Answer:
2.25 M
Explanation:
The reaction that takes place is:
2KI + Pb(NO₂)₃ → PbI₂ + 2KNO₃First we calculate how many potassium iodide moles reacted, using the given volume and concentration:
15.00 mL * 3.00 M = 45 mmol KIThen we convert 45 mmoles of KI into mmoles of Pb(NO₂)₃, using the stoichiometric coefficients of the balanced reaction:
45 mmol KI * [tex]\frac{1mmolPb(NO_3)_2}{2mmolKI}[/tex] = 22.5 mmol Pb(NO₂)₃Finally we calculate the molarity of the Pb(NO₂)₃ solution, using the calculated number of moles and given volume:
22.5 mmol Pb(NO₂)₃ / 10.00 mL = 2.25 Mwhat is speed lathe machine.
Answer:
A speed lathe is a type of lathe that is designed to operate much faster than its common counterpart.
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of carbonic acid and sodium hydroxide are combined. Assume excess base.
Answer:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to set up this net ionic equation, by firstly setting up the complete molecular equation as follows:
[tex]H_2CO_3(aq)+2NaOH(aq)\rightarrow Na_2CO_3(aq)+2H_2O(l)[/tex]
Thus, since carbonic acid is weak it merely ionizes whereas sodium hydroxides ionizes for the 100 % as it is strong; thus, we can write the complete ionic equation:
[tex]H_2CO_3(aq)+2Na^+(aq)+2OH^-(aq)\rightarrow 2Na^+(aq)+(CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Whereas sodium ions act as the spectator ones to be cancelled out for us to obtain:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Regards!
Calculate the mass of sodium phosphate in aqueous solution to fully react with 37 g of chromium nitrate(III) an aqueous solution?(report answer in grams and only three Sigg figs do not put the unit)
Answer:
41 g
Explanation:
The equation of the reaction is;
Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)
Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles
1 mole of sodium phosphate reacts with 1 mole of chromium nitrate
x moles of sodium phosphate react as with 0.25 moles of chromium nitrate
x= 1 × 0.25/1
x= 0.25 moles
Mass of sodium phosphate = 0.25 moles × 163.94 g/mol
Mass of sodium phosphate = 41 g
Consider the following reaction:
CO(g)+2H2(g)⇌CH3OH(g)
A reaction mixture in a 5.15-L flask at a certain temperature initially contains 26.6 g CO and 2.36 g H2. At equilibrium, the flask contains 8.63 g CH3OH.
Part A
Calculate the equilibrium constant (Kc) for the reaction at this temperature.
Answer:
26.6
Explanation:
Step 1: Calculate the molar concentrations
We will use the following expression.
M = mass solute / molar mass solute × liters of solution
[CO]i = 26.6 g / (28.01 g/mol) × 5.15 L = 0.184 M
[H₂]i = 2.36 g / (2.02 g/mol) × 5.15 L = 0.227 M
[CH₃OH]e = 8.63 g / (32.04 g/mol) × 5.15 L = 0.0523 M
Step 2: Make an ICE chart
CO(g) + 2 H₂(g) ⇄ CH₃OH(g)
I 0.184 0.227 0
C -x -2x +x
E 0.184-x 0.227-2x x
Since [CH₃OH]e = x, x = 0.0523
Step 3: Calculate all the concentrations at equilibrium
[CO]e = 0.184-x = 0.132 M
[H₂]e = 0.227-2x = 0.122 M
[CH₃OH]e = 0.0523 M
Step 4: Calculate the equilibrium constant (Kc)
Kc = [CH₃OH] / [CO] [H₂]²
Kc = 0.0523 / 0.132 × 0.122² = 26.6
Generally the vapor pressure of a liquid is related to: I. the amount of liquid II. atmospheric pressure III. temperature IV. intermolecular forces
Answer:
Atmospheric pressure, because a liquid is said to be boiling when the vapour pressure equals the atmospheric pressure.
What is an emission spectrum?
