The derivative of the function z= x^2y+xy^2, x = 3t y = t^2 using the chain rule is given by dz/dt = 36t^3 + 15t^4.
Expressions are equals to,
z= x^2y+xy^2
x = 3t
y = t^2
Using the chain rule calculate dz/dt,
which states that if z is a function of x and y,
And x and y are both functions of t, then,
dz/dt = (dz/dx)(dx/dt) + (dz/dy)(dy/dt)
Using these expressions, calculate the value of dz/dt using the chain rule,
z= x^2y+xy^2
This implies,
dz/dx = 2xy + y^2
dz/dy = x^2 + 2xy
x = 3t
⇒ dx/dt = 3
y = t^2
⇒ dy/dt = 2t
Substituting these values into the chain rule formula, we get,
dz/dt = (2xy + y^2)(3) + (x^2 + 2xy)(2t)
= [2(3t)(t^2 ) + (t^2)^2 ]3 + [(3t)^2 + 2(3t)(t^2)](2t )
= [ 6t^3 + t^4 ]3 + [ 9t^2 + 6t^3 ]2t
= 18t^3 + 3t^4 + 18t^3 + 12t^4
= 36t^3 + 15t^4
Substituting the given expressions for x and y into z, we get,
z = (3t)^2(t^2) + (3t)(t^2)^2
= 9t^4 + 3t^5
here also,
dz/dt = 36t^3 + 15t^4
Therefore, the value of the function using the chain rule dz/dt is equals to 36t^3 + 15t^4.
learn more about chain rule here
brainly.com/question/24391730
#SPJ4
Let y denote the number of broken eggs in a randomly selected carton of one dozen eggs. y 0 1 2 3 4 ply) 0.60 0.20 0.15 0.03 0.02 (a) Calculate and interpret Hy My = 0.20 (b) In the long run, for what proportion of cartons is the number of broken eggs less than jy? (Round your answer to two decimal places). Enter a number. Does this surprise you? Yes O No 0 + 1 + 2 + 3 + 4 (c) Explain why sy is not equal to = 2.0. 5 This computation of the mean is incorrect because the value in the denominator should equal the maximum y value. This computation of the mean is incorrect because it does not take into account that the number of broken eggs are all equally like O This computation of the mean is incorrect because it includes zero in the numerator which should not be taken into account when O This computation of the mean is incorrect because it does not take into account the number of partially broken eggs.
a) The value of Hy = 1.15
b) The proportion of cartons with less than 1.15 broken eggs is 0.60
c) The answer is B)This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like.
(a) Hy = 0.67, which means that on average, there are 0.67 broken eggs per carton.
Hy = (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1
= 0.67
(b) The proportion of cartons with less than 0.67 broken eggs is 0.60 which is probability of 0 broken eggs.. This may be surprising as the probability of having less than 0.67 broken eggs is only 0.60, but this is due to the fact that the distribution is skewed towards higher values.
(c) Hy is not equal to the simple average of 0, 1, 2, 3, and 4 because the distribution is not symmetrical. The probabilities are weighted towards higher values, which increases the mean. Additionally, the value of zero should be included in the calculation, as it represents a possible outcome. Therefore, the correct formula for Hy is (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1 = 0.67.
To know more on symmetrical distribution
https://brainly.com/question/31184447
#SPJ4
--The question is incomplete, answering to the question below--
"Let y denote the number of broken eggs in a randomly selected carton of one dozen eggs.
y 0 1 2 3 4
p(y) 0.60 0.20 0.15 0.03 0.02
(a) Calculate and interpret Hy
(b) In the long run, for what proportion of cartons is the number of broken eggs less than Hy? (Round your answer to two decimal places).
Does this surprise you?
Yes
No
(c) Explain why Hy is not equal to (0 + 1 + 2 + 3 + 4)/5 = 2.0.
A. This computation of the mean is incorrect because the value in the denominator should equal the maximum y value.
B. This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like
C. This computation of the mean is incorrect because it includes zero in the numerator which should not be taken into account when
D. This computation of the mean is incorrect because it does not take into account the number of partially broken eggs."
Answer the question below: *
Tasha is planning an expansion of a square flower garden in a city park. If each side of the original garden is
increased by 5 m, the new total area of the garden will be 121 m². Find the length of each side of the original garden.
