6. Create a java application that will predict the size of a population of organisms. The user should be able to provide the starting number of organisms, their average daily population increase (as a percentage), and the number of days they will multiply. For example, a population might begin with two organisms, have an average daily increase of 50 percent, and will be allowed to multiply for seven days. The program should use a loop to display the size of the population for each day.

Input validation: Do not accept a number less than 2 for the starting size of the population. Do not accept a negative number for average daily population increase. Do not accept a number less than 1 for the number of days they will multiply.

Answers

Answer 1

Answer:

Explanation:

Here's a Java application that predicts the size of a population of organisms based on user inputs:

-------------------------------------------------------------------------------------------------------------

import java.util.Scanner;

public class PopulationPredictor {

   public static void main(String[] args) {

       Scanner scanner = new Scanner(System.in);

       // Get user inputs

       int startingSize;

       do {

           System.out.print("Enter the starting size of the population (must be at least 2): ");

           startingSize = scanner.nextInt();

       } while (startingSize < 2);

       double dailyIncrease;

       do {

           System.out.print("Enter the average daily population increase as a percentage (must be non-negative): ");

           dailyIncrease = scanner.nextDouble();

       } while (dailyIncrease < 0);

       int numDays;

       do {

           System.out.print("Enter the number of days the population will multiply (must be at least 1): ");

           numDays = scanner.nextInt();

       } while (numDays < 1);

       // Calculate and display population size for each day

       double populationSize = startingSize;

       System.out.println("\nDay 1: " + populationSize);

       for (int day = 2; day <= numDays; day++) {

           populationSize += (populationSize * dailyIncrease) / 100;

           System.out.println("Day " + day + ": " + populationSize);

       }

   }

}

-------------------------------------------------------------------------------------------------------------

The program first prompts the user to input the starting size of the population, the average daily population increase (as a percentage), and the number of days the population will multiply. It then uses a series of do-while loops to validate the user inputs according to the requirements stated in the prompt.

Once the user inputs are validated, the program calculates the size of the population for each day using a for loop. The population size for each day is calculated by multiplying the previous day's population size by the daily increase percentage (converted to a decimal), and adding the result to the previous day's population size.

The program then displays the population size for each day using println statements.


Related Questions

FILL IN THE BLANK. In the Reno TCP when TCP enters the fast recovery if a new (non-duplicate) ACK arrives, TCP _____.

Answers

In the Reno TCP, when TCP enters the fast recovery if a new (non-duplicate) ACK arrives, TCP increments the congestion window by 1 segment instead of 1/2 segment.

The Reno TCP was the first modification of TCP that addressed congestion. It replaces the slow start and congestion avoidance algorithms with a more aggressive algorithm that speeds up the recovery process when packet loss is detected in the network. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost. The Reno TCP then changes to fast recovery mode when it detects the third duplicate acknowledgement.

The Reno TCP is an enhancement to the TCP congestion avoidance algorithm that improves its ability to handle congestion in the Internet. It is a variant of TCP that is designed to cope with network congestion by quickly responding to lost packets, rather than relying on the slow, steady approach of TCP's congestion avoidance algorithm. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost.

For such  more questions on TCP :

brainly.com/question/29848408

#SPJ11

Which of the below is float? Select 2 options.

2.5
25
3e-2
'2.5'
"25"

Answers

Answer:2.5 and '2.5'

Explanation:

A float number is a number that isn't whole, like for example a decimal number, so the only floats I saw were 2.5 and '2.5'

I hope you get a 100%

2.5 and ‘2.5’ because float is a number that has a number decimal ¡hope this help!

the following circuit connects the output of a comparator (u1a) to an led (d1). which of the following condition is correct? g

Answers

The following circuit connects the output of a comparator (U1A) to an LED (D1). The condition is correct.

To determine if the condition is correct, we must examine the circuit and the functionality of the components. U1A is a comparator, meaning it takes two inputs and compares them. If the input voltage of U1A is higher than the reference voltage, U1A's output will be high (1). D1 is an LED, meaning when it is activated it will produce light. In this circuit, D1 is connected to U1A's output. Therefore, if U1A's output is high, the LED will be activated, and if U1A's output is low, the LED will not be activated.