A. The total amount of energy emitted by an element
B. The products created when an element is burned
C. The energy absorbed when an electron gains energy
D. The colors of light given off when an element loses energy
Answer:
D
Explanation:
The electromagnetic radiation is emitted due to a particle moves from a higher to a lower energy state
An emission spectrum is the colors of light given off when an element loses energy. Therefore, option D is correct.
What is emission spectrum ?The electromagnetic radiation spectrum produced when an electron changes from a high energy state to a lower energy state is known as the emission spectrum of a chemical element or chemical compound.
An emission spectrum is the range of radiations that are released in different places when electrons jump back and forth between higher and lower energy levels to achieve stability.
Since what you are seeing is the direct radiation produced by the source, this form of spectrum is also known as an emission spectrum. You can see all the colors in the Sun's spectrum because light from the Sun is produced at practically all energies in the visible spectrum.
Thus, option D is correct.
To learn more about emission spectrum, follow the link;
https://brainly.com/question/27268130
#SPJ2
What direction would equilibrium moves towards based on the following if we increased the volume of the container.
[tex]2A_{(g)} + 5B_{(g)} + 12C_{(g)}[/tex] ↔ [tex]14AC_{(g)} + 5B_{(s)}[/tex]
Answer choices:
a) reactants
b) no change
c) products
d) decrease in volume
Please help!
To answer this question, we will first find out the number of gaseous moles on each side of the equilibrium
on the left:
we have 2 moles of A, 5 moles of B and 12 moles of C
which gives us a grand total of 19 gaseous moles
on the right:
here, we have 14 moles of AC gas, we will not count the number of moles of B because it's a solid
giving us 14 gaseous moles on the right
Where does the reaction shift?
more gaseous moles means more space taken, because gas likes to fill all the space it can
if we have more volume, more gas can move around without colliding (reacting) with each other
Hence more volume favors the side with more gaseous moles
here, the left has more gaseous moles. So we can say that the reaction will shift towards the left, or the reactants side
Answer:
Explanation:
given reversible chemical reaction:
2A(g) + 5B(g) + 12C(g) ↔ 14AC(g) + 5B(s)
chemicals in solid form do not take up a lot of volume so change in container volume has no effect
look at chemicals in gas form only:
the total no. of moles of reactants in gas form = 2 + 5 + 12 = 19
the total no. of moles of products in gas form = 14
so an increase in volume of the container will favor the reaction direction with higher volume n high volume means higher no. of moles
the ans is the equilibrium will move towards a) reactants
Question In nickel-cadmium batteries: Select the correct answer below: the anodes are nickel-plated and the cathodes are cadmium-plated the anodes are cadmium-plated and the cathodes are nickel-plated both the anodes and cathodes are plated with a nickel-cadmium alloy none of the above
Answer:
the anodes are cadmium-plated and the cathodes are nickel-plated
Explanation:
Nickel cadmium battery works on the principle as by the other cell. There is anode and a cathode which is separated by a separator (spiral shaped inside the case). The anode is negative and is cadmium plated while the cathode is positive and is nickel plated. An electrolyte is also used.
So the correct answer is : "The anodes are cadmium-plated and the cathodes are nickel-plated."
what is perodic table list all the elements up to 30 with their valencies
Answer:
a table of the chemical elements arranged in order of atomic number, usually in rows, so that elements with similar atomic structure (and hence similar chemical properties) appear in vertical columns.
What is true of all matter?
A. It pushes or pulls on objects.
B. You can see it.
C. It gives off heat energy.
D. It has mass.
1. Most of the chemicals included in your General Chemistry Lab kit can be discarded down a drain. Describe a situation in which you would need to neutralize a chemical before discarding down a drain.
Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.
Explanation:
A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.
Identify the phase of the copper product after each reaction in the copper cycle.
The addition of HNO3 HNOX3 to Cu ______________
The addition of H2SO4 HX2SOX4 to CuO ____________ The addition of Z n Zn to C u S O 4 CuSOX4 Choose... The addition of N a O H NaOH to C u ( N O 3 ) 2 Cu(NOX3)X2 Choose... The heating of C u ( O H )
Answer:
addition of HNO3 HNOX3 to Cu - Aueous
addition of H2SO4 HX2SOX4 to CuO - Aqueous
addition of Z n Zn to C u S O 4 CuSOX4 - Solid
addition of N a O H NaOH to C u ( N O 3 ) 2 Cu(NOX3)X2 - Solid
heating of C u ( O H ) - Solid
Explanation:
Copper when introduced with acids form an aqueous solution and fumes are released in air during the chemical reaction. When NaOH is added to copper then solid copper product is released. Copper dissolves on HNO but does not dissolves in HCL.
Use the Ka values for weak acids to identify the best components for preparing buffer solutions with the given pH values.
Name Formula Ka
Phosphoric acid H3PO4 7.5 x 10^-3
Acetic acid CH3COOH 1.8 x 10^-5
Formic acid HCOOH 1.8 x 10^-4
pH 1.9 =_________
pH 5.0 = ________
pH 3.9= ________
Answer:
pH= 1.9 then [tex]H_{3} PO_{4}[/tex]
pH = 5.0 , [tex]CH_{3} COOH[/tex]
pH = 3.9 , HCOOH
As we know range left [tex]pH= pKa+/- 1[/tex]
How much heat capacity, in joules and in calories, must be added to a 75.0-g iron block with a specific heat of 0.499J/g °C to increase its temperature from 25 °C to its melting temperature of 1535 °C?
Answer:
56511.75 J
13506.3 Calories
Explanation:
Applying,
Q = cm(t₂-t₁).................. Equation 1
Where Q = amount of heat, m = mass of the iron, c = specific heat capacity of the iron, t₁ = initial temperature, t₂ = final temperature.
From the question,
Given: m = 75 g, c = 0.499 J/g.°C, t₂ = 1535°C, t₁ = 25°C
Substitute these values into equation 1
Q = 75(0.499)(1535-25)
Q = 75(0.499)(1510)
Q = 56511.75 J
Q in Calories is
Q = (56511.75×0.239)
Q = 13506.3 Calories
What is "X" in the following reaction?
How many grams of NaF should be added to 500 mL of a 0.100 M solution of HF to make a buffer with a pH of 3.2
Answer:
2.25g of NaF are needed to prepare the buffer of pH = 3.2
Explanation:
The mixture of a weak acid (HF) with its conjugate base (NaF), produce a buffer. To find the pH of a buffer we must use H-H equation:
pH = pKa + log [A-] / [HA]
Where pH is the pH of the buffer that you want = 3.2, pKa is the pKa of HF = 3.17, and [] could be taken as the moles of A-, the conjugate base (NaF) and the weak acid, HA, (HF).
The moles of HF are:
500mL = 0.500L * (0.100mol/L) = 0.0500 moles HF
Replacing:
3.2 = 3.17 + log [A-] / [0.0500moles]
0.03 = log [A-] / [0.0500moles]
1.017152 = [A-] / [0.0500moles]
[A-] = 0.0500mol * 1.017152
[A-] = 0.0536 moles NaF
The mass could be obtained using the molar mass of NaF (41.99g/mol):
0.0536 moles NaF * (41.99g/mol) =
2.25g of NaF are needed to prepare the buffer of pH = 3.2Write a balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
Explanation:
An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.
The full equation is;
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
So, two electrons were lost in the process.
Consider the reaction “2 SO2 (g) + O2 (g) = 2 SO3 was 0.175 M. After 50 s the concentration of SO2 Date: (g)”. Initial concentration of SO2 (g) (g) became 0.0500 M. Calculate rate of the reaction
Answer:
The answer is "[tex]1.25 \times 10^{-3} \ \frac{m}{s}[/tex]"
Explanation:
Calculating the rate of the equation:
[tex]=-\frac{1}{2} \frac{\Delta [SO_2]}{\Delta t} =-\frac{\Delta [O_2]}{\Delta t}= +\frac{1}{2} \frac{\Delta [SO_3]}{\Delta t}\\\\=\frac{\Delta [SO_2]}{\Delta t}=\frac{0.0500-0.175\ M}{505}= -2.5 \times 10^{-3} \ \frac{m}{s}\\\\[/tex]
Rate:
[tex]=\frac{-2.5 \times 10^{-3}}{2}=1.25 \times 10^{-3} \ \frac{m}{s}[/tex]
How can this product be achieved using the starting material shown?
Answer:
this product can be achieved using the starting material shown is by use of NaOH as catalyst.
Answer:
By using NaOH as catalyst.
Explanation:
This product can be achieved using the starting material shown is by the use of the NaOH as catalyst.
If a 0.320 mM solution of MnO41- has an absorbance of 0.480 at 525 nm in a 1.000 cm cell. What is the concentration of a MnO41- solution that has absorbance of 0.490 in the same cell at that wavelength?
Answer:
Hence the concentration of a MnO41- solution that has absorbance of 0.490 in the same cell at that wavelength is 0.3266.
Explanation:
Now A = el, el=const
Then,
[tex]A2 / A1 = C2/ C1\\\\0.49/ 0.48 = C2 / 0.32\\\\C2 = 0.3266[/tex]
Read the chemical equation.
N2 + 3H2 - 2NH3
Using the volume ratio, determine how many liters of NH3 is produced if 4.2 liters of H2 reacts with an excess of N2
if all measurements are taken at the same temperature and pressure?
A 2.8 liters
B 3.2 liters
C 5.4 liters
D 6.3 liters
Answer:
A 2.8 liters
Explanation:
Step 1: Write the balanced equation
N₂ + 3 H₂ ⇄ 2 NH₃
Step 2: Establish the appropriate volume ratio
At the same temperature and pressure, the volume ratio of H₂ to NH₃ is 3:2.
Step 3: Calculate the volume of ammonia produced from 4.2 L of hydrogen
4.2 L H₂ × 2 L NH₃/3 L H₂ = 2.8 L
Viết các đồng phân cấu tạo mạch hở của C4H6O2 cùng nhóm chức axit
Answer:
+ axit
CH2=CH-CH2-COOH,
CH3-CH=CH-COOH (tính cả đồng phân hình học)
CH2=C(CH3)-COOH.
+ este
HCOOCH=CH-CH3 (tính cả đồng phân hình học)
HCOO-CH2-CH=CH2,
HCOOC(CH3)=CH2.
CH3COOCH=CH2
CH2=CH-COOCH3
A uniform plastic block floats in water with 50.0 % of its volume above the surface of the water. The block is placed in a second liquid and floats with 23.0 % of its volume above the surface of the liquid.
What is the density of the second liquid?
Express your answer with the appropriate units.
Answer:
density of second liquid = 650 kg/m³
Explanation:
Given that:
The volume of the plastic block submerged inside the water = 0.5 V
The force on the plastic block = [tex]\rho_1V_1g[/tex]
[tex]= 0.5p_1 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
W [tex]= 0.5p_1 V_g[/tex]
[tex]\rho Vg = 0.5p_1 V_g[/tex]
[tex]\rho = 0.5 \rho _1[/tex]
where;
water density [tex]\rho _1[/tex] = 1000
[tex]\rho = 0.5 (1000)[/tex]
[tex]\rho = 500 kg/m^3[/tex]
In the second liquid, the volume of plastic block in the water = (100-23)%
= 77% = 0.7 V
The force on the plastic block is:
[tex]= 0.77p_2 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
[tex]W = 0.77p_2 V_g[/tex]
[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]
[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]
Inter-molecular forces determine the _______________ properties while intra-molecular forces determine the ________ properties of compounds.
Answer:
Physical
Chemical
Explanation:
Intermolecular forces are the forces that hold the molecules of a substance together in a particular state of matter. They decide the physical properties of a substance.
