Answer:
The program in Python is as follows:
A = int(input("A: "))
B = int(input("B: "))
C = int(input("C: "))
while A<=0 or B <= 0 or C <= 0:
A = int(input("A: "))
B = int(input("B: "))
C = int(input("C: "))
print("Valid inputs")
Explanation:
Get input for A, B and C
A = int(input("A: "))
B = int(input("B: "))
C = int(input("C: "))
The loop is repeated until inputs for A, B and C are above 0
while A<=0 or B <= 0 or C <= 0:
Get input for A, B and C
A = int(input("A: "))
B = int(input("B: "))
C = int(input("C: "))
Print valid inputs when user inputs are correct
print("Valid inputs")
Use the Internet to research external storage devices. Find at least three devices, with a minimum storage size of 1 terabyte (TB), from three different manufacturers. Write a paragraph, IN YOUR WORDS, for each device explaining the features and benefits. Provide the retail cost and include a reference link to each device. Next, write
Hi, you've asked an incomplete question. However, I provided suggestions on getting the desired information.
Explanation:
Considering the fact that you are required to find information about not just the cost, but also the features and benefits of three storage devices having a minimum storage size of 1 terabyte, it is recommended that you check this on a reputable e-commerce site (eg Amazon).
There you could find information about their features and benefits, as well as customer feedback about their experience using these devices.
what are the application areas of the computer ? list them.
Answer:
Home. Computers are used at homes for several purposes like online bill payment, watching movies or shows at home, home tutoring, social media access, playing games, internet access, etc. ...
Medical Field.
Entertainment.
Industry.
Education.
Government.
Banking.
Business.
In which generation of computers are we in?
If x=50.7,y=25.3 and z is defined as integer z,calculate z=x+y
Answer:
Ans: 76
Explanation:
z=x+y
=50•7 + 25•3
=76#
It's currently 1:00 in the afternoon. You want to schedule the myapp program to run automatically tomorrow at noon (12:00). What two at commands could you use
Answer:
at 12 pm tomorrow
at now +23 hours
Explanation:
The at command could be used in the command line to perform a scheduled command in Unix related systems. The at command coule be ua d to program a complex script or used to perform simple scheduled reminders.
The at command is initiated by first writing the at string followed by the condition or statement to be performed.
Currently (1:00 pm) ; To make a schedule for 12pm then that will be at noon the following day:
at 12:00 pm tomorrow
Or :
Using the number of hours between the current tone and the schedule time : 12 pm tomorrow - 1:00 pm today is a difference of 23 hours ;
Hence, it can be written as :
at +23 hours
If one wish to create a loop such that it will continuously add time elapsed between two functions with variable computation time until 1 hour is passed, what type of loop would be best
"Between two functions" not sure of what you mean there but here's a quick way to execute a function for an hour
Answer and Explanation:
var interval=setInterval(function(){
var i=0;
for (i=0; i <=60; i++){
for (i=0; i <70; i++){
console.log(i); }
}}, 60000);
Consider a system with seven processes: E, F, G, H, I, J, K and six resources: U, V, W, X, Y, Z. Process E holds U and wants V. Process F holds nothing but wants W. Process G holds nothing but wants V. Process H holds X and wants V and W. Process I holds W and wants Y. Process J holds Z and wants V. Process K holds Y and wants X. Is this system deadlocked?
a. Yes
b. No
Answer:
a. Yes
Explanation:
System is deadlock due to process HIK. Process H holds X and wants V and W. Process I holds W and wants Y. Process K holds Y and wants X. The system will become deadlock due to these three different processes.
A chain of dry-cleaning outlets wants to improve its operations by using data from
devices at individual locations to make real-time adjustments to service delivery.
Which technology would the business combine with its current Cloud operations
to make this possible?