To determine if the condition is correct, we must consider the logic of the circuit. If U1A's input voltage is higher than the reference voltage, U1A's output will be high and the LED will be activated. Therefore, the given condition is correct.

For such more questions on circuit :

brainly.com/question/28655795

#SPJ11

T/F. After creating the first model view, SOLIDWORKS places you into Projected View mode where you can add projected views of the model view.

Answers

The given statement "After creating the first model view, SOLIDWORKS does not place you into Projected View mode where you can add projected views of the model view" is FALSE because The SOLIDWORKS software toolset provides users with a number of tools to create 2D drawings of their designs.

With SOLIDWORKS, it is easy to generate technical drawings that show various views of the design in the form of orthographic projection views. The first view of a part or assembly is typically called the base view, and it should represent the part or assembly in the default orientation. To generate the base view, you must select a plane, planar face, or named view for the initial orientation. If the model contains an isometric view, you can use this orientation as well.

In conclusion, after creating the first model view, SOLIDWORKS does not place you into Projected View mode where you can add projected views of the model view. Instead, the user must manually select the base view and then add additional views as needed using one of the available tools in SOLIDWORKS.

Know more about orthographic projection views here:

https://brainly.com/question/876529

#SPJ11

Which of the following statements about the guarding against overestimating variable consideration under U.S. GAAP and IFRS is true?
Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
Under U.S. GAAP, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
U.S. GAAP and IFRS convey the same likelihood with regards to the uncertainty associated with the variable consideration.

Answers

The statement  is true because regarding U.S. GAAP and IFRS when it comes to guarding against overestimating variable consideration is that "Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable".

IFRS requires that estimates of variable consideration be included only when the likelihood of significant reversal of revenue is “probable”, and this is a stricter standard than the “reasonably possible” standard under U.S. GAAP.

Under U.S. GAAP, estimates of variable consideration are only included when the amount of the estimate is both “reasonably possible” and “probable”. Therefore, U.S. GAAP and IFRS do not convey the same likelihood when it comes to the uncertainty associated with the variable consideration.

Under IFRS, the seller must be more certain that there will not be a significant reversal of revenue before including the estimate, while under U.S. GAAP, the seller only needs to be reasonably certain that there is a possibility of a significant reversal.

For more such questions on revenue

https://brainly.com/question/13440727

#SPJ11

TRUE/FALSE.Typically, hybrid drives use SSD to store the operating system and applications and hard disks to store videos, music, and documents.

Answers

The given statement "Typically, hybrid drives use SSD to store the operating system and applications and hard disks to store videos, music, and documents." is true because a hybrid drive is a combination of solid-state and hard-disk drives.

It aims to provide faster and more efficient performance in contrast to traditional hard-disk drives. An SSD is the key component of a hybrid drive since it improves the boot time of the operating system and speeds up the launch of applications by using the flash storage.

As a result, users experience much quicker system responsiveness and load times. Hard-disk drives, on the other hand, are used to store media files, such as music and videos, as well as personal documents and archives.

Thus, hybrid drives offer the best of both worlds by combining the speed of SSDs and the storage capacity of traditional hard-disk drives.

For such more question on hard-disk:

https://brainly.com/question/26382243

#SPJ11

Write a Python program that requests five integer values from the user. It then prints one of two things: if any of the values entered are duplicates, it prints "DUPLICATES"; otherwise, it prints "ALL UNIQUE".

Answers

Answer:
values = []

for i in range(5):

   value = int(input(f"Enter value {i+1}: "))

   values.append(value)

if len(set(values)) < len(values):

   print("DUPLICATES")

else:

   print("ALL UNIQUE")


Explanation:

The program creates an empty list called values, and then uses a for loop to request five integer values from the user using the input() function. The int() function is used to convert the input values to integers, and the append() method is used to add each value to the values list.

After all five values have been entered, the program uses the set() function to create a set of the values. A set is an unordered collection of unique elements, so if there are any duplicate values in the original values list, they will be removed when the set is created. The program then compares the length of the original values list to the length of the set. If the lengths are not equal, it means there were duplicates in the original list, and the program prints "DUPLICATES". Otherwise, the program prints "ALL UNIQUE".