O 6 meters
O 6.6 meters
O 11 meters
O 16 meters
Sea "x" la longitud de cada lado del jardín original en metros.
La superficie del jardín original es x^2 m².
Si cada lado del jardín original se aumenta en 5 m, el nuevo lado del jardín será de (x+5) metros, y la nueva superficie será (x+5)^2 m².
Según el problema, la nueva superficie total es de 121 m²:
(x+5)^2 = 121
Tomando la raíz cuadrada en ambos lados:
x+5 = 11
Restando 5 en ambos lados:
x = 6
Por lo tanto, la longitud de cada lado del jardín original es de 6 metros.
Por lo tanto, la respuesta correcta es O 6 metros.
x - the length of each side of the original garden
A = x²
( x + 5 )² = 121 /√
x + 5 = 11, or x + 5 = - 11;
x = 11 - 5
x = 6 ( another solution in negative )
Answer:
A ) 6 m
Question 6 (2 points)
A wire costs $3 per foot. How much will 18 inches of wire cost?
$1.50
$3.00
$4.50
$9
Answer:
$4.50
Step-by-step explanation:
There are 12 inches in a foot. 18 inches is 1.5 feet.
1 foot of wire is $3.00 and a half of foot should be $1.50.
1.5 feet of wire should cost $4.50
1.5 ft × $3/ft
= $4.50
Whenever we construct a confidence interval for the population mean, the margin of error includes the standard error of x bar and theA. sampling biasB. nonresponse biasC. z or t value associated with a 95% confidence levelD. desired level of confidence
The margin of error in a confidence interval for the population mean includes the standard error of the sample mean and the z or t value associated with a certain level of confidence, usually 95% or 99%. Therefore, the correct answer is (C).
Sampling bias and nonresponse bias are potential sources of error in survey or study design and data collection, but they are not directly related to the construction of a confidence interval.
The desired level of confidence is a key input for determining the z or t value used in the calculation of the margin of error, but it is not included in the margin of error itself. The correct answer is z or t value associated with a 95% confidence level.
So, the correct option is (C).
To know more about confidence interval:
https://brainly.com/question/24131141
#SPJ4
The simple interest formula 1 =
PRT
100
gives the interest I on a principal P
invested at a rate of R% per annum for
Tyears.
a) Find the interest when GH 2500 is
invested at 5% p.a. for 4 years.
b) Find the principal that gains an interest
of GH 2590 in 5 years at 7% per
annum,
The interest earned on GH 2500 at 5% p.a. for 4 years is GH 500.
The principal that gains an interest of GH 2590 in 5 years at 7% per annum is approximately GH 7400.
What is simple interest ?
Simple interest is a type of interest that is calculated on the principal amount of a loan or investment at a fixed rate for a specified period of time. It is based only on the principal amount, and does not take into account any interest earned on previous periods.
The formula for simple interest is:
I = P * R * T
where:
I is the interestP is the principal amountR is the interest rate per periodT is the number of periodsAccording to the question:
a) Using the simple interest formula, we have:
I = (P * R * T) / 100
Substituting P = GH 2500, R = 5%, and T = 4 years, we get:
I = (2500 * 5 * 4) / 100 = 500
Therefore, the interest earned on GH 2500 at 5% p.a. for 4 years is GH 500.
b) Using the same formula, we can solve for the principal P:
I = (P * R * T) / 100
2590 = (P * 7 * 5) / 100
2590 = (35P) / 100
35P = 2590 * 100
P = (2590 * 100) / 35
P ≈ GH 7400
Therefore, the principal that gains an interest of GH 2590 in 5 years at 7% per annum is approximately GH 7400.
To know more about Simple interest visit:
https://brainly.com/question/20406888
#SPJ1
This problem explores some questions regarding the fishery model
dt
dP
=P(1−P)−h
If you have not yet run the Jupyter notebook please do so now. Find analytical expressions for the two fixed points of the model, in terms of
h
. Give an expression for the stable fixed point. You may assume that the larger fixed point is the stable one. For what values of
h
does there exist a fixed point?
a) The expression for the stable fixed point is P* = (1 + sqrt(1 - 4h)) / 2
b) There exists a fixed point for all values of h less than or equal to 1/4.
