8.310x10^2 – 7.210x10^1

[?]x10^[?]​

Answers

Answer 1

Answer:

[tex]7.589\times 10^{2}[/tex]

Explanation:

The expression can be solved mathematically as follows:

1) [tex]8.310\times 10^{2}-7.210\times 10^{1}[/tex] Given

2) [tex]8.310\times 10^{1+1} - 7.210\times 10^{1}[/tex] Definition of sum

3) [tex](8.310\times 10^{1})\times 10^{1}-7.210\times 10^{1}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Associative property

4) [tex](8.310\times 10^{1}-7.210)\times 10^{1}[/tex] Distributive property

5) [tex](83.100-7.210)\times 10^{1}[/tex] Multiplication

6) [tex]75.89\times 10^{1}[/tex] Subtraction.

7) [tex](7.589\times 10^{1})\times 10^{1}[/tex] Multiplication/Associative property

8) [tex]7.589\times (10^{1}\times 10^{1})[/tex] Associative property

9) [tex]7.589\times 10^{2}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Result


Related Questions

Determinación de pH Expresa las siguientes concentraciones de [H+ ] en función del pH • [H+] = 0.001 M • [H+] = 0.002 M • [H+] = 2.45X10-4 M • [H+] = 5.2X10-9 M • [H+] = 0.04 M

Answers

Answer:

• pH = 3.0

• pH = 2.70

• pH = 3.61

• pH = 8.28

• pH = 1.40

Explanation:

El pH es una medida en química usada para determinar el grado de acidez o basicidad en una solución.

Se define como:

pH = -log₁₀ [H⁺]

El - logaritmo de la concentración molar de H⁺

Para las concentraciones de H⁺ dadas:

• [H+] = 0.001 M

pH = -log (0.001M) = 3

pH = 3.0

• [H+] = 0.002 M

pH = -log (0.002M)

pH = 2.70

• [H+] = 2.45X10-4 M

pH = -log (2.45X10-4 M )

pH = 3.61

• [H+] = 5.2X10-9 M

pH = -log (5.2X10-9 M)

pH = 8.28

• [H+] = 0.04 M

pH = -log (0.04M)

pH = 1.40

the density is 5.4 g/mL and the volume is 12.9 mL.

Answers

Answer:

69.66 g

Explanation:

We have the following from the question;

Density of the substance = 5.4 g/ml

Volume of substance = 12.9 ml

Mass of substance= the unknown

Since we have both density and volume of the substance, the question must be for us to obtain the mass of the substance, hence;

Density= mass/volume

Mass= Density × volume

Mass = 5.4 g/ml × 12.9 ml

Mass= 69.66 g

What is 9.871 x 10^-3 in standard form? *

Answers

Answer:

0.009871

Explanation:

[tex] 9.871\times 10^{-3} = 0.009871[/tex]

Answer:

.009871

Explanation:

If the temperature of a gas increased from 100K to 200K and the volume of a gas decreased from 20L to 10L, what is the new pressure I’d the original pressure was 100 kPa?

Answers

Answer:

400 kPa

Explanation:

using General Gas Law

[tex] \frac{100 \times 20}{100} = \frac{p \times 10}{200} [/tex]

[tex]p = 400[/tex]

The concept combined gas law is used here to determine the new pressure of the gas. The pressure of the gas obtained is 400 kPa.

What is combined gas law?

The equation connecting the volume, pressure and temperature of a gas can be represented mathematically by an equation called the combined gas law. In this equation the temperature should be always in Kelvin.

The combined gas law is also defined as the ideal gas law without Avogadro's law. It is the combination of Boyle's law, Charles's law and Gay-Lussac's law. The equation is given as:

PV/T = k

Here 'P' is the pressure, 'V' is the volume, 'T' is the temperature and 'k' is a constant. The equation for two gases of different volumes and temperature is:

P₁V₁ / T₁ = P₂V₂ / T₂

Then P₂ = P₁V₁T₂ / T₁V₂

Here the new pressure P₂ is:

P₂ = 100 × 20 × 200 / 100 × 10

P₂ = 400 kPa.

Thus the new pressure is 400 kPa.

To know more about the combined gas law , visit;

https://brainly.com/question/13538773

#SPJ5      

     

Why does science need to.change its view on ideas overtime?

