We know that,
4.6 x $ \sf{10^{22}}$ atoms of an element weigh 13.8g.Thus,
The atoms of $ \sf{ 6.02 \times 10^{13}}$ will weigh;
[tex] = \sf{\frac{13.8 \times 6.02 \times {10}^{23} }{4.6 \times {10}^{22} } } \\ [/tex]
[tex] = \sf{180.6 \: g \: \: (molar \: mass)}[/tex]
Hence, the molar mass (atomic mass) will be 180.6 g.What is the density of ammonia (NH3) at 273 K and 1.00 atm?
A - 0.7601 g/L
B - 0.982 g/L
C - 1.23 g/L
D - 2.43 g/L
Answer:
0.7602 g/L
Explanation:
We'll begin by calculating the molar mass of NH₃. This can be obtained as follow:
Molar mass of NH₃ = 14.01 + (3×1.01)
= 14.01 + 3.03
= 17.04 g/mol
Finally, we shall determine the density of ammonia, NH₃. This can be obtained as follow:
Temperature (T) = 273 K
Pressure (P) = 1 atm
Molar mass of NH₃ (M) = 17.04 g/mol
Gas constant (R) = 0.0821 atm.L/Kmol
Density (D) =?
D = PM / RT
D = (1 × 17.04) / (0.0821 × 273)
D = 17.04 / 22.4133
D = 0.7602 g/L
Answer:
It is A
Explanation:
A piece of unknown metal with mass 68.6 g is heated to an initial temperature of 100 °C and dropped into 8.4 g of water (with an initial temperature of 20 °C) in a calorimeter. The final temperature of the system is 52.1°C. The specific heat of water is 4.184 J/g*⁰C. What is the specific heat of the metal?
0.171
0.343
1.717
3.433
Answer:
1.717
Explanation:
Làm thế nào để tắt mỗi chất ra khỏi hỗn hợp gồm bột nhôm bột sắt và bột gỗ?
Answer:
Dùng nam chân hút đc bột sắt ra khỏi hỗn hợp
Bột gỗ và bột nhôm thì bột gỗ tan trong nước còn bột nhôm thì không
Explanation:
Nice !Am I correct?
(Plz don’t used this for points or typing random things…plz don’t)
Answer and Explanation:
The answers would be:
A. Domestic cats live in about 34% of homes in the United States. (Statistical statements are, most of the time, facts and not an opinion)
C. Modern domestic cats are closely related to Near Eastern wildcats. (Fact)
D. Cats eat rodents that can spread disease. (Fact)
The above statements are facts because they don't make a judgement or show a position on the topic, only show what is known and proven to be true.
B and E are incorrect because they take a side of the topic, in which someone else might disagree with the opinion. These opinions aren't proven to be true.
#teamtrees #PAW (Plant And Water)
I hope this helps!
10. Fuel oil, gasoline, kerosene and naphtha are four fractions obtained from the fractional
distillation of petroleum.
What is the order of the boiling points of these fractions?
Answer:
option b
Explanation:
answer from gauth math
Which of the following should NOT be used to hold chemicals while they are being heated?
Question 5 options:
test tube
weigh boat
beaker
crucible
Answer: Weigh boat
Explanation:
they are disposable and will likely melt
Weigh boat among the following should not be used to hold chemicals while they are being heated ,therefore option (b) is correct.
What do you mean by weigh boats ?Weigh boats are ideal for general-purpose weighing, evaporating, dispensing, and storing applications. Compatible with balances and dryers, these pans support precise measurements.
A weigh boat is an open container often used in chemistry and bio chemistry. It is used if you want to weigh a sample very accurately.
A weigh boat is an object that is used to protect your balance from any object you want to weigh.
Weigh boat among the following should not be used to hold chemicals while they are being heated ,hence option (b) is correct.
Learn more about weigh boats ,here:
https://brainly.com/question/14555250
#SPJ2
A student conducts an experiment to determine how the temperature of water affects the time for sugar to dissolve. In each trial, the student uses a different amount of water and a different temperature of water. What is wrong with this experimental design? A.The student changed more than one independent variable. B.The student did not change enough independent variables. C.The student needs to perform more trials. D.The student does not have a dependent variable.
What is wrong with the experimental design is that the student changed more than one independent variable.
WHAT AN EXPERIMENT SHOULD CONTAIN?
An experiment is a procedural method of solving a scientific problem or answering a scientific question. An ideal experiment should contain two variables namely: independent variable and dependent variable. Dependent variable: This is the variable that the experimenter measures in the experiment. The dependent variable responds to changes made to the independent variable. Independent variable: This is the variable that is manipulated in an experiment in order to bring about a response.In the experiment conducted by the student in this question in order to determine how the temperature of water affects the time for sugar to dissolve. The independent variable is the DIFFERENT TEMPERATURE OF WATER while the dependent variable is the TIME TAKEN FOR SUGAR TO DISSOLVE.
N.B: An experiment should have only one independent variable and all other variables should be kept constant. This is to have a reliable result.
However, this student used two independent variables (temperature and amount of water) for the experiment, which is wrong for the experimental design.Therefore, the fact that the student changed more than one independent variable is wrong for the experimental design.
Learn more: https://brainly.com/question/967776
Answer:
The student changed too many variables.
Explanation:
in k-12 took the quiz
would Nitrogen Dioxide be ionic or covalent
Explanation:
The nitrogen dioxide is a covalent compound where one nitrogen is the central atom which is bonded to two oxygen atoms, where one oxygen atom is bonded by a single bond and other oxygen atom by a double bond.
Answer: colavent
Explanation:
Define symbol and compound with an exomple.
to make 400 gram solution with a mass by a mass concentration of 6 % how much salt and water you need to mix
Answer:
[tex]400 \div 6 \\ \\ [/tex]
What are the top three sources of US electricity generation?
The three major categories of energy for electricity generation are fossil fuels (coal, natural gas, and petroleum), nuclear energy, and renewable energy sources.
Volume = 90g / 3g cm3 What is the volume help ASAP
Answer:
The answer will be this 30g/cm3
Type the correct answer in the box. Express your answer to two significant figures. You are performing a reaction with 1.7 moles of hydroiodic acid and 3.43 moles of zinc bromide: 2HI + ZnBr2 → 2HBr + ZnI2. How many moles of zinc iodide can be made? The theoretical yield is moles of zinc iodide.
Answer:
1.34 34343 he did
Explanation:
i did the test
Answer:
0.85
Explanation:
iron filings react with sulphuric acid to produce hydrogen and iron(II) sulphate
Answer:
is this true and false? then its true
Explanation:
Answer:
Fe(s) + H2SO4 (aq) ---> FeSO4 (s) + H2 (g)
Explanation:
How many moles are there in 2.3 x 1024 atoms of
sulfur?
Explanation:
The steps given in the question are incorrect.
Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).
Step 1
Use dimensional analysis to convert the number of atoms to moles.
1 mole atoms = 6.022 × 10²³ atoms
n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag
Step 2
Convert the moles of Ag to mass.
mass (m) = moles (n) × molar mass (M)
n(Ag) = 3.8193 mol Ag
M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag
m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures
The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.
Answer:
[tex]\boxed {\boxed {\sf 3.8 \ moles \ of \ sulfur}}[/tex]
Explanation:
We are asked to convert a number of atoms to moles.
We can convert atoms to moles using Avogadro's Number, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of sulfur. There are 6.022 ×10²³ atoms of sulfur in 1 mole of sulfur.
We use dimensional analysis to convert atoms to moles. This involves setting up ratios. Use Avogadro's Number and the underlined information to make a ratio.
[tex]\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
We are converting 2.3 ×10²⁴ atoms of sulfur to moles, so we multiply by this value.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
Flip the ratio. It is equivalent, but it allows the units of atoms of sulfur to cancel.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {1 \ mol \ S}{6.022 \times 10^{23} \ atoms \ S}[/tex]
[tex]2.3 \times 10^{24} *\frac {1 \ mol \ S}{6.022 \times 10^{23} }[/tex]
[tex]\frac {2.3 \times 10^{24} }{6.022 \times 10^{23} } \ mol \ S[/tex]
[tex]3.819329127 \ mol \ S[/tex]
The original measurement of atoms (2.3 ×10²⁴) has 2 significant figures, so our answer must have the same. For the number we calculated that is the tenths place. The 1 in the hundredths place to the right (3.819329127) tells us to leave the 8 in the tenths place (3.819329127).
[tex]3.8 \ mol \ S[/tex]
2.3 ×10²⁴ atoms of sulfur is equal to approximately 3.8 moles of sulfur.
why is the Dna molecule able to open up and close?
Answer:
The breaking of the hydrogen bonds due to the force relieves the torsional stress stored in a double helix. As a result, the nucleotide strands rotate more freely about the axis of a helix and start unwinding. ... The DNA unzipping and the DNA unwinding result in a structural transformation from dsDNA to ssDNA.
A place where animals are protected in their natural habitat is called ------------------
answer is wildlife sanctuary
Answer:
a wildlife sanctuary
Explanation:
if any 1 studying 11th can u plz send me the chemistry notes for chapter 2 STRUCTURE OF AN ATOM lesson
plz send me honestly cause i have exam day after tommorow .so plz send unwanted answer
I BEG U
Answer:
What
You cant just send notes you also have to say where you are and which book you are using because others are different
How many joules of energy are required to melt 125 g of water?
Answer for this question is 45,000
Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one form to another and then use it to accomplish tasks, making modern civilization possible.
Explain about the energy?Energy is the ability to do tasks. It can exist in various forms, including potential, kinetic, thermal, electrical, chemical, and nuclear.
Energy can take on a variety of shapes. Examples of these include: electrical energy, sound energy, chemical energy, nuclear or atomic energy, light energy, heat energy, mechanical energy, gravitational energy, and so on. Each form has the ability to shift or transform into the others.