The fixed points of the model are the values of P at which dP/dt = 0. Therefore, we need to solve the equation
P(1-P) - h = 0
Expanding the left-hand side, we get
P - P^2 - h = 0
Rearranging, we get a quadratic equation
P^2 - P + h = 0
Using the quadratic formula, the two solutions for P are
P = (1 ± sqrt(1 - 4h)) / 2
a) The larger root is the stable fixed point, as it corresponds to a minimum of the fish population growth function. Therefore, the expression for the stable fixed point is
P* = (1 + sqrt(1 - 4h)) / 2
b) For the model to have a fixed point, the quadratic equation must have real roots. This occurs when the discriminant (the expression inside the square root) is non-negative
1 - 4h ≥ 0
Solving for h, we get
h ≤ 1/4
Learn more about quadratic equation here
brainly.com/question/30098550
#SPJ4
The given question is incomplete, the complete question is:
This problem explores some questions regarding the fishery model
dP/dt =P(1−P)−h
If you have not yet run the Jupyter notebook please do so now. Find analytical expressions for the two fixed points of the model, in terms of h
a) Give an expression for the stable fixed point. You may assume that the larger fixed point is the stable one. b) For what values of h does there exist a fixed point?
Represent each number line by an inequality.
Answer:
Step-by-step explanation:
The inequality in the first equation is x > 8.
The inequality for the second graph is x ≤ -4 since it's a dot.
Instructions: Use the following data set to find the sample statistics for the
following data set. (Round answers to the nearest hundredth, if necessary.
{51, 48, 42, 43, 48, 48, 46, 15, 29, 45,
47, 55, 46, 35, 47, 48, 54, 26, 53, 42}
1.
2.
<<>>
11
4. Mode =
(>>
3. Median =
=
11
By using sample standard deviation - (1) N or n = 20
(2) X or μ = 43.4
(3) σ = 9.78 and s = 10.04
Why does sample standard deviation exist?
When we talk about a sample standard deviation, we're not talking about population standard deviation. The average amount by which a group of values deviates from their mean is shown by the statistical measure of variability known as the standard deviation.
We are given with the following data set below;
{51, 48, 42, 43, 48, 48, 46, 15, 29, 45, 47, 55, 46, 35, 47, 48, 54, 26, 53, 42}
(1) As we can see in the above data that there are 20 data values in our data set which means that the value of N or n (numner of observations) is 20.
(2) The formula for calculating Mean of the data, i.e. X or μ is given by;
Mean = 51 +48+ 42+ 43+ 48 + 48 + 46+ 15+ 29+ 45+ 47+ 55+ 46+ 35+ 47+ 48+ 54+ 26+ 53+ 42/20
= 868/20 = 43.4
So, the value of X or μ is 43.4.
(3) The formula for calculating population standard deviation () is given by;
Standard deviation, σ = √(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20
= 9.78
Similarly, the formula for calculating sample standard deviation (s) is given by;
Sample Standard deviation, s =
√(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20 - 1
= 10.04
Learn more about sample standard deviation
brainly.com/question/24277447
#SPJ1
The graph of triangle has coordinates E(1,4) F(-1,1) and G(2,-1). Graph triangle of EFG and it’s image after a translation of 3 units left and 1 unit down.
Answer:
Step-by-step explanation:1.4 -1, 1 2, -1
Scenario #3:
Imagine you find a map with a scale of 1:63,360. On that map, you see your hiking destination is
seven inches from your current location.
(a) How far away is that in reality (in miles)?
(b) Explain how you arrived at this decision.
SHOW YOUR WORK! This includes the potential for partial value, if incorrect.
Answer:
7 miles
Step-by-step explanation:
Note there are 63,360 inches in a mile.
So, rewrite scale as 1 inch: 1 mile, where inch replaces the unit.
Therefore 7 inches: 7 miles.
please help me 60 points
Answer:
Matt would walk 8 miles in to hours.
Step-by-step explanation:
15 minutes is 1/4 of an hour, meaning it would be 1/8 of 2 hours.
1 mile times 8 = 8 miles
Hope that helps!
Plsss help due today!!
The writer’s guild only gives a lifetime achievement award out every 5 years and was curious to see how the population in Europe felt about their process.