Answers

Explanation:

A scientific idea is an explanation for how something works, or the truth about some aspect of the world, that was figured out using the scientific process. ... Scientific ideas change over time as the evidence improves. The more experiments they do , and the more data they collect, the better the scientific ideas become.

how many nitrogen atoms are in 18.8 g of barium nitride

Answers

18.8gBa(NO3)2 》》》》gN 》》》》 2.016gN



You need 100.00 mL of H20 and 5.00 mL of

liquid plant food to make a solution for your

plants. You forgot to bring a measuring cup

out to the greenhouse, but you do have a scale

and know that the density of H2O is 1.00

g/cm", the density of liquid plant food is 1.21

g/cm' and 1 cm° = 1 mL. How much of the

liquid plant food would you use?

Answers

Answer:

6.05 g

Explanation:

Use the density to convert the volume to a weight.

(5.00 mL) × (1.21 g/mL) = 6.05 g liquid plant food

You will need 6.05 g liquid plant food.

an atom Y has atomic number 13. It loses three electrons in order to be stable.

i.) What is the proton number and electron number of the atom

a)before it loses electrons
b) after losing electrons


ii.) name the tyoe of ion formed by the atom when it loses three electrons
Show by illustration​

Answers

(A) proton number= 13 electron =13
(B) proton number=10 electron =10

An atom Y has atomic number 13, so the no. of electrons and protons in it is 13 and after loses it will form cation and no. of electrons will become 10.

What is atomic number?

Atomic number of an atom is equal to the number of electrons or protons present in that atom.

Before loses electrons

Number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.

After loses 3 electrons

Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.

Name of the ion which is formed by the atom is cation as it bears positive charge on it.

So, number of protons is always same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10.

To know more about atomic number, visit the below link:
https://brainly.com/question/1805828

Express each of the following in standard form.
3.6 x 101


6.452 x 102


8.77 x 10-1


6.4 x 10-3

Answers

Answer:3.6 x 101 or 8.77 x 10-1

clearly distinguish between science and technology​

Answers

Answer:

The words science and technology can and often are used interchangeably. But the goal of science is the pursuit of knowledge for its own sake while the goal of technology is to create products that solve problems and improve human life. Simply put, technology is the practical application of science.

Explanation:

Check the following images

Hope it helps!!!

Please mark it as Brainliest ( the crown icon)

Undulation in sandy material is called
cross-beds
ripple marks
mud cracks
O fossils

Answers

Answer:

ripple marks

Explanation:

Undulation is defined as the to and fro wavelike motion in a fluid or elastic medium.

Undulation in sandy material is called ripple marks because ripple marks are the sediments of rocks that show wavy structure at its surface due to agitation by water and wind.

Hence, the correct answer is "ripple marks".

If each geometric shape represents a different type of atom, and atoms that are touching have chemically bonded with each other, which best describes this model? * 1. An element 2. A compound 3. A homogeneous mixture of two compounds 4. A heterogeneous mixture of two compounds 5. A homogeneous mixture of four elements 6. A heterogeneous mixture of four elements

Answers

Answer:

The correct option is;

3. A homogeneous mixture of two compounds

Explanation:

An homogeneous mixture is one where the components of the mixture are evenly dispersed such that the individual components cannot be seen to be isolated and distinguishable and having a constant composition of the constituents

The image displays three atoms (red circle, cyan triangle, and orange rectangle). The red circle appear to be bonded in pairs while the cyan triangles are bonded to the orange rectangles making a total of two compounds

The arrangement of the compounds in the mixture appear to be very evenly distributed to suggest an homogeneous mixture

The visibility of the compounds should be for an illustrative purpose.

list one difference between blended fibres and regenerating synthetic fibres​

Answers

Answer:

blended is better than synthetic fibre. because blended fabrics have quality of synthetic and natural fibres so they are more better than fabrics. For example terrycot. Blended Fibres are considered better than individual synthetic fibres because they show the advantages of 2 or more fibres.

Which best describes the importance of the microscope to the development of the cell theory?

Answers

Answer:

The answer is "all the cells are too small, which is not seen by the naked eye, that's why we use a microscope to see it".

Explanation:

In the given question the choices were missing so, we define the correct answer only.

Cells are the essential building blocks of all living entities. There will be trillions of cells within the body. They construct a body shape, absorb nutrients, transform them into energy, and conduct specialized features.  

It provides stability and guidance, encourages mitotic cell development, encourages active and passive transfer, generates energy, induces metabolic processes, and contraceptive support.