TRUE/FALSE. The str method is a good example of a polymorphic method that appears throughout Python's system of classes.

Answers

Polymorphic method that appears throughout Python's system of classes is a true statement.

The str method is an example of such a method in Python.In Python, a method that can be used with multiple types of objects is known as a polymorphic method. Python's polymorphic nature allows it to perform many operations without needing to be explicitly declared for specific data types. Python supports polymorphism via a broad variety of concepts, such as functions, method overloading, and operator overloading.

Str method example:As mentioned earlier, the str method in Python is a good example of a polymorphic method that appears throughout Python's system of classes. The str method is used to convert an object into a string. The str method is known as an instance method since it is called on an instance of a class.Str method definition:This method returns a string representation of the object. If no argument is given, it returns a string representation of the empty object.

For such more questions on str method:

brainly.com/question/29602416

#SPJ11

write the extension for the following programs Ms.word, PowerPoint ,excel, image

Answers

Answer:

Microsoft word: docx or doc

PowerPoint: pptx

Excel: There's a few for Excel, but I believe the default is xlsx

Image: jpg, jpeg, png

C. What are the some of the bad habits of using computers?

Answers

Answer:

1. Poor Posture: Sitting in the same position for too long can lead to poor posture, which can cause muscle fatigue, back and neck pain, and headaches.

2. Carpal tunnel syndrome: Repetitive motions such as typing on a keyboard can cause carpal tunnel syndrome, a type of nerve damage that can cause pain and numbness in the hands and wrists.

3. Eyestrain: Prolonged use of a computer can cause eyestrain, which can lead to headaches and vision problems.

4. Poor diet: Sitting in front of a computer can lead to snacking, which can lead to a poor diet and health problems.

5. Lack of physical activity: Using a computer all day can lead to lack of physical activity, which can cause health problems such as obesity.

write the pseudocode to represent the logic of a simple input and output program

Answers

' INPUT user inputs their name STORE the user's input in the name variable OUTPUT 'Hello' + name OUTPUT 'How old are you? ' INPUT user inputs their age STORE the user's input in the age variable IF age >= 70 THEN OUTPUT 'You are aged to perfection! ' ELSE OUTPUT 'You are a spring chicken! '

14.
(05.03 MC)

Which example of the always secure design principle states that the resiliency of software and devices against attacker attempts depends heavily on the protection of its at risk components? (5 points)

Psychological acceptability

Complete mediation

Separation of privilege

Weakest link
15.
(05.03 LC)

Which principle states that the confidentiality of a system should remain even when availability is interrupted? (5 points)

Failsafe defaults

Complete mediation

Open design

Weakest link
16.
(05.03 LC)

Which principle states that if the design is highly complex, chances are good that security vulnerabilities increase? (5 points)

Open design

Weakest link

Economy of mechanism

Failsafe defaults
17.
(05.03 LC)

Which key soft skill involves evaluating evidence with an open mind? (5 points)

Critical thinking

Communication

Teamwork

Enthusiasm
18.
(05.03 LC)

Darren was assigned a big project planning a new network for his company. The network will connect several computers throughout a building. Which type of hard skill will he need in this situation? (5 points)

Virtual private network

Local area network

Wide area network

Private area network
19.
(05.03 LC)

What is one method attackers might use to smuggle hidden messages within an unsuspecting file? (5 points)

Copyright

Encoding

Network steganography

Digital encryption
20.
(06.01 MC)

Jackson just started working for a large technology company and received a list of rules that must be followed. He must sign an agreement that he will follow these rules before he can start his job. Which term best describes this agreement? (5 points)

Methods

Procedures

Regulations

Recommendations
21.
(06.01 LC)

________ is the government agency responsible for creating and monitoring safe workspaces in the United States. (5 points)

FDA

DOE

OSHA

USDA
22.
(06.02 LC)

Sarah has ambition and drive to create innovative products and set her own working hours. What type of career opportunity should Iris consider? (5 points)

