Write the name of the alkene next to the drawing of the molecule.

Names include: 1-pentene, trans-2-pentene, cis-2-pentene, 1-propene, trans-2-butene, cis-2-butene

Answer:

oil floats on water because it is heavier than water

Salt is no longer visible after stirring as salt dissolves in water

by filtration

Solution:-1

[tex]\\ \sf\longmapsto E=hv[/tex]

Solution:-2

[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]

[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]

[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]

[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]

[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]

Now

[tex]\\ \sf\longmapsto E=hv[/tex]

[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]

[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]

Answer:

A system of measurement is a collection of units of measurement and rules relating them to each other. ... Systems of measurement in use include the International System of Units (SI), the modern form of the metric system, the British imperial system, and the United States customary system.

Explanation:

Hope it works!!!!

Answer:

Systems of measurement in use include the International System of Units (SI), the modern form of the metric system, the British imperial system, and the United States customary system.

Answer:

BIOHEAT is a biodiesel mix that can be utilized (without equipment changes) in most home heaters. BIOHEAT promptly diminishes various hurtful discharges from heater use (up to 80% contingent upon blend used) and the oil is made from nearby feedstocks like utilized cooking oil

Answer:

I hope that the link above will be helpful

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Explanation:

Your search - What is the answer to 9.7300x10^2+9.8700x 10^3 1.0843x 10^ in scientific notation - did not match any documents.

Suggestions:

Make sure that all words are spelled correctly.

Try different keywords.

Try more general keywords.

Try fewer keywords.

Answer:

6a - 6 - 2a + 4 = 3

4a - 2 = 3

4a = 3 + 2

4a = 5

a = 5/4

hope that helps ✌

Answer:

can you type question properly.

Answer: The given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 132.4 g

Molar mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 308.5 g/mol

Plugging values in equation 1:

[tex]\text{Moles of }Cd(NO_3)_2.4H_2O=\frac{132.4g}{308.5g/mol}=0.430 mol[/tex]

1 mole of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 1 mole of Cd, 2 moles of nitrogen atom (N), 10 moles of oxygen atom (O) and 8 moles of hydrogen atom (H).

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex](1\times 0.430) = 0.430mol[/tex] of Cd and [tex](2\times 0.430)=0.86mol[/tex] of N

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex]\frac{6.022\times 10^{23}}{1mol}\times 0.430mol=2.59\times 10^{23}[/tex] number of water molecules.

Hence, the given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Answer:

I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4

I hope this helps

Answer:

A

Explanation:

the nervous system helps parts of the body communicate.through nerves.

I hope this helps

Answer:

They show helixes and proteins

Explanation:

Ribbon diagrams are the Richardson diagrams that represent the protein structures. Chemist prefers using Ribbon diagrams to show the various structure of the proteins.

The Ribbon diagram is used to represent the structural organization of the protein in the polypeptide chains or individually. It shows the three-dimensional structure and organization of the protein framework.

The ribbon diagram for the secondary structure of the protein shows the intramolecular and intermolecular structure along with helixes and bonding. It shows the detailed structure of the protein organization including the helix and sheets.

Therefore, the ribbon diagram is used by chemists to determine the structure of the protein as they give the details about the helix and sheet.

Learn more about ribbon diagrams, here:

https://brainly.com/question/2794632

#SPJ2

[tex]{\huge{\boxed{\sf{\pink{☛Answer࿐}}}}}[/tex]

༒HOPE SO IT HELPS YOU༒

༒MARK ME AS BRAINLIEST༒

Explanation:

it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1

Answer:

We are given that the ring is made up of 20 carrat gold. 20 carrat gold means 20 parts of gold and 4 parts of other metal (usually copper or silver). Thus, the percentage of gold in 20 carrat gold will be

= (20 / 24) X 100

= 83.333 %

We can now calculate the mass of gold in the ring. We are given that the ring weighs 300 mg. So, the mass of gold in ring will be

= (83.333 / 100) X 300

= 250 mg

Thus, the mass of gold in 300 mg of the ring is 250 mg.

