7. If the impact of the golf club on the ball in the previous question occurs over a time of 2 x 10 seconds, what
force does the ball experience to accelerate from rest to 73 m/s?

Answer:

Option B. O because the net force was 5 N in Alfredo's direction

Explanation:

To know the the correct answer to the question given above, we shall determine the net force acting on the bat. This can be obtained as follow:

Force of pull by Mason (Fₘ) = 15 N

Force of pull by Alfredo (Fₐ) = 20 N

Net force (Fₙ) =?

Fₙ = 20 – 15

Fₙ = 5 N in Alfredo's direction

From the calculation made above, we can see that the net force is 5N in Alfredo's direction. This is the reason why Alfredo end up having the bat.

Answer:

Explanation:

C 200÷100=2

Output ÷ Input= MA

Answer: 109.4 mm

Explanation: Distance is a scalar quantity and it is the measure of how much path there are between two locations. It can be calculated as the product of velocity and time:  d = vt

The separation between the two steamrollers is 105 mm or 0.105 m. They collide to each other at the middle of the separation:

location of collision = [tex]\frac{0.105}{2}[/tex] = 0.0525 m

To reach that point, both steamrollers will have spent

[tex]v=\frac{\Delta x}{t}[/tex]

[tex]t=\frac{\Delta x}{v}[/tex]

[tex]t=\frac{0.0525}{1.2}[/tex]

t = 0.04375 s

The fly is travelling with speed of 2.5 m/s. So, at t = 0.04375 s:

d = 2.5*0.04375

d = 0.109375 m

Until it is crushed, the fly will have traveled 109.4 mm.

Answer:

There are four types of friction: static, sliding, rolling, and fluid friction. Static, sliding, and rolling friction occur between solid surfaces. Static friction is strongest, followed by sliding friction, and then rolling friction, which is weakest. Fluid friction occurs in fluids, which are liquids or gases.

Explanation:

When a ball of mass m makes a head-on elastic collision with a second ball (at rest) and rebounds in the opposite direction with a speed equal to one-fourth its original speed, then mass of the second ball having v/3 is velocity after collision is 9m/4.

Momentum is defined as mass times velocity of body. it is denoted by p and its SI unit is Kg.m/s. It has both magnitude and direction. it is a vector quantity.  it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.

initial momentum = final momentum

Given,

mass of first body m₁ = m

initial velocity of first body = v₁' = v

final velocity of first body = v₁'' =v/4

mass of second body m₂ = ?

initial velocity of second body = v₂' = 0

final velocity of second body = v₂'' = v/3

According to conservation of momentum,

initial momentum = final momentum

m₁v₁' + m₂v₂' = m₁v₁'' + m₂v₂''

putting al above values

m₁v + 0 = m₁v/4 + m₂v/3

m₁v - m₁v/4 = m₂v/3

m (1 - 1/4)v = m₂v/3

3m/4 = m₂/3

m₂ = 9m/4

Hence mass of the second body is 9m/4.

To know more about momentum, click :

https://brainly.com/question/30677308

#SPJ3

Answer:

1 m/s

Explanation:

5m/s change in velocity, divided by 5 seconds= 1 meter/second/second

change in velocity/change in time

Acceleration = (change in velocity) / (time for the change)

that's = (change in speed and its direction) / (time for the change)

Change in velocity = (ending velocity) - (starting velocity)

Change in velocity = (20 m/s west) - (15 m/s west)

Change in velocity = 5 m/s west

Acceleration = (5 m/s west) / (5 seconds)

Acceleration = 1 m/s west

Answer:

30J

Explanation:

Given parameters:

Mass of hamster  = 0.104kg

Velocity  = 24m/s

Unknown:

Kinetic energy  = ?

Solution:

Kinetic energy is the energy due to the motion of a body. It is mathematically derived by;

  Kinetic energy  = [tex]\frac{1}{2}[/tex] m v²  

m is the mass

v is the velocity

  Kinetic energy  = [tex]\frac{1}{2}[/tex] x 0.104 x 24²   = 30J

Answer:

How can I help you??? Plz insert some questions

Answer:

63.8 kJ

Explanation:

The net work output per cycle is the difference in heat input and heat output. The heat input and heat output are expressed as a function of volume ratios, while volume is expressed as a function of pressure and pressure as a function of temperature.