Difference between atomic number and atomic weight any 2 points

Answers

Answer:

According to the definitions given, atomic mass which is also called atomic weight is the measured total mass of an element's atom. Whereas, atomic number is nothing but the total number of neutrons and protons in the nucleus of an atom....

can u talk to in comment section

Please help...

Draw a diagram showing the bonding in:

a) Tetrachloromethane [CCI4]

Answers

Answer:

here u go! ................

Answer:

Hope this is ok :))

Explanation:

The following water measurements were made: 18 mL of water were measured with a beaker, 128.7 mL of water were measured in a graduated cylinder and 23.45 mL of water were measured in a buret. All of these water samples were then poured together in one container. What total volume of water should be reported, when significant digits are taken into account?

Answers

Answer:

170 mL

Explanation:

The total volume to be reported should be 170 mL.

According to the significant rule in mathematical operations, final answers are usually reported to reflect the accuracy of the least accurate number.

In this case, the least accurate of all the volumes has zero significant digits after the decimal, hence, the final answer after the mathematical operation should also have no significant digits after the decimal.

           18 + 128.7 + 23.45 = 170.15

Therefore, the total volume to be reported when significant digits are taken into account would be 170 mL.

What element is depicted by the following electron configuration:

(The electron configuration is in the image)




A. None of these
B. Oxygen
C. Chlorine
D. Sulfur

Answers

Explanation:

Your required answer is sulpher.

Hope it helps...

How many molecules of sodium oxide will be created if 275 grams of sodium reacts with excess oxygen? Given the equation: 4Na + O2 -> 2Na2O

Answers

Answer:

3.60 x 10^24 molecules Na2O

Explanation:

Identify the difference between natural and artificial dyes.

Answers

Answer:

Natural dyes, although pure from chemicals, are often times more expensive than chemical dyes.

Answer: natural dyes is dye that it is anything that grow on earth that haven't been possessed and artificial dye mean that it is good for something in your body or something else

Explanation:i search it up

brainliest to whoever gets it the soonest, what SI unit do you use to measure the length of a book, and what tool and unit for the volume of a box?

Answers

The most appropriate SI unit used to measure the length of a book would be Centimeters.

The most appropriate SI unit to use for the volume of a book is centimeters cubed

PS: I am also a JoJo fan

Answer:

The SI unit of volume is the cubic meter (m 3 ), which is the volume occupied by a cube that measures 1 m on each side. This very large volume is not very convenient for typical use in a chemistry laboratory. A liter (L) is the volume of a cube that measures 10 cm (1 dm) on each side.

which of the following is a scientific question about the cuttlefish?

Answers

Answer:

How does the cuddle fish change its colors?

Please tell me if I'm wrong.

Ag2S + Al(s) = Al2S3 + Ag(s) (unbalanced)

1) What would the overall potential for this cell be?

2) Write the standard cell notation for an electrochemical cell consisting of an anode and cathode of the same types as in this experiment, connected through a salt bridge.

Answers

Answer:

1. 0.97 V

2. [tex]Al_(_s_)/Al^+^3~_(_a_q_)~//~Ag^+~_(_a_q_)/Ag_(_s_)[/tex]

Explanation:

In this case, we can start with the half-reactions:

[tex]Ag^+~_(_a_q_)->~Ag_(_s_)[/tex]

[tex]Al_(_s_)~->~Al^+^3~_(_a_q_)[/tex]

With this in mind we can add the electrons:

[tex]Ag^+~_(_a_q_)+~e^-~->~Ag_(_s_)[/tex]  Reduction

[tex]Al_(_s_)~->~Al^+^3~_(_a_q_)+~3e^-~[/tex] Oxidation

The reduction potential values for each half-reaction are:

[tex]Ag_2S~+~e^-~->~Ag_(_s_)~+~S^-^2~_(_a_q_)[/tex] - 0.69 V

[tex]Al^+^3~_(_a_q_)+~2e^-~->~Al_(_s_)[/tex] -1.66 V

In the aluminum half-reaction, we have an oxidation reaction, therefore we have to flip the reduction potential value:

[tex]Al_(_s_)~->~Al^+^3~+~2e^-~[/tex] +1.66 V

Finally, to calculate the overall potential we have to add the two values:

1.66 V - 0.69 V = 0.97 V

For the second question, we have to keep in mind that in the cell notation we put the anode (the oxidation half-reaction) in the left and the cathode (the reduction half-reaction) in the right. Additionally, we have to use "//" for the salt bridge, therefore:

[tex]Al_(_s_)/Al^+^3~_(_a_q_)~//~Ag^+~_(_a_q_)/~Ag_(_s_)[/tex]

I hope it helps!

