Pedaling forward over the bike with the increase in your applied force would decrease your acceleration. Thus, option B is correct.
What is acceleration?Acceleration is define as the rate at which velocity changes with time, in terms of both speed and direction. The equation for acceleration is:
a=F/m
where, a = acceleration,
F = force applied
m = mass of the object
The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object.
As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.
Therefore, if you are pedaling forward on your bike then a increase in your applied force would decrease your acceleration. Thus, option B is correct.
Learn more about acceleration here:
https://brainly.com/question/980919
#SPJ5
Answer:
I just did it. A is right.
Explanation:
A vector points -43.0 units along the x axis, and 11.1 units along the y axis. Find the Direction of the vector.
Answer:
Explanation:
The direction of the vector implies only its angle, not its magnitude. The direction of the vector is found in
[tex]tan^{-1}(\frac{y}{x})[/tex] so
[tex]tan^{-1}(\frac{11.1}{-43.0})=-14.5[/tex] but since we are in QII (where x is negative and y is positive) we have to add 180 to this number to get a direction of 165.5 degrees
Imagine using brainly LOL COULDNT BE ME XD
Answer:
LOL! couldnt be me either bestieeeee
Answer:
-_-
Explanation:
i dont know What was XD??
An object is free falling near the surface of the earth. At a certain instant in time, it is falling downward at a rate 25.0 m/s. After 2.5 seconds, what are its acceleration and velocity?
Answers:
acceleration = 9.81 m/s^2velocity = 49.5 m/sThe values are approximate.
==========================================================
Explanation:
When near the surface of the earth, the acceleration of gravity is roughly 9.81 m/s^2. This means that after each second passes, the velocity increases by roughly 9.81 m/s.
After 2.5 seconds, the velocity increases by 2.5*9.81 = 24.525 m/s = 24.5 m/s
If it was already going 25.0 m/s, then it bumps up to 25.0+24.5 = 49.5 m/s which is also approximate.
The acceleration of gravity stays the same when the object is close to the surface of the earth, so it stays at roughly 9.81 m/s^2
Side note: I'm ignoring air resistance (aka air friction or drag) since that greatly complicates things, and we would need to know the shape and surface area of the object. The material type would also be relevant info as well.
An electron experiences a downward force of 12.8×10-19 N while traveling in a magnetic field of 8×10-5 T west, what is the magnitude of the velocity?
Answer:
[tex]v=10^5\ m/s[/tex]
Explanation:
Given that,
Magnetic force acting on an electron, [tex]F=12.8\times 10^{-19}\ N[/tex]
The magnitude of the magnetic field,[tex]B=8\times 10^{-5}\ T[/tex]
We need to find the magnitude of the velocity. We know that the magnetic force is given by :
[tex]F=qvB[/tex]
Where
v is the velocity
So,
[tex]v=\dfrac{F}{qB}\\\\v=\dfrac{12.8\times 10^{-19}}{1.6\times 10^{-19}\times 8\times 10^{-5}}\\\\v=10^5\ m/s[/tex]
So, the magnitude of velocity is[tex]10^5\ m/s[/tex].
Which symbol and unit of measurement are used for electric current?
symbol. A, unit: 1
symbol: C, unit: A
symbol l; unit C
symbol: 1; unitA
Answer: Symbol is I and unit A
Explanation: A represents Amperes
HOPE THIS HELPS!!!!!!!!
Light of wavelength 530.00 nm is incident normally on a diffraction grating, and the first‑order maximum is observed to be 33.0∘ from the normal. How many slits per millimeter are marked on the grating?
Answer:
1028 slits/mm
Explanation:
We are given that
Wavelength of light, [tex]\lambda=530nm=530\times 10^{-9} m[/tex]
1nm=[tex]10^{-9} m[/tex]
[tex]\theta=33^{\circ}[/tex]
n=1
We have to find the number of slits per mm are marked on the grating.
We know that
[tex]dsin\theta=n\lambda[/tex]
Using the formula
[tex]dsin33^{\circ}=1\times 530\times 10^{-9}[/tex]
[tex]d=\frac{530\times 10^{-9}}{sin33^{\circ}}[/tex]
[tex]d=9.731\times 10^{-7} m[/tex]
1m=[tex]10^{3}mm[/tex]
[tex]d=9.731\times 10^{-7}\times 10^3[/tex]mm
[tex]d=0.0009731mm[/tex]
Number of slits=[tex]\frac{1}{d}[/tex]
Number of slits=[tex]\frac{1}{0.0009731}[/tex]/mm
Number of slits=1028/mm
Hence, 1028 slits/mm are marked on the grating.
