Answer:
pH = 3.68
Explanation:
We can solve this problem by using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[Formate]}{[Formic Acid]}[/tex]Where pKa = -log(Ka)pKa = -log(1.8x10⁻⁴) = 3.74Assuming we have 1 L of the buffer solution then the molar concentrations of formate and formic acid would be:
[Formate] = 0.75 mol / 1 L = 0.75 M[Formic Acid] = 0.85 mol / 1 L = 0.85 MWe now have all required data to calculate the pH:
pH = 3.74 + log[tex]\frac{0.75}{0.85}[/tex]pH = 3.68Nitric acid (HNO3) reacts with ammonia (NH3) in aqueous solution. Use your knowledge of nitric acid to decide what type of reaction arrow(s) to use. $$ Part 2 (1 point) Sulfuric acid (H2SO4) reacts with ammonia in aqueous solution. Use your knowledge of sulfuric acid to decide what type of reaction arrow(s) to use. $$
Answer:
Both reactions are acid-base reactions
Explanation:
An acid base reaction is a reaction that occurs between an acid and a base. This reaction often leads to the formation of a salt in the process. The nature of the salt depends on the type of acid and base that reacted in the process.
Both HNO3 and H2SO4 are strong acids. However, ammonia is a weak base. The acid base reaction between ammonia and these strong acids is shown below;
HNO3(aq) + NH3(aq) ------>NH4NO3(aq)
H2SO4(aq) + 2NH3(aq) ----> (NH4)2SO4(aq)
Write the empirical formula for at least four ionic compounds that could be formed from the following ions:
a). PO3−4
b). NH+4
c). Fe3+
d). ClO−3
Answer:
a. Na₃PO₄
b. NH₄Cl
c. FeCl₃
d. KClO₃
Explanation:
a. Sodium tetraoxophosphate(V) Na₃PO₄
3Na⁺ + PO₄³⁻ → Na₃PO₄
b. Ammonium Chloride NH₄Cl
NH₄⁺ + Cl⁻ → NH₄Cl
c. Iron(III)chloride
Fe³⁺ + Cl⁻ → FeCl₃
d. Potassium trioxochlorate(V) KClO₃
K⁺ + ClO₃⁻ → KClO₃
Choose the compound that exhibits hydrogen bonding as its strongest intermolecular force. Choose the compound that exhibits hydrogen bonding as its strongest intermolecular force. CH2Br2 CH3NH2 LiF C3H8 CF4
Answer:
The given molecules are:
CH2Br2
CH3NH2
LiF
C3H8
CF4.
Which compound consists of the hydrogen bond as the strongest intermolecular force.
Explanation:
The hydrogen bond is the electrostatic force of attraction that exists between the covalently bonded H-atom of one molecule and a high electronegative atom (N, O, F) of another molecule.
For example, H-bonding in water is represented below:
Among the given molecules,
CH2Br2 does not have H-bond because there is no either N or O or F atom in it.
In LiF also there is no H-atom and no hydrogen bond.
C3H8 also does not have H-bond in it.
CF4 also does not have H-atom or hydrogen bond in it.
The answer is CH3NH2(methylamine).
It has an intermolecular hydrogen bond in it as shown in the attachment.
The dashed line represents the H-bond.
Part C
Read about an improved version of an atmospheric water generator e, and write a
one-paragraph description of this technology.
Answer:
Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.
Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point thereby producing potable drinking water.
Explanation:
Atmospheric water generator is used in regions that have scarcity of water or have polluted water. These generators are reliable sources of clean and safe water and hence reduces dependency on bottled water.
Atmospheric water generator extract water from the air (humid air) through condensation. Extracted water then cools down to temperature below its dew point thereby producing potable drinking water.
Answer:
A device that collects water from humid ambient air is known as an atmospheric water generator. Condensation is the process of extracting water vapor from the air by chilling it below its dew point, exposing it to desiccants, or pressurizing it. An AWG, unlike a dehumidifier, is meant to make the water drinkable. Because there is nearly always a little amount of water in the air that may be collected, AWGs are useful in situations where clean drinking water is difficult or impossible to get. Cooling and desiccants are the two most common ways used.