O Edge Computing
O Blockchain
O Data Visualization
O Public Cloud
Select the correct statement(s) regarding PONS. a. only MMF cables can be used, since MMF enables greater data capacities compared to SMF b. PONS systems require active amplifiers, since high frequency signals attenuate quickly over distance c. PONS systems use passive devices between OLT and ONT d. all are correct statements
Answer:
The correct statement regarding PONS is:
c. PONS systems use passive devices between OLT and ONT
Explanation:
PON means Passive Optical Network. Based on fiber-optic telecommunications technology, PON is used to deliver broadband network access to individual end-customers. It enables a single fiber from a service provider to maintain an efficient broadband connection for multiple end-users (homes and small businesses). OLT means Optical Line Terminal, while ONT means Optical Network Terminal. They provide access to the PON.
which animal is the computer to store data information and instruction
Answer:
human is the answwr of the quest
This criterion is linked to a Learning OutcomeCreate checkDuplicates method that receives an array of ints, and an int as parameters. It will return true if the int is found in the array, and false if the int is NOT found in the array. Call the checkDuplicates method from both the MegaMillionsLottery constructor, and the getUserPicks() method.
Answer:
Explanation:
The MegaMillions Lottery class was not provided and neither was the getUserPicks() method. Since they were not found online either, I have created the checkDuplicates method so that it works standalone. Therefore, you can simply call the method from wherever you need by pasting the call line where it needs to be called. A test case has been created in the main method so that you can see the method in action. The output is seen in the attached image below.
public static boolean checkDuplicate(int[] myArr, int element) {
for (int x : myArr) {
if (x == element) {
return true;
}
}
return false;
}
the computer that process data that are represented in the form of discrete values are called
Answer:
Digital computer
Explanation:
The computer that process data that are represented in the form of discrete values are called digital computer.
Imagine you are trying to choose what restaurant to visit. You have a list of restaurants, each with a collection of star ratings. You also have a minimum standard; you will only go to a restaurant whose star rating is at least your minimum standard. Write a function called restaurant_rating. restaurant_rating has two parameters. The first is a dictionary, where the keys are restaurant names and the values are lists of ratings. The second parameter is your minimum rating. If a restaurant's average rating is above your minimum rating, you might visit it. If it is not, you won't. restaurant_rating should return a list of restaurants eligible for you to visit. That is, it should return a list of restaurant names from the dictionary whose average ratings (the average of the ratings in their lists) is greater than or equal to your minimum rating. This list should be sorted alphabetically. For example: rest_and_rating
Answer:
The function in Python is as follows:
def restaurant_rating(restaurants,minRatings):
restaurantList = []
for key in restaurants:
if restaurants[key] >= minRatings:
restaurantList.append(key)
restaurantList.sort()
return restaurantList
Explanation:
This declares the function
def restaurant_rating(restaurants,minRatings):
This initializes the list of eligible restaurants
restaurantList = []
This iterates through the restaurant dictionary
for key in restaurants:
If the ratings is greater than or equal to minimum ratings
if restaurants[key] >= minRatings:
The restaurant name is appended to the restaurant list
restaurantList.append(key)
Sort the eligible lists
restaurantList.sort()
Return the list
return restaurantList
GuardIN is an IT security firm. It deals with highly secure data for a wide variety of software and e-commerce agreements, trademark licenses, and patent licenses. GuardIN needs a cloud computing option that would allow it to purchase and maintain the software and infrastructure itself. The cloud also needs to be designed in such a way that all users of the organization can access it without any lag. Which cloud computing option would be most suitable for GuardIN?
Answer:
GuardIN is an IT security firm. It deals with highly secure data for a wide variety of software and e-commerce agreements, trademark licenses, and patent licenses. GuardIN needs a cloud computing option that would allow it to purchase and maintain the software and infrastructure itself. The cloud also needs to be designed in such a way that all users of the organization can access it without any lag. Which cloud computing option would be most suitable for GuardIN?
Explanation:
Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, which indicates a threshold. Output all integers less than or equal to that last threshold value. Assume that the list will always contain fewer than 20 integers.
