You have recently been called to troubleshoot network connectivity problems at a user's workstation. You have found that the network cable runs across high-traffic areas on the floor, causing the cable to wear through and break. You have replaced the cable with a plenum-rated and shielded twisted pair cable. You would like to minimize the problem and prevent it from happening again.Which of the following will BEST protect the cable from further damage?A. Encase the cable in a protective shield and secure the cable to prevent it from slipping.B. Periodically check the cable for kinks and wear. Replace the cable when necessary.C. Run the cable through the ceiling area instead of across the floor.D. Run the cable under the carpet.

Answer:

The beta decay takes place.

Explanation:

The reaction of radioactivity of carbon 14 to nitrogen 14 is

There is a beta decay.  

The reaction is

[tex]C_{6}^{14}\rightarrow N_{7}^{14}+\beta _{-1}^{0}+ energy[/tex]

Here some energy is released in form of neutrino.

Answer:

Velocity = distance / time

V = 10/1

V = 10km/h

Answer:10km/h or 2.77m/s.

Explanation:

Distance =10km

Time =1h

Velocity =10/1 =10km/h

Or,

Distance =10km =10000m

Time =1h =60min = 3600s

Velocity =10000/3600 =2.77m/s

Answer:

Option C. 20 V

Explanation:

We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:

Resistor 1 (R₁) = 20 Ω

Resistor 2 (R₂) = 40 Ω

Resistor 3 (R₃) = 60 Ω

Equivalent Resistance (R) =?

R = R₁ + R₂ + R₃ (series arrangement)

R = 20 + 40 + 60

R = 120 Ω

Next, we shall determine the current in the circuit. This can be obtained as follow:

Voltage (V) = 60 V

Equivalent Resistance (R) = 120 Ω

Current (I) =?

V = IR

60 = I × 120

Divide both side by 120

I = 60 / 120

I = 0.5 A

Finally, we shall determine the potential drop across R₂. This can be obtained as follow:

Current (I) = 0.5 A

Resistor 2 (R₂) = 40 Ω

Voltage (V) =?

V = IR₂

V = 0.5 × 40

V = 20 V

Therefore, the potential drop across R₂ is 20 V

Answer:

Workdone = 19600 Nm

Explanation:

Given the following data;

Mass = 40 kg

Distance = 50 meters

We know that acceleration due to gravity is equal to 9.8 m/s².

To find the work done;

First of all, we would determine the force being exerted by the construction worker.

Force = mass * acceleration due to gravity

Force = 40 * 9.8

Force = 392 Newton

Next, we would determine the work done;

Workdone is given by the formula;

[tex] Workdone = force * distance[/tex]

[tex] Workdone = 392 * 50 [/tex]

Workdone = 19600 Nm

Answer:

Option C

Explanation:

Diverging lens are negative lens as they have negative focal length. Their

magnification is smaller than one.

They produce virtual image in which the refracted rays extended back in order to meet

Hence, option C is correct

Answer:he is correct

Explanation: when Donald runs all his weight is moving at the same speed so when all that weight hits a stopped object the weight will transfer its force into that object Kinda like how a truck hits a car

Answer:

a)  [tex]m_v= 56.16 Kg[/tex]

    [tex]m_l= 14.04 Kg[/tex]

b)  [tex]\mu=1.37\%[/tex]

Explanation:

From the question we are told that:

Volume of tank [tex]V_t=1m^3[/tex]

Temperature of [tex]CO_2=-17^oC[/tex]

Quality of the mixture [tex]Q= 70%[/tex]

Specific Volume constants at [tex]-17^oC:[/tex]

 [tex]v_f = 0.9827*10^{-3} m3/kg[/tex]

 [tex]v_g =1.756*10^{-2} m3/kg.[/tex]

Generally the equation for Specific Volume is mathematically given by

 [tex]v = v_f + x (v_g -v_f)[/tex]

 [tex]v= (0.9827 * 10^{-3} ) + 0.8 * (17.56 * 10^{-3} -0.9827 * 10^{-3})[/tex]

 [tex]v= 0.014244 m3/Kg[/tex]

Generally the equation for Mass is mathematically given by

 [tex]m=\frac{v'}{v}[/tex]

 [tex]m=\frac{1}{0.014244}[/tex]

 [tex]m=70.20 Kg[/tex]

Generally the Mass of saturated Vapor is mathematically given by

 [tex]m_v=0.8 * (70.202)[/tex]

 [tex]m_v= 56.16 Kg[/tex]

