write the dissociation equation for lithium hydroxide (lioh, a strong base). use --> for a one way arrow or <--> for a two way arrow.

The He element is the one that is hardest to ionize.

The correct answer is He.

An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.

An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ1

The electron representation shows the electrons in the atoms as dots as in the image attached.

An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.

Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.

Learn more about electron dot:https://brainly.com/question/25929171

#SPJ1

Using CH3NH2 and CH3NH3Cl, one may simulate the blood's buffering properties. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer system.

Carbonic acid and sodium bicarbonate. Hint: Human blood has a buffer of bicarbonate anion (HCO3) and carbonic acid (H2CO3) to keep the blood's pH between 7.35 and 7.45. Blood pH values higher or lower than 7.8 or 6.8 can be fatal.

Bicarbonate anion and hydronium are in equilibrium with carbonic acid in this buffer. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer.

To know more about acid visit:-

brainly.com/question/28175742

#SPJ1

Answer:

CH3NH2 and CH3NH3Cl

Explanation:

Methylamine (CH3NH2) is an organic base. In order to produce a basic buffer solution similar to blood, we can combine this base with a soluble salt of its conjugate acid, such as CH3NH3Cl. The solution of KOH and H2O would not be a good buffer because KOH is a strong base. The solution of HF and NaF is a buffer, but the pKa of HF is about 3.2, which is far from the pH of blood, 7.4.

The vapor pressure of methanol at 4.2 oC is approximately 1.6 torr.

The Clausius-Clapeyron equation relates the vapor pressure of a substance at two different temperatures and its enthalpy of vaporization. The equation is:

ln(P2/P1) = (-ΔHvap/R)(1/T2 - 1/T1)

where;

We are given the enthalpy of vaporization for dimethyl ether, which is 27.5 kJ/mol. We are also given the vapor pressure of dimethyl ether at 34.6 ⁰C, which is 760 torr.

We want to find the vapor pressure of methanol at 4.2 ⁰C.

Let's choose the vapor pressure of dimethyl ether at 34.6 ⁰C as the first state, and the vapor pressure of methanol at 4.2 ⁰C as the second state. We can convert the temperatures to kelvin by adding 273.15:

T1 = 34.6 + 273.15 = 307.75 K

T2 = 4.2 + 273.15 = 277.35 K

We can plug in the values into the Clausius-Clapeyron equation:

ln(P2/760) = (-27.5×10^3 J/mol)/(8.314 J/(mol·K)) × (1/277.35 K - 1/307.75 K)

Simplifying:

ln(P2/760) = -5.721

Taking the exponential of both sides:

P2/760 = e^-5.721

Multiplying both sides by 760:

P2 = 1.65 torr (to the nearest tenth)

Learn more about vapor pressure here: https://brainly.com/question/4463307

#SPJ1

Na, or sodium, is the right response. Among the listed elements, sodium has the lowest IE1 value. The energy needed to remove one electron from a neutral atom when it is in the gaseous form is known as the first ionisation energy (IE1).

A soft, silvery-white, highly reactive metal that is a member of the periodic table's alkali metal family is sodium (Na). Its atomic mass is 22.99 and it has an atomic number of 11. Sodium is a crucial element used in many processes, such as making alloys, chemicals, and electrical parts. It is a frequent component of table salt (NaCl) and other nutritional sources and is also a necessary element for living things. In the human body, sodium regulates fluid balance, nerve transmission, and muscle contraction. However, consuming too much salt has been related to a number of illnesses, such as high blood pressure and cardiovascular disease.

Learn more about Na here:

https://brainly.com/question/24808943

#SPJ4

In geologic strontium isotopic analysis by ICP-MS, the use of a collision cell with CH3F helps reduce isobaric interference between 87Rb+ and 87Sr+.

The ability to quantify each element's distinct isotopes makes ICP-MS useful for laboratories looking to compare the ratio of two isotopes of an element or one particular isotope.

Only a few elements cannot be measured by ICP-MS: F and Ne (which cannot be ionized in an argon plasma), Ar, N, and O (which are present at high levels in the plasma and air), and H and He (which are below the mass range of the mass spectrometer).