Explanation:
Name a machine used to reap, thresh and clean the crop.
i will give brainliest who answers first
Answer:
combine harvester, or a combiner.
What are the characteristics of ionic compounds?
Answer:
the characteristics of ionic compounds are :
1.They form crystals.
2.They are hard and brittle.
Answer:
they form crystals.
they have high melting and boiling points.
they are hard and brittle.
they are good insulators.
when dissolve in water...they dissociate Into ions.
Chrysanthenone is an unsaturated ketone. If Chrysanthenone has M+ = 150 and contains 2 double bond(s) and 2 ring(s); what is its molecular formula? Enter the formula in the form CH first, then all other atoms in alphabetical order; do not use subscripts. The formula is case-sensitive.
Answer:
the Molecular formula will be; C10H14O
Explanation:
Given the data in the question;
Chrysanthenone is an unsaturated ketone,
it has M+ = 150 and contains 2 double bond(s) and 2 ring(s).
molecular formula = ?
we know that ketone contain 1 oxygen and mass of oxygen is 16
so mass of the C and H remaining will be;
⇒ 150 - 16 = 134
Now we determine the number of C atoms;
⇒ 134 / 13 = 10
hydrocarbon with 10 hydrogen atom have CnH2n+2 means
⇒ ( 10 × 2 ) +2 = 22 hydrogens
But then we have 3 unsaturation meaning 6 hydrogens less and also we have ring meaning 2 more hydrogens
⇒ 22 - 6 - 2 = 14
Hence the Molecular formula will be; C10H14O
Using the formation of formaldehyde as a model, comment on photosynthesis and the formation of sugars using what we know about entropy and free energy.
Answer:
It produces free energy.
Explanation:
Photosynthesis is a process which is used by the plant for producing energy in the form of ATP. This energy is used by the plants in different activities which enables the plant to grow and develop successfully. There are some factors which causes change in the rate of photosynthesis means the production of energy for the plant body. If the environmental factors are suitable, more energy is produced through the process of photosynthesis.
50.0 g of Potassium chloride reacts with 50.0 g of oxygen to produce KCIO3. After writing
and balancing the reaction, determine the amount of potassium chlorate produced
128 g
32.0 g
082.2 g
None of these answers.
Explanation:
If 50.0 grams of Zinc are reacted with 50.0 grams of Hydrogen Chloride ... 50.09 Zn x 1 mol Zn , Imol ZnCl2 , 136.4g. ... If a decomposition reaction produces a 75.0% yield for the oxygen by mass (128.0 grams were.
What is the correct answer question
Answer:
B
Explanation:
True or false? An organism may play more than one role in a food web
Answer:
true
Explanation:
because an organism have many roles in food web
calculate the mass in 4.05*10^22 molecules of calcium phosphate
Answer:
m = 20.9 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by recalling both the Avogadro's number for the calculation of the moles in the given molecules of calcium phosphate and the molar mass of this compound in order to secondly calculate the mass as shown on the following setup:
[tex]m=4.05x10^{22}molecules*\frac{1mol}{6.022x10^{23}}*\frac{310.18g}{1mol}\\\\m=20.9g[/tex]
Regards!
In the reaction represented by the equation: N2 + 3H2 → 2NH3, what is the conversion factor of nitrogen to ammonia? Explain by using law of definite proportion
Answer:
10/3
Explanation:
Hope this helps
Answer:
The compound formula for the ammonia is
N
H
3
. It is a colorless gas. It is the result of the chemical reaction between nitrogen and hydrogen gas. The chemical reaction between the gases is shown below:
N
2
+
3
H
2
→
2
N
H
3
What should the coefficient for the diatomic oxygen (O2) be when this equation is correctly balanced
3
And then for Fe it should be 4 and for the products it should be 2!!
NO2 (nitrogen dioxide) is a Greenhouse Gas that can be produced in car engines. The average diesel truck produces 80g of NO2 for every 1000 kilometers it drives. How many moles of NO2 are in 80g of NO2?
Answer:
[tex]1.74molNO_2[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to perform mole-mass relationships by using the molar mass of the involved substance, in this case NO2, which is 46.0 g/mol; then we just set up a conversion factor like the one shown below:
[tex]80g*\frac{1mol}{46g}\\\\1.74molNO_2[/tex]
Regards!