Mentorship

Leadership

Practicum

Entrepreneurship
23.
(06.03 LC)

Peter has some job experience, but he took some time off to travel and visit friends. Which résumé format should he avoid using due to gaps in his employment history? (5 points)

Video

Combination

Chronological

Functional
24.
(06.03 LC)

Which résumé format would be a good fit for individuals with little to no work experience? (5 points)

Chronological

Video

Functional

Combination
25.
(06.03 LC)

Amy abbreviated the date as 10.27.21 in her business letter. After proofreading her letter, she realized the date format was incorrect. What is the correct format for the date? (5 points)

Answers

14.) Weakest link

15.) Failsafe default

16. ) Economy of mechanism

17.) Critical thinking

18.) Local area network

19.) Network steganography

20.) Regulations

21.) OSHA

22.) Entrepreneurship

23.) Chronological

24.) Functional

25.) October 27, 2021

TRUE/FALSE.The Transport layer uses port numbers to identify the source and destination Application-layer protocol of the data that it contains.

Answers

The given statement "The Transport layer uses port numbers to identify the source and destination Application-layer protocol of the data that it contains is true because in computer networking, port numbers are used to identify certain protocols or services that are part of an application.

It enables the operating system to manage incoming and outgoing connections through the network's internet Protocol (IP) address.

Port numbers are divided into three ranges: well-known ports, registered ports, and dynamic or private ports. These numbers are typically represented as a 16-bit unsigned integer within a TCP or UDP header. TCP and UDP are two common protocols that use port numbers.

For such more question on networking:

https://brainly.com/question/28464891

#SPJ11

Which of the following statements about changing requirements in software development, are correct?

Answers

The following statement about changing requirements in software development, is correct: Organizations must adapt to rapidly changing market conditions to stay relevant in business. (Option D)

What is software development?

Software development refers to the process of designing, creating, testing, and maintaining software applications, frameworks, or other software components used by computers or other devices.

The statement "Changes are acceptable till design but once development starts, any further change should be rejected" is incorrect as changes in software requirements can occur at any stage of the software development life cycle.

However, changes made later in the development cycle can be more expensive and time-consuming to implement, and they can introduce additional risks to the project.

The statement "In traditional way of software development, once the requirements are baseline, further changes can be easily accepted with light process" is also not entirely true. Any changes to baselined requirements should be subject to a formal change control process.

Learn more about software development on:

https://brainly.com/question/3188992

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:


Which of the following statements about changing requirements in software development, are correct?

In traditional way of software development, once the requirements are base lined, further changes should undergo heavy change control process

Changes are acceptable till design but once development starts, any further change should be rejected

In traditional way of software development, once the requirements are base lined, further changes can be easily accepted with light process.

Organizations must adapt to rapidly changing market conditions to stay relevant in business​

The management has five functions:a.) Planning ,b.) Organization,c.) Staffing,D.) Directing and e.) Controlling
Discuss each throughly

Answers

Answer:

Planning: Planning is the function of management that involves setting objectives and determining a course of action for achieving those objectives. It involves the creation of a plan, which outlines the steps necessary to reach a desired goal. Planning involves analyzing current and potential resources, predicting future needs, and setting priorities for achieving objectives.

Organization: Organization is the function of management that involves arranging people and other resources to work towards a common goal. It involves creating and structuring a hierarchy of authority within the company, assigning tasks and responsibilities, and establishing systems for communication and decision making.

Staffing: Staffing is the function of management that involves recruiting, selecting, training, and developing employees to fill the positions needed to complete the tasks required for achieving an organization’s goals. It involves assessing the skills and qualifications of potential employees, understanding the organization’s current and future needs, and creating a team of individuals with the right skills and experience.

Directing: Directing is the function of management that involves providing guidance and motivation to employees to ensure that tasks are completed on time and with the desired quality. It involves setting expectations, giving instructions and feedback, and providing support and encouragement.

Controlling: Controlling is the function of management that involves monitoring the performance of employees and the organization as a whole to ensure that goals and objectives are being met. It involves evaluating performance, identifying areas for improvement, and taking corrective action when needed.