To know more about strontium isotopic visit:-

https://brainly.com/question/2496592

#SPJ1

Atoms in 14 moles of cadmium are  84.3 × 10²³ atoms .This is taken out by mole concept via Avogadro number .

The Avogadro constant, also known as NA or L, is a proportionality factor that relates the number of constituent particles (typically molecules, atoms, or ions) in a sample to the amount of substance in that sample. It is a SI defining constant with the exact value of 6.02214076×10²³.  Stanislao Cannizzaro named it after the Italian scientist Amedeo Avogadro, who explained it four years after Avogadro's death at the Karlsruhe Congress in 1860.

to know more about Avogadro number , visit ;

brainly.com/question/11907018

#SPJ1

The answer for all natural hazards statements are 1. True, 2. Ture, 3. True, 4. True, 5. True, 6. True, 7. False.

Natural hazards are natural phenomena that can potentially cause harm or damage to humans, property, or the environment. These hazards are events that are caused by natural processes, such as geological, meteorological, hydrological, or biological processes. Natural hazards can range from relatively minor events, such as a small earthquake or a local flood, to catastrophic events, such as a volcanic eruption, a major earthquake, or a tsunami.

This statement is true. Natural hazards, such as earthquakes, hurricanes, floods, and wildfires, can cause a wide range of negative impacts on people and communities, including disruptions to daily life, damage to property, economic loss, and injury to people.

This statement is true. Natural hazards vary in their severity because they can occur in a range of magnitudes, from mild to extreme. The severity of a natural hazard event depends on various factors, such as the strength and duration of the event, the location and vulnerability of the affected population, and the preparedness and response capacity of the community.

This statement is true. Many natural hazards, such as earthquakes, hurricanes, and tornadoes, cause damage to property by exerting unbalanced forces on objects. These forces can cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.

This statement is true. Studying the most intense and impactful natural hazard events of the past can help scientists and communities better understand the possible intensity and damages of future hazards. This information can be used to improve preparedness, response, and recovery efforts.

This statement is true. Examining the historical record of natural hazard events can help scientists and communities predict how likely it is that a similar event will occur in the future. This information can be used to assess risk and inform decision-making.

This statement is true. Patterns in the locations, frequency, and intensity of past natural hazard events can help scientists and communities forecast future events. For example, if a certain area has experienced frequent earthquakes in the past, it is more likely to experience earthquakes in the future.

This statement is false. While records of past events can provide valuable information for predicting future hazards, scientists do not assume that the conditions that created those hazards in the past will remain the same in the future. They consider a wide range of factors, such as changes in climate, land use, and population density, that may affect the occurrence and impact of natural hazards.

To know more about hazard  visit:

https://brainly.com/question/28269548

#SPJ1

However, it is commonly approximated as 3.14159.

An irrational number is a number that cannot be expressed as a simple fraction or ratio of two integers. It is a non-repeating, non-terminating decimal. Examples of irrational numbers include pi (π), the square root of 2 (√2), and the golden ratio (∅).

In mathematics, a terminating decimal is a decimal number that has a finite number of digits after the decimal point, i.e., the decimal representation ends in a finite number of zeroes. For example, 0.75, 2.0, and 0.0625 are terminating decimals.

To know more about irrational visit :

https://brainly.com/question/15837135

#SPJ1

Gram-negative bacteria appear as pink/red under the microscope after counterstaining with safranin. In conclusion, the appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless.

The appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless. Gram staining is a common microbiological method that is used to differentiate bacteria into two categories: Gram-positive and Gram-negative. This differentiation is based on differences in the composition of their cell walls. Gram staining is used to identify bacteria and fungi by staining the samples with crystal violet and iodine, then decolorizing with ethanol and counterstaining with safranin. This method helps to determine the presence or absence of a thick layer of peptidoglycan in the cell wall of bacteria. In Gram-negative bacteria, the decolorizing agent, ethyl alcohol, remove the outer membrane, causing the crystal violet stain to be removed from the cell wall, therefore resulting in a colorless appearance. The alcohol also increases the permeability of the thin peptidoglycan layer, which makes the safranin stain visible in the cell wall of the bacteria.

