Write a balanced chemical equation for the base hydrolysis of methyl butanoate with NaOH. (Use either molecular formulas or condensed structural formulas, but be consistent in your equation.)

Answers

Answer 1

Explanation:

C5H10O2 + NaOH = C2H5COONa + C2H5OH

your result are : sodium propanoate and ethanol

Answer 2

A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.

What is hydrolysis?

Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.

The base hydrolysis of methyl butanoate is shown as,

C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH

Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).

Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.

Learn more about hydrolysis here:

https://brainly.com/question/22078321

#SPJ2


Related Questions

In the Lewis structure of AB4 where B is more electronegative than A. Both are main group elements where A has 8 valence electrons and each B has 7 valence electrons.

Required:
a. What is the total number of valence electrons?
b. How many lone pairs are in the molecule?

Answers

Answer:

1. 36

2. Two

Explanation:

The Lewis structure shows the valence electrons present in a compound. Usually the valence electrons are shown as dot structures around the symbol of the elements involved in the compound.

For a compound AB4 where B is more electronegative than A and A has 8 electrons in its valence shell, there will be thirty six valence electrons on the outermost shell of the molecule.

There are six electron pair domains present in the molecule, four bond pairs and two lone pairs. The molecule is in a square planar geometry.

Answer: a- 36 valence electrons

b- 14 lone pairs

Explanation:

Valence is equal to A + 4B = 8 + 4(7)

With 4 bonds between A and the 4 B, that is 36 valence minus 8 electrons in those pairs = 28. 28 is 14 lone pairs.

Find the pH of these buffer solutions using the information provided: 1L solution containing 80g of lactic acid (MW

Answers

Answer:

pH of the solution is 2.0

Explanation:

The lactic acid is a weak acid that is in equilibrium with water as follows:

Lactic acid + H2O ⇄ Lactate + H₃O⁺

And Ka for lactic acid: 1.38x10⁻⁴

Ka = 1.38x10⁻⁴ = [Lactate] [H₃O⁺] / [Lactic acid]

Initial concentration of lactic acid is (MW: 112.06g/mol):

80g * (1mol / 112.06g) / 1L = 0.714M

The equilibrium concentration of the species in the equilibrium are:

[Lactate] = X

[H₃O⁺] = X

[Lactic acid] = 0.714-X

Replacing in Ka expression:

1.38x10⁻⁴ = [X] [X] / [0.714-X]

9.8532x10⁻⁵ -  1.38x10⁻⁴X = X²

9.8532x10⁻⁵ -  1.38x10⁻⁴X - X² = 0

Solving for X:

X = -1.0x10⁻². False solution, there is no negative concentrations

X = 9.86x10⁻³M. Right solution.

As [H₃O⁺] = X

[H₃O⁺] = 9.86x10⁻³M

and pH = -log [H₃O⁺] = -log 9.86x10⁻³M

pH = 2.0

pH of the solution is 2.0

Rank the following amine derivatives from highest acidity (lowest pKa value) to lowest acidity (highest pKa value).
Highest acidity
anilinium ion
aniline
ammonium ion
secondary amine
amide
Lowest acidity

Answers

Answer:

anilinium ion > ammonium ion > amide > aniline > secondary amine

Explanation:

Acidity of amine derivatives can derived from their pKa values.

The rule of thumb for acidity with relation to pKa values is that:

As the pKa decreases the acid strength increases and the conjugate base decreases. Similarly, as the pKa increases, the acid strength decreases and the conjugate base increase.

Hence the stronger the acid , the  lower pKa value  and the weaker the acid , the stronger the pKa value.

So the pKa value for anilinium ion = 4.6

ammonium ion = 9.4

Amide = 15

Similarly, for aniline and secondary amine, in order to determine the derivative with the higher acidity, we will consider the electron withdrawing substituent group.

The more difficult the electron are being withdraw from the electron withdrawing substituent , the more acidic the compound.

In aniline , the stabilized benzene ring attached to NH₂ makes it a less electron withdrawing group compared to the straight chains structure found in secondary amine where electron are easily withdraw by nucleophilic substitution reactions.

Thus, from highest acidity (lowest pKa value) to lowest acidity (highest pKa value).

the amine derivatives ranking is as follows:

anilinium ion > ammonium ion > amide > aniline > secondary amine

What are some geographic features that could be found in the hydrosphere?