Generally the Mass of saturated Liquid is mathematically given by

 [tex]m_l = (70.20 Kg)-(56.16 Kg)[/tex]

 [tex]m_l= 14.04 Kg[/tex]

b)

Generally the equation for Volume is mathematically given by

 [tex]v_l = m_l x v_f[/tex]

 [tex]v_l= (14.04 Kg) (0.9827 x 10{-3} m3/kg)[/tex]

 [tex]v_l= 0.01379 m^3[/tex]

Therefore Percentage of liquid

 [tex]\mu = \frac{v_l}{v} * 100 \%[/tex]

 [tex]\mu= [(0.01379 m^3)/(1 m^3)] *100 \%[/tex]

 [tex]\mu=1.37\%[/tex]

Answer:

Explanation:

This is a Law of Momentum Conservbation problem, where the total energy of the system cannot increase or decrease, only change form. The total energy equation for this situation is

TE = PE + KE where TE is total energy, PE is potential energy, and KE is kinetic energy. We begin by realizing that the go-kart is motionless at the top of a hill. If the kart isn't moving, then it has no KE, but if it is up off the ground and has the potential to fall to a point lower than it is curremtly, it has potential energy. That means that the total energy available to this go-kart is found in its potential energy and will not change throughout the trip's entirety. Thus,

TE = PE + 0 and

TE = (50.0)(9.8)(10.0) so

TE = 4900 J and since that's the total energy available throughout the trip, and we are looking to find the height of the next hill where this is both potential and kinetic energy, then

4900 = PE + KE and

4900 = (50.0)(9.8)(h) + [tex]\frac{1}{2}(50.0)(1.0)^2[/tex] and

4900 = 490h + 25.0 and

4875 = 490h so

h = 9.9 m (I kinda ignored the rules for significant digits at the end, which goes against every teacher's bone in my body, but nonetheless, there's your answer!)

Answer:

The answer is "Option B and Option D"

Explanation:

Isopropyl alcohol has an air pressure of 22,39 units with such a water contact angle of 72,86 units.

The melting points of Isopropyl alcohol are higher than water because of the weaker forces between the previously studied.

The flatter meniscus is indeed the isopropyl ethanol so because forces between the particles are smaller.

Answer:

no

Explanation:

the equation can't be balanced because it doesn't have the same elements on each side of the equal sign.

The given equation is not a balanced chemical equation because it does not contain the same elements on both sides of the equation.

A chemical equation can be explained as the representation of a chemical reaction in terms of symbols of the substances. A balanced equation containing the same number of atoms of each element on either side of the equation.

The law of mass conservation is followed by every balanced chemical equation. By obeying this law, the total mass on the reactant side should be equal to the total mass on the product side in a balanced equation.

On both sides of the chemical equation, the same elements as well as an equal number of elements are present as the chemical reaction does not alter the identity of the elements. Therefore, the given equation is not a balanced chemical equation.

Learn more about the balanced chemical equation, here:

brainly.com/question/28294176

#SPJ2

Answer:

3. ultraviolet and x rays

The two forms of electromagnetic energy are used to produce the most spectacular fluorescence when placed in darkness are ultraviolet and x rays.

Electromagnetic radiation is waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays.

Fluorescence is the process in which a substance absorbs light at a high energy, short wavelength and emits light at a lower energy, usually visible wavelength.

Ultraviolet rays is a type of electromagnetic waves in which the wavelength is shorter than visible rays. It is responsible for 10% of sunlight and causes sun tan. It is used to purify water in water purifiers. It kill germs.

X rays lies beyond ultraviolet rays. It is used to diagnose in medical field. It can destroy living tissues so excessive exposure should be limited to reduce harmful effect.

The color change of fluorescent minerals is most spectacular when the minerals are placed in darkness and exposed to electromagnetic energy shorter than visible light.

Ultraviolet and x rays are shorter than visible light so they exhibit fluorescent property.

To learn more about Electromagnetic radiation here

https://brainly.com/question/10759891

#SPJ2

Answer:

A = 70cm³

B= 805 grams

Explanation:

(a) V = L×B×H

= 7cm × 5cm × 2cm

= 35cm × 2cm

= 70cm³

(b) Mass= volume × Density

= 70cm³ × 11.5g/cm³

=805 grams

I hope this will help you ...

Answer:

False

Explanation:

I'm not the most sure but it seems reasonable that it's false

Good Luck Bestie :3

Answer:

The answer is false. If you want why. I will desxribe you.

Answer: True

Explanation:

Answer:

See explanation below

Explanation:

1) Mass

2) Mass

3) Weight

4) Weight

Answer:

Dynamo

Explanation:

Dynamo started to rotate which is known as kinetic energy.When dynamo is in running it produces electricity.dynamo specially used for generating electricity.

Answer:

7.5 J

Explanation:

To answer the question given above, we need to determine the energy that will bring about the speed of 1 m/s. This can be obtained as follow:

Mass (m) = 15 Kg

Velocity (v) = 1 m/s

Energy (E) =?

E = ½mv²

E = ½ × 15 × 1²

E = ½ × 15 × 1

E = ½ × 15

E = 7.5 J

Therefore, to change the speed to 1 m/s, the employee must do a work of 7.5 J.

Answer:

Your answers would be

4. A. sperm and testosterone.

7. C. prostate, penis, Testes

uterus, vagina, fallopian tubes

10. B. Protein

11. A. carbohydrate

12. B. amino acids (I'm not positive on this i haven't taken bio in years

27. D. Respiratory system

Explanation:

yeah

answer = 33.4 net force.

Answer:

Acceleration is the rate of change of velocity. What is commonly said as ‘ten meter per second squared’ can bee broken down into ‘ten meter per second per second.’ This gives us the true meaning of the term acceleration.

Just like ‘ten meter per second’ means increasing the displacement by ten meters every second, ‘ten meter per second per second’ means increasing the velocity by ten meters per second every second.

So, basically if you consider the case of a free fall motion, where ‘t’ stands for time and ‘v’ stand for velocity at that instant:

At,

t=0, v=0 m/s

t=1, v=0+10 m/s;

t=2, v=0+10+10 m/s;

t=3, v=0+10+10+10 m/s;

This can also be thought as a Arithmetic Progression where common difference ‘D’ is the acceleration(a), since it adds a 10 m/s to velocity every second and the first term ‘A’ stands for the initial velocity (u). Using this approach we can derive to the first equation of motion:

v = u + at

Hope this Answer Helps!!

Explanation:

plz mark me as a brainlest and thank my answer

It means that the vehicle's speed increases at the rate of 10m/s every second.

At any time, it's speed is 10 m/s faster than it was 1 second earlier.

Answer:

a. 2:3

b. The data illustrates the law of multiple proportions by showing that the the masses of oxygen that reacts with a fixed mass of sulfur are in a ratio of small whole numbers

Explanation:

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur dioxide = 32 grams

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur trioxide = 48 grams

a. The ration of the weights of oxygen that combine with 32.06 g of sulfur = 32:48 = 2:3

b. The law of multiple proportions states that when two elements are able to interact chemically to form more than one compound, then the (different) weights of one of the element that combines with a fixed weight of the other element are in small whole number ratios

The data demonstrates the law of multiple proportions by showing that the ratios of the weights of oxygen that combine with a fixed weight of sulfur to form sulfur dioxide and sulfur trioxide is in the ratio of 2 to 3 which are small whole number ratios

Answer:

D bcz the slope rose the fastest

Explanation:

I DON'T WANNA BE QUESTIONED, THIS IS BECAUSE y POSITION ROSE FASTER THAN x POSITION

Answer:

vận tốc bằng quãng đường chia thời gian

Explanation:

v=s/t

This type of collision is known as an Inelastic collision.

The speed rate at which car a used is more higher than that of car b because of its friction.

I hope this helps.

Answer:

The water table is the upper surface of the zone of saturation. The zone of saturation is where the pores and fractures of the ground are saturated with water. It can also be simply explained as, the upper level, below which the ground is saturated.

Answer:

The answer is below

Explanation:

i) Since the length of the second clock (radius) is 14 cm = 0.14 m, the distance covered by the second hand in one revelution is:

Distance covered = 2πr = 2π(0.14) = 0.88 m

The time taking to complete one revolution = 60 seconds, hence;

Speed = distance covered in one revolution / time take o complete a revolution

Speed = 0.88 m / 60 s = 0.0147 m/s

ii) Distance covered in 150 s = speed * 150 s = 0.0147 * 150 = 2.2 m

iii) Displacement in 150 seconds = distance from initial position to final position

At 150 s, the hand has covered 2 revolutions and moved 30 s. Hence:

Displacement in 150 seconds = speed * 30 s = 0.0147 * 30 = 0.44 m

Fundamental

forming a necessary base or core; of central importance.

"the protection of fundamental human rights"

Answer:

300cm^3

Explanation:

1ml = 1cm^3

=>300 ml = 300 cm^3