To learn more about Gram-negative bacteria :

https://brainly.com/question/28985258

#SPJ11

The major organic product of an SN2 substitution reaction is an alkene, which may be either in retention or inversion of configuration relative to the original substrate.

The reaction you are asking about is an SN2 substitution reaction, in which a nucleophile (Nu) displaces a leaving group (LG) from a molecule with an alkyl halide substrate. The major organic product of this reaction will be an alkene, which has the same carbon chain as the alkyl halide substrate. Depending on the relative configuration of the substrate, the alkene product may be the same as the original substrate (retention) or have its configuration inverted (inversion). If stereochemistry is relevant to the question, then it should be specified in the answer.

To learn more about SN2 substitution :

https://brainly.com/question/29849583

#SPJ11

Answer:

See below.

Explanation:

The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is

1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²

The orbital diagram for the valence electrons of lead (Pb) is

↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓

s s p p p p d d

2 1 6 2 6 2 10 10

|||||||||

1 2 3 4 5 6 7 8

The notation ↑↓ represents a pair of electrons with opposite spins.

To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.

Answer: 1:1

Explanation:

Since Na trades place with Na it makes it 1:1

The quaternary structure of hemoglobin is responsible for the increased oxygen-carrying capacity and stability of the molecule. This structure allows hemoglobin to better transport oxygen throughout the body and is essential to life.

The structural change from myoglobin to hemoglobin includes an additional quaternary structure, which is the arrangement of two or more myoglobin subunits into a single, functional entity. This structural change allows for the cooperative binding of oxygen, meaning that the hemoglobin molecule can carry more oxygen than a single myoglobin molecule can. This is due to the increased surface area of the hemoglobin molecule, which provides more oxygen-binding sites. Additionally, the quaternary structure of hemoglobin increases the stability of the molecule, meaning it can better resist changes in pH or temperature. This is important because it allows hemoglobin to function in the wide range of temperatures and environments that are found within the human body.  

To learn more about Hemoglobin :

https://brainly.com/question/11102357

#SPJ11

The alkene that is most stabilized through hyperconjugation is 2-methylpropene. The correct option is (C).

Hyperconjugation is a type of resonance that involves the overlapping of an unshared electron pair on an atom, like carbon, with an adjacent sigma bond. In this case, the unshared electron pair on the methyl group of 2-methylpropene provides stabilization to the adjacent sigma bond, making it the most stabilized alkene through hyperconjugation.

The most stabilized alkene through hyperconjugation can be determined by analyzing the degree of substitution. The greater the number of alkyl groups attached to the carbon atoms of the double bond, the greater the degree of substitution and the greater the stability due to hyperconjugation. Hence, the answer to this question would be option C (2-methylpropene.), as it has the greatest degree of substitution and is thus the most stable through hyperconjugation.

Option A (1-butene) has only one methyl group attached to one carbon of the double bond, making it less stable than option C. Option B (2-butene) has two methyl groups attached to the same carbon atom of the double bond, resulting in a similar degree of substitution to option A. Option D (2-methyl-1-pentene) has a lesser degree of substitution than option C because the methyl group is attached to only one carbon atom of the double bond, while in option C, the methyl group is attached to a tertiary carbon atom.

Hence, option C , 2-methylpropene. is the most stabilized alkene through hyperconjugation because of its greater degree of substitution.

For more such questions on Hyperconjugation , Visit:

https://brainly.com/question/28031100

#SPJ11

The complete question is:

which of the following alkenes is most stabilized through hyperconjugation? select answer from the options below

A 1-butene

B 2-butene

C 2-methylpropene

D 2-methyl-1-pentene

Part 1: When a lightly inflated balloon is placed in a freezer, the temperature of the air molecules inside the balloon decreases. According to the kinetic molecular theory, the volume of a gas is directly proportional to its temperature. As the temperature of the air molecules inside the balloon decreases, the average kinetic energy of the air molecules also decreases, causing the gas to contract. This contraction leads to a decrease in the volume of the gas inside the balloon, which causes the balloon to shrink in size.

