Write a balanced equation for the complete combustion of 2,3,3-trimethylpentane. Use the molecular formula for the alkane (C before H) and the smallest possible integer coefficients.

Answer:

Bromine will be a liquid

Answer:

Boiled a added acidic solution for Lowe's home improvement for car insurance cost the Africa map of the soul

Answer:

Add some water to his solution

Explanation:

Ion pair effect refers to strong electrostatic interaction between oppositely charged ions in solution. Such strong interaction affects solute- solvent interaction when an ionic substance is dissolved in water.

High solute concentration may lead to ion-pair effect. Hence, the ion pair effect may be minimized by adding more water (decreasing the concentration of the solution).

To reduce the ion- pair effect, Andy needs to add some water to his solution (dilution).

The activity that would reduce the ion-pairing effect in his AICI₃ solution is : ( B ) add some water to his solution

Ion pair effect is a strong electrostatic interaction seen between ions with opposite charges, when an ionic substance is been dissolved in a solvent such as water this effect will affect the dissolution of the substance.

High concentration of the solute in a solution also leads to the ion pair effect therefore for Andy to reduce the ion-pairing effect in his solution he has to add more water to reduce the concentration of the solute.

Hence we can conclude that The activity that would reduce the ion-pairing effect in his AICI₃ solution is to add some water to his solution

Learn more about ion pair effect : https://brainly.com/question/24100697

Answer:

hey there

Explanation:

CN- (aq) + H+ (aq) → HCN(I)

The reactants are aqueous solutions:

NaCN(aq) and HBr(aq)

When you mix these compounds you make pure HCN (I)

The molecular equation is:

NaCN(aq) + HBr(aq) → NaBr(aq) + HCN(I)

When you dissociate the reactants, you have: Nat(aq) +CN¯(aq) + H*(aq) + Br−(aq) → Nat(aq) + ->

Br (aq) + HCN(I)

Sodium bromide, it is a salt, that can also be

dissociated in the solution

To make, the net ionic equation you remove the repeated ions

CN- (aq) + H+ (aq) → HCN(I)

If you like my answer please mark as brainliest

Answer:

The correct answer is - 5L.

Explanation:

From the ideal gas equation -

pv=nRT

p = pressure

v =volume

Here nRT is constant so

P would be inversely proportioned to v

So, p1/p2 = v2/v1

Putting values:

2/4(2) = v2/20 (p2 = 4 times of P1)

2/8 = v2/20

V2 = 5

Thus, the correct volume at new pressure would be - 5 L.

Answer:

0.70 g/cm³

Explanation:

Step 1: Given data

Step 2: Calculate the density (ρ) of the metal

Density is an intrinsic property of matter. It is equal to the mass of the metal divided by its volume.

ρ = m/V

ρ = 35.0 g/50 cm³ = 0.70 g/cm³

Answer:

It is A, The daughter product has the wrong atomic number

Explanation:

Have trust, please i beg of you.

:) thank me later, love ya

The daughter's product has the wrong atomic number. Hence, option A is correct.

Nuclear equations represent the reactants and products in radioactive decay, nuclear fission, or nuclear fusion.

Beta decay - A common mode of radioactive decay in which a nucleus emits beta particles. The daughter nucleus will have a higher atomic number than the original nucleus.

Hence, the daughter's product has the wrong atomic number.

Learn more about nuclear equation here:

https://brainly.com/question/20660529

#SPJ2

Answer:

C. [tex]H_2S\rightarrow S+2H^++2e^-[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction, it turns out possible to realize there is one sulfur atom on each side of the chemical equation but two hydrogen atoms on the left and one on the right, which means the latter must be balanced in agreement to the law of conservation of mass.

In such a way, by setting a 2 on H⁺, the reaction will be balanced:

[tex]H_2S\rightarrow S+2H^+[/tex]

Now, we count the transfer electrons for sulfur from -2 to 0 as 2e⁻ on the right, which will match with the option C.

[tex]H_2S\rightarrow S+2H^++2e^-[/tex]

Regards!

Answer:

true

Explanation:

Answer:

true

Explanation:

Answer:

yo its jess bregoli

your answer is given below

(◠‿◕)

An atomic mass unit is defined as a mass equal to one twelfth the mass of an atom of carbon-12. The mass of any isotope of any element is expressed in relation to the carbon-12 standard. For example, one atom of helium-4 has a mass of 4.0026 amu. An atom of sulfur-32 has a mass of 31.972 amu.

Answer:

Wide melting point range - impure sample with multiple compounds

Experimental melting point is close to literature value - pure sample of a single compound

Experimental melting point is below literature value - impure sample with multiple compounds

Narrow melting point range - pure sample of a single compound

Explanation:

The melting point of substances are easily obtainable from literature such as the CRC Handbook of Physics and Chemistry.

A single pure substance is always observed to melt within a narrow temperature range. This melting temperature is always very close to the melting point recorded in literature for the pure compound.

