Answer:
x^2+y^2=1
Step-by-step explanation:
Since cos^2(x)+sin^2(x)=1, x^2+y^2=1
create a graph of 4.95 + 3.99
Answer:
????
Step-by-step explanation:
as in y = 4.95 + 3.99 or points? if so just draw a horizontal line at 8.94
find the LCM of 210, 280, 360 by prime factorisation
Answer:
Step-by-step explanation:
210=2x3x5x7
280=2x2x2x5x7
360=2x2x2x3x3x5
Answer:
210= 2×3×5×7
280=2×2×2×5×7
360=2×2×2×3×3×5
common factors=2×2×2×3×5×7=840
uncommon factors=3
L.C.M=Common factors× uncommon factors
L.C.M=840×3
L.C.M=2520
Step-by-step explanation:
i hope it will be helpful
plzz mark as brainliest
What lines are parallel?
An adult can lose or gain two pounds of water ina course of a day. Assume that the changes in water weight isuniformly distributed between minus two and plus two pounds in aday. What is the standard deviation of your weight over a day?
Answer:
The standard deviation of your weight over a day is of 1.1547 pounds.
Step-by-step explanation:
Uniform probability distribution:
An uniform distribution has two bounds, a and b, and the standard deviation is:
[tex]S = \sqrt{\frac{(b-a)^2}{12}}[/tex]
Assume that the changes in water weight is uniformly distributed between minus two and plus two pounds in a day.
This means that [tex]a = -2, b = 2[/tex]
What is the standard deviation of your weight over a day?
[tex]S = \sqrt{\frac{(2 - (-2))^2}{12}} = \sqrt{\frac{4^2}{12}} = \sqrt{\frac{16}{12}} = 1.1547[/tex]
The standard deviation of your weight over a day is of 1.1547 pounds.
Four people share a taxi to the airport the fare was $36 and they gave the driver a tip equal to 25% of the fair. If they equally share the cost of the fair tip, how How much did each person pay?
Answer:
$11.25
Step-by-step explanation:
Total money given to the taxi driver=36+25% of 36=45
Each person will pay (45/4)=11.25
Rotation 90° counterclockwise around the origin of the point (-8,1)
The HCF of two numbers is 175. The LCM of these two numbers is 12600. Both numbers are greater than their HCF. Find the two numbers
Answer:
Hello,
Answer : 1400 and 1575
Step-by-step explanation:
Let's say a and b the ywo numbers
[tex]HCF(a,b)=a\vee b=175=5^2*7\\LCM(a,b)=a\wedge b=12600\\\\a*b=(a\vee b)*(a\wedge b)=(2^3*3^2*5^2*7)*(5^2*7)=2^3*3^2*(5^2*7^2)^2\\\\Both\ numbers\ are\ greater\ than\ their HCF\\a=175*k_1\\b=175*k_2\\\\k_1=2^3\ and\ k_2=3^2\\\\a=175*2^3=1400\\b=175*3^2=1575\\\\[/tex]
Devaughn is 6 years older than Sydney. The sum of their ages is 56 . What is Sydney's age?
Answer:
Devaughn = 31, Sydney = 25
Step-by-step explanation:
(56-6)÷2= 25
So they would both be 25 if they were the same age but Devaughn is 6 years older so 25+6=31
ATQ
[tex]\\ \sf\longmapsto x+x+6=56[/tex]
[tex]\\ \sf\longmapsto 2x+6=56[/tex]
[tex]\\ \sf\longmapsto 2x=56-6[/tex]
[tex]\\ \sf\longmapsto 2x=50[/tex]
[tex]\\ \sf\longmapsto x=\dfrac{50}{2}[/tex]
[tex]\\ \sf\longmapsto x=25[/tex]
I need help to fine the statement that is true
Answer:
option A
Step-by-step explanation:
wx and zy making 90 angle with each other therefore they are perpendicular.
wx and ab making 0 angle with each other therefore they are parallel
To study the mean respiratory rate of all people in his state, Frank samples the population by dividing the residents by towns and randomly selecting 12 of the towns. He then collects data from all the residents in the selected towns. Which type of sampling is used
Answer:
Cluster Sampling
Step-by-step explanation:
Cluster Sampling involves the random sampling of observation or subjects, which are subsets of a population. Cluster analysis involves the initial division of population subjects into a number of groups called clusters . From the divided groups or clusters , a number of groups is then selected and it's elements sampled randomly. In the scenario above, the divison of the population into towns where each town is a cluster. Then, the selected clusters (12) which are randomly chosen are analysed.
the ratio of sadia's age to her father's age is 3:6. The sum of their age is 96 .What is sadia's age
We have,
[tex]a:b=3:6,a+b=96[/tex]
Introduce variable [tex]x[/tex] such that [tex]a=3x,b=6x[/tex]
The sum [tex]a+b=96[/tex] is therefore [tex]9x=96\implies x=10.\overline{6}[/tex]
So,
[tex]a=3\cdot10.\overline{6}=\boxed{32}[/tex] (sadia's age)
[tex]b=6\cdot10.\overline{6}=\boxed{64}[/tex] (father's age)
Hope this helps :)
Which expression is equivalent to (3 squared) Superscript negative 2?