R = 287 J/kg.K, k = 1.4

Hence the net work input (W) is given as:

[tex]W=Q_{in}-Q_{out}\\\\W=mR[T_Hln\frac{V_2}{V_1} -T_Lln\frac{V_3}{V_4}]\\\\=mR[T_Hln\frac{P_1}{P_2} -T_Lln\frac{P_4}{P_3}]\\\\=mR[T_Hln(\frac{P_1}{P_3}(\frac{T_L}{T_H} )^\frac{k}{k-1}) -T_Lln(\frac{P_1}{P_3}(\frac{T_L}{T_H} )^\frac{k}{k-1})]\\\\=mR(T_H-T_L)ln(\frac{P_1}{P_3}(\frac{T_L}{T_H} )^\frac{k}{k-1})\\\\Substituting\ values:\\\\W=mR(T_H-T_L)ln(\frac{P_1}{P_3}(\frac{T_L}{T_H} )^\frac{k}{k-1})=0.6*287(1100-300)ln(\frac{3000*10^3}{2-*10^3}(\frac{300}{1100} )^\frac{1.4}{1.4-1})\\\\[/tex]

[tex]W=63.8\ kJ[/tex]

To Find :

Which is larger: 65 mph (miles per hour) or 120 kph (kilometers per hour).

Solution :

We know, 1 mph = 1.61 kph

So, 65 mph = 1.61 × 65 kph

65 mph = 104.65 kph

Since, 65 mph is 104.65 kph which is smaller than 120 kph.

Therefore, 120 kph is faster than 65 mph by ( 120 - 104.65 ) = 15.35 kph.

Answer:

Here its right but its also better than Barney's response

Explanation:

W, Y, Z, X or C

Answer:

W, Y, Z, X

Explanation:

Answer:

kinetic energy

kinetic energy

Answer:

Explanation:

75 N and 90 N are acting in opposite direction so net force = 90 - 75 = 15 N .

Friction force will act in the direction opposite to the direction of net force .

So friction force will act in the direction in which 75 N is acting .

Total force acting in the direction of 75 =  75 + 12 = 87 N

Net force acing on the third child = 90 - 87 = 3 N  

Its direction will be that in the direction of 90 N .

Answer: C. A few alpha particles bounced off a thin sheet of gold foil.

Answer:

40 kg m/s

Explanation:

Given the following data;

Mass of boy = 40kg

Mass of ball = 2kg

Velocity = 20m/s

To find the momentum;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum =mass * velocity

Substituting into the equation, we have

Momentum = 2 * 20

Momentum = 40 kg m/s

Answer:

A. Retina

Explanation:

Answer:

0.0003

Explanation:

In the rules of Sig Figs, all zeros before with decimals are not sigificant. I.E. 0.00000000000000009. Despite how many 0's there are, only the 9 is significant. Zeros before a number is not significant. In 100, only the one is signficant in 100. with a dot at the end, the one and the two zeros are significant. hope this helps.

Answers:

the second option

Explanation:

Answer:

Potential energy: Greatest at the top of the hill

Kinetic energy: Greatest at the bottom of the hill

The two meet at some point on the way down!

Explanation:

Potential energy is energy that represents an object's potential for motion. Kinetic energy is that object's energy during motion. They're two sides of the same coin, and in fact, their sum gets a special name: mechanical energy. Potential energy builds up in reaction to working against certain forces - in the case of the roller coaster, that primary force is gravity. Gravity exerts a downward force on the roller coaster, and it takes work to pull it up the hill.

When it reaches the peak, the coasters potential energy is at its highest, and the moment it crests over the hill and begins its descent, that gravitational potential energy starts converting into kinetic energy: the coaster starts accelarating down the track, and the potential energy decreases at the same rate that the kinetic energy increases.

At the bottom of the hill, all of that potential energy has become kinetic energy, and the coaster zooms along the track, hopefully not giving too many riders nausea

Answer:

Explanation:

Magnetic field due to current at a distance of 4.4 cm

B = 10⁻⁷ x 2 x 5.2 / 4.4 x 10⁻²           [ B = 10⁻⁷ x 2i / r = ]

= 2.36 x 10⁻⁵ T.