Find the big-O cost for the following in the worst case:
Invoking the remove operation on an Iterator object attached at an arbitrary location to a java LinkedList of length N. Choose one
O(N)
O(logN)
O(1)
O(2^N)
O(N^2)

Answers

Big O notation is used to describe the upper bound of the time complexity of an algorithm. It can be used to provide a measure of the worst-case time complexity of the algorithm.

In this case, n is the size of the input data.The Big O cost for the following in the worst case:O(2^N)The time complexity of O(2^N) means that the time taken by the algorithm will increase exponentially with the size of the input data. This is because the algorithm is performing an operation that takes an amount of time that is proportional to 2 raised to the power of N. For example, if N is 5, the algorithm will take 2^5 = 32 time units. If N is 10, the algorithm will take 2^10 = 1024 time units.The Big O cost for the following in the worst case: O(N^2)The time complexity of O(N^2) means that the time taken by the algorithm will increase quadratically with the size of the input data. This is because the algorithm is performing an operation that takes an amount of time that is proportional to N raised to the power of 2. For example, if N is 5, the algorithm will take 5^2 = 25 time units. If N is 10, the algorithm will take 10^2 = 100 time units.In summary, the time complexity of O(2^N) is worse than that of O(N^2) as the time taken by the algorithm will increase much faster with the size of the input data.

for more such question on algorithm

https://brainly.com/question/13902805

#SPJ11

Cora is a network engineer for a large company and has been given instructions on how to configure a private fiber connection between her company's data center and the cloud service provider her company uses. She needs to configure an ASN on one of the core routers in the data center as part of the connection. Which of the following protocols is she most likely being instructed to configure for use with the CSP?

Answers

Answer: Cora is most likely being instructed to configure the Border Gateway Protocol (BGP) for use with the cloud service provider (CSP).

Explanation:

Cora is most likely being instructed to configure the Border Gateway Protocol (BGP) for use with the cloud service provider (CSP). BGP is a routing protocol that is commonly used in large networks, including those that connect data centers to cloud service providers. It allows for the exchange of routing information between different networks and helps to ensure that data is routed efficiently and reliably. BGP uses Autonomous System Numbers (ASNs) to identify different networks and to facilitate routing between them, which is why Cora needs to configure an ASN on one of the core routers in the data center.

What BEST describes the difference between copyrighted graphics and written
works?

Answers

Answer:

the main difference between copyrighted graphics and written works is that copyrighted graphics are protected by copyright law, while written works are protected by both copyright and intellectual property law. Copyright law grants exclusive rights to the author of the work (such as the right to reproduce or distribute the work) while intellectual property law protects the expression of ideas.

Beri is analyzing some network traffic statistics and sees a metric that appears to indicate that frames are being corrupted as they're being sent across the network. Which of the following might be the metric that causes her to believe that is the case?

Answers

Answer:

The metric that Beri might be looking at is the frame check sequence (FCS) error rate. The FCS error rate measures the number of frames that are received with errors due to corruption or other issues. A high FCS error rate indicates that frames are being corrupted as they are being sent across the network.

for what values of integer x will branch 3 execute? if x < 10 : branch 1 else if x > 9: branch 2 else: branch 3

Answers

For an integer x to execute branch 3, the value of x must be equal to 9. This can be seen by examining the given statement "if x < 10 : branch 1 else if x > 9: branch 2 else: branch 3".

The statement is an example of an if-else statement, which is a type of conditional statement used in programming. This statement is read as: "If the condition 'x < 10' is true, execute branch 1; otherwise, if the condition 'x > 9' is true, execute branch 2; if both of these conditions are false, execute branch 3." As the condition 'x > 9' is false if x is equal to 9, branch 3 will execute when x = 9.

To sum up, for an integer x to execute branch 3, the value of x must be equal to 9.

for more such question on integer

https://brainly.com/question/29692224

#SPJ11

fill in the blank. ___ are text-based systems. Users must key in commands to tell the computer what to do. The primary method of inputs is the keyboard. A mouse is not needed.

Answers

Computers are text-based systems. Users must key in commands to tell the computer what to do. The primary method of input is the keyboard; a mouse is not needed.

