4.1 shows a plant cell. g For Examiner's Use n. C D Fig. 4.1 (i) Name the type of plant cell shown in Fig. 4.1. [1]
Answers
Answer:
palisade cell due to presence of chloroplasts
Related Questions
what is a measureing tape used for
Answers
Answer:
It is used to measure size or distance.
Answer:
it is used to measure long heights and distances and lengths,it is yellow and goes round
Explanation:
How much of a sample remains after five half-lives have occurred?
1/5 of the original sample
1/25 of the original sample
1/32 of the original gample
1/64 of the original sample
Answers
The first half-life, we have 1 • 1/2 = 1/2 left.
After two: 1/2 • 1/2 = 1/4
Three: 1/4 • 1/2 = 1/8
Four: 1/8 • 1/2 = 1/16
And five: 1/16 • 1/2 = 1/32.
Answer:
1/32
Explanation:
its not a question but i wanted to tell you guys that if you guyz like my answers then please don't forget to give like and follow at the same time. I am not forcing you to follow only if you guyz like my answer then like or follow. THANKS FOR READING..
Answers
Answer:
thank you for this oibnki
Answer:
Sure I'll go ahead and like your answers and follow you if that's what you wanted! :)
Explanation:
I. En un laboratorio se hizo reaccionar una disolución de ácido sulfúrico (H2SO4) con otra de hidróxido de sodio (NaOH), ambos acuosos. Para formar sulfato de sodio (Na2SO4) y 2 moléculas de agua (H2O) líquido. Completa en relación con la ecuación química que representa la reacción:
Answers
Answer:
In a laboratory, a solution of sulfuric acid (H2SO4) was reacted with another of sodium hydroxide (NaOH), both aqueous. To form sodium sulfate (Na2SO4) and 2 molecules of liquid water (H2O). Complete in relation to the chemical equation that represents the reaction:
Explanation:
The balanced chemical equation of the reaction is:
[tex]H_2SO_4(aq)+2NaOH(aq)-> Na_2SO_4(aq)+2H_2O(l)[/tex]
Thus, one mole of sulfuric acid reacts with two moles of sodium hydroxide.
What is nascent hydrogen?
Answers
Answer:
[H]
Explanation:
This is nascent hydrogen it's a reactive form of hydrogen...
It reduces elements and compounds.
what is the charge on ion X Li2X
Answers
In the compound Li2X, there are two lithium ions and one X^2- ion.
Ionic compounds are composed of an ion pair of opposite charge. Usually, the positive ion is a metal cation while the negative ion is a non metal anion. The two ions are held together by strong electrostatic interaction.
In the compound Li2X, there are two lithium ions and one X^2- ions. X^2 -is the non metal anion present.
Learn more: https://brainly.com/question/2673886
PLEASE HELPP!!!
PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.
Alkali metals generally become more / less dense going down the group.
The melting and boiling points of alkali metals increase / decrease down the group.
The softness of alkali metals increases / decreases going down the group.
The speed with which alkali metals react with oxygen increases / decreases going
down the group.
Answers
Answer:
vahshahhsjajaiaoakkakakaaosos
Plz Help I have One more time To retake and I can't fail it..
Answers
Answer:
B. Radar uses radio and the siren uses sound waves. both exhibit in the Doppler effect.
sorry if this is wrong
Combustion reactions typically involve all of the following except
a. The consumption of oxygen gas
b. The production of a Hydrocarbon
c. The production of water
d. The release of carbon dioxide
Answers
Answer:
b. The production of a HydrocarbonExplanation:
In Combustion reaction usually occurs when a hydrocarbon reacts with oxygen to produce carbon dioxide and water.
Element X and Y are two different elements that are placed in the same group in the Periodic Table of Elements. Which of the following statements is correct about their atoms?
A Atoms of element X and Y have same number of electrons
B Atoms of element X and Y have different number of protons
C Number of neutrons for atom X and Y changes during formation of an ion
D Nucleon number for atom X and Y is the total number of protons and electrons
Answers
Answer:
A Atoms of element X and Y have same number of electrons
The Clean Air Act legislation of 1970, 1977, and 1990 was designed to improve air quality in the United States by monitoring and reducing the emissions of air pollutants judged to pose threats to human health, such as carbon monoxide, nitrogen dioxide, sulfur dioxide, ozone, particulate matter, and lead. The main source of lead emissions in 1970 was the exhaust of vehicles burning gasoline to which tetra-ethyl lead had been added to improve combustion. By 1985, leaded gasoline was phased out of use, although airplanes and racecars were exempted. The 1990 amendments addressed the growing problem of urban smog by
Answers
Answer:
The 1990 amendments addressed the growing problem of urban smog by acid rain.