Part 2: If the balloon is instead kept outside in the sun for some time, the temperature of the air molecules inside the balloon will increase. According to the kinetic molecular theory, an increase in temperature leads to an increase in the average kinetic energy of the gas molecules, causing them to move faster and collide more frequently. This increased collision frequency leads to an increase in pressure, which causes the balloon to expand in size. Therefore, the balloon will most likely get bigger when it is exposed to the heat of the sun.

Answer:

simple answer

Explanation:

part 1: if the balloon's temperature decreases so does the air molecules within it. The gas contracts because it's in a seal place, causing the balloon to shrink.

part 2: the balloon is exposed to heat, so the temperature is obviously going to increase as well as the air molecules. Gas molecules are moving rapidly causing the balloon to expand.

The atom with the lowest first ionization energy is C (carbon). The order from highest to lowest is: e) Cl (chlorine) > d) P (phosphorus) > c) Ge (germanium) > b) C (carbon) > a) Ca (calcium).

The atom that would have the lowest first ionization energy is Ca (Calcium). The amount of energy that is required to remove the most loosely held electron from an isolated neutral gaseous atom to form a cation is called the first ionization energy. It is a measure of the stability of an atom. The ionization energy of an element is determined by the amount of energy required to remove an electron from its ground state. The ionization energy is a physical property of an element that varies across the periodic table. The element that has the lowest ionization energy is the most reactive and will most likely form cations.

Identify which of the following atoms would have the lowest first ionization energy. The given atoms are Ca, C, Ge, P, and Cl. Out of these atoms, Ca would have the lowest first ionization energy. The electronic configuration of Ca is 2, 8, 8, 2. Calcium belongs to group 2 and period 4 of the periodic table. It has 20 protons, 20 electrons, and 2 valence electrons. Because of its 2 valence electrons, it has a low ionization energy. The electronic configuration of Ca is most stable because of the presence of the 8 valence electrons in the outermost shell.

The electronic configurations of the other given atoms are:

C: 2, 4Ge: 2, 8, 18, 4P: 2, 8, 5Cl: 2, 8, 7

All of these elements have electrons that are either in the process of filling the valence shell or have already filled it. They have higher ionization energies because of this. Therefore, Ca would have the lowest first ionization energy.

For more such questions on ionization energy , Visit:

https://brainly.com/question/20658080

#SPJ11

The element in question here is E, and its chemical formula with oxygen is EO2.  the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Electronic configuration refers to the distribution of electrons among different energy levels and subshells of an atom. When E forms a compound with oxygen, it loses two electrons to form a cation with a 2+ charge. This cation is written as E2+ and has an electronic configuration of 1s²2s²2p⁶. The electronic configuration of E before it forms a compound with oxygen can be found by considering its position in the periodic table. E is in the third row and fourth column of the periodic table, which means that it has three energy levels and four valence electrons.

Therefore, its electronic configuration is 1s²2s²2p⁶3s²3p². When E forms a compound with oxygen, it loses two valence electrons from its outermost energy level, which is the third energy level in this case. This results in the formation of E2+ ions with an electronic configuration of 1s²2s²2p⁶. Thus, the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Know more about electronic configuration here:

https://brainly.com/question/29564763

#SPJ11

Answer:

Transcribed Image Text: Rank the following substances in order of increasing acid strength. (1 as least and 4 as most in acid strength) ✓ H₂Se ✓ HBr HI ✓ AsH3 Expert Solution

Explanation:

HOPE IT HELPS!!

The correct answer is "two molecules of ATP are needed to 'activate' glucose".

In the first step of glycolysis, glucose is converted into glucose-6-phosphate, which requires the input of ATP. This reaction is catalyzed by the enzyme hexokinase. Therefore, two molecules of ATP are used in the early steps of glycolysis to activate glucose and convert it into glucose-6-phosphate. In the later steps of glycolysis, four molecules of ATP are produced by substrate-level phosphorylation, but since two molecules of ATP were used in the beginning, the net production of ATP is only two molecules per glucose molecule.

