What is the equation to calculate the volume of a cylinder?
O V = (77/4)*72 +h
O V=1* w* h
O V = (4/3)*r
O V = m*d2
Answer:
the equation for cylinders is V = (pi)r2h
none of these are even close but i can do a little more research
sorry if this one wasnt as much help
The strength of van der Waals forces increases as:
A. molecular size decreases
B. molecular size increases
C. number of electrons increases
D. number of electrons decreases
Answer:
B and C
Explanation:
is it multiple choice question??
Van der Waals forces are the interaction between the molecules and the atoms. It increases with an increase in the molecular size and the number of electrons. Thus, options B and C are correct.
What are Van der Waals force?
Van der Waals forces are the weak forces of attraction and repulsion present between the atoms and the molecules of the compounds. They are also called London Dispersion Forces and dipole-dipole forces.
An increase in the number of electrons and size of the molecule increases the surface area and the electron cloud which in turn, increases the Van der Waals force.
The intermolecular force increases as in large atoms or molecules the valence are held loosely as they are far from the nucleus or the center of the atom.
Therefore, the size and the electron increase the Van der Waals force.
Learn more about Van der Waals force here:
https://brainly.com/question/11457190
#SPJ5
literally anyone pls
Answer:
0.5851 g/cm3
Explanation:
(45.62) ÷ (4.272)³ = 0.5851
Calculate the no. of moles in 25gm of calcium phosphate
Plz Fast Urgent
Answer:
0.162 mol
Explanation:
n=m/M
M= 20*3 + 15*2 + 8*4*2
M=154 g/mol
n=25g/154g/mol
n=0.162 mol
The number of moles in 25 grams of calcium phosphate is 0.162 mol.
What are moles?Mole is a SI unit that is used to measure the quantity of any substance in a specific amount. To calculate the moles, we will divide the mass of the substance by the molar mass of that substance.
n = m/M
Calcium phosphate is a chemical compound that contains calcium and phosphorus or phosphoric acid, and it is used to treat the low calcium in the body and thyroid and parathyroid.
The molar mass of calcium sulfate is 154 g/mol
The mass of calcium sulfate is 25 grams
Putting the value in the equation
n = m/M
n = 25g / 154 g/mol = 0.162 mol
Thus, the moles of calcium sulfate are 0.162 mol.
Learn more about moles, here:
https://brainly.com/question/26416088
#SPJ5
Drag the appropriate answer to the correct location on the concept map below.
The phenomenon where an electric current is produced by shining a light on a metal plate is called the ________ effect. The minimum frequency required to cause to flow is called the ________ frequency. This frequency depends on the identity of the metal used.
Answer:
Photoelectric, Threshold
Explanation:
Your welcome
Help me with this easy chemical change question!!!!
Answer:
1, just I) color.
Physical properties are the properties that can be observed without changing the composition of a substance, such as color, temperature, density, and boiling point.
A physical change is a change in the substance that only modifies its aggregation state, such as solidification, and boiling.
Chemical properties are the properties that need a reaction to being observed, such as combustibility, which needs a combustion reaction to being quantified.
When a chemical reaction occurs, and the composition of the substance change, it's a chemical change.
So, heating copper with carbon is a chemical reaction, and purification by electrolysis is too. Color is the only physical property.
difference between Ammonia and ammonium..
plz do not scam
Which of the following is NOT a pure substance?
а.
b.
C.
d.
Answer:
lol where is your questions??
Which is larger?
1). 1 liter or 1500 milliliters
2) 12 cm or 12 milliliters
Answer:
1). 1 litre
2).12 cm
Explanation:
In 1 litre = 1000 ml whereas 1500 milliliters equals 0.15 litres and it is same for 12 cm and 12 milliliters
MAY SOMEONE HELP ME PLZZ
A tire company wants to determine what kind of rubber will last the longest for their tires. What are some variables that the researchers will want to make controlled variables?
Answer: Rubber source, temperature, thinkness, thread design, driving pattenrs, weather, etc.
