You are trying to climb a castle wall so, from the ground, you throw a hook with a rope attached to it at 24.1 m/s at an angle of 65.0° above the horizontal. If it hits the top of the wall at a speed of 16.3 m/s, how high is the wall?

Answers

Answer 1

Answer:

The value is  [tex]h = 13.2 \ m[/tex]

Explanation:

From the question we are told that

    The speed of the rope with hook is [tex]u = 24 .1 \ m/s[/tex]

     The angle is  [tex]\theta = 65.0^o[/tex]

      The speed at which it hits top of the wall is  [tex]v = 16.3 m/s[/tex]

Generally from kinematic equation we have that

      [tex]v_y^2 = u_y ^2 + * 2 (-g)* h[/tex]

Here h is the height of the wall so

      [tex][16.3 sin (65)]^2 = [24.1 sin (65)] ^2+ 2 (-9.8)* h[/tex]

=>    [tex]h = 13.2 \ m[/tex]


Related Questions

how many cups are in 4 gallons

Answers

Answer:

there are 64 cups

Explanation:

remember this: two cups in a pint, two pints in a quart, two pints in a quart, four quarts in a gallonl2

The acceleration due to gravity on the earths surface is?​

Answers

Acceleration due to gravity depends directly on the mass of Earth and inversely to the square of radius of Earth.

Answer:

9.8 m/s2

Explanation:

Acceleration due to gravity is the acceleration gained by an object due to the gravitational force. Its SI unit is m/s 2. It has both magnitude and direction, hence, it’s a vector quantity. Acceleration due to gravity is represented by g. The standard value of g on the surface of the earth at sea level is 9.8 m/s2.

A block weighing 0.4 N is used to balance the bar.
Calculate how far from the pivot the block needs to be placed to balance the bar.
Show your working.

Answers

Answer:

0.25N

Explanation:

MOMENT OF FORCE= Force INTO perpendicular distance

=0.5m into 0.2N=0.1Nm

Then Distance = M divided by force

0.1 divided by 0.4= 0.25N

An object is thrown straight up into the air with an initial speed of 8 m/s, and reaches a greatest height of 15 m before it falls back to the ground. a. What height is the object thrown from? b. How long does it take for the object to hit the ground?

Answers

Answer:

The value is [tex]T_t = 2.5659 \ s[/tex]    

Explanation:

From the we are told that  

         The initial speed of the object is  [tex]u = 8 \ m/s[/tex]

         The greatest height it reached is  [tex]h = 15 \ m[/tex]

Generally from kinematic equation we have that

      [tex]v^2 = u^2 + 2gH[/tex]

At maximum height v  =  0 m/s

So

      [tex]0^2 = 8^2 + 2 * - 9.8 * H[/tex]

=>    [tex]H = 3.27 \ m[/tex]

Here H is the height from the initial height to the maximum height

So the initial height is mathematically represented as  

      [tex]s = h - H[/tex]

=>    [tex]s = 15 - 3.27[/tex]

=>    [tex]s = 11.73 \ m[/tex]

Generally the time taken for the object to reach maximum height is mathematically evaluated using kinematic equation as follows

            [tex]v = u + (-g) t[/tex]

At maximum height v  =  0 m/s

           [tex]0 = 8 - 9.8t[/tex]

=>         [tex]t = 0.8163 \ s[/tex]

Generally the time taken for the object to move from the maximum height to the ground is mathematically using kinematic equation as follows

       [tex]h = ut_1 + \frac{1}{2} gt_1^2[/tex]

Here the initial velocity is  0 m/s given that its the velocity at maximum height

Also  g is positive because we are moving in the direction of gravity  

So

       [tex]15 = 0* t + 4.9 t^2[/tex]

=>      [tex]t_1 = 1.7496[/tex]

Generally the total time taken is mathematically represented as

          [tex]T_t = t + t_1[/tex]

=>        [tex]T_t = 0.8163 + 1.7496[/tex]

=>        [tex]T_t = 2.5659 \ s[/tex]            

 

Arif decided to make a model of the global wind patterns on Earth. He draws arrows of the global winds that move in a circular pattern from the equator to the poles and back again. Explain what causes global winds to form. Why do they move in convection currents around Earth? Please help

Answers

Answer:

The Earth's rotation which produces Coriolis force is the responsing factor for the formation and movement of different global winds.

The cause of the global winds is due to the rotation of the earth that produces the Coriolis force factor for the formation and movement of global winds.

What are global wind patterns?

The global wind pattern is formed by the movement of the earth and they are polar easterlies, prevailing westerlies and the trade winds.