It is also important to note that glycolysis is the first step of both aerobic and anaerobic respiration and can occur without oxygen being present. However, the subsequent steps of cellular respiration, such as the Krebs cycle and electron transport chain, require oxygen in aerobic respiration to produce more ATP.

What is an ATP?

ATP stands for Adenosine Triphosphate, which is a molecule that carries energy within cells. It is often referred to as the "energy currency" of the cell because it powers many cellular processes by releasing its stored energy when it is hydrolyzed to ADP (Adenosine Diphosphate) and inorganic phosphate.

To know more about ATP, visit:

https://brainly.com/question/174043

#SPJ1

Burning your mouth on a hot spoon(option D) is an example of heat transfer through conduction, as the spoon is in direct contact with your mouth.

Conduction is the transfer of heat or electrical energy between two objects that are in direct contact with each other, or between two parts of the same object that are at different temperatures.

In conduction, the energy transfer occurs due to the collision of molecules in the objects or materials. When two objects are in contact, the molecules of the warmer object vibrate more rapidly, colliding with the molecules of the cooler object, which have less energy.

These collisions transfer thermal energy from the warmer object to the cooler object, until both objects reach the same temperature.

Learn about conduction here https://brainly.com/question/20493362

#SPJ1

There is no limiting reactant because both reactants produce the same amount of products indicating that neither reactant is in excess and both are fully consumed in the reaction.

The limiting reagent is described as  the reactant that is completely used up in a reaction, and thus determines when the reaction stops.

calculating the number of moles of each reactant of the equation:

C2H4 + 3 O2 -> 2 CO2 + 2 H2O.

Moles of C2H4: not given, assume 1 mole

Moles of O2: 3 moles (given in the equation)

Moles of CO2 produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of H2O produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of CO2 produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

Moles of H2O produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

In conclusion, both reactants produce the same amount of products (2 moles of CO2 and 2 moles of H2O).

Learn more about limiting reagent at: https://brainly.com/question/30991317

#SPJ1

To convert the volume of Substance A to the volume of Substance B at STP, you can use the principle of molar volume, which states that one mole of any gas at standard temperature and pressure (STP) occupies a volume of 22.4 liters. Here are the steps:

Determine the number of moles of Substance A using its volume and molar volume at STP:

Number of moles of Substance A = Volume of Substance A / Molar volume at STP (22.4 L)

STP stands for "Standard Temperature and Pressure," which is a set of standard conditions used for measuring and comparing physical and chemical properties of gases.

The standard temperature is typically defined as 0 degrees Celsius (273.15 Kelvin), while the standard pressure is typically defined as 1 atmosphere (atm) or 101.325 kilopascals (kPa). At STP, one mole of any gas occupies a volume of 22.4 liters.

STP is commonly used in chemistry and physics to compare gas volumes, to determine molar masses, and to calculate other properties of gases. It is also useful for converting between different units of gas volume, pressure, and temperature.

To know more about STP visit :

https://brainly.com/question/29356493

#SPJ1

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

Mn3+, an ion of manganese(III), can function as an acid by giving a proton (H+) to a base. Here's an illustration: Mn3+ (aq) + 3OH- (aq) Mn(OH)3 (s)

There is no need to add an indicator because MnO4's vivid purple colour serves as one enough. In the conical flask, there is Fe2+. The Fe2+ solution is added, and the Fe2+ lowers the MnO4- to Mn2+. As Mn2+ is a colourless solution, the purple colour disappears.

The divalent metal cation manganese(2+) contains manganese as the metal. It plays the part of a cofactor. It consists of a monoatomic dication, a manganese cation, and a divalent metal cation.

To know more about cation visit:-

https://brainly.com/question/28710898

#SPJ1

The SI unit of pressure is the Pascal (Pa).

The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.

What is Pressure?

Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.

At lower elevations, atmospheric pressure is higher compared to higher elevations.

Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.