Force on moving electron = Bqv , B is magnetic field , q is charge and v is velocity of charge .

Force = 2.36 x 10⁻⁵  x 1.6 x 10⁻¹⁹ x 6.2 x 10⁴

= 23.41 x 10⁻²⁰ N .

This force will be perpendicular to the direction of current .

Answer:

The answer is below

Explanation:

We are going to use Gauss’ law to find the electric field equation. Since electric field is coming from an infinite line of charge, hence it is going out in a radial direction.  

Therefore we use the area of the electric field which passes through, forming a Gaussian cylinder. We neglect the ends of the area.

Hence:

[tex]\int\limits {E} \, dA=\frac{Q_{enc}}{\epsilon_o}\\\\E(2\pi rL)= \frac{\lambda L}{\epsilon_o}\\\\E=\frac{\lambda}{2\pi r\epsilon_o} \\\\Given \ that:\\\\r=a=8.7\ cm=0.087\ m, \lambda=-2.3 \mu C/cm=-2.3*10^{-4}\ C/m,\epsilon_o=8.85*10^{-12}F/m.\\\\Hence:\\\\E=\frac{-2.3*10^{-4}}{2\pi *0.087*8.85*10^{-12}}=-4.75*10^7\ N/C[/tex]

The value of the x-component of the electric field is -475213.968 newtons per coulomb.

In this question we shall apply Gauss' Law to determine the magnitude of the electric field ([tex]E_{x}[/tex]), in newtons per coulomb, rapidly and based on the assumptions of uniform charge distribution and cylindrical symmetry.

[tex]\frac{Q_{enc}}{\epsilon_{o}} = \oint\,\vec E\,\bullet d\vec A[/tex] (1)

Where:

Based on all assumptions, we simplify (1) as follows:

[tex]\frac{\lambda\cdot l}{\epsilon_{o}} = E \cdot (2\pi\cdot r\cdot l)[/tex]

And the equation of the x-component of the electric field is:

[tex]E = \frac{\lambda}{2\pi\cdot \epsilon_{o}\cdot r}[/tex] (2)

Where [tex]\lambda[/tex] is the linear charge density, in coulomb per meter.

If we know that [tex]\lambda = -2.3\times 10^{-6}\,\frac{C}{m}[/tex] and [tex]a = 0.087\,m[/tex], then the electric field produced by the line of charge at point P is:

[tex]E = \frac{\left(-2.3\times 10^{-6}\,\frac{C}{m} \right)}{2\pi\cdot \left(8.854\times 10^{-12}\,\frac{s^{4}\cdot A^{2}}{kg\cdot m^{3}} \right)\cdot (0.087\,m)}[/tex]

[tex]E_{x} = -475213.968 \,\frac{N}{C}[/tex]

The value of the x-component of the electric field is -475213.968 newtons per coulomb. [tex]\blacksquare[/tex]

The figure is missing, we present the corresponding image in the file attached below.

To learn more on electric fields, we kindly invite to check this verified question: https://brainly.com/question/12757739

Answer:

Einstein's equivalence principle says that __________.

the effects of gravity are exactly equivalent to the effects of acceleration

Explanation:

The equivalence principle is one of the fundamental laws of physics, as enunciated by Einstein.  It categorically states that the gravitational and inertial forces are of a similar nature.  In physics, a gravitational acceleration is the acceleration of an object in a free fall within a space.  The importance of Einstein's Equivalence Principle is explained by his theory of general relativity.  This theory states that mass is the same, whether inertial or gravitational.

According to the Einstein's equivalence principle, the effects of gravity are exactly equivalent to the effects of acceleration.

Einstein's equivalence principle says that  the effects of gravity are exactly equivalent to the effects of acceleration.

Einstein's equivalence principle states that the the force due to gravity and the force of inertia are similar in the nature and there is no need to distinct them.

Thus Einstein's equivalence principle says that  the effects of gravity are exactly equivalent to the effects of acceleration.