Answer:
–81
Step-by-step explanation:
Fill in the blanks.
(3b^3)^2 = _b^_
We can seperate (3b³) into two different parts, the constant and the variable.
The constant (3) and the variable (b) can both be squared and multiplied to get the correct answer, so:
3² = 9
(b³)² = [tex]b^{6}[/tex]
So, [tex](3b^{3})^{2} = 9b^{6}[/tex]
Hello Pls help and thanks
Answer:
c.) in the correct answer
if x+y=2 and x=4 then x+2y
The 4th of an AP is 15 and the 9th term is 35. find the 15th term
Consecutive terms in this sequence are separated by a constant c, so if the 4th term is 15, then the next terms would be
5th: 15 + c
6th: (15 + c) + c = 15 + 2c
7th: (15 + 2c) + c = 15 + 3c
and so on. More generally, since any given number in the sequence depends on the number that came before it, we can write the n-th term in terms of the 4th term,
n-th: 15 + (n - 4) c
Then the 9th term in the sequence is
15 + (9 - 4) c = 35
and solving for c gives
15 + 5c = 35 ==> 5c = 20 ==> c = 4
Then the 15th term would be
15 + (15 - 4)×4 = 15 + 11×4 = 15 + 44 = 59
Anna earned $9 an hour babysitting. She wants
to buy a 16 GB iPod that is $120. Anna has
saved $45 so far. How many more hours of
babysitting does she need to do to earn the rest
to purchase the iPod
Answer:
8.33 hours
Step-by-step explanation:
120-45 = 75
75 ÷ 9 = 8.33
(b) An economy has an agricultural industry and a textile industry. Each unit of agricultural output requires 0.4 unit of agricultural input and 0.1 unit of textiles input. Each unit of textiles output requires 0.1 unit of agricultural input and 0.2 unit of textiles input.
(i) Write the technology matrix for this economy. [2 marks]
(ii) If surpluses of 5 units of agricultural products and 195 units of textiles are desired, find the gross production of each industry
Leontief input output model (technology matrix) is an economic model that shows the quantitative relationship and sectorial interdependency in a national economy
The responses with regards to the question are;
(i) The technology matrix for the economy is presented as follows;
[tex]\mathbf{ A} =\left[\begin{array}{ccc}Agric&&Textile\\0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] \begin{array}{ccc}\mathbf{Per \ Unit}\\Agriculture\\\\Textile\end{array}\right][/tex]
(ii) The required gross production of each industry to meet the desired surplus are;
50 units of agriculture and 250 units of textile
The reason the above values are correct is as follows:
(i) The given parameters are;
The industries in the economy = Agricultural industry and textile industry
Units of agricultural input required per unit of agricultural output = 0.4
Units of textile input required per unit of agricultural output = 0.1
Units of agricultural input required per unit of textile output = 0.1
Units of textile input required per unit of textile output = 0.2
Let X represent agriculture, and let Y represent textile, we have;
[tex]Agric \ for \ agric = \dfrac{0.4 \ units \ of \ agriculture}{1\ unit \ of \ agric \ produced} \times X \ Agric \ produced= 0.4 \cdot X[/tex]
[tex]Agric \ for \ textile = \dfrac{0.1 \ units \ of \ agriculture}{1\ unit \ of \ textile \ produced} \times Y \ textile \ produced= 0.1 \cdot Y[/tex]
We also have;
Textile for agriculture = 0.1·X
Textile for textile = 0.2·Y
Therefore;
X = 0.4·X + 0.1·Y
Y = 0.1·X + 0.2·Y
Therefore;
The technology matrix for the economy is presented as follows;
[tex]\mathbf{Technology \ matrix, A} =\left[\begin{array}{ccc}Agric&&Textile\\0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] \begin{array}{ccc}\mathbf{Per \ Unit}\\Agriculture\\\\Textile\end{array}\right][/tex]
(ii) Let P represent the production vector, and let d represent the demand vector, we have;
[tex]P = \left[\begin{array}{c}X \\Y\end{array}\right][/tex], [tex]d = \left[\begin{array}{c}5 \\195\end{array}\right][/tex]
P = A·P + d
∴ P - A·P = d
Therefore;
[tex]P = \mathbf{ \dfrac{d}{(I - A)}}[/tex]
Where I = The 2 by 2 identity matrix
We get;
