6. What type of stretching would require you to hold a position for a period of time, like doing a split for two minutes and breathing into the pose? h short-term stretching dynamic stretching static-active stretching ballistic stretching​

Answer:

Acceleration is 2.78 m/s²

Explanation:

Since the car is from rest, initial velocity, u is zero.

from first newton's equation of motion:

[tex]{ \bf{v = u + at}} \\ [/tex]

v is final velocity

u is initial velocity

a is acceleration

t is time

70 km/h is (70 × 1000 ÷ 3600) m/s = 19.44 m/s

[tex]{ \sf{19.44 = 0 + (a \times 7)}} \\ { \sf{7a = 19.44 }} \\ { \sf{a = 2.78 \: {ms}^{ - 2} }}[/tex]

An order of magnitude is a number of the form 10^n such that can be used to compare magnitudes or quantities.

We will find that  the order of magnitude of golf balls that fill a home swimming pool is 10^6

In this case, we want to estimate the number of golf balls that would fill a home swimming pool.

We know that the diameter of a golf ball is D = 42.6mm = 0.0426m

And the volume of a sphere of diameter D is:

V = (4/3)*pi*(D/2)^3

where pi = 3.14

Then the volume of a single golf ball is:

V =  (4/3)*3.14*( 0.0426m/2)^3 = 0.00004 m^3

Now we need to find the average volume of a home swimming pool, we can use 48 m^3 (an average one) to do the general math.

To find the number of golf balls that enter in that volume, we need to do the quotient between the volume of the pool and the volume of a single ball:

N = (48 m^3)/(0.00004 m^3)  = 1,200,000

If we round this to the next order of magnitude: 10^6 (the exponent is the number of digits at the right of the one)

Then the order of magnitude of golf balls that enter in a home swimming pool is  10^6

If you want to learn more, you can read:

https://brainly.com/question/4953281

Answer:

Q:

What characteristic is shared by sunspots, solar flares, and coronal mass ejections? Select the two correct responses.

A:

They tend to occur during active periods of the solar cycle. & They are caused by outward fluctuations of the sun's magnetic field.

Q:Drag each item to the correct location.

A: sunspot: cooler area on suns surface where the magnettic field emerges

solar flare: intense burst of radiation coming from the rapid release of magnetic energy

coronal mass ejection: large bubble of plasma from the rapid release of magnetic energy

Q: Which is the cause of the sun's magnetic properties?

A: uneven churning of plasma

Explanation:

took quick check

good luck yall

The uneven churning of plasma is the cause of the sun's magnetic properties, therefore the correct answer is option B.

A magnetic field could be understood as an area around a magnet, magnetic material, or an electric charge in which magnetic force is exerted.

For a simple bar magnet, N-pole and S-pole are the points on a magnet that have the strongest magnetic field. The magnetic field originates from the north pole and terminates in the south pole of a magnet.

The positively charged ions and negatively charged electrons that make up the plasma of the Sun move around a lot due to its high temperatures. Multiple intricate magnetic fields that twist and turn are produced by the moving plasma. A magnetic field is produced by the extremely hot plasma that escapes from the Sun as the solar wind.

Thus, The sun's magnetic properties are caused by uneven plasma churning, so option B is the correct answer.

Learn more about the magnetic fields from here

brainly.com/question/23096032

#SPJ2

[tex]\\ \rm\longmapsto Force=Mass(Acceleration)[/tex]

[tex]\\ \rm\longmapsto Force=25(10)[/tex]

[tex]\\ \rm\longmapsto Force=250N[/tex]

The area which touches the sand floor of 4 feet of the bull is less than the man.

because the area of surface of contact is more in bull than in man. More is the area of contact, leads is the force or pressure affected.

Answer:

all of these very easy questions

Answer:

The direction of defliection of the site to the left I think ..

Answer:

The net force is the combined effect (the sum) of the real forces acting on the object. ... When there is a net force on an object, it causes the object to accelerate in the direction of the net force; this is not the same as the direction of the motion unless the object is going in a straight line.

Answer:

S=2,P=6,D=10,F=14. The total number of electrons contained by s,p,d,f subshells is 32

Answer:

P=160000Pa

Explanation:

You haven't specified what to calculate

But looking at the parameters I think the question is asking to calculate the pressure exerted.

Pressure=Force/Area

P=40000/0.25m²

P=160000Pa

Answer:



Register to download premium content!

X

Deutsch

Polski

Register

Log In

AC Circuits

Amplifiers

Attenuators

Binary Numbers

Boolean Algebra

Capacitors

Combinational Logic

Connectivity

Counters

DC Circuits

Diodes

Electromagnetism

Filters

Inductors

Input/Output Devices

Logic Gates

Miscellaneous Circuits

Operational Amplifiers

Oscillator

Power Electronics

Power Supplies

Premium

RC Networks

Resistors

Resources

Sequential Logic

Systems

Transformers

Transistors

Waveform Generators

Premium Content

Further Education

Sitemap

Contact Us

Home / AC Circuits / Power in AC Circuits



Power in AC Circuits

Electrical power consumed by a resistance in an AC circuit is different to the power consumed by a reactance as reactances do not dissipate energy

  

In a DC circuit, the power consumed is simply the product of the DC voltage times the DC current, given in watts. However, for AC circuits with reactive components we have to calculate the consumed power differently.