They decided to conduct an opinion survey by selecting a random sample of 500 Europeans who made book purchases online in 2022. They emailed the survey to all 500 randomly selected online shoppers and received 127 responses.
9) Describe the population of interest.,
10) Describe the sample.
11) Give an example of a parameter they might be interested in calculating from the survey.
12) Give an example of a statistic they might report based on the parameter you gave above.
Answer:
The population of interest is all Europeans who make book purchases online in 2022.The sample is the randomly selected 500 Europeans who make book purchases online in 2022, to whom the survey was emailed, and the 127 who responded to the survey.A parameter they might be interested in calculating from the survey is the proportion of all Europeans who make book purchases online in 2022 who support the writer’s guild's process of giving a lifetime achievement award out every 5 years.A statistic they might report based on the parameter above is the proportion of the 127 respondents who support the writer’s guild's process of giving a lifetime achievement award out every 5 years, and an estimate of the proportion of all Europeans who make book purchases online in 2022 who support this process, based on the sample data.a friend has an 81% average before a final exam. The score includes everything but the final, which counts for 15% of the grade. What is the minimum to earn 75% for the course?
Answer:
57
Step-by-step explanation:
Okay, So we have this person That has 81% average before the quiz. For a course That score includes everything, but the final, which counts for 25% of the course grade, was the best course grade you your friend can earn. Okay, The best course grade given to me makes me. Mhm. 100. So we have .81 times. Actually we'll keep this as 81, times .75 right Plus 100 times. Excuse ME, Time 0.25. This is equivalent to 81 times 0.75. Mhm. This is equivalent to 81 times .75 plus 100 times 0.25, Which equals 85.75%. Now that's for part one. Report to we have what is the minimum score? Turn to 75%. So we have 75 equal to 81 times 0.75 Plus X. Times zero 25. So 81 times 0.75 equals 60.75 75- is value mhm. Is equal to 14.25. So we have 0.25 x. And if we divide 14.25 over 0.25, we isolate X. So the minimum score to get a 75 is a 57
Please answer Full question
(1) 4y-7z is a binomial.
(2) 8-xy² is a binomial.
(3) ab-a-b can be written as ab - (a + b) which is a binomial.
(4) z²-3z+8 is a trinomial.
What are monomials, binomials and trinomials?In algebra, monomials, binomials, and trinomials are expressions that contain one, two, and three terms, respectively.
A monomial is an algebraic expression with only one term. A monomial can be a number, a variable, or a product of numbers and variables.
A binomial is an algebraic expression with two terms that are connected by a plus or minus sign. For example, 2x + 3y and 4a - 5b are both binomials.
A trinomial is an algebraic expression with three terms that are connected by plus or minus signs.
Learn more about monomial on;
https://brainly.com/question/29047865
#SPJ1
Classify into monomials, binomials and trinomials.
(1) 4y-7z
(1) 8-xy²
(v) ab-a-b
(ix) z2-3z+8
p(s) = s³ + 10s
f(s) = 6s - 3
Find p(2)-f(2)
Answer:
19
Step-by-step explanation:
We are given the following two functions of s
[tex]p(s) = s^3 + 10s\\f(s) = 6s - 3\\\\\text{To find p(2) substitute 2 for s in p(s)}\\p(2) = (2)^3 + 10(2) = 8 + 20 = 28\\\\[/tex]
[tex]\text{To find f(2) substitute 2 for s in f(s)}\\f(2) = 6(2) - 3= 12 - 3= 9\\[/tex]
[tex]p(2) - f(2) = 28 - 9 = 19[/tex]
What’s 9 X 3/9 answer…………………………………….
Answer:
9 x 3/9
= 39 ⋅ 3= 2727/9
27 ÷ 9
= 3Step-by-step explanation:
You're welcome.
Fill in the missing values to make the equations true.
Por favor, necesito ayuda con esto es de estadística. Muchas gracias
Las calificaciones de 20 alumnos que presentaron exámen de admisión a cierta facultad, utilizando la escala de 0 a 100, fueron:
83 64 51 46 82 91 73 82 65 61 74 64 75 81 94 65 42 81 56 61 72 65 54 39 70 93 42 46 54 72
•Elaborar: diagrama de tallo y hoja
•Calcular: coeficiente de variación
•Realizar un diagrama de caja
•Percentil 85, decil 2
Therefore, the coefficient of variation for the given data is approximately 24.71%.