Ketone bodies are produced when a person what
Answer:
Ketones and ketoacids are alternative fuels for the body that are made when glucose is in short supply. They are made in the liver from the breakdown of fats. Ketones are formed when there is not enough sugar or glucose to supply the body's fuel needs. This occurs overnight, and during dieting or fasting.
Explanation:
Question:
What is the molar concentration of 1.29 mol of KCL dissolved in 350 mL of solution?
Answer:
M = 3.69 M.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the molar concentration of the 1.29 moles of KCl in 350 mL of solution by recalling the mathematical definition of molarity as the division of the moles by the volume in liters, in this case 0.350 L; thus, we proceed as follows:
[tex]M=\frac{1.29mol}{0.350L}\\\\M=3.69M[/tex]
Which gives molar units, M, or just mol/L.
Regards!
1. Rank the following solutions from least polar to most polar. Rank on a scale of 1-4: 1 being the least polar and 4 being the most polar. _______ 50% ISOPROPANOL / H2O _______ 25% ISOPROPANOL / H2O _______ PURE WATER _______ ISOPROPANOL / H2O
Answer:
50% ISOPROPANOL / H2O - 1
25% ISOPROPANOL / H2O - 2
Pure water - 4
ISOPROPANOL / H2O - 3
Explanation:
More Isopropanol concentration is least polar. When the isopropanol is mixed with water its polarity increases. Pure water is most polar. The polarity of a substance is dependent on its ability to bent and mold in the shape as required.
What is the concentration of a solution that is made by diluting 50.0 mL of a 0.40 M NaCl solution to a final volume of 1000.0 mL?
Answer:
The correct answer is 0.020 M.
Explanation:
To solve this problem, we can use the equation M1V1 = M2V2, where M represents the molarity of the solution and V represents the volume of solution. Since we are given that the original solution is 50 mL and 0.40 M, these values are V1 and M1, respectively. The solution after dilution has a volume of 1000 mL, so this value is V2. We are solving for the molarity after dilution, which represents M2.
If we plug in the values specified above, we get the following:
M1V1 = M2V2
(0.40 M)(50.0 mL) = (M2)(1000.0 mL)
Solving for M2, we get:
M2 = 0.020 M
Notice that our answer has 2 significant figures because 0.40 has 2 significant figures, the least of any values given in the problem.
Therefore, the answer is 0.020 M.
Hope this helps!
8. What does the term 'sustainable mean? *
Answer:
something that can be maintained over a period of time
Answer:
a balance between meeting today's needs.......
Explanation:
The human body contains many elements from the periodic table. It is mostly composed of oxygen and carbon, but trace
elements also have a significant role. The table gives the mass, in kilograms, of some elements found in the human body, based
on a 70.0 kg person.
Atomic number
Element
Mass (kg)
8
oxygen
45.2
6
carbon
12.6
1
hydrogen
7.0
7
nitrogen
2.2
20
calcium
1.3
15
phosphorus
0.78
19
potassium
0.25
16
sulfur
0.18
others
0.60
total
70,0
Potassium makes up what fraction of the mass of the human body?
From the question given above, the following data were obtained:
Oxygen = 45.2 Kg
Carbon = 12.6 Kg
Hydrogen = 7 Kg
Nitrogen = 2 Kg
Calcium = 1.3 Kg
Phosphorus = 0.78 Kg
Potassium = 0.25 Kg
Sulphur = 0.18 Kg
Others = 0.60 Kg
Total = 70 Kg
Fraction of potassium =?We can obtain the fraction of potassium of the mass of the body as follow:
Potassium = 0.25 Kg
Total = 70 Kg
Fraction of potassium =?Fraction of potassium = mass of potassium / Total
Fraction of potassium = 0.25 / 70
Fraction of potassium = 1/280Therefore, the fraction of potassium in the body is 1/280
Learn more: https://brainly.com/question/14760859
what is electron configuration of oxygen in its excited state
Answer:
[tex]1 {s}^{2} 2 {s}^{2} 2 {p}^{4} [/tex]
OR
[tex]2 : 6[/tex]
Answer:
If we look at the ground state (electrons in the energetically lowest available orbital) of oxygen, the electron configuration is [tex]1s^{2} 2s^{2} 2p^{4}[/tex] . If the element were to become excited, the electron could occupy an infinite number of orbitals. However, in most texts, the example will be the next available one. So for oxygen, it might look like this: [tex]1s^{2} 2s^{2} 2p^{3}3s^{1}[/tex] - where the valence electron now occupies the 3s orbital in an excited (i.e. not ground) state.