Answer:
1027.6 lines per mm.
Explanation:
wavelength = 530 nm
order, m= 1
Angle = 33 degree
Let the slits per mm is 1/d.
So,
[tex]m \lambda = d sin A\\\\1\times 530\times 10^{-6} = d sin 33\\\\\frac{1}{d} = 1027.6 lines per mm[/tex]
What what is the change in internal energy if 500 joule of heat is added to a system and 125 joule of work are done on a system
Answer:
DU = 375 Joules
Explanation:
Given the following data;
Quantity of heat = 500 Joules
Work done = 125 Joules
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.Q is the quantity of energy.W is the work done.Substituting into the formula, we have;
DU = 500 - 125
DU = 375 Joules
A wire, 20m long, is heated from a temperature of 5°C to 55°C. If the change in length is 0.020m, calculate the linear expansivity of the wire.
Answer:
0.01998⁰C;¹
Explanation:
you can see all steps in photo
Kevin used a pulley to lift a piano to the third floor of his apartment. His input work was 12,000 J and the output work was 10,000 J. What was the mechanical efficiency of the pulley?
A . 50%
B. 83.3%
C . 120%
D. 16.7%
Answer:
B
Explanation:
Eff = output work/input work ×100
Hence, Eff = 10000/12000 × 100
Eff = 83.3%
A basketball is shot by a player at a height of 2.0 m. The initial angle
was 53° above horizontal. At the highest point the ball was travelling 6
m/s. If he scored (the ball went through the rim that is 3.00 m above the
ground), what was the player’s horizontal distance from the basket?
Answer:
The answer is "8.28 m".
Explanation:
[tex]\to u \cos 53^{\circ}=6 \ \text{therefore the horizontal velocity is constant alaways}\\\\\therefore[/tex]
[tex]u= \frac{6 \times 5}{3}= \frac{30}{3}= 10\ \frac{m}{s}\\\\[/tex]
In the projectfile when vertical displacement is 1 then 5 m comes at farther sides
Using
[tex]S=ut-\frac{1}{2} gt^2\\\\1=u\sin 53^{\circ}\times t-5t^2\\\\1=8t-5t^2\\\\5t^2-8t+1=0\\\\ t=\frac{8\pm \sqrt{64-20}}{10} \\\\=\frac{8\pm 2\sqrt{11}}{10} \\\\t_2=\frac{8+2\sqrt{11}}{10} \\\\[/tex]
[tex]Distance=u \cos 53^{\circ}\times t_2\\\\[/tex]
[tex]=6 \times \frac{8\pm 2\sqrt{11}}{10} \\\\=\frac{24\pm 6\sqrt{11}}{5} \\\\= 8.28 \ m[/tex]
Which object has potential energy but not kinetic energy?

A.
A battery in a pair of headphones

B.
A person riding an elevator upward

C.
A person climbing a ladder

D.
A car that is slowing down
Answer:
A.
A battery in a pair of headphones
Explanation:
Potenial energy - the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors.
A 20-N force acts on a 5-kg object at rest. How fast will
the object accelerate on a frictionless surface?
A. 15 m/s^2
B. 25 m/s^2
C. 4 m/s^2
D. 100 m/s^2
Answer:
C.
Explanation:
Force = Mass * Acceleration
So 20 = 5* Acceleration
4 = Acceleration
The acceleration of the object is 4 m/s².
To find the acceleration, the given values are:
Force = 20 N
Mass = 5 kg
Define acceleration.Definition:
As it was given as the values of Force and mass, here acceleration definition depends on the Newton's second law of motion.
Using the second law of motion, the force will be equal to the product of the mass and the acceleration.
As formula,
F = ma Newton
Here, to find acceleration,
a =f/ m
Substituting the values,
= 20 / 5
a = 4m/s².
So, the acceleration was 4 m/s². The Option C is the correct answer.
Learn more about acceleration,
https://brainly.com/question/12550364
#SPJ6
newtons second law lab report link
Answer:
ghittu iihg उह्स उउह्स उग्य्किव जिक्ह्ब
20 kg rodsis on the edge of a 80 m high de What is the rodes gracional potencial energy?
Answer:
Gpe = 15680 Joules
Explanation:
Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.