The intra molecular forces are the bond forces that hold atoms together in molecules. The nature of this bonding determines the chemical properties of substances.
a chemist combines 4.9 g of nitrogen gas with 9.4 grams of nitrogen gas to form 11.4 g of ammonia 2.9 g of nitrogen is remaining
How can a Bose-Einstein condensate be formed? A. B super-heating a gas. B. By super-cooling certain types of solid. C. By super-cooling certain types of plasma. D. By super-heating a plasma
Answer:
C. By super-cooling certain types of plasma.
Explanation:
Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.
Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.
When certain types of plasma are super cooled, Bose-Einstein condensate are formed.
Determine the equilibrium constant, Keq, at 25°C for the reaction
2Br- (aq) + I2(s) <--> Br2(l) + 2I- (aq)
Eocell = (0.0257/n) lnKeq, Calculate Eocell from Use this equation to calculate K value.
Eo (I2/I-) = +0.53, Eo (Br2/Br-) = +1.07,
Explanation:
The given chemical reaction is:
[tex]2Br^- (aq) + I_2(s) <-> Br_2(l) + 2I^- (aq)[/tex]
[tex]E^ocell=oxidation potential of anode + reduction potential of cathode\\[/tex]
The relation between Eo cell and Keq is shown below:
[tex]deltaG=-RTlnK_e_q\\delta=-nFE^o cell\\=>nFE^o cell=RTlnK_e_q\\lnK_e_q=\frac{nF}{RT} E^o cell[/tex]
The value of Eo cell is:
Br- undergoes oxidation and I2 undergoes reduction.
Reduction takes place at cathode.
Oxidation takes place at anode.
Hence,
[tex]E^ocell= (-1.07+0.53)V\\=-0.54V[/tex]
F=96485 C/mol
n=2 mol
R=8.314 J.K-1.mol-1
T=298K
Substitute all these values in the above formula:
[tex]ln K_e_q=\frac{2mol* 96485 C/mol}{8.314 J.K^-^1.mol^-^1x298K} \\\\lnK_e_q=77.8\\K_e_q=e^7^7^.^8\\=>K_e_q=6.13x10^3^3[/tex]
Answer:
Keq=6.13x10^33
What enzyme below is an exoenzyme?
A. Casease
B. Citrase
C. Catalase
D. Oxidase
A sample of oxygen occupies 1.00 L. If the temperature remains constant, and the pressure on the oxygen is decreased to one third the original pressure, what is the new volume
Answer:
3.00 L
Explanation:
P₁V₁ = P₂V₂
V₁ = 1.00 L
P₁ = (x) atm
P₂ = [tex]\frac{1}{3}[/tex] · (P₁) = [tex]\frac{x}{3}[/tex]
V₂ = unknown
(x atm)(1.00 L) = ( [tex]\frac{x}{3}[/tex] atm)(V₂)
divide both sides by ( [tex]\frac{x}{3}[/tex] atm)
( 1.00x )( [tex]\frac{3}{x}[/tex] ) = V₂
x cancels out
(1.00)(3) = V₂
V₂ = 3.00 L
For each of the following compounds, indicate the pH at which 50% of the compound will be in a form that possesses a charge and at which pH more than 99% of the compound will be in a form that possesses a charge.
ClCH2COOH (pKa = 2.86)
CH3CH2NH+3 (pKa = 10.7)
Express your answer using two decimal places
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Answer:
a. 2..86 b. 4.86 c. 10.7 d. 8.7
Explanation:
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 2.86
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.
pH = pKa + log0.99x/0.01x
pH = pKa + log0.99/0.01
pH = 2.86 + log99
pH = 2.86 + 1.996
pH = 4.856
pH ≅ 4.86
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 10.7
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.
pH = pKa + log0.01x/0.99x
pH = pKa + log1/99
pH = 10.7 - log99
pH = 10.7 - 1.996
pH = 8.704
pH ≅ 8.7