So, the electron configuration of oxygen in its excited state is [tex]1s^{2} 2s^{2} 2p^{3}3s^{1}[/tex].
What is the right answer?
Answer:
equal to zero is the right answer
cuáles son las características de la luz y en qué consisten
Answer:
Cuáles son las características de la luz y en qué consisten?
Explanation:
La luz es una radiación que se propaga en forma de ondas. Las ondas que se pueden propagar en el vacío se llaman ONDAS ELECTROMAGNÉTICAS. La luz es una radiación electromagnética
Identify whether longhand notation or noble-gas notation was used in each case below.
Iron (Fe): [Ar]4s23d6
Answer: The given electronic configuration is long hand notation.
Explanation:
Long-hand notation of representing electronic configuration is defined as the arrangement of total number of electrons that are present in an element.
Noble-gas notation of representing electronic configuration is defined as the arrangement of valence electrons in the element. The core electrons are represented as the previous noble gas of the element that is considered.
The given electronic configuration of potassium (K):
The above configuration has all the electrons that are contained in the nucleus of an element. Thus, this configuration is a long-hand notation.
classify the following compounds as chiral, achiral (but not meso), or meso. 1st structure: _________ 2nd structure: _________ 3rd structure: _________
Answer:
1st structure - Meso
2nd structure - Chiral
3rd structure - achiral
Explanation:
In the 1st structure there is nitrogen atom bonded with 4 different groups. It is Meso compound. In the second structure a carbon atom is attached with hydroxide molecule OH and has four different environment. It is Chiral compound. In the third structure no atom have different atom or group surrounding it. Therefore it is Achiral compound.
HELPP
There are 9.23 x 1023 molecules of water in a beaker, how many moles are there?
Answer:
Answer: There are 1.53 moles present in molecules of water in a beaker.
Explanation:
According to the mole concept, there are molecules present in 1 mole of a substance.
So, number of moles present in molecules are calculated as follows.
Thus, we can conclude that there are 1.53 moles present in molecules of water in a beaker.
Explanation:
12. NAD and NADPH are distinguished from each other by the
that's bonded to the sugar ring attached to the adenine.
O A. phosphate group
O B. adenine
O C. carbon dioxide
O D. nicotinamide
Answer:
A. phosphate group
Explanation:
I got it right in class!
Hope this Helps!! :))
why is tin tin and aluminum the better choice for canned milk
Answer:
Well, they are very durable unlike other packaging food materials, they can be recycled. But, the internet says allumninum cans are much better. and it could be better because you can keep the canned milk cool (cold) for a long lasting time. (keep it in the fridge if you want it to stay cold even longer)
Consider the reaction between solid C and O2 gas which makes CO2;
C+02 -> CO2
If we have a 14 L container of O2 gas at a pressure of 3.0 atm and a temperature of 298 K and we add 36 g of solid C to the
container, then how many grams of CO2 will be produced by this reaction?
Answer:
[tex]m_{CO_2}=75.6gCO_2[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out mandatory for us to calculate the reacting moles of both C and O2 because we are given grams and pressure, temperature and volume, respectively:
[tex]n_C=36gC*\frac{1molC}{12gC}=3.0molC \\\\n_{O_2}=\frac{3.0atm*14L}{0.08206\frac{atm*L}{mol*K}*298K}=1.72molO_2[/tex]
Thus, since C and O2 react in a 1:1 mole ratio, we infer C is in excess, and the grams of CO2 can be calculated with the moles of O2:
[tex]m_{CO_2}=1.72molO_2*\frac{1molCO_2}{1molO_2}*\frac{44.01gCO_2}{1molCO_2} \\\\ m_{CO_2}=75.6gCO_2[/tex]
Best regards!