Each of them occurs at about 30 degrees of latitude. Hence they form wind belts. The Coriolis effect that is created due to the rotation of the earth is a fact that leads to the movement of global winds.

Find out more information about the earth.

brainly.com/question/25624188

Light that enters your eye strikes cells in the back of your eye
true
False

Answers

Answer: True

Explanation: Light enters your eye through the lens which then hits the retina which is located in the back of your eye.

Can someone help me out?

Answers

Answer:

B). Rarefaction :) _____

the arrow points to the rarefactions

A student wearing a frictionless roller skates on a horizontal is pushed by a friend with a constant force of 55N. How far must the student be pushed, starting from rest, so that her final kinetic energy is 362 J

Answers

Answer:

6.58m

Explanation:

The kinetic energy = Workdone on the roller

Workdone = Force * distance

Given

KE = Workdone = 362J

Force = 55N

Required

Distance

Substitute into the formula;

Workdone = Force * distance

362 = 55d

d = 362/55

d = 6.58m

Hence the student must push at a distance of 6.58m

All of the following use an electric motor, EXCEPT
A.) radio
B.) blender
C.) hair dryer
D.) electric fan

Answers

Answer:

radio

Explanation:

Answer:

radio

Explanation:

all except radio use electric motors

_______________ is the name for the permanent destruction and clearing of forests

Answers

Answer:

Deforestation

Explanation:

__________________________________________________________

According to Vocal Media,

__________________________________________________________

Deforestation is the permanent destruction of forests in order to utilize the land or trees. Typically, deforestation is clearing a lot of trees without the intention of establishing future growth. Harvesting, forest fires, and insect infestations do not count as deforestation because the affected areas will eventually grow back.

__________________________________________________________

Hope this helps! <3

__________________________________________________________

Janet jumps horizontally off a high diving platform with a velocity of 2.76 m/s and lands in the water 2.3 s later. How high is the platform? The acceleration of gravity is 9.8 m/s. Answer in units of m.

How far from the base of the platform does she land? Answer and units of m.​

Answers

Answer:

(a) Let the height of the platform is h meter,

=>By s = ut + 1/2gt^2

=>h = 0 + 1/2 x 9.8 x (2.3)^2

=>h = 25.92 m

(b) By R = [Ux] x t

=>R = 2.47 x 2.3

=>R = 5.68 m

Explanation:

Explanation:

From the exercise we know the initial horizontal velocity and the time that Janet takes to land in the water

a) Knowing the formula for free falling objects, we can calculate how high is the platform

At t=2.3m the position of Janet is y=0m

So, the platform is 26m tall

b) According to dynamics the displacement of an object can be analyze using the following formula:

So, Janet lands 6 m far from the base of the platform

a man walks 30 meters north,then 90 meters east, and then 30 meters south​

Answers

Explanation:

D = 30+90+30

= 150m

.............

what's the question

Which of these is an example of electrical energy being converted to mechanical energy?

Group of answer choices
Sunlight used by plants in photosynthesis
Ceiling fan
Lightning striking the ground

Answers

Answer:

Ceiling fan

Explanation:

A ceiling fan is an example of electrical energy being converted to mechanical energy.

The blades of the fan are driven by motor within the system.

Energy in a system is converted from one form to the other. Energy is neither created nor destroyed as we know from the law of conservation of energy. In this regard, the electrical energy from the outlet powers the motor. As the motor inside the fan spins, the blade in turn begins to rotate. The motion of the blade is the expression of mechanical energy.

CAN SOMEONE HELP ME WITH THIS QUESTION!!

Answers

Answer:

The one you have selected

Explanation:

That is right

Wish me Luck ! ! !
Im about to take my Fall 2020 Semester Physics Exam!

Answers

Answer:

Good Luck :)

Have a great day:)

Two ice skaters are at rest and facing each other. In order to move, they push
off each other. What is known about their final total momentum?
A. One skater must remain at rest.
B. Nothing is known about the final total momentum.
C. The final total momentum must equal zero.
D. Since they are on ice, this will not work. Neither can move.

Answers

Answer:

A

Explanation:

Hopefully this helps

Two ice skaters are at rest and facing each other. In order to move, they push off each other, then their net final total momentum must equal zero, therefore the correct answer is option C.

What is momentum?

It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.

As given in the problem statement two ice skaters are at rest and facing each other. In order to move, they push off each other,  

By using the conservation of the momentum,

The initial total momentum of two skaters = the final total momentum of the skaters

Since, initially, they are at rest and their initial total momentum is zero  therefore the correct answer is option B

To learn more about momentum from here, refer to the link;

brainly.com/question/17662202

#SPJ5

help i hope this actually works

Answers

Answer:

it does tbh.