Explanation:
As shown in the above question, the Clean Air Act was created with the goal of making the US air healthier, while also aiming to reduce the impacts of pollution on the American population. This law had as its main objective to reduce the emission of gases capable of polluting the atmosphere, especially those resulting from the burning of gasoline in cars. In 1990, a new amendment was added to this law. This amendment aimed to reduce emissions of sulfur dioxide and nitrogen oxides, as they were the main cause of acid pollution, which was responsible for acid rain that is extremely dangerous and negative for society.
what do you mean by 1 joule work
Answers
Answer:
Joule is the SI unit of work. 1 Joule is amount of work done when a force of 1 Newton displaces a body through a distance of 1m in the direction of the force applied.
Which molecule will have the strongest LDF
Answers
Answer: Try to get answer in Explanation
Explanation: Kr has a greater number of polarizable electrons (36 electrons), so Kr would have a greater degree of LDFs and therefore a greater melting point than N 2 (which has 7 × 2 = 14 polarizable electrons).
A mixture of reactants and products for the reaction shown below is at equilibrium in a 5.0 L container what would most likely happen to the equilibrium if the volume of the container will reduced to 3.0 L?
Answers
Since the volume decreased, it means that the pressure is going to rise. Thus, the equilibrium of the reaction will shift in the direction that has the least amount of moles.
The statement, that describes the equilibrium "will change in the direction with the minimum moles."
What is an equilibrium?A condition of equilibrium has become one of balance. Chemical equilibrium is the state in which both the reactants and products are present in concentrations that have no further tendency to change with time, resulting in no observable change in the system's properties.
When volume decreases, the equilibrium shifts to favor the direction that produces fewer moles of gas. When the volume is raised, the equilibrium shifts in favor of the direction that produces the most moles of gas. Because the container's volume will be lowered from 5.0 L to 3.0 L, the pressure will rise. As a result, the equilibrium of the reaction will shift in the direction with the fewest moles. When the volume is reduced, the pressure rises. This demonstrates that a gas's pressure is inversely proportional to its volume.
Hence the correct answer is equilibrium will change in the direction with the minimum moles.
Learn more about equilibrium here
https://brainly.com/question/13463225
#SPJ2
When it’s summer in the northern hemisphere what Season is it in the Southern Hemisphere
Answers
Answer:
Winter
Explanation:
I dont know but whatev
Answer:
Winter
Explanation:
The seasonal cycle in the polar and temperate zones of one hemisphere is opposite to that of the other. Therefore, When it is summer in the Northern Hemisphere, it is winter in the Southern, and vice versa.
hope it helps :)
Calculate the molar mass of the following compound: Ca3P2
Answers
Answer:
The molar mass of the compound given is 182.182 g/mol.
Explanation:
To calculate the molar mass of the compound, we must multiply the number of moles of each element by the the individual molar mass of each element and add them together.
Let's start with Calcium. The molar mass of Calcium is 40.078. In this compound, we have three moles of Calcium, so we should multiply this number by 3.
40.078 g/mol * 3 mol = 120.234 g
Now, let's do the same for Phosphorus.
30.974 g/mol * 2 g/mol = 61.948 g
To find the molar mass of the entire compound, we should add these two values together.
120.234 g + 61.948 g = 182.182 g
Therefore, the correct answer is 182.182 g/mol.
Hope this helps!
What must scientists look for in their experiment or their data to make sure it is accurate?
Answers
Answer:
Scientists must look in their experiment/data to check for accuracy because they don't want to make any mistakes, and most importantly have to make sure they have the right information to proceed.
Explanation:
^
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 75 atm at
the same temperature? (5 points)
1) 1.0 L
0 2 2) 1.5 L
3) 2.0 L
O 4) 3.0L
Answers
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 7.5 atm at
the same temperature? (5 points)
1) 1.0 L
2) 1.5 L
3) 2.0 L
4) 3.0L
Answer:
2.0 L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Boyle's law
Boyle's law states that "the volume V of a given quantity of gas is inversely proportional to its pressure P as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Given the data in the question;
Initial Volume V₁ = 2.5LInitial pressure P₁ = 6.0atmFinal pressure P₂ = 7.5atmFinal volume V₂ = ?To determine the final volume of the gas, we substitute our given values into the expression above.
