You are performing an experiment that requires the highest-possible magnetic energy density in the interior of a very long current-carrying solenoid. Which of the following adjustments increases the energy density?a. Increasing only the length of the solenold while keeping the turns per unit lengh flxed. b. Increasing the number of turns per unit length on the solenold. c. Increasing the cross-sectional area of the solenoid. d. None of these. e. Increasing the current in the solenoid.

Answers

Answer 1

Answer:

The correct choice is B & E.  

Explanation:

A solenoid is a coil of wire (usually copper) which is used as an electromagnet. Solenoids are used to convert electrical energy to mechanical energy. When this type of device is created it is also called a solenoid. One can increase the energy density within the solenoid or the coil by upping the electric current in the coil.

Cheers!


Related Questions

A microwave oven operates at a frequency of 2400 MHz. The height of the oven cavity is 25 cm and the base measures 30 cm by 30 cm. Assume that microwave energy is generated uniformly on the upper surface of the cavity and propagates directly
downward toward the base. The base is lined with a material that completely absorbs microwave energy. The total microwave energy content of the cavity is 0.50 mJ.

A)The power output of the microwave oven is?
B) The intensity of the microwave beam is?
C) The electric field amplitude is?
D) The force on the base due to the radiation is?

Answers

Answer:

power = 600000 W

intensity = 6666666.66 W/m²

Em = 70880.18 N/m

F = 2 × [tex]10^{-3}[/tex] N  

Explanation:

given data

frequency f = 2400 MHz

height oven cavity h = 25 cm = 0.25 m

base area measures A =  30 cm by 30 cm

total microwave energy content of cavity E = 0.50 mJ = 0.50 × [tex]10^{-3}[/tex]  

solution

first, we get here total time taken from top to bottom that is express as

Δt = [tex]\frac{h}{c}[/tex]  ...............1

Δt = [tex]\frac{0.25}{3\times 10^8}[/tex]  

Δt = 8.33 × [tex]10^{-10}[/tex] s

and

power output will be

power = [tex]\frac{E}{\Delta t}[/tex]   ..............2

power = [tex]\frac{0.50 \times 10^{-3}}{8.33 \times 10^{-10}}[/tex]

power = 600000 W

and

intensity of the microwave beam is  

intensity = power output ÷ base area    ..............2

intensity =  [tex]\frac{600000}{30 \times 30 \times 10^{-4}}[/tex]  

intensity = 6666666.66 W/m²

and

electric field amplitude is

as we know intensity  I = [tex]\frac{E^2}{c \mu o}[/tex]     ...............3

[tex]E(rms) = \sqrt{Ic\ \mu o} \\E(rms) = \sqrt{6666666.66 \times 3 \times 10^{8} \times 4 \pi \times 10^{-7} }[/tex]

E(rms) = 50119.87 N/m

and we know

[tex]E(rms) = \frac{Em}{\sqrt{2}}\\50119.87 = \frac{Em}{\sqrt{2}}[/tex]  

Em = 70880.18 N/m

and

force on the base due to the radiation is by the radiation pressure

[tex]Pr = \frac{l}{c}[/tex]    ..................4

[tex]\frac{F}{A} = \frac{l}{c}[/tex]  

so

F = [tex]\frac{6666666.66 \times 900 \times 10^{-4}}{3\times 10^8}[/tex]  

F = 2 × [tex]10^{-3}[/tex] N  

Calculate the time it would take a cell phone signal to travel from a point on the equator to the satellite and back.

Answers

the signal to go back could possibly take 1 yr or maybe more

The frequency of light emitted from hydrogen present in the Andromeda galaxy has been found to be 0.10% higher than that from hydrogen measured on Earth.
Is this galaxy approaching or receding from the Earth, and at what speed?

Answers

Answer:

3x10^5m/s

Explanation:

See attached file

Explanation:

The speed of the light emitted from the earth is approaching the galaxy at [tex]3\times 10^5\;\rm m/s[/tex].

Doppler's Effect

According to the Doppler effect, the difference between the frequency at which light wave leave a source and reaches an observer is caused by the relative motion of the observer and the wave source.

Given that the difference in the frequency is 0.10 %. The speed of light emitted from the galaxy can be calculated by the Doppler effect.

[tex]\dfrac {\Delta f}{f} = \dfrac {v}{c}[/tex]

Where f is the frequency of the light, v is the speed of light emitted from the galaxy and c is the speed of light emitted from the earth.