Ex: If the input is
5 50 60 140 200 75 100
the output is
50 60 75
Answer:
The program in Python is as follows:
num = int(input())
numList = []
for i in range(num+1):
numInput = int(input())
numList.append(numInput)
for i in range(len(numList)-1):
if numList[i] <= numList[-1]:
print(numList[i],end=" ")
Explanation:
This gets input for the number of integers
num = int(input())
This initializes an empty list
numList = []
This iterates through the number of integers and gets input for each
for i in range(num+1):
numInput = int(input())
The inputs including the threshold are appended to the list
numList.append(numInput)
This iterates through the list
for i in range(len(numList)-1):
All inputs less than or equal to the threshold are printed
if numList[i] <= numList[-1]:
print(numList[i],end=" ")
When in global configuration mode, which steps are necessary to edit an ip address on an Ethernet interface?
Answer:
I. You should enter interface configuration mode.
II. Configure the IP address and subnet mask.
Explanation:
A node refers to the physical device that make up a network and are capable of sending, receiving, creating and storing data in communication.
Some examples of network nodes are modem, hubs, computer, switches, phone and printers.
In Computer networking, network devices such as routers and switches are usually configured (programmed) through the use of specific network commands commonly referred to as configs e.g show int description, config terminal (config t), show IP address, etc.
In Cisco devices, there are five (5) main types of command modes;
1. Sub-interface configuration mode.
2. Interface configuration mode.
3. Line configuration mode.
4. Router configuration method.
5. Global configuration mode.
Global configuration mode is a configuration mode that avail network engineers and end users with the ability to modify or edit the running (global) system configuration of a networking device. Thus, any change effected at the global configuration mode will affect the network device as a whole.
In global configuration mode, the steps which are necessary to edit an ip address on an Ethernet interface include;
I. You should enter interface configuration mode using the "configure terminal" command.
II. Configure the IP address and subnet mask.
See an example below;
"Router(config-if)# IP address 192.168.1.2 255.255.255.0"
What is garbage in garbage out?
Answer: it means if you give a bad input it will result in a ad output.
Explanation:
It has n acronym GIGO which refers to how the quality of an output is determined by the quality of input.
Garbage is trash info... or input. And grabage out is the trash output.
There is an interface I that has abstract class AC as its subclass. Class C inherits AC. We know that C delegates to an object of D to perform some computations. Besides, C consists of two C1s and one C2 as subcomponents. Object of C2 is still reusable when its major component C is depleted. C1 has a method that takes in an object of E as argument. Which one is invalid
Answer:
are u in HS or college work
I am trying to understand
major characteristics of the bus in computer architecture
Answer:
A bus is characterized by the amount of information that can be transmitted at once. This amount, expressed in bits, corresponds to the number of physical lines over which data is sent simultaneously. A 32-wire ribbon cable can transmit 32 bits in parallel.
In computer architecture, a bus (related to the Latin “omnibus”, meaning “for all”) is a communication system that transfers data between components inside a computer, or between computers. This expression covers all related hardware components (wire, optical fiber, etc.)
Explanation:
Your friend Amy calls you asking for help with her new LCD monitor. She says the monitor isn't showing the whole picture. What is the resolution you should recommend for her to use
Answer: probably 1080p (which is HD)
Explanation: Lcd monitors mainly support 1080p.
what is example of application of machine learning that can be imposed in eduction. (except brainly.)
Answer:
Machine Learning Examples
Recommendation Engines (Netflix)
Sorting, tagging and categorizing photos (Yelp)
Self-Driving Cars (Waymo)
Education (Duolingo)
Customer Lifetime Value (Asos)
Patient Sickness Predictions (KenSci)
Determining Credit Worthiness (Deserve)
Targeted Emails (Optimail)
Study the following two class interfaces: class Question { public: Question(); void set_text(string new_text); void set_answer(string new_answer); void display() const; private: string text; string answer; }; class ChoiceQuestion : public Question { public: ChoiceQuestion(); void set_text(string new_text); }; Which member function from the Question class is overridden in the ChoiceQuestion class?