In order to interact with the computer, a user must input commands into the system in order to give the computer instructions. The commands are usually in the form of words, numbers, and symbols. After the user enters the command, the computer will process the command and respond accordingly. The user can then type in more commands and the computer will repeat the process until the user is finished. This method of input allows users to be very precise in their instructions, as each individual command is processed and executed by the computer.

For more such questions on Computers

https://brainly.com/question/28498043

#SPJ11

Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program.

JDoe

1. Line 1
print (answer)
2. Line 2
return strFirst[0] + strLast
3. Line 3
def username (strFirst, strLast):
4. Line 4
answer = username ('Joann', 'Doe')

Answers

Answer:

1. Line 3

def username (strFirst, strLast):

2. Line 2

return strFirst[0] + strLast

3. Line 1

answer = username ('Joann', 'Do')

4. Line 4

print (answer)

Output: JDo

42) Identify the correct algorithm to use for finding the insertion position of a new item in the linked list studentList.
a. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢head
while (curNodeB == null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeA
}
b. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢tail
while (curNodeB != null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeA
}
return curNodeA
}
c. ListFindInsertionPosition(studentList, dataValue) {
curNodeB = null
curNodeA = studentList⇢head
while (curNodeB == null and dataValue < curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeB
}
d. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢head
while (curNodeB != null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeA
}

Answers

The best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. A linear search algorithm is a simple search algorithm that looks for a value within a list by sequentially checking each element of the list until it finds the desired element or reaches the end of the list. In this case, the algorithm would start at the beginning of the studentList.curNodeA, and then check each node until it finds the desired insertion position.


Once the algorithm finds the desired insertion position, it would then insert the new item into the list, either at the beginning, middle, or end. To insert at the beginning, the algorithm would shift all the other elements down and make room for the new item. To insert at the middle, the algorithm would again shift all the other elements down, while making room for the new item. And to insert at the end, the algorithm would simply append the new item onto the end of the list.

To summarize, the best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. This algorithm can search for the desired insertion position and then insert the new item at the beginning, middle, or end of the list as needed.

for more such questions on algorithm .

https://brainly.com/question/24953880

#SPJ11

you have a windows workstation connected to a small network. match the utilities on the right with the functions they perform on the left.

Answers

System File Checker (SFC) – This utility can scan your system files and restore corrupted or missing system files.

Defrag – This utility is used to optimize and defragment your the hard drive, which can improve its performance. Disk Cleanup – This utility can be used to clean up the temporary files and all other unnecessary files, freeing up the disk space.

Registry Editor – This utility can be used to edit the Windows registry, which contains settings for Windows and all installed programs. Device Manager – This utility is used to the view and manage the hardware connected to your system, including the drivers.

For more such questions on System File Checker .

https://brainly.com/question/28111651

#SPJ11

Note- Complete questions isn't available on the search engine.

The structures used to store data

Answers

Answer:

you can store data in list , Tuple , map and array

Explanation:

list means in the form:

list = [1,2,3,4,5]

Tuple = (1,2,3,4,5)

map = {1:2, 2:3 , 3:4}

array = [

[1,2,3,4,5]

[6,7,8,9,10]

]

difference

list is used to access the stored data by usinf the index. Tuple consider each elements as a string

map used to store connected data's like age and name of some one and acces it using either of them and areay used to store 2 dimensional data

Differentiate between ICT and ICTs​

Answers

ICT refers to the field of information and communication technologies as a whole, while ICTs refer to the individual technologies within that field such as computers, smartphones, and the internet.

What is internet?
The internet is a global network of interconnected computers and servers that communicate with each other using standard communication protocols, allowing people to access and share information and communicate with each other across geographical distances.


ICT stands for Information and Communication Technology, which is a term used to describe the combination of technologies used to manage and communicate information.

ICTs, on the other hand, stands for Information and Communication Technologies, which refers to the specific devices, tools, and technologies used for communication and information management, such as computers, smartphones, the internet, and various software and applications.

In summary, ICT is a broader term that encompasses various technologies used for managing and communicating information, while ICTs are specific technologies that fall under the ICT umbrella.