[tex]\dfrac {0.10 f}{100 f} = \dfrac {v}{3\times 10^8}[/tex]

[tex]v = 3\times 10^5\;\rm m/s[/tex]

Hence we can conclude that the speed of the light emitted from the earth is approaching the galaxy at [tex]3\times 10^5\;\rm m/s[/tex].

To know more about the doppler effect, follow the link given below.

https://brainly.com/question/1330077.

A car starts from rest and accelerates with a constant acceleration of 5 m/s2 for 4 s. The car continues for 18 s at constant velocity. How far has the car traveled from its starting point

Answers

110m/s Or 36meters or miles, I think this is the answers

Hope this helped ♥︎

Water flows through a cylindrical pipe of varying cross-section. The velocity is 5.00 m/s at a point where the pipe diameter is 1.50 cm. At a point where the pipe diameter is 3.00 cm, the velocity is

Answers

Explanation:

We know that rate of flow through a cross section :

[tex]v1 \times a1 = v2 \times a2[/tex]

5 m/s * 1.76cm^2 = v2 * 7.06cm^2

[tex]v2 = 1.24 \: m {s}^{ - 1} [/tex]

At a point where the pipe diameter is 3.00 cm, the velocity is 1.25 m/s.

What is fluid flow?

Fluid Flow, a branch of fluid dynamics, is concerned with fluids. It involves the movement of a fluid under the influence of uneven forces. As long as unbalanced pressures are applied, this motion will persist.

Given parameters:

Initial velocity of the water: u = 5.00 m/s

Initial diameter of the pipe: d = 1.50 cm.

Final diameter of the pipe: D = 3.00 cm.

Final velocity of the water: v = ?

In fluid motion:

velocity×(diameter)² = constant

Hence, initial velocity × ( initial diameter)² = final velocity × ( final diameter)²

ud² = vD²

v = u (d/D)²

v= 5 × (1.50/3.0)²

v= 5/2²

v= 5/4

v= 1.25 m/s.

Hence, at a point where the pipe diameter is 3.00 cm, the velocity is 1.25 m/s.

Learn more about fluids flow here:

https://brainly.com/question/28727482

#SPJ5

Positive charge Q is placed on a conducting spherical shell with inner radius R1 and outer radius R2. The electric field at a point r < R1 is:

Answers

Answer:

E = 0    r <R₁

Explanation:

If we use Gauss's law

      Ф = ∫ E. dA = [tex]q_{int}[/tex] / ε₀

in this case the charge is distributed throughout the spherical shell and as we are asked for the field for a radius smaller than the radius of the spherical shell, therefore, THERE ARE NO CHARGES INSIDE this surface.

Consequently by Gauss's law the electric field is ZERO

           E = 0    r <R₁

A 70 kg human body typically contains 140 g of potassium. Potassium has a chemical atomic mass of 39.1 u and has three naturally occurring isotopes. One of those isotopes, 40K,is radioactive with a half-life of 1.3 billion years and a natural abundance of 0.012%. Each 40K decay deposits, on average, 1.0 MeV of energy into the body. What yearly dose in Gy does the typical person receive from the decay of 40K in the body?

Answers

Answer:

0.03143 Gy

Explanation:

Mass of the human body = 70 kg

Mass of potassium in the human body = 140 g

chemical atomic mass of potassium = 39.1

From avogadros number, we know that 1 atomic mass of an element contains 6.023 × 10^(23) atoms

Thus,

140g of potassium will contain;

(140 × 6.023 × 10^(23))/(39.1) = 2.1566 × 10^(24) atoms

We are told that the natural abundance of one of the 40K isotopes is 0.012%.

Thus;

Number of atoms of this isotope = 0.012% × 6.023 × 10^(23) = 7.2276 × 10^(19) K-40 atoms

Formula for activity of K-40 is given as;

Activity = (0.693 × number of K-40 atoms)/half life

Activity = (0.693 × 7.2276 × 10^(19))/1300000000

Activity = 3.85 × 10^(10)

We are told that each decay deposits 1.0 MeV of energy into the body.