Mathematically, gravitational potential energy is given by the formula;
G.P.E = mgh
Where;
G.P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
Given the following data;
Mass = 20 kg
Height = 80 m
We know that acceleration due to gravity is equal to 9.8 m/s²
To find the gravitational potential energy;
Gpe = mgh
Gpe = 20 * 80 * 9.8
Gpe = 15680 Joules
You are trying to hold your 550 g physics books with your hand against a vertical wall. Using a force sensor you know that the force you are applying is 10.0 N. Below the book on the floor you have placed a motion sensor. The position time graph for the book is given. Find the coefficient of kinetic friction.
The book's position is changing linearly with time, so its velocity is constant. This means that the net force acting on the book in the direction parallel to the surface is
∑ F = 10.0 N - n = 0
where n is the magnitude of the normal force on the book due to the wall, and the net force perpedicular to the surface is
∑ F = f - (0.550 kg) g = 0
where f is the mag. of kinetic friction, and f = µn where µ is the coefficient of kinetic friction.
Then
• n = 10.0 N
• f = (0.550 kg) g = 5.39 N
• 5.39 N = µ (10.0 N)
==> µ = 0.539
Answer:
Above answer
Explanation:
The book's position is changing linearly with time, so its velocity is constant. This means that the net force acting on the book in the direction parallel to the surface is
∑ F = 10.0 N - n = 0
where n is the magnitude of the normal force on the book due to the wall, and the net force perpedicular to the surface is
∑ F = f - (0.550 kg) g = 0
where f is the mag. of kinetic friction, and f = µn where µ is the coefficient of kinetic friction.
Then
• n = 10.0 N
• f = (0.550 kg) g = 5.39 N
• 5.39 N = µ (10.0 N)
==> µ = 0.539
the direction of applied force has to be_____ to the distance in order to say work is done
Answer:
Explanation:
The direction of the applied force has to be parallel to the distance an object moved in order to say that work has been done.
A stone is thrown vertically upwards with an initial velocity of 20m/sec. Find the maximum height ot reaches and the time taken by it to reach the height. (g=10m/s2)
plz short numerical ASAP
Answer:
The height reached is 20m, The time taken to reach 20m is 2 seconds
Explanation:
Observing the equations of motion we can see that the following equation will be most helpful for this question.
[tex]v^{2} = u^{2} + 2as[/tex]
We are given initial velocity, u
We know that the stone will stop at its maximum height, so final velocity, v
Acceleration, a
And we are looking for the displacement (height reached), s
Substitute the values we are given into the equation
[tex]0^{2} = 20^{2} + 2(10)s[/tex]
Rearrange for s
[tex]0^{2} -20^{2} =20s[/tex]
[tex]-400=20s[/tex]
[tex]\frac{-400}{20} =s[/tex]
s = -20 (The negative is just showing direction, it can be ignored for now)
The height reached is 20m
Use a different equation to find the time taken
[tex]s = vt - \frac{1}{2} at^{2}[/tex]
Substitute in the values we have
[tex]-20=(0)t - \frac{1}{2} (10)t^{2}[/tex]
Rearrange for t
[tex]-20 =0 -5 t^{2}[/tex]
[tex]\frac{-20}{-5} =t^{2}[/tex]
[tex]4 = t^{2}[/tex]
t = 2s
The time taken to reach 20m is 2 seconds
16 100 g of water at 25 °C is poured into an insulating cup. 50 g of ice at 0 °C is added to the water.
The water is stirred until the temperature of the water has fallen to 0°C.
18 g of ice remains unmelted.
The specific heat capacity of water is 4.2 J /g °C.
Which value does this experiment give for the specific latent heat of fusion of ice?
Answer:
Q = Q
mcT = ml
100 x 4.2 x 25 = (50-18) l
l = 328
*Hope it helps*
The specific latent heat of fusion of the melted ice is 328.13 J/kg.
Conservation of energy
The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;
Heat lost by the water = Heat gained by the ice
McΔθ = mL
where;
c is specific heat capacity of waterL is pecific latent heat of fusion of icem is mass of melted ice = 50 g - 18 g = 32 g(100)(4.2)(25) = (32)L
32L = 10500
L = 328.13 J/kg
Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.
Learn more about heat capacity here: https://brainly.com/question/16559442
Mike lives in the northern United States minnesota and nick lives in the southern United States Louisiana. When they both feel insulted by the same individual, nick will be more
Complete question is;
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana). When they both feel insulted by the same individual, Nick will be more likely to have a(n) ________ cortisol response and show ________ levels of physical aggression.
Answer:
- A hyper cortisol response
- higher levels of physical aggression
Explanation:
In study of hormones in the human body, it has been discovered that cortisol is a stress inducing hormone. Now, if they are in the summer when it is hot, it has been proven that's when the cortisol hormone circulates in a very large manner in the blood. This leads to frustration and as well possibly physical aggression.
Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
What is cortisol?Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body.
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana).
When they both feel insulted by the same individual, Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
Cushing syndrome is a condition characterized by elevated cortisol levels. This disorder is caused by your body producing too much cortisol.
Similar symptoms can occur after large doses of corticosteroids, thus this should be cleared out before testing for crushing syndrome.
Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body. Now, if they are in the summer when it is hot.
It has been proved that the cortisol hormone circulates in the blood in a very significant amount. This causes irritation and, in some cases, physical aggressiveness.
Hence nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
To learn more about cortisol refer to the link
https://brainly.com/question/7519944
un litro de un gas es calentado a presión constante desde 20°C hasta 60°C que volumen final ocupará dicho gas?
Answer:
Final volume, V2 = 3 Litres
Explanation:
Given the following data;
Initial volume, V1 = 1 litre
Initial temperature, T1 = 20°C
Final temperature, T2 = 60°C
To find the final volume, we would use Charles' law;
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
V1/T1 = V2/T2
Making V2 as the subject formula, we have;
V1T2 = V2T1
V2 = (V1T2)/T1
Substituting into the formula, we have;
V2 = (1 * 60)/20
V2 = 60/20
Final volume, V2 = 3 Litres
25)Two forces are acting on a block in opposite directions as shown in the figure above
(a) Calculate the net force acting on the block.
(b) In which direction will the net force tend to move the object?
(c) Will any other force try to oppose the motion of the block?
[tex]\boxed{ \sf{Answer}} [/tex]
____________________
(a) A = 5 kgwt
B = 10 N
First convert 5 kgwt to N,
[tex]5 \times 9.8 \\ = 49 \: N[/tex]
Net force [the forces are acting in 2 opposite directions]
[tex]A - B \: \\ = 49 - 10 \\ = 39 \: N[/tex]
____________________
(b) Since, the force is greater by A ↦the block will move towards B, i.e, to the right.
____________________
(c) Frictional force will try to oppose the motion of the block but since A has greater force than B, the frictional force will be resisted.
____________________
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ ツ
꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
Which wave has the largest amplitude?
A.D
B.B
C.C
D.A
Answer:
D. A
General Formulas and Concepts:
Simple Harmonic Motion
Parts of a wave
PeriodAmplitudeWavelengthCrest/TroughExplanation:
The amplitude is the distance from the horizon to either the crest or trough of a wave.
In layman's terms, it is how high the wave is.
The "highest" wave would be wave A.
∴ our answer is D.
Topic: AP Physics 1 Algebra-Based
Unit: SMH
Answer:
A (The wave)
Explanation:
Wave A
Earth changes all the time making it a __ planet.
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
What is the difference between heat capacity and specific heat capacity? I want the meaning please.
Answer:
The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.
I hope it helps
A sample of nitrogen gas is inside a sealed container. The volume of the container decreases while the temperature is kept constant. This is a ________ process.
a) isothermal
b) constant-volume
c) adiabatic
d) isobaric
The Indianapolis speedway consists of a 2.5 mile track having four turns, each 0.25 mile long and banked at 9 12'
Answer: Your question is missing below is the question
Question : What is the no-friction needed speed (in m/s ) for these turns?
answer:
20.1 m/s
Explanation:
2.5 mile track
number of turns = 4
length of each turn = 0.25 mile
banked at 9 12'
Determine the no-friction needed speed
First step : calculate the value of R
2πR / 4 = πR / 2
note : πR / 2 = 0.25 mile
∴ R = ( 0.25 * 2 ) / π
= 0.159 mile ≈ 256 m
Finally no-friction needed speed
tan θ = v^2 / gR
∴ v^2 = gR * tan θ
v = √9.81 * 256 * tan(9.2°) = 20.1 m/s
A convex mirror of radius of curvature 1.6 m has an object placed at a distance of 1.0 m from it. Find the position of image and the magnification.
Answer:
The image is formed at 0.44 m in front of the mirror
magnification (M) = 0.44
Explanation:
Applying, mirror formular
1/f = (1/u)+(1/v).................... Equation 1
Where f = Focal length of the convex mirror, u = object distance, v = image distance.
Using the real is positive convection,
From the question,
Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m
Substitute these values into equation 1
-1/0.8 = (1/v)+(1/1)
Solve for v
1/v = 1.25+1
1/v = 2.25
v = 1/2.25
v = 0.44 m
Hence the image is formed at 0.44 m in front of the mirror
Magnification (M) = v/u
m = 0.44/1
m = 0.44
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