What is box plot?A box plot, also known as a box-and-whisker plot, is a graphical representation of a data set that shows the distribution of the data using quartiles. It is a standardized way of displaying the distribution of data based on the five-number summary: minimum, first quartile, median, third quartile, and maximum. The box represents the middle 50% of the data, with the median marked by a line inside the box. The whiskers extend from the box to the minimum and maximum values, or to a certain range if there are outliers. Box plots are useful for comparing the distributions of different data sets and identifying potential outliers.
Here,
1. Stem-and-Leaf Plot:
A stem-and-leaf plot is a way to display data that separates the tens digit of each number from the ones digit. Here is the stem-and-leaf plot for the given data:
3 | 9 9
4 | 2 2 6 6
5 | 1 4 4 6
6 | 1 4 5 5 5 5 5 5
7 | 0 2 3 4
8 | 1 2 2 3 5
9 | 3 4
In this plot, the stem represents the tens digit and the leaves represent the ones digit.
2. Coefficient of Variation:
The coefficient of variation is a measure of the relative variability of a data set. It is calculated as the ratio of the standard deviation to the mean, expressed as a percentage. Here is how to calculate the coefficient of variation for the given data:
Calculate the mean of the data:
Mean = (83+64+51+46+82+91+73+82+65+61+74+64+75+81+94+65+42+81+56+61+72+65+54+39+70+93+42+46+54+72)/20 = 68.25
Calculate the standard deviation of the data:
Standard deviation = sqrt((1/20) * ((83-68.25)^2 + (64-68.25)^2 + ... + (72-68.25)^2))
Standard deviation ≈ 16.88
Calculate the coefficient of variation:
Coefficient of variation = (Standard deviation / Mean) * 100
Coefficient of variation ≈ 24.71%
3. Box Plot:
A box plot is a way to visualize the distribution of data. It displays the minimum value, first quartile (Q1), median, third quartile (Q3), and maximum value of the data. Here is the box plot for the given data:
| +----------+
94 | |
| +----------+
93 | |
| +-----+-----+
82 | | |
| | |
81 | | |
| +-----+ |
80 | | |
| | |
79 | | |
| | |
78 | | |
| | |
77 | | |
| | |
76 | | |
| | |
75 | | |
| | |
74 | | |
| | |
73 | | |
| | |
72 | +-----------------+
|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
In this plot, the horizontal line inside the box represents the median, the bottom and top edges of the box represent the first and third quartiles (Q1 and Q3), respectively, and the vertical lines extending from the box represent the minimum and maximum values, excluding outliers.
4. To find the 85th percentile, we need to arrange the data in order from smallest to largest:
39, 42, 42, 46, 46, 51, 54, 56, 61, 61, 64, 64, 65, 65, 65, 70, 72, 72, 73, 74, 75, 81, 81, 82, 82, 83, 91, 93, 94
There are a total of 20 scores, so the 85th percentile would be the score at the 0.85(20) = 17th position:
85th percentile = 72
To find the 2nd decile, we first need to calculate the number of scores in each decile. Since there are 20 scores, each decile would have 2 scores. The 2nd decile would be the score at the 0.2(20) = 4th position:
2nd decile = 46
To know more about box plot,
https://brainly.com/question/1523909
#SPJ1
Complete question:
Please, I need help with this, it's about statistics. Thank you very much. The grades of 20 students who took an admission exam to a certain faculty, using a scale of 0 to 100, were: 83 64 51 46 82 91 73 82 65 61 74 64 75 81 94 65 42 81 56 61 72 65 54 39 70 93 42 46 54 72
• Make: stem-and-leaf plot
• Calculate: coefficient of variation
• Create a box plot
• 85th percentile, 2nd decile.
Help please! I have no idea!!!!