Explanation:

Applying the Law of Conservation of Energy. If a car was released down the track from a height what happens to the potential energy and Kinetic energy as the car goes down the ramp?

Answers

Answer:

According to the law of conservation of energy, energy cannot be created or destroyed,  although it can be changed from one form to another.    KE + PE = constant. A simple example involves a stationary car at the top of a hill.  As the car coasts down the hill, it moves faster and so it’s kinetic energy increases and it’s potential energy decreases.  On the way back up the hill, the car converts kinetic energy to potential energy.  In the absence of friction, the car should end up at the same height as it started.

This law had to be combined with the law of conservation of mass when it was determined that mass can be inter-converted with energy.

One can also imagine the energy transformation in a pendulum.  When the ball is at the top of its swing, all of the pendulum’s energy is potential energy.   When the ball is at the bottom of its swing, all of the pendulum’s energy is kinetic energy.   The total energy of the ball stays the same but is continuously exchanged between kinetic and potential forms

A sledge is pulled in a straight line by dogs, as shown. The dogs produce a total horizontal driving force of 600 N. The frictional force between the sledge and the surface is 150 N and the air resistance on the sledge is 450 N. What is the resultant force acting on the sledge

Answers

Answer:

F = 0 N

Explanation:

The direction of air resistance and frictional force will be same and opposite to the direction of the driving fore of dogs. Therefore, the resultant force can be given as follows:

[tex]resultant\ Force = F = Driving\ Force\ of\ Dogs - Frictional\ Force - Air\ Resistive\ Force[/tex]here,

driving force of dogs = 600 N

Frictional Force = 150 N

Resultant Force = 450 N

Therefore,

[tex]F = 600\ N - 150\ N- 450\ N[/tex]

F = 0 N

Chapter 5 Review Questions
How would you calculate the spring constant of an unknown spring?
A. graph the force vs. extension of the spring and find the slope
B. Use Hooke's law to calculate the spring constant knowing one force of the spring and one deformation of the spring
C. graph the force vs. extension of the spring and find the inverse of the slope
D. conduct a series of experiments with different amounts of deformation on the spring and calculate spring constant with Hooke's Law

Answers

It’s problaly A it’s the first force

How can humans use their knowledge of changing states of matter to better society? (ex. A human can harness the thermal energy from transitioning water from a liquid state to a gas state.)
Please Hurry This assignment is due tonight.
Write 5 sentences why. Thanks

Answers

Answer:

Anything that has mass is made up of matter – an all-encompassing word for atoms and molecules that make up our physical world. We describe this matter as existing in states (sometimes referred to as phases). Most people are familiar with three states of matter – solids, liquids and gases – but there are two more that are less commonly known but just as important – plasmas and Bose-Einstein condensates

Which of these games was a racing game?
A.
Centipede
B.
Pole Position
C.
Xevious
D.
Galaxian
E.
Space Invaders

Answers

Answer:

B.

pole position

help me help me please please, please

Answers

mUsT bE 20 ChaRacTers LonG

A 10 N force and an 18 N force act in the same direction on an object. What is the net force on the object?

Answers

Answer:

28 N

Explanation:

From the question given above, we were told that 10 N force and 18 N force act in the same direction on the object.

The net force acting on the object can be obtained by simply adding both forces together since they both act on the object in the same direction. This is illustrated below:

Force 1 (F₁) = 10 N

Force 2 (F₂) = 18 N

Net force (Fₙ) =?

Fₙ = F₁ + F₂ (since they both act in the same direction)

Fₙ = 10 + 18

Fₙ = 28 N

Therefore, the net force acting on the object is 28 N.

Which is the correct equation for the force applied by a spring?

Answers

Answer:

B. [tex]F = -k*x[/tex]

Explanation:

The force of a spring can be easily calculated using Hooke's law which tells us that the force applied on a spring is equal to the product of the constant of a spring by the compressed or stretched distance of the spring.

That is:

[tex]F = k*x[/tex]

k = spring constant [N/m]

x = distance [m]

A person pours some chlorine bleach into a clothes washer to remove stains from the clothing. What is one chemical property or the bleach?

A. It’s density
B. It’s mass
C. It’s color
D. It’s pH

Answers

One chemical property of the bleach is its pH.

What is pH?

This is referred to as the power of hydrogen and is a measure of how acidic/basic a substance is.

pH is an example of  chemical property because it's associated with a change in its chemical composition. This thereby makes option D the most appropriate choice.