Thus;

Total energy absorbed by the body in a year = 3.85 × 10^(10) × 1 × 365 = 1405.25 × 10^(10) MeV

Now, 1 MeV = 1.602 × 10^(-13) joules

Thus;

Total energy absorbed by the body in a year = 1405.25 × 10^(10) × 1.602 × 10^(-13) = 2.25 J

1 Gy = 1 J/kg

Thus;

Yearly dose = 2.25/70 = 0.03143 Gy

please help !!!!!!!!!!!!!!!!!! give the answer to the question i. which lighthouse will be warmer during the day time and why ? ii. which lighthouse will be warmer during the night time and why ? please help

Answers

Answer:

I. light house 1 will be warmer during the day ii. light house 2 will be warmer at night.

Explanation:

Because the land conducts heat better than water the light house farthest away from the water will get hotter during as the ground will heat up faster than the water. But this also means that the ground will lose heat faster at night where the water won't making the light house closest to the water hotter at night.

The switch on the electromagnet, initially open, is closed. What is the direction of the induced current in the wire loop (as seen from the left)?

Answers

Answer:

The induced current is clockwise

2.) Is it possible to have negative velocity but positive acceleration? If so, what would
this mean?

Answers

Answer:

Yes, yes it would

Explanation:

A single-slit diffraction pattern is formed on a distant screen. Assuming the angles involved are small, by what factor will the width of the central bright spot on the screen change if the slit width is doubled

Answers

Answer:

y ’= y / 2

thus when the slit width is doubled the pattern width is halved

Explanation:

The diffraction of a slit is given by the expressions

          a sin θ = m λ

where a is the width of the slit, λ is the wavelength and m is an integer that determines the order of diffraction.

          sin θ = m λ / a

If this equation

          a ’= 2 a

we substitute

          2 a sin θ'= m λ

          sin θ'= (m λ / a)  1/2

          sin θ ’= sin θ / 2

           

We can use trigonometry to find the width

         tan θ = y / L

as the angle is small

         tan θ = sin θ / cos θ = sin θ

         sin θ = y / L  

         

we substitute

        y ’/ L = y/L   1/2

        y ’= y / 2

thus when the slit width is doubled the pattern width is halved

What is the threshold velocity vthreshold(ethanol) for creating Cherenkov light from a charged particle as it travels through ethanol (which has an index of refraction of n

Answers

Explanation:

The velocity of light in a medium of refractive index [tex]n[tex] is given by,

[tex]v=\frac{c}{n}[/tex]

[tex]v \text { is the velocity of light in the medium }[/tex]

[tex]c \text { is speed of light in vacuum }[/tex]

The exact value of speed of light in vacuum is [tex]299792458 \mathrm{m} / \mathrm{s}[/tex].

For Cherenkov radiation to be emitted, the velocity of the charged particle traversing the medium must be greater than this velocity. Thus, the threshold velocity of for creating Cherenkov radiation is,

[tex]v_{\text {Cherenkov }} \geq \frac{c}{n}[/tex]

[tex]v_{\text {threshod }}=\frac{c}{n}[/tex]

For water [tex]n=1.33,[tex] thus the threshold velocity for producing Cherenkov radiation in water is,

[tex]v_{\text {threatold }(\text { water })} &=\frac{299792458 \mathrm{m} / \mathrm{s}}{1.33}[/tex]

[tex]=225407863 \mathrm{m} / \mathrm{s}[/tex]

[tex]=2.254 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

For ethanol [tex]n=1.36[tex], thus the threshold velocity for producing Cherenkov radiation in water is,

[tex]v_{\text {threstold }( \text { ettanol) } } &=\frac{299792458 \mathrm{m} / \mathrm{s}}{1.36}[/tex]

[tex]=220435630 \mathrm{m} / \mathrm{s}[/tex]

[tex]=2.204 \times 10^{8} \mathrm{m} / \mathrm{s}[/tex]

Answer:

The answer is "2.2 × [tex]\bold{10^8}[/tex]".

Explanation:

In the given question the value of n is missing which can be defined as follows:

n= 1.36

The velocity value of the threshold(ethanol) for a generation the Cerenkov light from the charged particle by travel through ethanol as:

know we will have to use an equation as follows:

Formula:      

(ethanol) or the vthreshold = [tex]\frac{c}{n}[/tex]

                                         [tex]= \frac{3\times 10^8} {1.36} \\\\= 2.2 \times 10^8[/tex]

The water in vthreshold:

[tex]= 2.2 \times 10^8 \ \ \frac{m}{ s} \\\\[/tex]

Express the value in c, that is multiple, so, the value of vthreshold(water) is:

=(0.735) c

How long will it take a spacecraft travelling at 99% the speed of light (gamma = 7) to reach

the star Sirius which is 8.6 light-years away according to people on Earth ? How long will it

take according to the crew of the ship?