Answers

Lakes, oceans, glaciers, clouds, etc. It categorizes all forms of water on earth.

hydro = water

Answer:

Lakes, streams, ground water, polar ice caps, glaciers, water vapor, and rivers!

Explanation:

The hydrosphere is made up of all the water on Earth. So anything that is water, like oceans, can be found in the hydrosphere:)

Calculate the amount of heat that must be absorbed by 10.0 g of ice at –20°C to convert it to liquid water at 60.0°C. Given: specific heat (ice) = 2.1 J/g·°C; specific heat (water) = 4.18 J/g·°C; ΔH fus = 6.0 kJ/mol.

Answers

Answer:

The amount of heat to absorb is 6,261 J

Explanation:

Calorimetry is in charge of measuring the amount of heat generated or lost in certain physical or chemical processes.

The total energy required is the sum of the energy to heat the ice from -20 ° C to ice of 0 ° C, melting the ice of 0 ° C in 0 ° C water and finally heating the water to 60 ° C.

So:

Heat required to raise the temperature of ice from -20 °C to 0 °C

Being the sensible heat of a body the amount of heat received or transferred by a body when it undergoes a temperature variation (Δt) without there being a change of physical state (solid, liquid or gaseous), the expression is used:

Q = c * m * ΔT

Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation (ΔT=Tfinal - Tinitial).

In this case, m= 10 g, specific heat of the ice= 2.1 [tex]\frac{J}{g*C}[/tex] and ΔT=0 C - (-20 C)= 20 C

Replacing: Q= 10 g*2.1 [tex]\frac{J}{g*C}[/tex] *20 C and solving: Q=420 J

Heat required to convert 0 °C ice to 0 °C water

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

In this case, being 1 mol of water= 18 grams: Q= 10 g*[tex]6.0 \frac{kJ}{mol} *\frac{1 mol of water}{18 g}[/tex]= 3.333 kJ= 3,333 J (being kJ=1,000 J)

Heat required to raise the temperature of water from 0 °C to 60 °C

In this case the expression used in the first step is used, but being: m= 10 g, specific heat of the water= 4.18 [tex]\frac{J}{g*C}[/tex] and ΔT=60 C - (0 C)= 60 C

Replacing: Q= 10 g*4.18 [tex]\frac{J}{g*C}[/tex] *60 C and solving: Q=2,508 J

Finally, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

The amount of heat to absorb is 6,261 J.

Calculation for heat:

Heat required to raise the temperature of ice from -20 °C to 0 °C.

The formula for specific heat is used to calculate the amount of heat

Q = c * m * ΔT

Where,

Q =heat exchanged by a body,

m= mass of the body

c= specific heat

ΔT= change in temperature

Given:

m= 10 g,

specific heat of the ice= 2.1

ΔT=0 C - (-20 C)= 20 C

On substituting the values:

Q= 10 g*2.1  *20 C

Q=420 J

Heat required to convert 0 °C ice to 0 °C water.

The heat Q necessary to melt a substance depends on its mass m and on the called latent heat of fusion of each substance:

Q= m* ΔHfusion

Heat required to raise the temperature of water from 0 °C to 60 °C

m= 10 g,

Specific heat of the water= 4.18  

ΔT=60 C - (0 C)= 60 C

On substituting:

Q= 10 g*4.18  *60 C

Q=2,508 J

Thus, Qtotal= 420 J + 3,333 J + 2,508 J

Qtotal= 6,261 J

The amount of heat to absorb is 6,261 J

Find more information about Specific heat here:

brainly.com/question/13439286

Why can long chain fatty acids can form micelles in solutions with pH > 7 but are insoluble in pH < 5

Answers

Answer:

In basic conditions that is ( pH > 7 ), the equilibrium shifts towards right and produces a lot of (-ve) negatively charged fatty acids which are polar, In water, since they have long hydrophobic hydrocarbon part, this form micelles where the hydrocarbon part  remain inside the  sphere and -coo- group remain outside the sphere due to H-bonding interaction with water.

At ( pH < 5 ) I.e acidic conditions, the equilibrium shift to the left giving neutral molecules which can not have stronger H-bonding interaction .