Now the molar mass of gold is 197 g. This means that there are 6.023 X 1023 atoms of gold in 197g of gold. Thus

197g of gold = 6.023 X 1023 atoms of gold

1g of gold = (6.023 X 1023 ) / 197 atoms of gold

250 mg or 0.25g of gold = (6.023 X 1023 X 0.25) / 197 atoms of gold

= 7.643 X 1020 atoms of gold

Answer: 60 Grams of water are produced, because you can't get more than the amount that was in the original ice cube

Explanation:

Answer:

the reactants are carbon dioxide ,iron, oxygen

Answer:

Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.

The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

Given that;

Heat of hydration = ΔH solution – ΔH lattice energy

Where,

ΔH solution  = Heat of the solution

ΔH lattice energy = Lattice energy of the solution

The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent

From the formula above;

ΔH solution = Heat of hydration + ΔH lattice energy

Heat of hydration = [(-431) + (-499)] = -930 kJ/mol

ΔH solution = (-930) + (-1,036) = -1966  kJ/mol

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

https://brainly.com/question/13526282

Answer:

27.79 g to the nearest hundredth.

Explanation:

2Na + Cl2 ---> 2NaCl

Using the molar masses , the theoretical yield is:

46 g of Na yields  46 + 35.5*2 g NaCl

46 g ---> 117 g NaCl  so

11.5 g ----> 117 * 11.5 / 46 g NaCl

But, as the yield is 90%

the actual yield is 0.95 * 117 * 11.5 / 46

= 27.79 g.

Answer:

gshshs

Explanation:

bshsjskskehhshs

The copper metal is heated in the air.  The magnesium ribbon emits a brilliant light and magnesium oxide, which is white. When oxygen is passed over copper (in the presence of heat), an oxidation reaction occurs, resulting in the formation of black copper oxide. The greater change in mass observed when they start to burned.

Copper is a mineral and an element that is essential to our daily lives. It is a significant industrial metal due to its high ductility, malleability, thermal and electrical conductivity, and corrosion resistance. It is a necessary nutrient in our diet.

Metals are a class of materials that have high electrical and thermal conductivity, as well as malleability, ductility, and high light reflection. Copper (Cu), aluminium (Al), and other metals are examples.

The combustion of magnesium ribbon is a combined reaction. This is due to the fact that magnesium reacts with oxygen to form the single product magnesium oxide. When magnesium ribbon is burned in air, it reacts with the oxygen in the air to form magnesium oxide.

Thus, 3g of clean mg ribbon and 8g of clean copper metal were burnt separately in equal volume of air and both mass reacted completely with air the greater change in mass observed when they start to burned.

To learn more about copper metal, follow the link;

https://brainly.com/question/11992235

#SPJ2

An example of natural resource that is renewable is wind. Details about natural resources can be found below.

Natural resources are resources that cannot be exhausted i.e. can be replenished with time.

Examples of natural resources are as follows:

Therefore, an example of natural resource that is renewable is wind.

Learn more about natural resources at: https://brainly.com/question/15211198

#SPJ5

The natural resource that is renewable is wind. Therefore, option B is correct.

Renewable resources are natural resources that can be restocked or regenerated over a relatively short period of time, usually within a human lifetime. These resources are often contrasted with non-renewable resources, such as fossil fuels, which take millions of years to form and are finite in quantity.

Examples of renewable resources include solar energy, wind energy, hydroelectric power, geothermal energy, biomass, and tidal power.

These resources have the potential to provide energy and other materials indefinitely if used sustainably, making them an important part of efforts to move towards a more sustainable future. Therefore, option B is correct.

Learn more about renewable resources, here:

https://brainly.com/question/19604560

#SPJ5

Answer:

gypsum

Explanation:

gypsum is used to make plaster of Paris

Answer:

Simple squamous epithelium

This type of epithelia lines the inner surface of all blood vessels (endothelium), forms the wall of alveolar sacs in the lung and lines the body cavities (mesothelium). The primary function of simple squamous epithelia is to facilitate diffusion of gases and small molecules.

Explanation:

isme talk kro

Answer:

reactivity is NOT a physical property

Answer: broooo what is this

Explanation:

Answer:

I can't understand your language? can you write in English

I'm sorry

Answer:

D. electron

Explanation:

The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .