex]\omega_1^2=7200 \pi[/tex]

 [tex]\omega_1=150rads/sec[/tex]

Nhiệt dung riêng của một chất là ?

Answers

Answer:

enchantment table language

Explanation:

enchantment Language table

Suppose a 42-turn coil lies in the plane of the page in a uniform magnetic field that is directed into the page. The coil originally has an area of 0.125 m2. It is stretched to have no area in 0.100 s. What is the magnitude (in V) and direction (as seen from above) of the average induced emf if the uniform magnetic field has a strength of 1.40 T

Answers

Answer:

EMF =  73.5 volts

Explanation:

Given that,

The number of a coil, N = 42

The area of the coil, A = 0.125 m²

It is stretched to have no area in 0.100 s

The magnetic field strength is 1.4 T.

We need to find the average induced emf in the coil. We know that,

[tex]\epsilon=N\dfrac{d\phi}{dt}[/tex]

[tex]\epsilon=N\dfrac{BA}{dt}\\\\\epsilon=42\times \dfrac{1.4\times 0.125}{0.1}\\\\=73.5\ V[/tex]

So, the induced emf in the coil is 73.5 volts.

A monochromatic light falls on two narrow slits that are 4.50 um apart. The third destructive fringes which are 35° apart were formed at a screen 2m from the light source. The light source is 0.30 m from the slits. () Calculate Ym. (4 marks) Compute the wavelength of the light. (4 marks)​

Answers

Answer:

 y = 1.19 m  and λ = 8.6036 10⁻⁷ m

Explanation:

This is a slit interference problem, the expression for destructive interference is

          d sin θ = m λ

indicate that for the angle of θ = 35º it is in the third order m = 3 and the separation of the slits is d = 4.50 10⁻⁶ m

          λ = d sin  θ / m

let's calculate

          λ = 4.50 10⁻⁶ sin 35  /3

          λ = 8.6036 10⁻⁷ m

for the separation distance from the central stripe, we use trigonometry

         tan θ= y / L

         y = L tan θ

the distance L is measured from the slits, it indicates that the light source is at x = 0.30 m from the slits

         L = 2 -0.30

         L = 1.70 m

           

let's calculate

        y = 1.70 tan 35

        y = 1.19 m

1. A positive electric charge in a region of changing electric potential will: A. move in the direction of decreasing potential B. move in the direction of increasing potential C. move in an undetermined way; we need more information D. remain at rest

Answers

Answer:

The correct option is (B).

Explanation:

The electric potential is the amount of work energy needed to move a unit of electric charge from a reference point to the specific point in an electric field. The electric potential due to a point charge is given by :

[tex]V=\dfrac{kQ}{r}[/tex]

Where

k is the electrostatic constant

Q is the electric charge

r is the distance from the charge

So, a positive electric charge in a region of changing electric potential will move in the direction of increasing potential.

• Explain how sound travels ​

Answers

Sound is a type of energy made by vibrations. These vibrations create sound waves which move through mediums such as air, water and wood. When an object vibrates, it causes movement in the particles of the medium. This movement is called sound waves, and it keeps going until the particles run out of energy.

Sound is a type of energy made by vibrations. These vibrations create sound waves which move through mediums such as air, water and wood. When an object vibrates, it causes movement in the particles of the medium. This movement is called sound waves, and it keeps going until the particles run out of energy.

Question 4 of 5
How can the Fitness Logs help you in this class?
O A. They can't; the Fitness Logs are only useful to your teacher.
B. They show your parents how much you're learning.
C. They let you keep track of your thoughts, feelings, and progress.
D. They help you evaluate yourself for your final grade.
SUBMIT

Answers

Answer:

C is the right answer

Explanation:

fitness logs is a great way to track your progress. You can easily look back and see how you have progressed over time. In addition, it can help you plan and prepare for future workouts, as well as identify patterns of what seems to work well for you and when you have the most success

hope it was useful for you

A 0.20 kg mass on a horizontal spring is pulled back a certain distance and released. The maximum speed of the mass is measured to be 0.30 m/s. If, instead, a 0.40 kg mass were used in this same experiment, choose the correct value for the maximum speed.

a. 0.40 m/s.
b. 0.20 m/s.
c. 0.28 m/s.
d. 0.14 m/s.
e. 0.10 m/s.

Answers

Answer:

b. 0.20 m/s.

Explanation:

Given;

initial mass, m = 0.2 kg

maximum speed,  v = 0.3 m/s

The total energy of the spring at the given maximum speed is calculated as;

K.E = ¹/₂mv²

K.E = 0.5 x 0.2 x 0.3²

K.E = 0.009 J

If the mass is changed to 0.4 kg

¹/₂mv² = K.E

mv² = 2K.E

[tex]v = \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2\times 0.009}{0.4} } \\\\v = 0.21 \ m/s\\\\v \approx 0.20 \ m/s[/tex]

Therefore, the maximum speed is 0.20 m/s

Two distinct systems have the same amount of stored internal energy. 500 J are added by heat to the first system and 300 J are added by heat to the second system. What will be the change in internal energy of the first system if it does 200 J of work? How much work will the second system have to do in order to have the same internal energy?

Answers

Answer:

The change in the internal energy of the first system is 300 J

The second system will do zero work in order to have the same internal energy.

Explanation:

Given;

heat added to the first system, Q₁ = 500 J

heat added to the second system, Q₂ = 300 J

work done by the first system, W₁ = 200 J

The change in the internal energy of the system is given by the first law of thermodynamics;

ΔU = Q - W

where;

ΔU is the change in internal energy of the system

The change in the internal energy of the first system is calculated as;

ΔU₁ = Q₁ - W₁

ΔU₁ = 500 J - 200 J

ΔU₁ = = 300 J

The work done by the second system to have the same internal energy with the first.

ΔU₁ = Q₂ - W₂

W₂ = Q₂ - ΔU₁

W₂ = 300 J - 300 J

W₂ = 0

The second system will do zero work in order to have the same internal energy.

The USDA recommends that women consume about 2000 Calories per day and men consume about 2500 Calories per day. How much average power use (in Watts) does this imply for a human body

Answers

Answer:

   1500 W to 2200 W

Explanation:

Every person does work in his daily day to day life. A person needs energy in order to perform work. And the energy consumed by an individual while performing a daily work is directly responsible to the mount of oxygen consumed by the person.

The USDA is the federal agency which looks after the food and agriculture matters of the US government. It deals with and formulates different policies and laws for the country and it s people. It recommends about 2000 calories per day for women and for men it recommends about 2500 calorie per days of food intake.

Accordingly, the average power required by a human body for doing regular work is in the range of 1500 W to 2200 W.

A building is being knocked down with a wrecking ball, which is a big metal sphere that swings on a 15-m-long cable. You are (unwisely!) standing directly beneath the point from which the wrecking ball is hung when you notice that the ball has just been released and is swinging directly toward you. How much time do you have to move out of the way? answer in seconds.

Answers

Answer:

Time to move out of the way = 1.74 s

Explanation:

Time to move out of the way is one fourth of period = 6.95/4 = 1.74 seconds.

Time to move out of the way = 1.74 s

The mass of a hot-air balloon and its occupants is 381 kg (excluding the hot air inside the balloon). The air outside the balloon has a pressure of 1.01 x 105 Pa and a density of 1.29 kg/m3. To lift off, the air inside the balloon is heated. The volume of the heated balloon is 480 m3. The pressure of the heated air remains the same as that of the outside air. To what temperature in kelvins must the air be heated so that the balloon just lifts off

Answers

Answer:

In order to lift off the ground, the air in the balloon must be heated to 710.26 K

Explanation:

Given the data in the question;

P = 1.01 × 10⁵ Pa

V = 480 m³

ρ = 1.29 kg/m³

M = 381 kg

we know that; R = 8.31 J/mol.K and the molecular mass of air μ = 29 × 10⁻³ kg/mol

let F represent the force acting upward.