Answers

Answer:

The time taken is  [tex]t = 2.739 *10^{8} \ s[/tex]

Explanation:

From the question we are told that

    The speed of the spacecraft is [tex]v = 0.99c[/tex]

    where c is the speed of light with value [tex]c = 3.0*10^{8} \ m/s[/tex]

    =>   [tex]v = 0.99 * 3.0 *10^{8 } = 2.97*10^{8}\ m/s[/tex]

    The distance of Sirius is [tex]d = 8.6 \ light-years = 8.6 * 9.461*10^{15}= 8.135*10^{16} \ m[/tex]

   

Generally the time taken is mathematically represented as

       [tex]t = \frac{d}{v}[/tex]

substituting values

      [tex]t = \frac{8.136 *10^{16}}{2.97 *10^{8}}[/tex]

      [tex]t = 2.739 *10^{8} \ s[/tex]

I WILL GIVE BRAINLIEST Identify two types of motion where an object's speed remains the same while it continues to change direction

Answers

Answer:

velocity and acceleration

Answer:

Hey there!

Centripetal (Circular Motion) and Oscillating Motion.

Let me know if this helps :)

how many electrons do calcium have in their outer shell

Answers

Answer:

Calcium has two electrons in its outer shell.

Explanation:

Calcium is defined as a metal due to its physical and chemical traits. The two outer electrons are very reactive. Calcium has a valence of 2.

g To decrease the intensity of the sound you are hearing from your speaker system by a factor of 36, you can

Answers

Answer:

Increase the distance by a factor of 6.

Explanation:

The intensity at a distance r is given by :

[tex]I=\dfrac{P}{4\pi r^2}[/tex]

Here,

P is power emitted

r is distance from source

It means that the intensity is inversely proportional to the distance from the source.

To decrease the intensity of the sound you are hearing from your speaker system by a factor of 36, we can increase the distance by a factor of 6. Hence, this is the required solution.

A beam of light from a laser illuminates a glass how long will a short pulse of light beam take to travel the length of the glass.

Answers

Answer:

The time of short pulse of light beam is [tex]2.37\times10^{-9}\ sec[/tex]

Explanation:

Given that,

A beam of light from a laser illuminates a glass.

Suppose, the length of piece is [tex]L=25.21\times10^{-2}\ m[/tex]

Index of refraction is 2.83.

We need to calculate the speed of light pulse in glass

Using formula of speed

[tex]v=\dfrac{c}{\mu}[/tex]

Put the value into the formula

[tex]v=\dfrac{3\times10^{8}}{2.83}[/tex]

[tex]v=1.06\times10^{8}\ m/s[/tex]

We need to calculate the time of short pulse of light beam

Using formula of velocity

[tex]v=\dfrac{d}{t}[/tex]

[tex]t=\dfrac{d}{v}[/tex]

Put the value into the formula

[tex]t=\dfrac{25.21\times10^{-2}}{1.06\times10^{8}}[/tex]

[tex]t=2.37\times10^{-9}\ sec[/tex]

Hence, The time of short pulse of light beam is [tex]2.37\times10^{-9}\ sec[/tex]

To protect her new two-wheeler, Iroda Bike
buys a length of chain. She finds that its
linear density is 0.68 lb/ft.
If she wants to keep its weight below 1.4 lb,
what length of chain is she allowed?
Answer in units of ft.

Answers

Answer:

1.8/0.61 =2.95 ft

Hope it helped u if yes mark me BRAINLIEST!

Tysm!

;)

an electron travels at 0.3037 times the speed of light through a magnetic field and feels a force of 1.2498 pN. What is the magnetic field in teslas

Answers

Answer:

Explanation:

Charge on an electron (q) = 1.6 * 10 ^ -19 C

Velocity of electron (v) = 0.3037 * 300,000,000 = 91,110,000 m/sec

We know that, Force exerted on moving particle moving through a magnetic field :

[tex]F= q * v * B ( q,v\ and\ B\ are\ mutually\ perpendicular)[/tex]

1.2498 * 10 ^ -12 = 1.6 * 10^ -19 * 91110000 * B

B =  0.08573 T

A sphere of radius R has charge Q. The electric field strength at distance r > R is Ei.
What is the ratio Ef /Ei of the final to initial electric field strengths if (a) Q is halved, (b) R is halved, and (c) r is halved (but is still > R)? Each part changes only one quantity; the other quantities have their initial values.