Explanation: There are many variables. Here are a few I would include in a tire lifetime study:
1. Type of rubber, including source
2. Thickness of tire
3. Design of tire thread
4. Life as a function of average speed and road surface
5. Expected outside temperature and wet conditions
6. Driving conditions of speed and both acceleration and deceleration parameters (e.g., tire life when slamming on the brakes or accelerating quickly)
How is the atomic mass of an element determined?
A. by adding the masses of the protons and electrons
B. by adding the masses of the neutrons and electrons
C. by determining the number of protons
D. by adding the masses of the protons, neutrons, and electrons
Answer:
D
Explanation:
Atomic mass is the total mass of protons, neutrons and electrons of an atom at rest
3. Take vinegar, lemon juice, tap water in three separate glass beakers. Put chalk piece,pin, egg shell, leaves in three beakers. Note your observations how test the gas evolved in it.
Answer:
This process is know as Chromotography
Explanation:
A. Identify the type of molecule shown in the drawing. (2 points)
Answer: 1) Caboxylic acid
2) Ether
3) Ester
4) Aldehyde
5) Amine
6) Alcohol
Explanation: The type of a molecule is based it's primary functional group.
https://en.wikipedia.org/wiki/Functional_group
The identities of the given molecules shown in the drawing are:
1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
What are the organic compounds?Organic compounds are those compounds, which contain carbon-carbon and carbon-hydrogen bonds.
The five organic compounds are lipids, carbohydrates, protein, nucleotide, etc.
Thus, the correct option is 1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
Learn more about organic compounds
https://brainly.com/question/5994723
#SPJ2
In the circular flow diagram, what do firms provide to product markets?(1 point)
Answer:
Firms produce goods and services,which they sell to households in return for revenue.
Answer: Goods and Services
Explanation:
GIVING 20 POINTS!! Apply Concepts Two chemists each plan an investigation in which they will combine hydrogen gas with chlorine gas to observe the chemical reactivity. The plans differ in that one will use 25 milligrams each of hydrogen and chlorine, and the other will use 1000 times this amount, i.e., 25 grams each of hydrogen and chlorine. Can the investigations reach similar conclusions about the reactivity of hydrogen with chlorine? Explain.
Answer:
Yes, the investigations will reach similar conclusions about the reactivity of H2 and Cl2
Explanation:
1. The law of multiple proportions says that when elements form compounds, the proportions of the elements in those chemical compounds can be expressed in small whole number ratios. This means that regardless of whether 1000 times more of the products are used, the reactivity of the products is established by the chemical reaction
2. The law of multiple proportions is an extension of the law of definite composition, which states that compounds will consist of defined ratios of elements.
3. A reaction with more reactants will need more care because more products are produced, which can be toxic
4. H2 and Cl2 reactivity does not depend on the quantities but the chemical properties of each compound
measure 25 mL of water in a 50 mL graduated cylinder. pour the 25 mL of water into the 250 mL beaker and record the mass of the beaker + water. Now find the mass of just the water.
Answer:
so i think mass of water is 235 ml
Is it possible to prove that something is real or true of you can’t directly observe it? If no, why not? If yes, how would you do that?
How are elements arranged on the periodic table?
a. they are arranged to highlight similarities between elements
b. they are arranged to highlight different elements with similar isotopes
c. they are arranged in order from most abundant to very rare and unstable
d. they are arranged in order of the date of discovery
Answer:
the elements are listed in order of increasing atomic number. The atomic number is the number of protons in the nucleus of an atom.In a periodic table arranged in order of increasing atomic number, elements having similar chemical properties naturally line up in the same column.
The elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
How elements are arranged on the periodic table?The elements on the periodic table are basically arranged on the basis of increasing their atomic number. These atomic number is represented by the number of protons in the nucleus of an element.
According to the question, the elements possessing identical chemical properties are arranged in the same group. For example, group 17 is known as the halogen group. Among this group, the elements bear one electron short to fulfill their octet.
The whole periodic table comprises of 18 groups and 7 periods.
Therefore, the elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
To learn more about the Periodic table, refer to the link:
https://brainly.com/question/15987580
#SPJ2
• 3. Using the following formula Force (N) = mass (kg) x acceleration
(m/s). How is the force of a 50kg being drops at 2m/s^2
o
Explanation:
Hope it helps.
Thank you
What does a virus inject into a cell?
Answer:
The virus's genome is uncoated from the protein and injected into the host cell.
Explanation:
Cuales son los elementos (de la tabla periodica) que contienen los seres inertes (minerales)
Osea por ejemplo las piedras, el agua, la tierra, cuales son los elementos del universo que conforman cosas no-vivas?
What is the density of a piece of metal with a
mass of 23.5 g and a volume of 11.1 mL? You
will report in units of g/mL. Please answer only
with a number. Include only two decimals in
your answer.
The density of the piece of metal is 2.12g/mL
HOW TO CALCULATE DENSITY:
Density, which refers to the mass of an object in relation to its volume, can be calculated by dividing mass by volume. That is;Density (g/mL) = mass (g) ÷ volume (mL)
According to this question, a piece of metal has a mass of 23.5 g and a volume of 11.1 mL, hence, the density can be calculated as follows:Density = 23.5/11.1
Density = 2.12g/mL
Learn more: https://brainly.com/question/2040396
PLS HELP. DUE TODAY.
1. T or F? All protons in an element contain an identical number of neutrons.
2. An atom with a _____ charge has the same number of protons and electrons.
Answer:
1. falseno all protons in an element doesn't contain an identical number of neutrons . number of electrons and number of protons contain identical number but the number of neutrons may vary. for eg: protons and neutrons of hydrogen is 1 and 0 respectively whereas protons and neutrons of helium is 2 and 2 .
2.neutral chargeWould you categorize temperature as an Intensive or extensive property explain plz !!!
Extensive properties depend on the amount of matter in a sample, While Intensive properties do not depend on the amount of matter in a substance.
~What should a prepositional phrase include after the preposition?
A.a noun and its modifiers
B.an adjective and an adverb
C.a subject and a predicate
D.an object and its modifiers
Answer:
B
Explanation:
A prepositional phrase should include after the preposition an object and its modifiers. The correct option is D.
What are prepositional phrases?A prepositional phrase is a group of words that contain a preposition with its object and the words that modify it. These are the words that change verbs and nouns.
For example, Mansi is going out with handsome Brian. Brian is the object and the beautiful is the prepositional phrase. The three types of prepositional phrases are:
Adverb prepositional phrases.Adjective prepositional phrases.Prepositional phrases, behave as nouns.If there are two prepositional phrases used in one sentence. The other prepositional phrase will be used as an adverb.
Thus, the correct option is D. an object and its modifiers.
To learn more about prepositional phrases, refer to the link:
https://brainly.com/question/17542837
#SPJ6
what will happen to the atoms or sbstance when it is condenses
Answer:
Hey mate.....
Explanation:
This is ur answer.....
Condensation happens when molecules in a gas cool down. As the molecules lose heat, they lose energy and slow down. They move closer to other gas molecules. Finally these molecules collect together to form a liquid.
Hope it helps!
Brainliest pls!
Follow me! :)
How do double replacement reactions relate to Combustion reactions
Explanation:
A single-replacement reaction replaces one element for another in a compound.
A double-replacement reaction exchanges the cations (or the anions) of two ionic compounds.
A precipitation reaction is a double-replacement reaction in which one product is a solid precipitate.
Solubility rules are used to predict whether some double-replacement reactions will occur.
As a professor Daniel must complete a research project each year in order to
stay on staff. Daniel is an engineer and has to deal with many complicated
mathematical calculations. Knowing this fact Daniel would most likely concern
himself with qualitative research,
Explanation:
Add our site sources in order to be advantage of knowledge
Which describes a relationship when calculating the energy of a photon? The energy of the photon is directly proportional to frequency. The energy of the photon is inversely proportional to frequency. As the energy of the photon increases, Planck’s constant increases. As the energy of the photon increases, Planck’s constant decreases.
Answer:
The photon is directly proportional to frquency
Explanation:
E=hf
where E is energy
h is plancks constant and
f is frequency
Answer:
A
Explanation:
Edge 2022