The values of the function from the graph are h(7) = 10, h(0) = 9, h(t) = 8, t = 5 and h(t) = 0, t = 4
How to determine the value of the functionGiven that the graph is the graph of height as a function of time
To calculate the values of h(t) from the graph of g(x), we need to follow these steps
Identify the value of t on the x-axis where you want to calculate the value of h(t)Locate that point on the graphWrite the values from the pointUsing the above, we have the following
h(7) = 10
h(0) = 9
h(t) = 8, t = 5
h(t) = 0, t = 4
Read more about functions at
https://brainly.com/question/1415456
#SPJ1
Ignacio makes a display shelf from 4 wooden boards. All angles formed by the
boards are right angles. Ignacio plans to stain all faces of the shelf, except the
back face, which will be against the wall. What is the total area Ignacio will
stain? Show your work.
512
7 in.
1
2
32 in.
30 in.
72
17
56
9 in.
4 in.
512
24
A
329-30.7
72
Answer:
shelf area = 19018.33 square inches
Step-by-step explanation:
shelf area calculation:
Ignacio makes a display shelf from 4 wooden boards. All angles formed by the boards are right angles. Ignacio plans to stain all faces of the shelf, except the back face, which will be against the wall. What is the total area Ignacio will stain? Show your work. 512 7 in. 1 2 32 in. 30 in. 72 17 56 9 in. 4 in. 512 24 A 329-30.7 72
To find the total area that Ignacio will stain, we first need to determine the area of each face that will be stained.
Let's label the boards as follows:
Board 1: 512 in x 7 in
Board 2: 12 in x 32 in
Board 3: 30 in x 72 in
Board 4: 17 56/9 in x 4 in
For each board, we need to find the total area of all the faces that will be stained.
Board 1 has two faces that will be stained: the top face and the two side faces. The area of the top face is 512 in x 7 in = 3584 in^2. The area of each side face is 512 in x 12 in = 6144 in^2. So the total area of all three faces is 3584 in^2 + 2 x 6144 in^2 = 15872 in^2.
Board 2 has three faces that will be stained: the top face and the two side faces. The area of the top face is 12 in x 32 in = 384 in^2. The area of each side face is 12 in x 4 in = 48 in^2. So the total area of all three faces is 384 in^2 + 2 x 48 in^2 = 480 in^2.
Board 3 has three faces that will be stained: the top face and the two side faces. The area of the top face is 30 in x 72 in = 2160 in^2. The area of each side face is 72 in x 4 in = 288 in^2. So the total area of all three faces is 2160 in^2 + 2 x 288 in^2 = 2736 in^2.
Board 4 has two faces that will be stained: the top face and the side face. The area of the top face is 17 56/9 in x 4 in = 71 2/3 in^2. The area of the side face is 17 56/9 in x 9 in = 158 2/3 in^2. So the total area of both faces is 71 2/3 in^2 + 158 2/3 in^2 = 230 1/3 in^2.
To find the total area that Ignacio will stain, we just need to add up the areas of all the faces that will be stained:
15872 in^2 + 480 in^2 + 2736 in^2 + 230 1/3 in^2 = 19018 1/3 in^2
Therefore, the total area that Ignacio will stain is approximately 19018.33 square inches.
original question :
Ignacio makes a display shelf from 4 wooden boards. All angles formed by the boards are right angles. Ignacio plans to stain all faces of the shelf, except the back face, which will be against the wall. What is the total area Ignacio will stain? Show your work. 512 7 in. 1 2 32 in. 30 in. 72 17 56 9 in. 4 in. 512 24 A 329-30.7 72
chatgpt
A survey of 500 music lovers showed that 350 like rock, 300 like country, and 200 like both. How many of the 500 music lovers surveyed dislike both rock and country?
Answer:
50
Step-by-step explanation:
A Venn diagram is very helpful for this picture and I've included one in the attached.
If we look at the numbers we're given, we see that the numbers do not add up to 500 as 350 + 300 + 200 = 850.
However, we can work through the numbers to find the exact values and eventually the number of people that liked neither rock nor country.
Since 200 people like both rock and country, these people are part of the 350 people that like rock.
We can find the number of people who like rock only by subtracting 200 from 350:
350 - 200 = 150 (Rock only)
Using the same logic from above, we know that the 200 people who like both rock and country are a part of the 300 people who like country.
We can find the number of people who like country only by subtracting 200 from 300:
300 - 200 = 100 (Country only)
Currently, we have 450/500 as 150 + 200 + 100 = 450.