Answers

Answer:

A. Ef/ Ei = 1/2

B. EF/ Ei = 1

C Ef / Ei = 4

Explanation:

To solve this we apply Coulomb's law which States that

E = Kq / r^2

Where

q = charge r = straight line distance from q to the point in question and

K = Coulomb's constant

Then

Ei = K Q / r^2

So

A) If Q is halved then

Ef = K Q / (2 r^2)

Ef/Ei = 1/2

B) If R is halved, the value of the E-f

at a distance r remains unchanged. So

Ef/Ei = 1

C) if r is now r/2 then

Ef = K Q / (r/2)^2 = K Q / r^2/4 = 4 K Q / r^2

Ef / Ei = 4


A load of 1 kW takes a current of 5 A from a 230 V supply. Calculate the power factor.

Answers

Answer:

Power factor = 0.87 (Approx)

Explanation:

Given:

Load = 1 Kw = 1000 watt

Current (I) = 5 A

Supply (V) = 230 V

Find:

Power factor.

Computation:

Power factor = watts / (V)(I)

Power factor = 1,000 / (230)(5)

Power factor = 1,000 / (1,150)

Power factor = 0.8695

Power factor = 0.87 (Approx)

A single-turn current loop carrying a 4.00 A current, is in the shape of a right-angle triangle with sides of 50.0 cm, 120 cm, and 130 cm. The loop is in a uniform magnetic field of magnitude 75.0 mT whose direction is parallel to the current in the 130 cm side of the loop. What is the magnitude of the magnetic force on the

Answers

Given that,

Current = 4 A

Sides of triangle = 50.0 cm, 120 cm and 130 cm

Magnetic field = 75.0 mT

Distance = 130 cm

We need to calculate the angle α

Using cosine law

[tex]120^2=130^2+50^2-2\times130\times50\cos\alpha[/tex]

[tex]\cos\alpha=\dfrac{120^2-130^2-50^2}{2\times130\times50}[/tex]

[tex]\alpha=\cos^{-1}(0.3846)[/tex]

[tex]\alpha=67.38^{\circ}[/tex]

We need to calculate the angle β

Using cosine law

[tex]50^2=130^2+120^2-2\times130\times120\cos\beta[/tex]

[tex]\cos\beta=\dfrac{50^2-130^2-120^2}{2\times130\times120}[/tex]

[tex]\beta=\cos^{-1}(0.923)[/tex]

[tex]\beta=22.63^{\circ}[/tex]

We need to calculate the force on 130 cm side

Using formula of force

[tex]F_{130}=ILB\sin\theta[/tex]

[tex]F_{130}=4\times130\times10^{-2}\times75\times10^{-3}\sin0[/tex]

[tex]F_{130}=0[/tex]

We need to calculate the force on 120 cm side

Using formula of force

[tex]F_{120}=ILB\sin\beta[/tex]

[tex]F_{120}=4\times120\times10^{-2}\times75\times10^{-3}\sin22.63[/tex]

[tex]F_{120}=0.1385\ N[/tex]

The direction of force is out of page.

We need to calculate the force on 50 cm side

Using formula of force

[tex]F_{50}=ILB\sin\alpha[/tex]

[tex]F_{50}=4\times50\times10^{-2}\times75\times10^{-3}\sin67.38[/tex]

[tex]F_{50}=0.1385\ N[/tex]

The direction of force is into page.

Hence, The magnitude of the magnetic force on each of the three sides of the loop are 0 N, 0.1385 N and 0.1385 N.

a. The magnitude of the magnetic force on the 130 cm side is 0 Newton.

b. The magnitude of the magnetic force on the 120 cm side is 0.1385 Newton.

c. The magnitude of the magnetic force on the 50 cm side is 0.1385 Newton.

Given the following data:

Current = 4.00 Amperes.Magnetic field strength = 75.0 mT = [tex]7.5 \times 20^{-3}\;T[/tex]Length = 130 cm to m = 1.3 mHypotenuse = 130 cmOpposite side = 120 cmAdjacent side = 50 cm

Let us assume the current is flowing in a counterclockwise direction in the right-angle triangle.