So micelles cant form as they become insoluble.

g The electronic structure of which ONE of the following species cannot be adequately described by a single Lewis formula? (In other words, the electronic structure of which one can only be described by drawing two or more resonance structures?) A) C2H4 B) SO3 2– C) SO3 D) C3H8 E) HCN

Answers

Answer:

C) SO3

Explanation:

Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.

SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.

Hence, the correct answer is C) SO3

Which two layers are part of the thermosphere?

O exosphere and ionosphere

O ionosphere and mesosphere

mesosphere and stratosphere

O stratosphere and troposphere

Answers

The two layers are part of the thermosphere are  exosphere and ionosphere.

What is the exosphere layer?

The Exosphere is the topmost layer of the Earth's atmosphere.

and its gradually disappear into the vacuum of space.

It consist two parts that are:

exosphere and ionosphere.

Thus, option "A" is correct, the rest of the option is not a part of thermosphere.

To learn more about  atmospheric layers click here:

https://brainly.com/question/25881294

#SPJ2

Answer:

hi hope your doing great the answer is A

Explanation:

its on Edge 2020

hope i helped :)

Consider the compound hydrazine N2H4 (MW = 32.0 amu). It can react with I2 (MW = 253.8 amu) by the following reaction 2 I2 + N2H4 ------------- 4 HI + N2 (a) How many grams of I2 are needed to react with 36.7 g of N2H4? (b) How many grams of HI (MW = 127.9 amu) are produced from the reaction of 115.7 g of N2H4 with excess iodine?

Answers

Answer:Cobb

Explanation:What y'all

A solution of LiCl in water has XLiCl = 0.0800. What is the molality? A solution of LiCl in water has XLiCl = 0.0800. What is the molality? 4.44 m LiCl 8.70 m LiCl 4.83 m LiCl 4.01 m LiCl

Answers

Answer:

mol LiCl = 4.83 m

Explanation:

GIven:

Solution of LiCl in water XLiCl = 0.0800

Mol of water in kg = 55.55 mole

Find:

Molality

Computation:

mole fraction = mol LiCl / (mol water + mol LiCl)

0.0800 = mol LiCl / (55.55 mol + mol LiCl)

0.0800 mol LiCl + 4.444 mol = mol LiCl

mol LiCl - 0.0800 mol LiCl = 4.444 mol

0.92 mol LiCl = 4.444 mol

mol LiCl = 4.83 m

At what temperature in K will 0.750 moles of oxygen gas occupy 10.0 L and exert 2.50 atm of pressure

Answers

Answer:

406 K.

Explanation:

The following data were obtained from the question:

Number of mole (n) = 0.750 mole

Volume (V) = 10.0 L

Pressure (P) = 2.50 atm

Temperature (T) =.?

Note: Gas constant (R) = 0.0821 atm.L/Kmol

The temperature, T can be obtained by using the ideal gas equation as follow:

PV = nRT

2.5 x 10 = 0.75 x 0.0821 x T

Divide both side by 0.75 x 0.0821

T = (2.5 x 10) /(0.75 x 0.0821 )

T = 406 K.

Therefore, the temperature is 406 K.

Answer: 406 K

Explanation:

We can rewrite the ideal gas law to solve for T:

PV = nRT

T=PV / nR

We are given the following from the problem:

n=0.750 mol P=2.50 atm V=10.0 L

Plugging in our values and using R=0.08206 L⋅atm / K⋅mol we get:

T=(2.50 atm)(10.0 L) / (0.750 mole)(0.08206L ⋅ atm ⋅ mole K) = 406 K

What is advertising used for? Check all that apply. influencing consumer tastes tracking product popularity increasing product awareness promoting company branding gathering data about potential consumers

Answers

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Creative advertisements, influence customers or consumers to buy the product.Advertisings involve information regarding the product and so increases product awareness.Advertising on social media platforms, TVs, radio and newspapers, promotes company branding.

Hence, the correct options are:

influencing consumer tastesincreasing product awarenesspromoting company branding

Answer:

1,3,4

Explanation:

I took the test

Given the data: Ag2O(s), = ‑31.1 kJ mol-1, S° = +121.3 J mol-1 K-1 Ag(s), = 0.00 kJ mol-1, S° = +42.55 J mol-1 K-1 O2(g), = 0.00 kJ mol-1, S° = +205.0 J mol-1 K-1 Calculate the temperature at which = 0 for the reaction, Ag2O(s) → 2 Ag(s) + ½ O2(g). Assume that, since the physical states do not change, and are independent of tempera­ture between ‑50.0 °C and 950.0 °C.