Electrical power is the “rate” at which energy is being consumed in a circuit and as such all electrical and electronic components and devices have a limit to the amount of electrical power that they can safely handle. For example, a 1/4 watt resistor or a 20 watt amplifier.

Electrical power can be time-varying either as a DC quantity or as an AC quantity. The amount of power in a circuit at any instant of time is called the instantaneous power and is given by the well-known relationship of power equals volts times amps (P = V*I). So one watt (which is the rate of expending energy at one joule per second) will be equal to the volt-ampere product of one volt times one ampere.

Then the power absorbed or supplied by a circuit element is the product of the voltage, V across the element, and the current, I flowing through it. So if we had a DC circuit with a resistance of “R” ohms, the power dissipated by the resistor in watts is given by any of the following generalised formulas:

The total mass of your catch is 13.1 kg

Since you have three fishes a bass, a rock cod, and a salmon with masses of 1.07 kg, 6.0 kg, and  6.05 kg, respectively,

The total mass of your catch = mass of bass + mass of rock cod + mass of salmon

= 1.07 kg + 6.0 kg + 6.05 kg

= 13.12 kg

Since the total mass of your catch is 13.12 kg and we have three catches with two catches to two decimal places and one catch to one decimal place.

We cannot have more decimal places in our answer than the number of decimal places in the number with the least number of decimal places.

Since the least number of decimal places is in the mass of the rock cod which is 6.0 kg, the total mass of our catch is thus 13.1 kg to one decimal place.

So, the total mass of your catch is 13.1 kg

Learn more about significant figures here:

https://brainly.com/question/17343107

Answer:

kinetic

Explanation:

kinetic energy is powered by motion or gravity the steeper the hill is the faster a ball will roll

Answer:

40

Explanation:

because his increasing speed

Answer:

what is it for

Explanation:

Answer:

IV family history of breast cancer or not.

DV chance of developing breast cancer. Hypothesis Someone with a family history of breast cancer will have a higher chance of developing it.

IV: Where the grass is placed: tree shade or direct sunlight.

Dv:The grasses growth rate

Hypothesis: Grass will grow faster in direct sunlight as opposed to tree shade

IV: Fresh veggies and fruit or not

Dv: how much the students eat: will they eat more or less?

Hypothesis The students will eat more in the lunchroom when Fresh veggies and fruits are served.

IV: The dog exercise everyday for 1 hour or not.

DV: The dogs barking: less or more.

Hypothesis: The dog will bark less when someone rings the doorbell if he exercises for 1 hour every day.

Explanation:

Observation When I wish my face before bed, I get less breakouts in the morning.

Question Does nightly face washing prevent morning breakouts?

IV Washing face at night or not

Dv How much breakouts in the morning.

Hypothesis Washing your face nightly decreases the occurrence of morning breakouts.

Answer:

Climbing stairs and lifting objects is work in both the scientific and everyday sense—it is work done against the gravitational force. When there is work, there is a transformation of energy. The work done against the gravitational force goes into an important form of stored energy that we will explore in this section.



Figure 1. (a) The work done to lift the weight is stored in the mass-Earth system as gravitational potential energy. (b) As the weight moves downward, this gravitational potential energy is transferred to the cuckoo clock.

Let us calculate the work done in lifting an object of mass m through a height h, such as in Figure 1. If the object is lifted straight up at constant speed, then the force needed to lift it is equal to its weight mg. The work done on the mass is then W = Fd = mgh. We define this to be the gravitational potential energy (PEg) put into (or gained by) the object-Earth system. This energy is associated with the state of separation between two objects that attract each other by the gravitational force. For convenience, we refer to this as the PEg gained by the object, recognizing that this is energy stored in the gravitational field of Earth. Why do we use the word “system”? Potential energy is a property of a system rather than of a single object—due to its physical position. An object’s gravitational potential is due to its position relative to the surroundings within the Earth-object system. The force applied to the object is an external force, from outside the system. When it does positive work it increases the gravitational potential energy of the system. Because gravitational potential energy depends on relative position, we need a reference level at which to set the potential energy equal to 0. We usually choose this point to be Earth’s surface, but this point is arbitrary; what is important is the difference in gravitational potential energy, because this difference is what relates to the work done. The difference in gravitational potential energy of an object (in the Earth-object system) between two rungs of a ladder will be the same for the first two rungs as for the last two rungs.

Converting Between Potential Energy and Kinetic Energy

Gravitational potential energy may be converted to other forms of energy, such as kinetic energy. If we release the mass, gravitational force will do an amount of work equal to mgh on it, thereby increasing its kinetic energy by that same amount (by the work-energy theorem). We will find it more useful to consider just the conversion of PEg to KE without explicitly considering the intermediate step of work. (See Example 2.) This shortcut makes it is easier to solve problems using energy (if possible) rather than explicitly using forces.