First of all, we would determine the angles by using cosine rule:

[tex]C^2=A^2 +B^2 - 2ABCos\alpha \\\\120^2=130^2 +50^2 - 2(130)(50)Cos\alpha\\\\14400 = 16900 + 2500 -13000Cos\alpha\\\\13000Cos\alpha=19400-14400 \\\\Cos\alpha=\frac{5000}{13000} \\\\\alpha = Cos^{-1}(0.3846)\\\\\alpha =67.38^\circ[/tex]

[tex]C^2=A^2 +B^2 - 2ABCos\beta \\\\50^2=120^2 +130^2 - 2(120)(130)Cos\beta \\\\2500 = 14400 + 16900 -31200Cos\beta\\\\31200Cos\alpha=31300-2500 \\\\Cos\beta=\frac{28800}{31200} \\\\\beta = Cos^{-1}(0.9231)\\\\\beta =22.62^\circ[/tex]

a. To the determine the magnitude of the magnetic force on the 130 cm side:

Mathematically, the force acting on a current in a magnetic field is given by the formula:

[tex]F = BILsin\theta[/tex]

Where:

B is the magnetic field strength.I is the current flowing through a conductor.L is the length of conductor.[tex]\theta[/tex] is the angle between a conductor and the magnetic field.

Substituting the given parameters into the formula, we have;

[tex]F_{130}=7.5 \times 20^{-3}\times 4 \times 1.3 \times sin(0)\\\\F_{130}=7.5 \times 20^{-3}\times 4 \times 1.3 \times0\\\\F_{130}=0\;Newton[/tex]

b. To the determine the magnitude of the magnetic force on the 120 cm side:

[tex]F_{120}=BILsin\beta[/tex]

[tex]F_{120}=7.5 \times 20^{-3}\times 4 \times 1.2 \times sin(22.62)\\\\F_{120}=7.5 \times 20^{-3}\times 4 \times 1.2 \times0.3846\\\\F_{120}=0.1385\;Newton[/tex]

c. To the determine the magnitude of the magnetic force on the 50 cm side:

[tex]F_{50}=BILsin\alpha[/tex]

[tex]F_{50}=7.5 \times 20^{-3}\times 4 \times 0.5 \times sin(67.38)\\\\F_{50}=7.5 \times 20^{-3}\times 4 \times 1.2 \times0.9231\\\\F_{50}=0.1385\;Newton[/tex]

Read more: https://brainly.com/question/13754413

In Young's 2-slit interference experiment, the wavelength of laser light can be determined. The two slits are separated by 0.16 mm. The screen is 1.4 m from the slits. It is observed that the second bright band is located 11 mm from the center of the pattern. Given this information, what is the wavelength of the laser light?

a. 1258 nm
b. 419 nm
c. 500 nm
d. 629 nm

Answers

Answer:

d. 629 nm

Explanation:

slit separation d = .16 x 10⁻³ m

distance of screen D = 1.4 m

distance of second bright band = 11 x 10⁻³

distance of second bright band = 2 x band width

= 2 x λ D /d

Putting the values given ,

11 x 10⁻³  = 2 x λ x 1.4 /  .16 x 10⁻³

λ = 1.76 x 10⁻⁶ / 2.8

= .6285 x 10⁻⁶

= 628.5 x 10⁻⁹

= 629 nm approx .

A 10-cm-long thin glass rod uniformly charged to 6.00 nC and a 10-cm-long thin plastic rod uniformly charged to - 6.00 nC are placed side by side, 4.4 cm apart. What are the electric field strengths E1 to E3 at distances 1.0 cm, 2.0 cm, and 3.0 cm from the glass rod along the line connecting the midpoints of the two rods?
A. Specify the electric field strength E1
B. Specify the electric field strength E2
C. Specify the electric field strength E3

Answers

Answer:

A) E(r) = 1.3957 × 10^(5) N/C

B) E(r) = 9.8864 × 10⁴ N/C

C) E(r) = 1.13 × 10^(5) N/C

Explanation:

We are given;

q = 6 nc = 6 × 10^(-9) C

L = 10 cm = 0.1 m

d = 4.4 cm = 0.044 m

r1 = 1 cm = 0.01 m

r2 = 2 cm = 0.02 m

r3 = 3 cm = 0.03 m

Formula for the electric field strength in this question is given as;

E(r) = q/(2π(ε_o)rL) + q/(2π(ε_o)(d - r)L)

When factorized, we have;

E(r) = q/(2π(ε_o)L) × [(1/r) + (1/(d - r))]

Plugging in the relevant values for q/(2π(ε_o)L)

We know that (ε_o) has a constant value of 8.854 × 10^(−12) C²/N².m

Thus; q/(2π(ε_o)L) = (6 × 10^(-9))/(2π(8.854 × 10^(−12)0.1) = 1078.53

Thus;