However, an impure sample with multiple compounds will melt over a wide temperature range. We also have to recall that impurities lower the melting point of a pure substance. Hence, the experimental melting point of an impure sample with multiple compounds is always below the literature value.

Answer:

NAF IS AN IONIC COMPOUND

Explanation:

Answer:

Explanation:

CO2 is a covalent bonding. It is something from the middle of the periodic table bonded with something on the right of the periodic table. It is not ionic.

NH3 is also covalent. The H bonds with the N and the H has properties that resemble both the metals and non metals. That's why it is on both the left and right sides of the periodic table. In this case, it is more non metallic than metallic. Since Nitrogen is on the right side of the table, you have a situation where 2 nonmetals are bonding. It is not ionic.

The answer is NaF. Sodium is on the left side of the periodic table and F is on the right side. That's what it takes to get an ionic bond.

Answer:

soy....plant protein also is found in vegtables and grain products.

The protein that is derived from the plant is soyabean. Protein-rich foods have a rich source of amino acids. Amino acids are required by the body for different cellular activities.

Proteins are present in plant-based foods and animal-based foods. In nature, the plant-based foods that are rich in proteins are soybeans, beans etc. Animal products such as dairy products, milk, and cheese are rich sources of proteins.

Animal-based foods such as eggs, meat, and fish have a good amount of protein. The proteins are made up of amino acids. Peptide bonds connect each amino acid to the next.

Proteins are necessary for the body, as cells need amino acids for both structural and functional support. Not all cells of the body synthesise all amino acids. Some essential amino acids are required by the body and can be taken from external sources such as plants.

Hence, the plant-based protein is soyabean.

To learn more about the protein, here

https://brainly.com/question/17095120

#SPJ2.

The question is incomplete; the complete question may be the following:

1) Which of the following is a protein source of plant origin?

A)egg

B) Soyabean

C)cheese

D)Milk

Explanation:

strong electrolyte- Nacl HCL NAOH

weak electrolyte- c12H22O, NH3

NaCl,HCl and NaOH  are strong electrolytes while ammonia is a weak electrolyte and sucrose is a non-electrolyte.

It is a solution which consists of ions which are electrically conducting as a result of movement of ions.Class of electrolytes include most soluble salts,acids and bases which are dissolved in a polar solvent.On dissolution, they separate into the constituent ions.

There are 3 classes according to the nature of substance which results upon dissolution:

1) Strong electrolytes- Substances which on dissolution in a medium dissociate completely are strong electrolytes. eg: NaCl,HCl

2) Weak electrolytes-  Substances which on dissolution in a medium dissociate partially are weak electrolytes. eg: NH₃

3)Non-electrolytes- Substances which do not dissociate on dissolution are non-electrolytes. eg: sucrose

Learn more about electrolytes,here:

https://brainly.com/question/8889716

#SPJ2

Answer:

2–methylbutane

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the longest continuous carbon chain. This gives the parent name of the compound.

2. Determine the substituent group attached.

3. Determine the position of the substituent group by giving it the lowest possible count..

4. Combine the above to obtain the name of the compound.

With the above information, we can name the compound as follow:

1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.

2. The substituent group attached to the compound is methyl (–CH₃).

3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).

4. The name of the compound is:

2–methylbutane

Answer:

5.37 × 10⁻⁴ mol/L

Explanation:

A chemist makes 660. mL of magnesium fluoride working solution by adding distilled water to 230. mL of a 0.00154 mol/L stock solution of magnesium fluoride in water. Calculate the concentration of the chemist's working solution. Round your answer to 3 significant digits.

Step 1: Given data

Step 2: Calculate the concentration of the final solution

We want to prepare a dilute solution from a concentrated one. We can calculate the concentration of the final solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁ / V₂

C₂ = 0.00154 mol/L × 230. mL / 660. mL = 5.37 × 10⁻⁴ mol/L

Explanation:

can u post a picture of the question ?

Answer:

a. The longest chain is chosen incorrectly.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structural formula of the 1,3-Dimethylbutane:

[tex]CH_3-CH_2-CH(CH3)-CH_2-CH_3[/tex]

Thus, we can see that the correct name should be 3-methylpentane since the longest chain was chosen incorrectly, as it must have five carbon atoms.

Regards!

Explanation:

Sublimation is the conversion between the solid and the gaseous phases of matter, with no intermediate liquid stage

I think it's 9 ................'

Answer:

On the periodic table,periods are horizontal rows (across) the periodic table while groups are vertical columns (down) the table.We have groups in the periodic table like transition metals,rare earth,alkali metals ,alkaline earth metals halogens and noble gases

Answer:

Horizontal row call period and vertical column called group!

Physical,chemical, reaction procedure, shape,size, enthalpy of dissociation, bonding,non bonding, various things that segregated group and period....