Answers

Answer:

[tex]T=469.1K\\\\T=195.9\°C[/tex]

Explanation:

Hello,

In this case, for the given decomposition reaction, we can compute the enthalpy of reaction considering the enthalpy of formation of each involved species (products minus reactants):

[tex]\Delta _rH=2\Delta _fH_{Ag}+\frac{1}{2} \Delta _fH_{O_2}-\Delta _fH_{Ag_2O}\\\\\Delta _rH=2*0.00+\frac{1}{2} *0.00-(-31.1)=31.1kJ/mol[/tex]

Next, the entropy of reaction considering the standard entropy for each involved species (products minus reactants):

[tex]\Delta _rS=2S_{Ag}+\frac{1}{2} S_{O_2}-S_{Ag_2O}\\\\\Delta _rS=2(42.55)+\frac{1}{2} (205.0)-(121.3)=66.3J/(mol*K)[/tex]

Next, since the Gibbs free energy of reaction is computed in terms of both the enthalpy and entropy of reaction at the unknown temperature, for such Gibbs energy equaling 0, the temperature (in K and °C) turns out:

[tex]\Delta _rG=\Delta _rH-T\Delta _rS\\\\0=31.1kJ/mol-T(66.3\frac{J}{mol*K}*\frac{1kJ}{1000J} )\\\\T=\frac{31.1kJ/mol}{0.0663kJ/(mol*K)} =469.1K\\\\T=195.9\°C[/tex]

Which is within the given rank.

Best regards.

When the nuclide carbon-14 undergoes beta decay: The name of the product nuclide is . The symbol for the product nuclide is

Answers

Answer:

Explanation:

The equation for the decay is given as;

¹⁴₆C  --> X + ⁰₋₁e

For conservation of matter, the mass number and atomic number has to be the same in both the reactant and product side f he equation;

Mass number;

14 = x + 0

x = 14

Atomic Number;

6 = x + (-1)

x = 6 + 1 =7

¹⁴₆C  --> ¹⁴₇N + ⁰₋₁e

The name of the product nuclide with atomic number of 7 is Nitrogen. The symbol is; ¹⁴₇N

If a sample of C-14 initially contains 1.6 mmol of C-14, how many millimoles will be left after 2250 years

Answers

Answer: 1.2 millimoles will be left after 2250 years

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant

t = age of sample

a = let initial amount of the reactant

a - x = amount left after decay process  

a) for completion of half life:

Half life is the amount of time taken by a radioactive material to decay to half of its original value.

[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{5730}=0.00012years^{-1}[/tex]

b) Amount left after 2250 years

[tex]2250=\frac{2.303}{k}\log\frac{1.6}{a-x}[/tex]

[tex]2250=\frac{2.303}{0.00012}\log\frac{1.6}{a-x}[/tex]

[tex]\log\frac{1.6}{a-x}=0.117[/tex]

[tex]\frac{1.6}{a-x}=1.31[/tex]

[tex]{a-x}=\frac{1.6}{1.31}=1.2[/tex]

Thus 1.2 millimoles will be left after 2250 years

If you had a cup full of methanol and a pool full of methanol, would the mass change?

Answers

Answer:

the mass does not change

Explanation:

What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm?​ (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s

Answers

Answer:

[tex]E=2.06\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The wavelength of electromagnetic radiation is 963.5 nm.

We need to find the energy of a photon with this wavelength.

The formula used to find the energy of a photon is given by :

[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]

So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].

"What is the difference between the revertible and nonrevertible rII mutants that Benzer generated?"

Answers

The difference is that revertible is u are able to change back and get back what u once had non revertible is the opposite meaning,u can’t have what u once had.

What creation would you make if you had access to any of the chemical elements? can someone answer this for me please.​

Answers

Answer:

Depends on the chemicals.

Explanation:

The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is  a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.

Calculate the energy required to heat 1.30kg of water from 22.4°C to 34.2°C . Assume the specific heat capacity of water under these conditions is 4.18·J·g−1K−1 . Round your answer to 3 significant digits.