More precisely, we define the change in gravitational potential energy ΔPEg to be ΔPEg = mgh, where, for simplicity, we denote the change in height by h rather than the usual Δh. Note that h is positive when the final height is greater than the initial height, and vice versa. For example, if a 0.500-kg mass hung from a cuckoo clock is raised 1.00 m, then its change in gravitational potential energy is

mgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 Jmgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 J

Note that the units of gravitational potential energy turn out to be joules, the same as for work and other forms of energy. As the clock runs, the mass is lowered. We can think of the mass as gradually giving up its 4.90 J of gravitational potential energy, without directly considering the force of gravity that does the

Explanation:

extension(x) = 0.02m When the P.E is 10J.

extension(x)= 0.04m PE?.

P.E is proportional to Extension²

P.E/x² = P.E"/x"²

10/(0.02)² = P.E/(0.04)²

P.E= 10x(0.04)²/(0.02)²

P.E= 40J

Answer:

My believe the answer is

A.) or B.)

Explanation:

Here is why I think A is the answer.

If we use the process of elimination, it would look like this,

a) Porque el aire tiene una temperatura menor que la de su cuerpo; por eso se propaga más rápido.

This makes sense because we all know in winter the weather is very cold and freezing.

b) Porque la temperatura de su cuerpo, siente el aire frio que entra por la ventana.

I feel like this answer is the question, but it could also be an answer, sorry, I'm a little uncertain.

c) Porque el calor de su cuerpo se propaga al medio ambiente, al ser la temperatura del niño mayor que la del aire exterior.

This answer has nothing to do with the question, plus it is very false, our body heat is not enough to overcome the very cold temperature from outside.

d) Porque la temperatura del aire es igual a la temperatura del cuerpo.

This is false because again our body heat is not even compared to the freezing cold temperatures from the winter.

Answer:

Vision Correction

You probably know people who need eyeglasses or contact lenses to see clearly. Maybe you need them yourself. Lenses are used to correct vision problems. Two of the most common vision problems are myopia and hyperopia.

Explanation:

hope this helps

Answer:

sure

Explanation:

what/where is the work

Answer:

B

Explanation:

In this process on merry go round there is not any external torque so angular momentum will be conserve. Mass is always conserved.

Answer:

The Moon revolves around the Earth and rotates on its axis with the same period. • The combined effect of these two motions means that one side of the Moon always faces the Earth.

Answer:12.5 km

Explanation:

0.5=1/2

25 x 1/2 = 12.5 (25 ÷ 2 = 12.5)

Answer:

12.5 km

Explanation:

Distance = Speed x Time

               = 25 x 0.5

               = 12.5 km

Answer:

F = M a    Newton's second law

F = - K x     force exerted by compressed spring

a = - K x / M

a) is true because the ball originally is accelerated due to gravity and this acceleration will decrease as the spring in compressed

One could argue for (d) if the downward direction was designated as negative

Prior to maximum compression of the spring the velocity would negative and as the spring began to extend (and the ball began move upward) the velocity of the ball would change from negative to positive

Mass is not required

[tex]\\ \rm\longmapsto W=Fscos\Theta[/tex]

[tex]\\ \rm\longmapsto W=20(5)cos30[/tex]

[tex]\\ \rm\longmapsto W=100\times \dfrac{\sqrt{3}}{2}[/tex]

[tex]\\ \rm\longmapsto W=50\sqrt{3}J[/tex]

Answer:

[tex]we \: have \\ w = fs \cos( \alpha ) \\ f = 20n \\ m = 2kg \\ s = 5m \\ \alpha = 30 \\ \\ then \: w = 20 \times 5 \times \cos(30) \\ 100 \cos(30) \\ = 100 \frac{ \sqrt{3} }{2} \\ = 50 \sqrt{3} \\ = 86.6 \: joule\\ thank \: yo[/tex]

Answer:

½mv²=mgh

g=½(V²/h)

Explanation:

When an object is held at a height, it posses gravitational potential energy which is mgh, where m= mass, h=height, g=acceleration due gravity

When the object is dropped, the potential energy will be converted to kinetic energy which is ½mv², where V=velocity at which the object moves.

V=∆h/t, ∆h is change in height with respect to time.

½mv²=mgh

Mass cancel out,

g=v²/2h

This implies that g does not depend or is not affected by mass. Hence heavy object and light object will reach the ground at the same time when dropped from the same height. When air resistance is negligible.

Answer:

300

Explanation:

when the baby are born then they would have 300 bones but when they grow they would have 206 cause when they grow that 94 bones would convert into different kind of proton and energy I guess

Answer:

Air pressure or atmospheric pressure is the pressure as the force exerted by the collisions of particles in the air. The key difference between air pressure and liquid pressure is that air pressure allows the gaseous state of matter to be compressible, whereas liquid pressure makes a liquid incompressible

Explanation:

Air pressure or atmospheric pressure is the pressure as the force exerted by the collisions of particles in the air. The key difference between air pressure and liquid pressure is that air pressure allows the gaseous state of matter to be compressible, whereas liquid pressure makes a liquid incompressible