The sun is one of the most significant energy sources. Most of the energy on earth comes from the sun, which is where it all began. We get
Answer for this question is 45,000
To learn more about energy refer to:
https://brainly.com/question/13881533
#SPJ2
As the mass of the nucleus increases, what happens to the ratio of neutrons to protons in stable isotopes? A. The neutron:proton ratio decreases. B. The neutron:proton ratio increases. C. The neutron:proton ratio remains 1:1. D. The neutron:proton ratio remains 1.5:1.
Unknown # 21
Flame Test Color: Lilac
Addition of HCl(aq)= NR (No Reaction)
Addition of HCl(aq) and BaCl2(aq)= White precipitate
Addition of HNO3(aq) and AgNO3(aq)= NR (No Reaction)
What is the unknown ionic compund molecular formula?
Is it possible to prepare chlorine in lab without application of heat?
Answer:
i think it will explode
Which option explains why this amino acid can act
both an acid and a base?
(1 point)
It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can
increase acidity, while the carboxyl group can decrease acidity
It contains both an amino functional group and a methyl functional group. In a solution, the amino group can
increase acidity, while the methyl group can decrease acidity
It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can
decrease acidity, while the carboxyl group can increase acidity
It contains both an amino functional group and a methyl functional group. In a solution, the amino group can
decrease acidity, while the methyl group can increase acidity
The correct answer is: It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can
decrease acidity, while the carboxyl group can increase acidity.
The carboxyl functional group is acidic while the amine group is basic.
In an amino acid, there are two functional groups;
The amine groupThe carboxyl groupThe carboxyl functional group is acidic because it contains a replaceable or ionizable hydrogen ion. The amine group on the other hand is capable of accepting a proton hence it is basic.
Therefore, In a solution, the amine group can decrease acidity, while the carboxyl group can increase acidity.
https://brainly.com/question/15823799
Identify the correct mole ratio for each substance.
Sodium chloride (NaCl)
Na:Cl = 1: _
Ammonium nitrate(NH.NO3)
H:0 = 4: _
Answer:
The mole ratio of H : O in ammonium nitrate is 4 : 3.
Explanation:
We are given a compound named ammonium nitrate having formula
There are 3 elements in this compound which are nitrogen, hydrogen and oxygen.
To calculate the mole ratio, we write the ratio of their subscripts. For this compound,
Which of the following results in a decrease in the entropy?
Heating ice
Increasing mass
Cooling a liquid
Dissolving salt in water
Answer:
cooling a liquid
Explanation:
Temperature is lowered and the energy of molecules, and therefore number of available configuration , is lowered
The thermal energy present in the system for the product formation is entropy. Cooling a liquid can decrease the entropy of the thermodynamic system. Thus, option C is correct.
What is entropy?Entropy is the energy and the heat present in the reactant of the thermodynamic system that is associated with the randomness and disorder of the particle matter in the reaction system.
Entropy is dependent on factors like dissolution, temperature, randomness, kinetic energy, etc. The entropy increases with an increase in the dissolution and tempearture.
The process of cooling liquid lowers the temperature which in turn decreases the kinetic energy and randomness of the molecules and at last, the entropy decreases.
Therefore, the cooling of the liquid decreases the entropy.
Learn more about entropy here:
https://brainly.com/question/28081833
#SPJ5
Jane wants to study how a person's heart and lungs respond to intense
exercise. She measures the heart rate and breathing rate of 10 people before,
during, and after a 5K race. Which body systems is she studying?
A. Cardiovascular and respiratory
B. Skeletal and urinary
C. Digestive and nervous
D. Muscular and reproductive
SUBMIT
3. Determine the pH value for calcium hydroxide, Ca(OH), with concentration of
0.05 mol dm3. [pH + pOH = 14).
Explanation:
Ca(OH) is a base
pOH = -Log[OH]
[OH] = 0.05
pOH = -Log(0.05)
pOH = 1.3
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 2
pH = 12.7
Which statement best describes the destiny of an atoms nucleus?
Answer:
The answer would be: An atom’s nucleus occupies very little of the atom’s volume but contains most of its mass
Explanation:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.
Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.
Refer to https://en.wikipedia.org/wiki/Atomic_nucleus for further understanding
Which of the following would not be considered matter?
clouds
trees
rain
air
light
Answer:
light
Explanation:
Have a nice day
Answer:
light
Explanation:
Which is the best term to use when describing the energy of motion? chemical kinetic potential thermal
Answer:
Kinetic energy
Explanation:
Kinetic energy is the energy associated with an object's motion. It is mass and velocity dependent by a directly proportional relationship.
Potential energy is the energy associated with an object's position.
Thermal energy is the energy associated with heat addition or withdrawal.
Kinetic energy is the energy that a body possesses because of its movement, that is, it is the energy that arises when objects are in motion.
What is kinetic energy?It is that energy that a body or system possesses due to its movement.The amount of work done by all the forces acting on a body with a given mass, depends on the said mass and the speed of the body.Therefore, we can conclude that kinetic energy is the energy produced by its movements that depends on its mass and speed.
Learn more about kinetic energy here: brainly.com/question/999862