Learn more about the Einstein's equivalence principle here

https://brainly.com/question/20533998

All the objects are motionless, so kinetic energy of each object is zero after the collision.

The kinetic energy of an object is defined as the energy which is  possesses due to its motion. It is the work required to accelerate a body of a given mass from rest to its stated velocity. This energy is gained during its acceleration, the body maintains the kinetic energy as long as its momentum does not change.

Kinetic Energy can be expressed as

[tex]K.E.=[/tex] [tex]1/2 mv^2[/tex]

Where, m is the mass of the object

v is the velocity.

It is expressed in joules (J).

After the collision all the objects are at rest, therefore, the final kinetic energy is also zero which shows maximum loss of kinetic energy. Such collisions are called perfectly inelastic.

Thus, all the objects are motionless, so kinetic energy of each object is zero after the collision.

Learn more about Kinetic Energy, here:

https://brainly.com/question/26472013

#SPJ2

Assuming the particle is in free fall once it is shot up, its vertical velocity v at time t is

v = 30 m/s - g t

where g = 9.8 m/s² is the magnitude of the acceleration due to gravity, and its height y is given by

y = (30 m/s) t - 1/2 g t ²

(a) At its maximum height, the particle has 0 velocity, which occurs for

0 = 30 m/s - g t

t = (30 m/s) / g ≈ 3.06 s

at which point the particle's maximum height would be

y = (30 m/s) (3.06 s) - 1/2 g (3.06 s)² ≈ 45.9184 m ≈ 46 m

(b) It takes twice the time found in part (a) to return to 0 height, t ≈ 6.1 s.

(c) The particle falls 35 m below its starting point when

-35 m = (30 m/s) t - 1/2 g t ²

Solve for t to get a time of about t ≈ 7.1 s

Answer and Explanation: No, the explanation is not plausible. The puck sliding on the ice is an example of the Principle of Conservation of Energy, which can be enunciated as "total energy of a system is constant. It can be changed or transferred but the total is always the same".

When a player hit the pluck, it starts to move, gaining kinetic energy (K). As it goes up a ramp, kinetic energy decreases and potential energy (P) increases until it reaches its maximum. When potential energy is maximum, kinetic energy is zero and vice-versa.

So, at the beginning of the movement the puck only has kinetic energy. At the end, it gains potential energy until its maximum.

The representation is as followed:

[tex]K_{i}+P_{i}=K_{f}+P_{f}[/tex]

[tex]K_{i}+0=0+P_{f}[/tex]

[tex]\frac{1}{2}mv^{2} = mgh[/tex]

As we noticed, mass of the object can be cancelled from the equation, making height be:

[tex]h=\frac{v^{2}}{2g}[/tex]

So, the height the puck reaches depends on velocity and acceleration due to gravity, not mass of the puck.

Answer:

0.3106 seconds

Explanation:

Frequency= 20,000-Hz

The speed of echoes sounds can be calculated using the expression below;

Y= ( 2x/t) ...........................eqn(1)

t= overall time taken

x = maximum depth = 230m

Y= speed of echoes sounds

Speed of sound in water= 1,481 m/s which is a constant with little variation.

If we substitute the given values into eqn(1) we have

1481 = (2× 230)/ t

1481 × t= 460

t=460/1481

t=0.3106 seconds

Hence, the minimum time between pulses (in fresh water) is 0.3106 seconds

Answer:

2.59m/s

Explanation:

Using the equation of motion

v = u+at

v is the final velocity = 35ms

u is the initially velocity = 9m/s

t is the time = 13.5s

a is the acceleration

Substitute into the formula

35 = 0+13.5a

a = 35/13.5

a = 2.59m/s²

Hence the acceleration of the motorcycle is 2.59m/s

Answer:

My biggest reason is to make it a habit. Even if the ball goes into the endzone it is a live ball and the offensive players must down the ball. Don't leave any room for "I thought he downed it" or "I thought I heard the whistle" just run to the ball always.

If the players slow down and the returner takes it out of the end zone it could be a big return. Players are on a full sprint for 40+ yards sometimes and instead of breaking down, they choose to contine through the goal line to slow down at a decreased rate (possibly limiting a muscle pull injury).