Solution :

  Term                                                                      Best description

Eriochrome Black T                                                          EBT

Starting color, before titration                               Pale purple-pink color

Molecule that has a high affinity for metal ions       Chelating agent

Ethylenediaminetetracetic acid                                    EDTA

Color at the completion of titration                           Blue-gray color    

Answer:

it binds molecules like a chemical bond-breaking

Explanation:

Enzymes perform the critical task of lowering a reaction's activation energy—that is, the amount of energy that must be put in for the reaction to begin. Enzymes work by binding to reactant molecules and holding them in such a way that the chemical bond-breaking and bond-forming processes take place more readily.

Answer:

The answer is B.

Explanation:

Answer: The volume of NaOH required at the half-equivalence point is 6.21 mL

Explanation:

The chemical equation for the reaction of a weak acid with NaOH follows:

[tex]HA+ NaOH\rightarrow NaA+H_2O[/tex]

From the equation, we can say that NaOH and weak acid is present in a 1 : 1 ratio.

We are given:

Volume of NaOH required at equivalence point = 12.42 mL

The volume of NaOH required at half-equivalence point will be = [tex]\frac{12.42mL}{2}=6.21mL[/tex]

Hence, the volume of NaOH required at the half-equivalence point is 6.21 mL

The volume of NaOH at the half-equivalence point is 6.21 mL

The equivalence point is the point at which equal amount of the acid and base have reacted.

Half equivalence point = Equivalence point / 2

Half equivalence point = 12.42 / 2

Half equivalence point = 6.21 mL

Therefore, we can conclude that the volume of NaOH at the half-equivalence point is 6.21 mL.

Learn more about titration:

https://brainly.com/question/14356286

Answer:

The problem of energy exchange between waves and particles, which leads to energization of the latter, in an unstable plasma typical of the radiation belts. The ongoing Van Allen Probes space mission brought this problem among the most discussed in space physics. A free energy which is present in an unstable plasma provides the indispensable condition for energy transfer from lower energy particles to higher-energy particles via resonant wave-particle interaction. This process is studied in detail by the example of electron interactions with whistler mode wave packets originated from lightning-induced emission. We emphasize that in an unstable plasma, the energy source for electron energization is the energy of other particles, rather than the wave energy as is often assumed. The way by which the energy is transferred from lower energy to higher-energy particles includes two processes that operate concurrently, in the same space-time domain, or sequentially, in different space-time domains, in which a given wave packet is located. In the first process, one group of resonant particles gives the energy to the wave. The second process consists in wave absorption by another group of resonant particles, whose energy therefore increases. We argue that this mechanism represents an efficient means of electron energization in the radiation belts.

Explanation:

Fun facts:

In the process of energy transfer between two groups of particles both processes operate simultaneously, and if the lower energy part of plasma distribution gives energy to the wave while the higher‐energy part absorbs the wave enrgy, then the wave‐mediated energy transfer from lower energy particles to higher‐energy ...

Answer:

Sensors and evacuation planning.

Explanation:

Sensors that provides information about hurricane and evacuation planning are the two steps that can reduce the vulnerability of the United States to hurricanes. Sensors provides information about hurricane so we can prepare ourselves about it and the evacuation plan helps in order to quick displacement of people from the hurricane area so these two steps can reduce the vulnerability of the US to hurricanes.

Answer:

moles CO₂ produced from combustion of 7.9 mole of C₅H₁₂ = 39.5 moles CO₂

Explanation:

              C₅H₁₂      +   8O₂      =>      6H₂O      +      5CO₂

Given:   7.9moles    excess            _____            ? moles

From Equation, 1 mole C₅H₁₂ =============>  5 moles CO₂

Given            7.9 mole C₅H₁₂  =============>         X

Solving for 'X' using ratio and proportion ...

1mole C₅H₁₂ / 7.9mole C₅H₁₂ =  5mole CO₂ / X

=> X = 5 mole CO₂ x  7.9mole C₅H₁₂ / 1mole C₅H₁₂  =  39.5 moles CO₂

≅ 40 moles CO₂ (2 sig. figs.)

Answer:

Boiling T° of solution = 100.6

Explanation:

Formula for elevation of boiling point is:

ΔT = Kb . m . i

where ΔT means Boiling T° of solution - Boiling T° of pure solvent

Our solute is a non ionizing compound.

i = 1, because it is a non ionizing compound. i, indicates the ions dissolved in solution.

m = molality (moles of solute dissolved in 1 kg of solvent)

90 g of solvent = 0.09 kg of solvent

We convert mass of solute to moles (by the molar mass):

10 g . 1 mol /92.09 g = 0.108 moles

m = 0.108 mol /0.09 kg = 1.21 m

Let's replace data: Boiling T° of solution - 100°C = 0.51 °C/m . 1.21 m . 1

Boiling T° of solution = 0.51 °C/m . 1.21 m . 1 + 100°C

Boiling T° of solution = 100.6