Now, we can find the number of people who like neither rock nor country by subtracting 450 from 500:
500 - 450 = 50 (Neither rock nor country)
We can check that the numbers we found equal 500:
Rock only + Both rock and country + Country only + Neither rock nor country = Total amount of music lovers surveyed
150 + 200 + 100 + 50 = 500
500 = 500
(**In the attached Venn diagram, M stands for the total set of music lovers, R stands for rock only, B stands for both, C stands for country only, and N stands for neither)
Segment AE shown has length of sqrt 20. Which segment is closest in length to sqrt 10?
Segment C has a length of √10, which is the closest to √10 compared to the other segments.
What is Segment?Segment is a customer data platform (CDP) that enables companies to collect, store, and analyze customer data from multiple sources. It helps companies build customer profiles and create personalized experiences for their customers. Segment allows businesses to track website visits, user actions, and other events in real-time, as well as to create custom events and store customer data in a secure and unified data warehouse. With Segment, companies can create powerful customer segmentation, which allows them to target customers with personalized messages and offers. Segment also integrates with various marketing, analytics, and CRM tools to provide a complete picture of customer behavior. It enables companies to build cohesive customer journeys, run campaigns, and optimize their customer experience.
To learn more about Segment
https://brainly.com/question/551912
#SPJ1
Complete Question.
Please help ASAP!!!! The average of two numbers is 13.One number is 10.What is the other number?
Answer:16
Step-by-step explanation:
average is similar to mean
you get the Total value and divide it with the number of values added
what does -12x +24= equal
To solve the equation -12x + 24 = 0, we want to get x by itself on one side of the equation.
First, we can subtract 24 from both sides:
- 12x + 24 - 24 = 0 - 24
This simplifies to:
- 12x = -24
Next, we can divide both sides by -12:
- 12x / -12 = -24 / -12
This simplifies to:
x = 2
Therefore, the solution to the equation -12x + 24 = 0 is x = 2.
What triangles are similar to triangle ABC?
Answer:
A right angled triangle is similar to triangle ABC
Step-by-step explanation:
If you tilt the triangle and put it straight, you'll see that angle C is equal to 90°
And if a triangle has one angle of 90° then it is a right angled triangle
Hope you understand :)
please help I know its 9:35 PM I Just need help what this question2.1 × 1.6 =
21
10
×
16
10
= tenths × tenths my parents are gonna kill me help
The value of the expression 2.1 × 1.6 = 3.36.
What are decimals?Decimals are a collection of numbers falling between integers on a number line. They are only an additional mathematical representation of fractions. Decimals allow us to express quantifiable quantities like length, weight, distance, money, etc. with more accuracy. Integers, also known as whole numbers, are represented to the left of the decimal point, while decimal fractions are shown to the right of the decimal point.
Given that the expression is: 2.1 × 1.6.
2.1 × 1.6 can be written as:
2.1 × 1.6 = 21/10 × 16/10
Multiply the numerator and denominator:
21/10 × 16/10 = 336/100
Covert the fraction into decimal:
336/100 = 3.36
Hence, the value of the expression 2.1 × 1.6 = 3.36.
Learn more about decimals here:
https://brainly.com/question/30958821
#SPJ1
Part B
Draw
parallel to
. You can draw
any length and place it anywhere on the coordinate plane, but not on top of
.
Find and record the ratio, n, of the length of
to the length of
. Then, multiply the lengths of
and
by n and record the resulting lengths.
In a diagram,
Then,
[tex]\dfrac{DE}{BC}=n[/tex]
For example, suppose that n=2; thus,
[tex]DE=2BC\longrightarrow2\times CA[/tex]
We can form a new triangle DEF whose side EF is parallel to CA; therefore,
[tex]\longrightarrow EF=2CA[/tex]
You have been hired t0 design family-friendly see-saw. Your design will featurc uniform board (mass M , length L) that can be moved so that the pivot is distance d from the center of the board. This will allow riders t0 achieve static equilibrium even if they are of different mass_ as most people are _ You have decided that each rider will be positioned so that hishher center of mass will be distance Xoffset from the end of the board when seated as shown. You have selected child of mass m (shown on the right) , and an adult of mass times the mass of the child (shown On the left) to test out your prototype. (a) Derive an expression for the torque applied by the adult rider (on the left) in terms of given quantities and variables available in the palette. Assume counterclockwise is positive_ Xoffct Xottct (b) Derive an expression for the torque applied by the child rider (on the right) in terms of given quantities and variables available in the palette . Assume counterclockwise is positive. Derive an expression for the torque applied by the board in terms of given quantities and variables available in the palette_ Othcexpertta.COm Determine the distance d in terms of n, g and the masses and lengths in the problem. Determine the magnitude of the force exerted on the pivot point by the see-saw while in use in terms of given quantities and variables available in the palette'
Where F_pivot is the magnitude of the force exerted on the pivot point.