E(r) = 1078.52 [1/r + 1/(d - r)]

A) E1 is at r = 1 cm = 0.01m

Thus;

E(r) = 1078.52 (1/0.01 + (1/(0.044 - 0.01))

E(r) = 1.3957 × 10^(5) N/C

B) E2 is at r = 2 cm = 0.02 m

Thus;

E(r) = 1078.52 (1/0.02 + (1/(0.044 - 0.02))

E(r) = 9.8864 × 10⁴ N/C

C) E2 is at r = 3 cm = 0.03 m

Thus;

E(r) = 1078.52 (1/0.03 + (1/(0.044 - 0.03))

E(r) = 1.13 × 10^(5) N/C

What happens to the magnetic field when you reverse the direction of current by sliding the battery voltage bar past 0 volts

Answers

Answer:

The polarity of the magnetic field changes

Explanation:

This because The magnetic field generated is always perpendicular to the direction of the current and parallel to the solonoid. Hence if we reverse the current the direction of magnetism also reverses. In other words the magnetic poles gets reversed (North pole becomes south pole and the south pole becomes the north pole)

14 A particle of mass m strikes a vertical rigid wall perpendicularly from the left with velocity v.
rigid wall
If the collision is perfectly elastic, the total change in momentum of the particle that occurs as a
result of the collision is
A. 2mv to the right.
B. 2my to the left.
C. my to the right.
D. my to the left.​

Answers

Answer:

C. mv to the right

Explanation:

momentum of thr particle=m1v1

momentum of the wall=m2v2

m1v1+ m2v2 =m1u1+ m2u2 since the wall doesn't move it's momentum is zero.

m1v1 =m1u1

therefore change in that occurs as result of the collision is C. mv to the right

The total change in momentum of the particle of mass m that collides elastically with a vertical rigid wall perpendicularly from the left with velocity v is 2mv to the left (option B).  

The total change in momentum is given by:

[tex] \Delta p = p_{f} - p_{i} [/tex]  

In the initial state, the particle is moving to the right until it collides with the rigid wall, so:

[tex] p_{i} = mv [/tex]

In the final state, the particle moves backward after the collision with the wall, so:

[tex] p_{f} = -mv [/tex]  

The minus sign is because it is moving in the negative x-direction (to the left)

Hence, the total change in momentum is:

[tex] \Delta p = -mv - mv = -2mv [/tex]

Therefore, the total change in momentum of the particle is 2mv to the left (option B).

Find more here:

https://brainly.com/question/6391301?referrer=searchResultshttps://brainly.com/question/24592032?referrer=searchResults

I hope it helps you!

Rod cells in the retina of the eye detect light using a photopigment called rhodopsin. 1.8 eV is the lowest photon energy that can trigger a response in rhodopsin. Part A What is the maximum wavelength of electromagnetic radiation that can cause a transition

Answers

Answer:

The maximum wavelength of the e-m wave is 6.9 x 10^-7 m

Explanation:

Energy required to trigger a response = 1.8 eV

we convert to energy in Joules.

1 eV = 1.602 x 10^-19 J

1.8 eV = [tex]x[/tex] J

[tex]x[/tex] = 1.8 x 1.602 x 10^-19 = 2.88 x 10^-19 J

The energy of an electromagnetic wave is gotten as

E = hf

where

h is the Planck's constant = 6.63 x 10^-34 J-s

and f is the frequency of the wave.

substituting values, we have

2.88 x 10^-19 = 6.63 x 10^-34 x f

f = (2.88 x 10^-19)/(6.63 x 10^-34)

f = 4.34 x 10^14 Hz

We know that the frequency of an e-m wave is given as

f = c/λ

where

c is the speed of light = 3 x 10^8 m/s

λ is the wavelength of the e-m wave

From this we can say that

λ = c/f

λ = (3 x 10^8)/(4.34 x 10^14)

λ = 6.9 x 10^-7 m

Magnetic resonance imaging needs a magnetic field strength of 1.5 T. The solenoid is 1.8 m long and 75 cm in diameter. It is tightly wound with a single layer of 1.50-mm-diameter superconducting wire.
What current is needed?