• Calculate relative formula masses from formulae and
from balanced equations?

Answers

Answer:

Explanation:

Simple molecules have very small masses. Instead of writing their actual masses in grams or kilograms, we usually use their relative formula masses. These are calculated using the chemical formula and the relative atomic masses of the elements in it.

Relative formula mass

Relative atomic mass has the symbol Ar. The Ar for an element is a measure of the mass of its atoms compared to the mass of carbon-12 atoms. The greater the Ar value, the more mass an element's atoms have. The periodic table shows the Ar value for each element. For example, the Ar for carbon is 12, and the Ar for magnesium is 24. This means that a magnesium atom has twice the mass of a carbon atom.

Calculating relative formula mass

Relative formula mass is given the symbol Mr. To calculate the Mr for a substance:

work out how many atoms of each element there are in the chemical formula

add together the Ar values for all the atoms of each element present

For example, the formula for carbon dioxide is CO2. It consists of one carbon atom (Ar = 12) and two oxygen atoms (Ar = 16):

Mr of CO2 = 12 + 16 + 16 = 44

It could also be calculated this way:

Mr of CO2 = (1 × 12) + (2 × 16) = 12 + 32 = 44

Ar and Mr values are just numbers. They have no units because they are relative masses.

Relative formula masses of ionic compounds

Ionic compounds such as sodium chloride do not exist as molecules. However, their relative formula masses are calculated in the same way. The formulae used are their empirical formulae.

1. The Tyndall Effect is most useful for distinguishing between: *
a solute and a solvent
O a suspension and a solution
a colloid and a suspension
a colloid and a solution

Answers

Answer:

a colloid and a solution

Explanation:

When solute particles completely dissolve in a solvent, a true solution is formed. The solute particles in this case are so little that they can not be seen with naked eyes. A true solution does not scatter rays of light.

In a false solution, the solute particles are larger than the solute particles in true solutions but are not large enough to be seen with naked eyes. False solutions scatter rays of light. False solutions are also called colloids.

The major difference between a solution and a colloid is that colloids scatter light rays (Tyndall effect) while a true solution does not scatter light rays.

Apollo 17 astronauts eugene cernan and harrison schmitt collected the last samples of moon rocks to bring back to earth in 1972 The astronauts took measurements of the moon rocks using three categories not affected by gravity this is because the earth and moon have different forces of gravity which measurement did they not use?



A-Volume
B-Weight
C-Mass
D-Density

Answers

Answer:

The correct answer is B

Explanation:

This question seeks to test the difference between mass and weight.

Mass is a measurement of the amount of matter present in an object. While weight is a measurement of the force of gravity pulling (the mass of) an object. Hence, measuring the weight of the moon rocks in the moon might be a waste since the weight of the object on earth will produce a different value due to the difference in the force of gravity between the earth and the moon.

Answer:

b

Explanation:

What is the PRECAUTION for an Irritant?

Answers

prevent the release of toxic vapored, dusts, mists, or gases into the workplace air

What evidence demonstrates that chlorine in the stratosphere is primarily from man-made chemicals rather than from natural sources such as volcanoes?

Answers

Answer:

The evidence that demonstrated that the Chlorine in the stratosphere is believed to come primarily from CFCs ( Chlorofluorocarbons) rather than from natural sources such as volcanoes was due to the study conducted in which the amount of chlorine in the stratosphere over the past 20 years was measured and it was discovered that there was an increase over the years. This also corresponded with a rise in CFCs over the same period which shows that the chlorine in the stratosphere was from man made chemicals such as chlorofluorocarbons.

Chlorine in the stratosphere is primarily from man-made chemicals rather than from natural sources such as volcanoes is evident as follows;

Discussion;

Most of the chlorine in the stratosphere is there as a result of human activities, as the figure below illustrates.

Many compounds containing chlorine are released at the ground.

Volcanoes can emit large quantities of hydrogen chloride, but this gas is rapidly converted to hydrochloric acid, which dissolves in rain water, ice, and snow and does not reach the stratosphere.

Read more:

https://brainly.com/question/22776037

The reactants of a reaction are 2AgClO3 and Na2CO3. According to the law of
conservation of matter, which of the following could be a product?
O A. NaOH
O B. Ag2CO3
O C. CaCO3
O D. AgNO3

Answers

Answer:

The answer is "Option B"

Explanation:

Law:

In the law of the conservation of matter, states the volume of matter throughout the process remains constant. In any particular case, it is closed to the movement of matter.  It is mostly on conservation of energy means, that the total mass of the products should consider the sum of the mass, which is the reactant of the event of chemical processes.

Reaction:

[tex]2AgClO_3+ Na_2CO_3= Ag_2CO_3+Na_2ClO_3[/tex]

In the above equation when we react to [tex]2AgClO_3[/tex] from the [tex]Na_2CO_3[/tex], it will give [tex]Ag_2CO_3 \ \ \text{and} \ \ Na_2ClO_3[/tex]. that's why option b is correct.

Answer:

Ag2CO3

Explanation:

A straight chain hydrocarbon with the formula C^3H^4 _____.

has a triple C-C bond
has a double C-C bond
is essentially inert
has two double C-C bonds

Answers

Answer:

has two double C-C bonds

Explanation:

A saturated compound is a compound having the full complement of hydrogen atoms for every carbon atom while an unsaturated compound does not contain the full complement of hydrogen atoms for every atom of carbon.

If we look at C3H4, the only possible structure of the compound is H2C=C=CH2. We can see from this arrangement that the compound contains a cumulative double bond. This is the specific structure that fits into one of the descriptions in the options, the compound contains two double bonds.

Other Questions
In cooking class, Shivani measures a stickof butter. It is 13 centimeters long, 3centimeters wide, and 3 centimeters tall. Whatis the volume of the stick of butter? Kelvin wants to know whether he skied without falling more than twice as long as anyone else in his family. His dad tells him that he can check by using the inequality 2f < 223, where f is the time skied in seconds for each person. Plug the values for the time skied by each person into the inequality to find the answer.Lori55 Vanessa265 Devon172 Celia112 Arnold356 You invest $4,000 in a savings account. The account pays 3% annual interest. Howmuch money will be in the savings account after 9 years?$5,124.33$6,003.45$4,938.29$5,219.20 who was the commander of german troops in the north African campaign Pens cost 15 pence each. Rulers cost 20 pence each. Write down an expression for the cost of x pens and x rulers. risk-free assets have a beta of 0 and the market portfolio has a beta of 1. true or false true false The governor has some control over the final appropriations bill through the use of the ________ veto. Group of answer choices Pennsylvania Refining Company is studying the relationship between the pump price of gasoline and the number of gallons sold. For a sample of 14 stations last Tuesday, the correlation was 0.65. Can the company conclude that the correlation is positive Cuando hablamos del concepto de relaciones humanas en que pensamos? Each energy sublevel contains __________ number of electrons. For example, sublevel D can hold up to _______ electrons. A. the same, 10 B. the same, 14 C. a different, 6 D. a different, 10 Write the equation in terms of a rotated x'y'-system using the angle of rotation. Write the equation involving x' and y' in standard form.19x2 + 241/3 xy - 5y2 - 527 = 0; 0 = 30 Which of the following battles was the first Civil War engagement in Indian Territory? A. Battle of Pea Ridge B. Battle of Locust Grove C. Battle of Wilson Creek D. Battle of Round Mountain Racquel deposited $40,000 in an account paying 4.8% annual interest in 2009. She now wants to make four equal annual withdrawals from the account starting with the first withdrawal in 2021. Racquel also wants to have exactly $60,000 left in the account in 2026. How large can each of the annual withdrawals be? 2c+17.6 =6 SOLVE --------------- 4 give your answer as a decimal get brainly The mean number of days to observe rain in a particular city is 20 days with a standard deviation of 2 days. Suppose that the rain pattern is Normally distributed. what is the probability of raining if the number of days are more than 23? A quote (from a song or a book) that shows who you are is... The lines on a 2-cup liquid measuring cup divide each cup into eighths. If you measure 1 3/4 cups of water, between which two quantities can you be certain that your exact measurement will be? A mother and her young child want to play on a seesaw at a playground. The child sits on the end of one side of the seesaw. Where should the mother sit to balance the seesaw?(1 point) at the opposite side of the seesaw on the end at the opposite side of the seesaw towards the middle on the same side of the seesaw towards the middle on the same end as her child if 13 minute video played for 6 minutes what is the amount of percent played What integer is closest to 13/3 divided 2/11 I have been looking at this for while and my brain is going (_)