What are perpendicular lines?
Perpendicular lines are lines that intersect at a right angle (90 degrees). In other words, if you draw a line perpendicular to another line, the two lines will form four right angles at the point where they intersect.
(a) The torque applied by the adult rider (on the left) can be calculated as the product of the force applied by the rider and the perpendicular distance from the pivot to the force. Let F_a be the force applied by the adult rider and let r_a be the perpendicular distance from the pivot to the force. Then, the torque applied by the adult rider is:
τ_a = F_a * r_a
The perpendicular distance r_a can be calculated using the Pythagorean theorem:
r_a = sqrt((L/2 - d)^2 + Xoffset^2)
Therefore, the torque applied by the adult rider is:
τ_a = F_a * sqrt((L/2 - d)^2 + Xoffset^2)
(b) Similarly, the torque applied by the child rider (on the right) can be calculated as:
τ_c = F_c * sqrt((L/2 + d)^2 + Xoffset^2)
where F_c is the force applied by the child rider and r_c is the perpendicular distance from the pivot to the force, which can be calculated using the Pythagorean theorem.
(c) The torque applied by the board can be calculated as the sum of the torques applied by the two riders:
τ_b = τ_a + τ_c
Substituting the expressions for τ_a and τ_c, we get:
τ_b = F_a * sqrt((L/2 - d)^2 + Xoffset^2) + F_c * sqrt((L/2 + d)^2 + Xoffset^2)
(d) To determine the distance d in terms of given quantities and variables, we can use the condition for static equilibrium, which requires that the sum of the torques about the pivot point is zero:
τ_a + τ_c = 0
Substituting the expressions for τ_a and τ_c and simplifying, we get:
F_a * (L/2 - d) = F_c * (L/2 + d)
Solving for d, we get:
d = (F_a/F_c - 1) * L/4
Substituting F_a = Mg and F_c = mg, where M is the mass of the adult rider, m is the mass of the child rider, and g is the acceleration due to gravity, we get:
d = (M/m - 1) * L/4
(e) The magnitude of the force exerted on the pivot point by the see-saw while in use can be calculated using the condition for static equilibrium, which requires that the sum of the forces in the vertical direction is zero:
F_a + F_c = Mg + mg
Substituting F_a = Mg and F_c = mg, we get:
F_pivot = Mg + mg
Therefore, where F_pivot is the magnitude of the force exerted on the pivot point.
To learn more about perpendicular line from the given link:
https://brainly.com/question/29268451
#SPJ1
A card is pulled from a deck of cards and noted. The card is then replaced, the deck is shuffled, and a second card is pulled and noted. What is the probability that both cards are face cards?
Answer: There is a 5.32544378% Chance of a face card being pulled twice
Step-by-step explanation: If there is 52 cards in a deck, and 12 of them are face cards, there is roughly a 23% (23.0769%) chance of pulling one in the first draw. Multiply .230769 x .230769 and you get .0532544378 which equals 5.32544378%
Examine the following graphed systems of linear inequalities. Select the points below that are solutions to each system of inequalities. Select TWO that apply.
1. 2.
(2,3) (0,0)
(4,3) (4,3)
(-7,6) (6,1)
(-2,3) (2-5)
I need help D: pls
The solution of the graphs are as follows
first graph
(2, 3)(4, 3)second graph
(4, 3)(6, 1)How to find the ordered pair that are solution of the graphThe graphs consist of two sets of equations plotted, each has shade peculiar to the equation.
The solution of the graph consist of the ordered pair that fall within the parts covered by the two shades
For the first graph by the left, the solutions are
(2, 3)(4, 3)For the second graph by the left, the solutions are
(4, 3)(6, 1)Learn more about inequality graphs at:
https://brainly.com/question/24372553
#SPJ1