Learn more about Pressure from given link

https://brainly.com/question/28012687

#SPJ1

It's a negative value for ∆H°, indicating that the conversion of diamond to graphite releases energy. As a result, it is an exothermic reaction.

The conversion of diamond into graphite is exothermic. The enthalpy change of the reaction is -267.1 kJ.There are three reactions that take place in this process. Cdiamond (s) + O2 (g) → CO2(g) ∆H° = -395.4 kJ2 CO2 (g) → 2 CO(g)+O2 (g) ∆H° = 566.0 kJ2 CO2(g) → Cgraphite(s) + CO2 (g) ∆H° =-172.5 kJCdiamond (s) → Cgraphite (s) ∆H°= ?

The conversion of diamond to graphite is an endothermic process. It has a positive value of ∆H°. Therefore, the heat is absorbed by the surroundings. According to the first two reactions, the formation of CO and CO2 from the combustion of diamonds produces energy.

The net reaction for the conversion of diamond to graphite takes place as follows:

Diamond (s) + 2 O2(g) → Cgraphite (s) + 2 CO2 (g)

The energy change for this reaction can be determined by combining the above three reactions. The enthalpy change is obtained by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The enthalpy change of the reaction is calculated as follows:

∆H°=ΣH°(products)−ΣH°(reactants)

∆H°=(−172.5)+(2×−393.5)+(566.0)−[(0)+(0)+(-395.4)+(2×0)]

∆H°=−267.1 kJ

To learn more about Exothermic reaction :

https://brainly.com/question/2924714

#SPJ11

The percent ionization of the nitrous acid in the 0.036 M aqueous solution is 2.1%.

The osmotic pressure (π) of a solution can be related to the molar concentration (M) of the solute and the temperature (T) of the solution by the following equation:

π = MRT

Where R is the gas constant.

We can use this equation to calculate the molar concentration of the nitrous acid solution:

M = π / RT

M = (0.93 atm) / (0.0821 L·atm/(mol·K) x 298 K)

M = 0.036 M

This is the molar concentration of the undissociated nitrous acid in the solution. To calculate the percent ionization of the acid, we need to know the concentration of the H+ and NO2- ions in the solution.

The balanced chemical equation for the dissociation of nitrous acid is:

HNO2(aq) ⇌ H+(aq) + NO2-(aq)

Let x be the extent of ionization of the nitrous acid. Then the concentration of H+ and NO2- ions can be expressed in terms of x as follows:

[H+] = x M

[NO2-] = x M

The concentration of the undissociated nitrous acid is (1-x)M.

The expression for the equilibrium constant (Ka) of the reaction can be written as:

Ka = [H+] [NO2-] / [HNO2]

Substituting the concentrations in terms of x, we get:

Ka = x^2M / (1-x)M

Simplifying the above equation, we get:

Ka = x^2 / (1-x)

The percent ionization of the acid is the fraction of the original HNO2 molecules that dissociate into H+ and NO2- ions. It can be calculated as follows:

% ionization = (concentration of H+ ions) / (initial concentration of HNO2) x 100

% ionization = (x M) / (M) x 100

% ionization = x x 100

Substituting the value of x from the above equation for Ka, we get:

Ka = x^2 / (1-x)

x = sqrt(Ka / (1+Ka))

We can calculate the value of Ka using the standard reference value of the acid dissociation constant (Ka) for nitrous acid at 25°C, which is 4.5 x 10^-4.

x = sqrt(4.5 x 10^-4 / (1+4.5 x 10^-4))

x = 0.021

% ionization = 0.021 x 100

% ionization = 2.1%

Therefore, the percent ionization of the nitrous acid in the 0.036 M aqueous solution is 2.1%.

Learn more about osmotic pressure here : brainly.com/question/25413362

#SPJ1

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

The molarity of the unknown triprotic acid is 0.269M.

Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

The molarity of the unknown acid can be calculated using the following formula:

CaVa = CbVb

Where;

According to this question, the titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH to reach the endpoint.

45 × Ca = 32.71 × 0.37

45Ca = 12.1027

Ca = 0.269M

Learn more about molarity at: https://brainly.com/question/8732513

#SPJ1