2.31 grams of KNO3 are dissolved in 4.15 g of H2O. What is the concentration of the solution in units of gKNO3/100gH2O?

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Answer:

Explanation: hell noo

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

Answer:

[tex]C_3H_7O_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to infer that the empirical formula of mannitol contains carbon, hydrogen and oxygen, so that the first step is to calculate the moles of C and H contained in the CO2 and H2O, respectively, as the only sources of these two elements in the formula:

[tex]n_C=1.993gCO_2*\frac{1molCO_2}{44.01gCO_2}*\frac{1molC}{1molCO_2} =0.0453molC\\\\n_H=0.9519gH_2O*\frac{1molH_2O}{18.02gH_2O}*\frac{2molH}{1molH_2O} =0.106molH[/tex]

Next, we calculate the grams and moles of O by subtracting the mass of C and H from the mass of the sample:

[tex]m_O=1.375g-0.0453molC*\frac{12gC}{1molC}-0.106molH*\frac{1.01gH}{1molH}=0.724gO\\\\n_O=0.724gO*\frac{1molO}{16.0gO} =0.0453molO[/tex]

Finally, we divide the moles of C, H and O by 0.0453 as the fewest moles of both C and O to find the mole ratios in the formula:

[tex]C:\frac{0.0453mol}{0.0453mol} =1\\\\H:\frac{0.106mol}{0.0453mol} =2.34\\\\O:\frac{0.0453mol}{0.0453mol} =1[/tex]

To get:

[tex]CH_{2.34}O[/tex]

Which must be multiplied by 3 to get whole numbers for all the subscripts, and therefore obtain:

[tex]C_3H_7O_3[/tex]

Regards!

Answer:

Explanation:

From the graphical diagram attached below; we can see the relationship between the concentration of [tex]H_2O_2[/tex] which declines exponentially in relation to the time and it obeys the equation: [tex]\mathtt{y = 0.9951 e^{-8\times 10^{-4}x}}[/tex]

This relates to the 1st order reaction rate, whereby:

The integrated rate law[tex]\mathtt{ [A] = [A]_o e^{-kt}}[/tex]

here:

[A] = reactant concentration at time (t)

[A]_o = initial concentration for the reactant

k = rate constant

As such, the order of the reaction is the first order

Rate constant [tex]\mathtt{k = 8\times 10^{-4} {s^{-1}}}[/tex]

Rate law [tex]\mathtt{= k[H_2O_2]}[/tex]

The integrated rate law [tex]\mathtt{[H_2O_2] = [H_2O_2]_oe^{-(8*10^{-4})t}}[/tex]

From the given table:

the initial concentration of [tex]H_2O_2[/tex] = 1.00 M

∴

We can determine the concentration of the reactant at 4000s by using the formula:

[tex]\mathtt{[H_2O_2] = [H_2O_2]_oe^{-8*10^{-4}(t)}}[/tex]

[tex]\mathtt{[H_2O_2] = (1.00\ M)*e^{-8*10^{-4}(4000)\ s}}[/tex]

[tex]\mathtt{[H_2O_2] =0.0407 \ M}[/tex]

Finally, at 4000s: the average rate is:

[tex]\mathtt{= (8*10^{-4} \ s^{-1})(4000 \ s) }\\ \\ \mathtt{ = 3.256 \times 10^{-5} \ M/s}[/tex]

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer:

Explanation:

Hope this helps

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

Answer: In order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Explanation:

More is the concentration of reactant molecules more will be the number of collisions between their molecules. As a result, more readily the products will be formed.

Hence, for the given reaction when concentration of HCl is increased then there will be increase in the number of collisions between reactants.

Thus, we can conclude that in order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Answer:

solo I

Explanation:

Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.

Answer:

2.35 × 10²² particles

Explanation:

To get the number of particles in a substance, we multiply the number of moles (n) of that substance by Avogadro's number (nA).