Answer:
The question function
Explanation:
The ChoiceQuestion function inherits from the Question class and should have it's functions and attributes as it is now a child of the Question class. It however overides the Question class function where it sets the ChoiceQuestion class function in the first function definition of the ChoiceQuestion class definition. This allows the child class to have it's own functions as well have access to the attributes and functions of the parent class.
The process by which the kernel temporarily moves data from memory to a storage device is known as what?
Answer: Swapping
Explanation:
Swapping is referred to as the process by which the kernel temporarily moves data from memory to a storage device.
Swapping is simply a memory management scheme whereby the process can be swapped temporarily from the main memory to the secondary memory in order for the main memory to be available for other processes. Swapping is used for memory utilization.
What is the full form of USB ?
Answer:
universal serial bus: an external serial bus interface standard for connecting peripheral devices to a computer, as in a USB port or USB cable.
Explanation:
when describing a software lincense what does the phrase "open source" mean?
You are developing a site for travel. From the homepage, a visitor wants to view packages for a trip to Japan. Based on the attached file structure and your knowledge of the Internet, write the code for links to the following:
Answer:
Explanation:
After finding the structure online that is mentioned in the question I was able to write out the necessary HTML code. The following code uses <a> tags which are the required tags for links. Inside these tags you will find the href attribute which tells the browser where to take the user when the user clicks on one of these links. Each link has the name of the link, for example, the first link will say "Visit Japan".
<a href="japan.html">Visit Japan</a>
<a href="family.html">Family Friendly Tours</a>
<a href="cycling.html">Cycling Enthusiast Tours</a>
<a href="culinary.html">Culinary Based Excursions</a>
DEFINITION of COMPONENT HARDWARE?
Answer: See explanation
Explanation:
Computer hardware refers to the physical parts of a computer, which includes the monitor, mouse, central processing unit (CPU), keyboard, computer data storage etc.
Hardware are the physical, computer devices, which helps in providing support for major functions like input, processing, output, and communication. The computer hardware is directed by the software to perform an instruction.
As you are working on the Datacenter Edition server, you install a card to connect a set of RAID drives. After the card and drives are set up, you run the installation disc that accompanies the RAID drives and card. When you reboot the server, you get a message about problems with two .dll files. What has most likely happened and how can you fix it
Answer:
by fixing it with card
Explanation:
you have taken out the card I thing
Write a program that divides mystery_value by mystery_value #and prints the result. If that operation results in an #error, divide mystery_value by (mystery_value + 5) and then print the result. If that still fails, multiply mystery_value #by 5 and print the result. You may assume one of those three things will work.
1 mystery_value = 5 2 3 #You may modify the lines of code above, but don't move them! 4 #when you submit your code, we'll change these lines to 5 #assign different values to the variables. 6 I 7 #write a program that divides mystery value by mystery_value 8 #and prints the result. If that operation results in an 9 #error, divide mystery value by (mystery_value + 5) and then 10 #print the result. If that still fails, multiply mystery_value 11 #by. 5 and print the result. You may assume one of those three 12 #things will work, 13 # 14 #You may not use any conditionals. 15 # 16 #hint: You're going to want to test one try/except structure 17 #inside another! Think carefully about whether the second 18 #one should go inside the try block or the except block. 19 20 21 #Add your code here! 22
Answer:
mystery_value = 5
try:
print(mystery_value / mystery_value)
except:
try:
print(mystery_value / (mystery_value + 5))
except:
print(mystery_value * 5)
When planning out the new data center where he is building a private cloud, Juan knows that he needs to account for all of the physical and logical resources that the servers will need in that new network. Which of the following must he account for in regard to the network part of his planning?
a. Ensure that he has enough MAC addresses for the virtual machines.
b. Ensure that he has enough IP addresses for the networks and subnets to account for the vNICs that are in bridging mode.
c. Ensure that there is one network card or port per virtual machine on each host.
d. Ensure that all of the virtual machines are configured with the same VLAN so that they can all communicate with one another.