Read more about pH here https://brainly.com/question/4137247

Answer:   It's   pH

Explanation:   I took the test

water starts to freeze from top whereas wax starts to freeze from bottom?why?​

Answers

Answer:

im pretty sure its because wax has i higher melting point therefore it would cool quicker if the temperature dropped more. water has a lower melting point so it takes longer to freeze i think. i hope this helps

Water and wax freeze from different directions due to the unique properties and behaviors of these substances.

Water:

When water freezes, it undergoes a phase transition from a liquid to a solid state.

Unlike most substances, water exhibits an unusual property known as the "anomalous expansion of water" or "density anomaly." This anomaly is caused by the hydrogen bonding between water molecules.

As the water cools down, its molecules begin to slow down and move closer together. This causes the density of the water to increase. However, as the water reaches around 4 degrees Celsius (39 degrees Fahrenheit), it starts to behave differently.

The hydrogen bonds between water molecules become more organized and stable, causing the water to expand and become less dense.

Wax:

Wax, on the other hand, does not exhibit the same density anomaly as water. When wax undergoes solidification, it follows a different pattern due to its molecular structure and the way its particles arrange themselves.

Wax typically consists of long, nonpolar hydrocarbon chains. As it cools, the wax molecules start to lose kinetic energy, slowing down their movement.

The intermolecular forces between the wax molecules become stronger, causing them to come closer together.

In summary, water freezes from the top due to its density anomaly, with the less dense, expanded water rising and forming a layer of ice on the surface.

Wax, however, freezes from the bottom as its molecules arrange and bond together, gradually solidifying upwards. These differences in freezing behavior are influenced by the distinct properties and molecular structures of water and wax.

Know more about hydrogen bonds:

https://brainly.com/question/30885458

#SPJ4

help PLEASE

eating a healthy breakfast gives you the energy to run a marathon

A. mechanical to electrical
B. chemical to nuclear
C. chemical to mechanical
D. radiant to thermal

Answers

Answer:

d I believe so

Explanation:

d yes?????

Help me PLEASE! 25 points!!!!! :)

Answers

Answer:

A.

Explanation:

All the arrows align to the point right

Which of these is not a method of preventing the corrosion of metals?
A) galvanising
B) painting
C) plating
D) rusting

Answers

Answer:

D

Explanation:

rusting is actually the corrosion of metals so it can't be a way to prevent itself.

Other Questions
how do u say " i need a shirt and pants" in Spanish most simple way Read these questions.Where does the story take place? In what year is the story set in? How does the main character fit in with her surroundings?A student might ask these types of questions to help in understanding the plotsresolution.falling action.climax.exposition. PLEASE ANSWER ASAP FOR BRAINLEST!!!!!!!!!!!!!!!!1Write an expression that is equivalent to 3k - 18 Need help with wrinkle in time Fase del Horizonte Preclsico que se caracteriza por la vida de tipo aldeano y durante la cual se fueron formando algunas diferencias sociales, determinadas por el poder, los jefes empezaron a fomentar la construccin de algunos templetes y reunieron a artesanos especializados. * Please answer only if u sure your answer is righttt how many hours is 10am to 7:30pm PLEASE I NEED HELP ON THIS ONE TOO THANK YOU BRAINLY IF CORRECT TYSM PLEASE HELPWhich organization is a major part of the executive branch?A. The House of RepresentativesB. The U.S. SenateC. The cabinetD. The Supreme Court A hot air balloon can hold up to 300 pounds of weight. The balloon's pilot weighs 140 pounds. How many 20-pound bags of sand (b) can also be carried by the hot air balloon? Select three options.205810It's these since none of the others are correct are 0,5, and 8. Otherwise known as B,C,and D plz help ill mark brainliest for correct answer Why might CAM professionals have to recertify every few years?O A. Because they will lose their original certification after a certainamount of time passesOB. Because they will no longer remember what they initially learnedafter a few yearsOC. Because they must stay up-to-date on new or improved standardsand practicesOD. Because they will no longer remember what they initially learnedafter a few yearsSUBMIT Which one should I choose PLZZ ZZZZZZ HELPPPPPPP A power plant to represent the need for and use for energy; label it energy production. pls help me TwT than u very much What is the net ionic equation for the acid-base reaction between chlorous acid and sodium hydroxide? Your soul is an appalling dump heap overflowing with the most disgracefulAssortment of deplorable rubbish imaginable mangled up in tangled up knots!Find figurative language find the value of x then classify the triangle by its angles Which general was in command at the battle of saratoga, but lost in his first major battle in the south? What is the amount of the interest on a 5 year loan of $2000 with 4.5 % simple interest rate?