Now in a condition where the hot air balloon is just about to take off;

F - Mg - m[tex]_g[/tex]g = 0

where M is the mass of the balloon and its occupants, m[tex]_g[/tex] is the mass of the hot gas inside the balloon.

the force acting upward F = Vρg

so

Vρg - Mg - m[tex]_g[/tex]g = 0

solve for m[tex]_g[/tex]

m[tex]_g[/tex] = ( Vρg - Mg ) / g

m[tex]_g[/tex] =  Vρg/g - Mg/g

m[tex]_g[/tex] =  ρV - M ------- let this be equation 1

Now, from the ideal gas law, PV = nRT

we know that number of moles n = m[tex]_g[/tex] / μ

where μ is the molecular mass of air

so

PV = (m[tex]_g[/tex]/μ)RT

solve for T

μPV = m[tex]_g[/tex]RT

T = μPV / m[tex]_g[/tex]R -------- let this be equation 2

from equation 1 and 2

T = μPV / (ρV - M)R

so we substitute in our values;

P = 1.01 × 10⁵ Pa

V = 480 m³

ρ = 1.29 kg/m³

M = 381 kg

we know that; R = 8.31 J/mol.K and the molecular mass of air μ = 29 × 10⁻³ kg/mol

T = [ (29 × 10⁻³) × (1.01 × 10⁵) × 480 ] / [ (( 1.29 × 480 ) - 381)8.31 ]

T =  1405920 / 1979.442

T =  710.26 K

Therefore, In order to lift off the ground, the air in the balloon must be heated to 710.26 K

The temperature required for the air to be heated is 710.26 K.

Given data:

The mass of a hot air-balloon is, m = 381 kg.

The pressure of air outside the balloon is, [tex]P = 1.01 \times 10^{5} \;\rm Pa[/tex].

The density of air is, [tex]\rho = 1.29 \;\rm kg/m^{3}[/tex].

The volume of heated balloon is, [tex]V = 480 \;\rm m^{3}[/tex].

The condition where the hot air balloon is just about to take off is as follows:

[tex]F-mg - m'g =0[/tex]

Here,

m' is the mass of hot gas inside the balloon and g is the gravitational acceleration and F is the force acting on the balloon in upward direction. And its value is,

[tex]F = V \times \rho \times g[/tex]

Solving as,

[tex](V \times \rho \times g)-mg - m'g =0\\\\ m'=(V \rho )-m[/tex]

Now, apply the ideal gas law as,

PV = nRT

here, R is the universal gas constant and n is the number of moles and its value is,

[tex]n=\dfrac{m'}{M}[/tex]

M is the molecular mass of gas. Solving as,

[tex]PV = \dfrac{m'}{M} \times R \times T\\\\\\T=\dfrac{P \times V\times M}{m'R}\\\\\\T=\dfrac{P \times V\times M}{(V \rho - m)R}[/tex]

Since, the standard value for the molecular mass of air is, [tex]M = 29 \times 10^{-3} \;\rm kg/mol[/tex]. Then solve for the temperature as,

[tex]T=\dfrac{(1.01 \times 10^{5}) \times 480\times 381}{(480 \times (1.29) - 381)8.31}\\\\\\T = 710.26 \;\rm K[/tex]

Thus, we can conclude that the temperature required for the air to be heated is 710.26 K.