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = ( 6.0atm × 2.5L ) / 7.5atm
V₂ = 15Latm / 7.5atm
V₂ = 2.0L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Learn more about Boyle's law here: brainly.com/question/1437490
what is the organic molecule
Answers
Answer:
kinetic energy is the molecules
Explanation:
A molecule of the kind normally found in living systems. Organic molecules are usually composed of carbon atoms in rings or long chains, to which are attached other atoms of such elements as hydrogen, oxygen, and nitrogen.
How many liters of carbon dioxide can be “scrubbed”, or removed, with 3.45 Liters of 0.10 M of lithium hydroxide solution?
Answers
Answer:
The correct answer is - 3.864 L of CO2.
Explanation:
mention two factors which affect pressure due to liquid contained in a vessel
Answers
Answer:
depth of the liquid and nature of liquid affects the pressure due to liquid contained in a vessel
Answer:
Two factors influence the pressure of fluids. They are the depth of the fluid and its density. A fluid exerts more pressure at greater depths
Re-word this statement: Ionic Radii are changing as you move down the column because the atoms in lower rows have more energy levels, which makes the valence electrons farther from the nucleus, so it takes less energy for them to be pulled away.
The Ionic radii are changing as you move across a row because each element has one more proton, which increases the attraction of the nucleus.
Answers
Answer:
ty po hehe
Explanation:
mark me as brainliest po thank you
2.0 kilograms of lithium hydroxide can “scrub”, or remove, how many liters of carbon dioxide at standard conditions?
Answers
Answer:
0.94 L
Explanation:
The equation of the reaction is;
2LiOH + CO2 -----> Li2CO3 + H2O
Number of moles LiOH = 2.0/23.95 g/mol = 0.084 moles
2 moles of LiOH scrubs 22.4 L of CO2
0.084 moles of LiOH scrubs 0.084 moles × 22.4/2
= 0.94 L
If 3.5 kJ of energy are added to a 28.2 g sample of iron at 20 degrees C, what is the final temperature of the iron in kelvins?
Answers
295.8k
that is the procedure above
Suppose that three isotopes of element X occur in nature as follows:
The relative atomic mass of the naturally occurring mixture of element X is
Answers
Answer:
107.5 amu
Explanation:
isotopes: fractional Wt Avg
isotopes: isotopic mass %Abundance abundance (amu)
X110 110 60 0.60 66.0
X105 105 30 0.30 31.5
X100 100 10 0.10 10.0
∑ atm mass contributions = 107.5 amu*
*amu = atomic mass units
What happens to a glass of sugar solution when sugar is added to it?
The number of moles of water increases.
The number of moles of water decreases.
The molarity of the solution increases.
The molarity of the solution decreases.
Answers
When sugar is added to a glass of sugar solution, the molarity of the solution increases. Details about molarity can be found below, which is the third option.
What is molarity?Molarity is a term used to identify the amount of solute, in moles, dissolved in a solvent by volume. Molarity is expressed as moles per liter (mol/L).
However, molarity is directly proportional to the amount of solute in solution. This means that as the amount of solute increases, molarity also increases.
Therefore, when sugar is added to a glass of sugar solution, the molarity of the solution increases.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1
Plz Help I have One more time To retake and I can't fail it..
Answers
Answer:
D
Explanation:
A synthesis reaction is a reaction in which two or more reactants combine to form a given product.
If we look closely at option D, you will notice that sulphur and oxygen combined together to form sulphur dioxide. That is a typical example of chemical synthesis.
Hence;
S + O2 ----->SO2 is a synthesis reaction.
How many atoms of hydrogen are there in 36 g of NH4?
Answers
Answer:
hope it helps you
Explanation:
please like and mark me brainlist
Hope it helps!
Describe weighted average
Answers
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
Fe2O3 +3CO--2Fe+3CO2 .identify the substance oxidized ,reduced and oxidizing agent and reducing agent
Answers
Answer:
Oxidized : CO
Reduced: Fe
Oxidizing agent: Fe2O3
Reducing agent: CO
Explanation:
Loss of electrons is oxidation while gaining of electrons is reduction.
CO is a reducing agent, Fe2O3 is an oxidizing agent.
Each carbon atom is oxidized in CO. CO is the reducing agent
Each Fe atom in FeO3 is reduced. FeO3 is the oxidizing agent