That is, we say;

number of atoms = n × 6.02 × 10²³

In this question, Neon gas is said to have 0.0391 moles. The number of atoms in that field.

number of particles = 0.0391 × 6.02 × 10²³

number of particles = 0.235 × 10²³

number of particles = 2.35 × 10²² particles

Answer: el texto no es tan claro

Answer:

Volume of the reaction vessel is increased - shift to the left

The reaction is cooled down - shift to the right

H2 is added to the system - shift to the right

The pressure of the system is decreased - shift to the left

A catalyst is added to the system - no change

Water is removed from the system - shift to the right

Explanation:

When a constraint such as a change in temperature, pressure or volume is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.

When the volume of a reaction system is increased, the equilibrium position shifts in the direction in which there is the highest total volume. This is the left hand side.

Since the reaction is exothermic (heat is given out) when the reaction is cooled down, the forward reaction is favoured.

Adding of reactants shifts the equilibrium position to the right hand side hence when H2 is added, the equilibrium position shifts to the right.

Decreasing the pressure shifts the equilibrium position to the direction of higher total volume hence the equilibrium shifts to the left when pressure is decreased.

A catalyst has no effect on the equilibrium position. It increases the rate of forward and reverse reaction to the same extent hence the equilibrium position is unaffected.

Removal of water from the system increases the rate of forward reaction since a product is being removed from the reaction system.

Answer:

4

Explanation:

because it has 3 carbons  and 6 hydrogen

hope this helps :)

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration:

Answer:

Light can be treated like particles because it is made of chunks like things called protons.

Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.

HOPE IT HELPS❤️

Answer:

The equation for the precipitation reaction of cobalt (ii) hydroxide is given below:

CoSO₄ (aq) + NaOH (aq) ----> Co(OH)₂ (s) + Na₂SO₄ (aq)

Explanation:

Cobalt (ii) hydroxide is an inorganic compound consisting of cobalt (ii) ions, Co²+ and hydroxide ions, OH-. It is insoluble in water and the pure form known as the beta form is a pink-coloured solid. The impure form which incorporates other anions in its molecular structure is blue in colour and is ustable.

Cobalt (ii) hydroxide is formed as precipitate when an alkaline metallic hydroxide such as sodium hydroxide is mixed with an aqueous cobalt (ii) salt such as cobalt (ii) sulfate. The equation for the precipitation reaction of cobalt (ii) hydroxide is given below:

CoSO₄ (aq) + NaOH (aq) ----> Co(OH)₂ (s) + Na₂SO₄ (aq)

Being a basic hydroxide, cobalt (ii) hydroxide neutralizes acids to form cobalt (ii) salts and water. For example: Co(OH)₂ (s) + H₂SO₄ (aq) ---> CoSO₄ (aq) + H₂O

Thus, cobalt (ii) hydroxide is soluble in acids.

Cobalt(II) hydroxide is used mostly as a drying agent for paints, varnishes, and inks. It is also useful in the preparation of other cobalt compounds.

Answer:

A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords.

HEY. HOPE THIS HELPS♡

Equilibrium shifts to the right.

OPTION A

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S

Answer:

I don't no answer sorry

Explanation:

you follow me

Answer:

Chromosomes and I think its too many

Explanation:

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Answer:

B. The movement of weathered materials by wind, water or ice.

Answer:

5–bromo–9–chlorodecane

Explanation:

To name the compound given above, the following must be obtained:

1. The longest continuous carbon chain. This gives the parent name of the compound.

2. The substituent group attached to the compound.

3. Position of the substituent group.

4. Combine the above to obtain the name.

Now, we shall determine the name of the compound as follow:

1. The longest continuous carbon chain is 10. Thus, the parent name of the compound is decane.

2. The substituent groups attached to the compound are:

I. Bromine (Br) => Bromo

II. Chlorine (Cl) => Chloro

3. The position of the substituent groups are:

I. Br => carbon 5

II. Cl => carbon 9

NOTE: numbering is done alphabetically.

4. Therefore, the name of the compound is:

5–bromo–9–chlorodecane

Answer:

A.

Explanation:

I chose this answer and it was correct ‍♀️

Explanation:

Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence

Answer:

ethyl ethanoate and water

Explanation:

At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.  

Ethyl liquor and water are two miscible fluids.   Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.

The answer is ethyl ethanoate and water. Hope this helps you!