Learn more about the ideal gas equation here:

https://brainly.com/question/18518493

A soap bubble, when illuminated at normal incidence with light of 463 nm, appears to be especially reflective. If the index of refraction of the film is 1.35, what is the minimum thickness the soap film can be if it is surrounded by air

Answers

Answer:

the minimum thickness the soap film can be if it is surrounded by air is 85.74 nm

Explanation:

Given the data in the question;

wavelength of light; λ = 463 nm = 463 × 10⁻⁹ m

Index of refraction; n = 1.35

Now, the thinnest thickness of the soap film can be determined from the following expression;

[tex]t_{min[/tex] = ( λ / 4n )

so we simply substitute in our given values;

[tex]t_{min[/tex] = ( 463 × 10⁻⁹ m ) / 4(1.35)

[tex]t_{min[/tex] = ( 463 × 10⁻⁹ m ) / 5.4

[tex]t_{min[/tex] = ( 463 × 10⁻⁹ m ) / 4(1.35)

[tex]t_{min[/tex] = 8.574 × 10⁻⁸ m

[tex]t_{min[/tex] = 85.74 × 10⁻⁹ m

[tex]t_{min[/tex] = 85.74 nm

Therefore, the minimum thickness the soap film can be if it is surrounded by air is 85.74 nm

Other Questions
Evaluate f(x) when x= 6.f(x)= {6x^2 +2 if 6 < x What are two eating disorders associated with Body Composition? Explain the negative effects on each. What roles does the media play in bodyshaming? The sun was shining on the sea shining with all his might what figurative language is this? It takes at least 3 lines to make a closed figure true or false Aliza is drawing a model of the community swimming pool on grid paper. Each square on the grid is 20 feet by 20feet. Find the tangent line equations for the given functions at the given point(s): f(x) = tan x + 9 sin x at (, 0) Pls help! I need to finish my test :/When certain stems from a plant grow outward along the ground and establish new roots and shoots , this is reproduction usingA: tubersB: runners C: layering D: corms Part CNext, you'll write a comparison of rhetoric in Stantons speech "A Plea for the Oppressed" and Lewis's speech at the King Memorial groundbreaking. First, plan out your analysis by answering the questions in the table.ANSWER: PLATOA Plea for the Oppressed by Lucy StantonWhat is the speakers purpose or point of view?What is a rhetorical appeal that Stanton makes to advance her purpose or point of view?How does Stanton use a rhetorical device to advance her purpose or point of view?Reformers should all work together to end slavery.Stanton uses a logos appeal to show that the rationale for ending slavery aligns perfectly with their own values.Stanton uses an extended metaphor that compares slavery to war to show that peace activists must support the abolition of slavery.Comparing Rhetoric in Stantons A Plea for the Oppressed and Lewiss Speech at the King Memorial GroundbreakingHow does Stantons rhetoric compare with Lewiss? Lewis has built-in ethos as a representative and friend of Kings. Stanton cannot rely on ethos as much but makes a persuasive case through logos. Find the volume of this object.Use 3 for aVolume of a CylinderV=77r2hVolume of a ConeV= r2h38 in4 in-13 inV~ [?]in3Help Find the volume of this solid. Select three physical forms of storage. USB drive Primary cache Magnetic storage Secondary cache Dynamic RAM Optical drive The compound chromium(II) chloride is a strong electrolyte. Write the transformation that occurs when solid chromium(II) chloride dissolves in water. Be sure to specify states such as (aq) or (s). Given that, 1 Chinese yuan = 0.09, convert 185 into Chinese yuan. Give your answer to the nearest yuan. What do they ask on flvs Spanish 1 module 2 DBA? The heights of 200 adults were recorded and divided into two categoriesWhich two-way frequency table correctly shows the marginal frequencies An organic compound has the empirical formula C2H4O. what is the compound?a. butanoic acidb. butanolc. ethanoic acidd. ethanol Find the area of the trapezoid below in square centimeters (cm). The area of the trapezoid issquare centimeters. Enter the answer as decimal number14 cm8 cm7 cm8 cm21 cmThe solution is Explain the entry qualification with study duration for engineering and architecture. You are dealt one card from a standard 52-card deck. Find the probability of being dealt a diamond Find the area of the shaded regions: the green is the shaded areaPLS HELP ME!!!! I NEED THE ANSWER BY THIS EVENING CUZ I HAVE RSM TOMORROW. PLS HELP!!!!!