Answers

Answer:

The current needed is 1790.26 A

Explanation:

Given;

magnitude of magnetic field, B = 1.5 T

length of the solenoid, L = 1.8 m

diameter of the solenoid, d = 75 cm = 0.75 m

The magnetic field is given by;

[tex]B = \frac{\mu_o NI }{L}[/tex]

Where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

I is current in the solenoid

N is the number of turns, calculated as;

[tex]N = \frac{Length \ of\ solenoid}{diameter \ of \ wire} \\\\N = \frac{1.8}{1.5*10^{-3}} =1200 \ turns[/tex]

The current needed is calculated as;

[tex]I = \frac{BL}{\mu_o N} \\\\I = \frac{1.5 *1.8}{4\pi *10^{-7} *1200} \\\\I = 1790.26 \ A[/tex]

Therefore, the current needed is 1790.26 A.

Answer:

I = 1790.5 A

Explanation:

The magnetic field due to a solenoid is given by the following formula:

B = μ₀NI/L

where,

B = Magnetic Field Required = 1.5 T

μ₀ = 4π x 10⁻⁷ T/A.m

L = length of Solenoid = 1.8 m

I = Current needed = ?

N = No. of turns = L/diameter of wire = 1.8 m/1.5 x 10⁻³ m = 1200

Therefore,

1.5 T = (4π x 10⁻⁷ T/A.m)(1200)(I)/1.8 m

I = (1.5 T)(1.8 m)/(1200)(4π x 10⁻⁷ T/A.m)

I = 1790.5 A

What do we call a substance in
which two or more elements are
chemically bonded

Answers

Answer:

A compound

Explanation:

A compound is a substance formed when two or more elements are chemically joined

Answer:

Compound

Explanation:

A compound is a substance derived from the chemical combination of two or more elements

e.g Water ;

= [tex]H_2O\\Hydrogen\:and\:Oxygen[/tex]

Salt ;

[tex]NaCl\\Sodium\:and\: Chlorine[/tex]

Calculate the answers to the appropriate number of significant
12.21 x 9.19 =

Answers

the answer for 12.22 times 9.29 is 112.2099
Other Questions
Circle12Circle the most reactive metal in each set.1) Magnesium / Potassium2) Aluminum / Gold3) Cobalt / Cesium / Calcium4) Iron / Titanium / Potassium5) Francium / Lithium / Beryllium n your own words define employment-at-will and explain whether or not you agree with this principle. Next, discuss your thoughts on workplace testing and its role in the hiring process. Do you feel this is a fair hiring practice? Why or why not? Keith and his team,employees of an online retailing company,are being trained on cyber surveillance and user security.As part of their training,they are working to identify a solution to the problem of cyber-phishing and data breaches.Which of the following forms of group-building methods is being employed by Keith's team?A) Cross-learningB) Action learningC) Adventure learningD) Virtual realityE) Behavior modeling ____ are thought to be present before vertabrates A parabola has an x-intercept of -1, a y-Intercept of -3, and a minimum of -4 at x = 1.Which graph matches this description? Beth is planning a playground and has decided to place the swings in such a way that they are the same distance from the jungle gym and the monkey bars. If Beth places the swings at point D, how could she prove that point D is equidistant from the jungle gym and monkey bars? what expression is equivalent to this Expression? (-5cd-4)(2cd2)2 Kids should have homework because it can help them get a good college. Counterargument What is the answer?? c 10 15 The only force acting on a 3.4 kg canister that is moving in an xy plane has a magnitude of 3.0 N. The canister initially has a velocity of 2.5 m/s in the positive x direction, and some time later has a velocity of 4.8 m/s in the positive y direction. How much work is done on the canister by the 3.0 N force during this time Helpp me pleaseeeeee In managing its Euro Disneyland operations, what are three mistakes that the company made? Explain. A rod bent into the arc of a circle subtends an angle 2 at the center P of the circle (see below). If the rod is charged uniformly with a total charge Q, what is the electric field at P? (Assume Q is positive. For the magnitude, use the following as necessary: 0, Q, R, and .) Choose the correct words to complete the sentences.The workers followed into the corn field___. They would all help with the____today. Discuss how our attitudes are formed. Can Attitudes be changed? If so, how can we change our attitudes? Someone PLEASE help! X5x 3y = -204x + 5y = -2 Rahman stock just paid a dividend of $3.00 per share. Future dividends are expected to grow at a constant rate of 6% per year. What is the value of the stock if the required return is 12% A segment with endpoints at $A(2, -2)$ and $B(14, 4)$ is extended through $B$ to point $C$. If $BC = \frac{1}{3} \cdot AB$, what are the coordinates for point $C$? Express your answer as an ordered pair. How is a topic different from A theme?