To know more about software visit:
brainly.com/question/1022352
#SPJ1

Given the following values of arr and the mystery method, what will the values of arr be after you execute: mystery()? private int[] arr - (-17, -14, 3, 9, 21, 34); public void mystery() for (int i = 0; i < arr.length / 2; i += 2) arr[i] = arr[i]. 2;
A. {-34, -28, 6, 18, 42, 68}
B. {-17, -14, 3, 18, 21, 34}
C. {-34, -28, 6, 9, 21, 34)
D. {-34, -14, 6, 9, 21, 34}
E. {-34, -14, 6, 9, 42, 34}

Answers

The final value of arr will be {-8, -14, 1, 9, 10, 34}, which is closest to option B: {-17, -14, 3, 18, 21, 34}. Therefore, the answer is option B.

The mystery method is dividing the length of the array by 2 and iterating over the array by incrementing i by 2 in each iteration. In each iteration, it's updating the value at index i to be half of its current value.

Starting with the given values of arr: {-17, -14, 3, 9, 21, 34}

In the first iteration, i = 0, and arr[0] will be updated to -8.5, but since it's an integer array, it will be rounded down to -8.

After the first iteration: {-8, -14, 3, 9, 21, 34}

In the second iteration, i = 2, and arr[2] will be updated to 1.5, but since it's an integer array, it will be rounded down to 1.

After the second iteration: {-8, -14, 1, 9, 21, 34}

In the third iteration, i = 4, and arr[4] will be updated to 10.5, but since it's an integer array, it will be rounded down to 10.

After the third iteration: {-8, -14, 1, 9, 10, 34} Option B.

For more such questions on mystery

https://brainly.com/question/30331783

#SPJ11

1. Write a Java program that generates a random integer number between 1 and 100 and asks the user to guess what that number is. If the user’s guess is higher than the random number, the program should display “Too high, try again.” If the user’s guess is lower than the random number, the program should display “Too low, try again.” When the user guesses the number, the program should display the number of guesses that the user makes. (Use the Scanner class.)

Answers

Answer:

Explanation:

SEE THE ATTACHED.


12. Which function converts a text string to uppercase, or capitalization, for all the text in a string?

A. RIGHT
B. UPPER
C. LOWER
D. MID

Answers

The Answer: B. UPPER

The answer is B.UPPER

Which of the following is a fast and easy way to gather information about a company? (Choose all that apply.)
a. Conduct port scanning.
b. Perform a zone transfer of the company’s DNS server.
c. View the company’s Web site.
d. Look for company ads in phone directories.

Answers

The options that are a fast and easy way to gather information about a company are as follows View the company's website, Look for company ads in phone directories. Therefore the correct option is option C and D.

To acquire information about a company, conducting a zone transfer of the company’s DNS server and port scanning aren't the recommended techniques because they’re intrusive and can lead to security risks.

Both the website and the phone directory are easy to access, safe, and are often trustworthy sources of information. To gather the required information, one can quickly check out the company's website, where it is possible to find the required information that one needs, and also look for company ads in phone directories.

These two methods are fast and easy to access. One can also go through the company profile on various social media platforms for getting insights into the company's culture, employee reviews, and reviews from customers. Therefore the correct option is option C and D.

For such more question on directories:

https://brainly.com/question/29486744

#SPJ11

Other Questions
Introduction Read the overview below and complete the activities that follow Contracts are classified in a number of different ways. Different classifications are useful for different purposes. This interactive reviews the primary ways by which we class ify contracts. CONCEPT REVIEW: Review the section "Classification of Contracts" in your text to understand the differences among bilateral, unilateral, express, implied, formal, and informal contracts. The dlagram below Illustrates three different ways of categorizing contracts: (1) bilateral vs. unilateral; (2) express vs. Implied, and (3) formal vs. Informal. First, roll over each title and read the scenarios glven. Then drag and drop the title into the appropriate circle on the diagram. Medical Emergency Reward for Wallet $4,000- Chimney Handwritten Letter of Credit Written Terms Agreement Informal Express Unilateral Implied Bilateral Formal Contracts Contracts Contracts Contracts Contracts Contracts Many studies confirm that _________.-the whole-language approach places too much emphasis on basic skills-children do not benefit from reading strategies until they have fully mastered phonics-fluent readers tend to use ineffective reading strategies and have difficulty with comprehension-combining phonics with whole language is the best method for teaching beginning readingPage 313 in parliamentary systems, both the prime minister and the cabinet are ultimately accountable to parliament. in the u.s., the executive and legislative branches are separate and co-equal. what are the major advantages and disadvantages of each system? A muscle that is being regularly contracted during exercise will attract blood flow by dilating arterioles. Which of these factors would contribute to the effect?increased levels of carbon dioxideheat loss from the muscleincreased levels of oxygenan increase in sympathetic tone Your teacher prepares a large container full of coloredbeads. She claims that 1/8 of the beads are red, 1/4 areblue, and the remainder are yellow. Your class will take asimple random sample of beads from the container to test the teacher's claim. The smallest number of beads youcan take so that the conditions for performing inferenceare met is. 1516304090 if you have an ectopic pregnancy will a pregnancy test be positive Let A and B be events with P(A) = 0.3, P(B) = 0.6, and P(A and B) = 0.03. Are A and B mutually exclusive? Explain why or why not. what percentage of the area under the normal curve falls between 2 standard deviations? A 2 kg object is released from rest near the surface of a planet such that its gravitational field is considered to be constant. The mass of the planet is unknown. Theobject's speed after falling for 3 sis 75 m/s. Air resistance is considered to be negligible, Calculate the weight of the 2 kg object on the planet of unknown mass. 2NB25 N50ND75 N a Python program to process a set of integers, using functions, including a main function. The main function will be set up to take care of the following bulleted items inside a loop: The integers are entered by the user at the keyboard, one integer at a time Make a call to a function that checks if the current integer is positive or negative Make a call to another function that checks if the current integer to see if it's divisible by 2 or not The above steps are to be repeated, and once an integer equal to 0 is entered, then exit the loop and report each of the counts and sums, one per line, and each along with an appropriate message NOTE 1: Determining whether the number is positive or negative will be done within a function; and then a call to that function will be made from within the main function. The following is what you are to do within that function: if an integer is positive, add that integer to the Positive_sum increment the Positive_count by one If the integer is negative add that integer to the Negative_sum increment the Negative_count by one NOTE 2: Determining whether the number is divisible by 2 or not will be done within a second function; and then a call to that function will be made from within the main function. The following is what you are to do within that function: if the integer is divisible by 2 increment the Divby2_count by one if the integer is not divisible by 2 increment the Not_Divby2_count by on NOTE 3: It's your responsibility to decide how to set up the bold-faced items under NOTE 1 and NOTE 2. That is, you will decide to set them up as function arguments, or as global variables, etc. The magnitude of the force between two point charges 1. 0 mapart is 9 x 10n. If the distance between them is doubled,what does the force become? for the given input voltage amplitude (200 mvpp), what is the maximum gain that this amplifier will be able to produce? show your calculation below. Which of the following commands displays information about the account issuing the command? (Choose all that apply.)A. whoamiB. who am iC. cat $HOME/.bashrcD. cat $HOME/.profileE. id in a speech noting how we must remain hopeful during efforts to find missing children, Lars noted how investigators in Missouri, while searching for one child. Ben Ownby, who'd been missing for a week found him and another Shawn Hornbeck who had been missing for 4.5 years. Police discovered them in the same apartment - captives of the same perpetrator. In relating this instance, Lars provided _____ as supporting material. which of the following statements about the sleeper effect and its impact on persuasion are accurate and which are not? what is the independent variable in which cleans teeth better baking soda or toothpaste alexander lukashenko, the dictator of belarus, is accused of poisoning his chief rival with a deadly soviet-style nerve agent. why? Construct a 99% confidence interval of the population proportion using the given information.x = 75, n = 250 theorists who attribute some of the causes of deviant behavior to biology are employing ___ theories. Find dz/dt in two ways: by using the Chain Rule, and by first substituting the expressions for x and y to write z as a function of t. Do your answers agree?z= x^2y+xy^2, x = 3t y = t^2