[tex]I - A =\left[\begin{array}{ccc}1&&0\\&&\\0&&1\end{array}\right] - \left[\begin{array}{ccc}0.4&&0.1\\&&\\0.1&&0.2\end{array}\right] = \mathbf{\left[\begin{array}{ccc}0.6&&-0.1\\&&\\-0.1&&0.8\end{array}\right]}[/tex]
With the use of a graphing calculator, we have;
[tex]P =\left[\begin{array}{c}X \\Y\end{array}\right] = \dfrac{\left[\begin{array}{c}5 \\195\end{array}\right]}{\left[\begin{array}{ccc}0.6&&-0.1\\&&\\-0.1&&0.8\end{array}\right]} = \left[\begin{array}{ccc}50\\\\\ 250\end{array}\right][/tex]
The required gross product of agriculture, X = 50 units
The required gross product of textile, Y = 250 units
Learn more about the Leontief input output model here:
https://brainly.com/question/15417573
We have that he technology matrix for this economy and the the gross production of each industry are
a) [tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]
b) [tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex]
From the Question we have told that
Each unit of agricultural output requires 0.4 unit of agricultural input
Each unit of agricultural output requires 0.1 unit of textiles input.
Each unit of textiles output requires 0.1 unit of agricultural input
Each unit of textiles output requires 0.2 unit of textiles input.
Generally the technology matrix for this economy is given below
With
X =Agricultural industry Gross output
Y= Textile industry Gross Output
Therefore
[tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]
b)
From the Question we are told that
Surpluses of 5 units of agricultural products and 195 units of textiles are desired.
Therefore, we have Desired surplus matrix of
[tex]D= \begin{vmatrix}5\\195\end{vmatrix}[/tex]
Generally the Technology equation is mathematically given as
[tex](I-X)\phi=D[/tex]
Where
X =Agricultural industry Gross output
I=A Unit matrix
\phi=Matrix of gross production
Therefore
[tex]\begin{vmatrix}1 & 0\\0 & 1\end{vmatrix}-(\begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}))\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}5\\195\end{vmatrix}[/tex]
[tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex]
In conclusion
The technology matrix for this economy and the the gross production of each industry are
[tex]X= \begin{vmatrix}0.4 & 0.1 \\0.1 & 0.2\end{vmatrix}[/tex]
[tex]\begin{vmatrix}A\\T\end{vmatrix}=\begin{vmatrix}50\\250\end{vmatrix}[/tex] Respectively
In conclusion
https://brainly.com/question/16863924
Solve each system by graphing.
Answer:
(2,-1)
Step-by-step explanation:
Solved using math.
Answer:
The solution is (2, -1) to show this by graphing do y = -1 by making a straight horizontal line at (0,-1) . And then for the other equation make a line where it starts at (0,4) and passes point (2,-1). Just plot those two points and connect them and you'll have made the line.
Step-by-step explanation:
What is the volume of a cone with a height of 6m and a diameter of 12m? Nearest meter.
Answer:
0.0005m^3
Step-by-step explanation:
V=1/3hπr²
h=6m
d=12m
r=12÷2=6m
V=1/3×6×(3.14)×36
V=1/2034.72
V=0.0005m^3
△DOG ~△?
Complete the similarity statement and select the theorem that justifies your answer.
**If they are not similar, select "none" for both parts
9514 1404 393
Answer:
nonenoneStep-by-step explanation:
The reduced side ratios, shortest to longest are ...
AC : AT : CT = 8 : 9 : 15
OD : OG : DG = 5 : 6 : 10
These are different ratios, so the triangles are not similar.
factorise m^2 - 12 m + 24
Answer:
(m-6+2root3)(m-6-2root3)
Step-by-step explanation:
m^2 - 12m +36 -12
= (m-6)^2 - 12
= (m-6+2root3)(m-6-2root3)[root 12 = 2root3]
solve the inequality y-6>/2y-4
Answer:
Step-by-step explanation:
Let's solve your inequality step-by-step.
y - 6 > 2y - 4
y - 2y > -4 + 6
-y > 2
now divide by -1 and inequality sign changes
-y/-1 < 2/-1
y < -2
PLEASE HELP ASAP
Solve the inequality [tex]\sqrt[3]{x+4} \ \textgreater \ \sqrt[2]{-x}[/tex]
A) x < 2
B) x > 2
C) x > –2
D) x < –2
Why wouldn't you use division to find an equivalent fraction for 7/15
Answer:
This depends whether you want to make the fraction bigger or smaller.
Step-by-step explanation:
If you want to the the fraction into something smaller than it already is, you would use division because when you divide something, you get a smaller number.
However, if you want to make the fraction bigger, then you would multiply.
Hope this helps! :)
Answer:
Because 7 is a prime number which means it can only divide by itself and one so you cannot divide seven but you can divide 15.
Step-by-step explanation:
If p is true and ~ q is false, then p ~ q is _____ false.
a. sometimes
b. always
c. never
100 x 20 + 30 help me
[tex]\boxed{\underline{\bf \: Answer}}[/tex]
[tex] \sf100 \times 20 + 30[/tex]
First multiply 100 & 20 together.
[tex] \sf= 2000 + 30[/tex]
Now add 2000 & 30. You'll get :-
[tex]= \boxed{ \bf 2030}[/tex]
____
Hope it helps.
RainbowSalt2222
[tex]\\ \rm\longmapsto 100\times 20+30[/tex]
[tex]\\ \rm\longmapsto (100\times 20)+30[/tex]
Solve bracket[tex]\\ \rm\longmapsto 2000+30[/tex]
[tex]\\ \rm\longmapsto 2030[/tex]
Let h(x)=20e^kx where k ɛ R (Picture attached. Thank you so much!)
Answer:
A)
[tex]k=0[/tex]
B)
[tex]\displaystyle \begin{aligned} 2k + 1& = 2\ln 20 + 1 \\ &\approx 2.3863\end{aligned}[/tex]
C)
[tex]\displaystyle \begin{aligned} k - 3&= \ln \frac{1}{2} - 3 \\ &\approx-3.6931 \end{aligned}[/tex]
Step-by-step explanation:
We are given the function:
[tex]\displaystyle h(x) = 20e^{kx} \text{ where } k \in \mathbb{R}[/tex]
A)
Given that h(1) = 20, we want to find k.
h(1) = 20 means that h(x) = 20 when x = 1. Substitute:
[tex]\displaystyle (20) = 20e^{k(1)}[/tex]
Simplify:
[tex]1= e^k[/tex]
Anything raised to zero (except for zero) is one. Therefore:
[tex]k=0[/tex]
B)
Given that h(1) = 40, we want to find 2k + 1.
Likewise, this means that h(x) = 40 when x = 1. Substitute:
[tex]\displaystyle (40) = 20e^{k(1)}[/tex]
Simplify:
[tex]\displaystyle 2 = e^{k}[/tex]
We can take the natural log of both sides:
[tex]\displaystyle \ln 2 = \underbrace{k\ln e}_{\ln a^b = b\ln a}[/tex]
By definition, ln(e) = 1. Hence:
[tex]\displaystyle k = \ln 2[/tex]
Therefore:
[tex]2k+1 = 2\ln 2+ 1 \approx 2.3863[/tex]
C)
Given that h(1) = 10, we want to find k - 3.
Again, this meas that h(x) = 10 when x = 1. Substitute:
[tex]\displaystyle (10) = 20e^{k(1)}[/tex]
Simplfy:
[tex]\displaystyle \frac{1}{2} = e^k[/tex]
Take the natural log of both sides:
[tex]\displaystyle \ln \frac{1}{2} = k\ln e[/tex]
Therefore:
[tex]\displaystyle k = \ln \frac{1}{2}[/tex]
Therefore:
[tex]\displaystyle k - 3 = \ln\frac{1}{2} - 3\approx-3.6931[/tex]
Which is a perfect square?
6’1
6’2
6’3
6’5
Answer:
6'2
Step-by-step explanation:
The answer pl shhaoksngausinxbbs pls
Answer:
D. 3
Step-by-step explanation:
A triangle can be defined as a two-dimensional shape that comprises three (3) sides, three (3) vertices and three (3) angles.
Simply stated, any polygon with three (3) lengths of sides is a triangle.
In Geometry, a triangle is considered to be the most important shape.
Generally, there are three (3) main types of triangle based on the length of their sides and these include;
I. Equilateral triangle: it has all of its three (3) sides and interior angles equal.
II. Isosceles triangle: it has two (2) of its sides equal in length and two (2) equal angles.
III. Scalene triangle: it has all of its three (3) sides and interior angles different in length and size respectively.
In Geometry, an acute angle can be defined as any angle that has its size less than ninety (90) degrees.
Hence, we can deduce that the greatest number of acute angles that a triangle can contain is three (3) because the sum of all the interior angles of a triangle is 180 degrees.