Answers

Answer:

The energy required to heat 1.30 kg of water from 22.4°C to 34.2°C is 64,121.2 J

Explanation:

Calorimetry is the measurement of the amount of heat that a body gives up or absorbs in the course of a physical or chemical process.

The sensible heat of a body is the amount of heat received or transferred by a body when undergoing a temperature variation (Δt) without there being a change in physical state. That is, when a system absorbs (or gives up) a certain amount of heat, it may happen that it experiences a change in its temperature, involving sensible heat. Then, the equation for calculating heat exchanges is:

Q = c * m * ΔT

Where Q is the heat or quantity of energy exchanged by a body of mass m, constituted by a substance of specific heat c and where ΔT is the variation in temperature (ΔT=Tfinal - Tinitial).

In this case:

[tex]c=4.18 \frac{J}{g*K}[/tex]m= 1.30 kg= 1,300 g (1 kg=1,000 g)ΔT= 34.2 °C - 22.4 °C= 11.8 °C= 11.8 °K  Being a temperature difference, it is independent if they are degrees Celsius or degrees Kelvin. That is, the temperature difference is the same in degrees Celsius or degrees Kelvin.

Replacing:

[tex]Q=4.18 \frac{J}{g*K}*1,300 g*11.8 K[/tex]

Q= 64,121.2 J

The energy required to heat 1.30 kg of water from 22.4°C to 34.2°C is 64,121.2 J

GIVING 100 POINTS PLEASE ANSWER SOON When ponds freeze, they freeze at the surface first before freezing at the bottom. Which property of water explains why this might happen? Density Adhesion High boiling point High specific heat

Answers

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

A student mixes 1.0 mL of aqueous silver nitrate, AgNO3 (aq), with 1.0 mL of aqueous sodium chloride, NaCl (aq), in a clean test tube. What will the student observe

Answers

Answer:

AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Explanation:

If a student mixes 1.0 mL of aqueous silver nitrate AgNO3 (aq)  with 1.0 mL of aqueous sodium chloride, NaCl (aq), in a clean test tube.

The sodium chloride is being acidified with dilute trioxonitrate (V) acid. Then a few drops of  silver trioxonitrate(V) is added afterwards. A  white precipitate of silver chloride, which dissolves readily in aqueous ammonia indicates the presence of sodium chloride.

The reaction proceeds as follows:

[tex]\mathtt{AgNO_{3(aq)} + NaCl _{(aq)} \to AgCl _{(s)} + NaNO_3_{(aq)}}[/tex]

From the reaction between AgNO3 (aq) and NaCl (aq), AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

PLEASE HELP WILL GIVE BRAINLIEST!!!
Refining aluminum takes place in steel vats lined with graphite. What function does the graphite lining serve?
A. It is the cathode.
B. It is the anode.
C. It soaks up the waste oxygen released from bauxite (Al2O3)
D. It serves as a grounding layer to prevent electrical surges.

Answers

Answer: It's the anode broski (B)

Explanation: I'm taking the Chem summer course too broski, this was the correct answer. Cheers broski

The respiration rate of a goldfish is measured. The goldfish is then placed in cold water and the respiration rate is measured again. What is the INDEPENDENT variable?

Answers

Answer:

Temperature of the water

Explanation:

In every study, there must be independent and dependent variables. An independent variable is the variable that is changed in order to obtain a response. In this case, the temperature of the water is being changed, the response in this experiment is the respiration rate of the goldfish.

Thus the respiration rate of the goldfish is the dependent variable because it is controlled by the temperature of the water and changes accordingly.

Summarily, the independent variable is the temperature of the water while the dependent variable is the respiration rate of the goldfish.

Check 0/1 ptRetries 5 Element R has three isotopes. The isotopes are present in 0.0825, 0.2671, and 0.6504 relative abundance. If their masses are 97.62, 109.3, and 138.3 respectively, calculate the atomic mass of element R.

Answers

Answer:

Atomic mass = 127.198 amu

Explanation:

The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.

Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)

Atomic mass = 8.05365 +  29.19403 + 89.95032

Atomic mass = 127.198 amu

Draw two constitutional isomers that share the molecular formula C3H8S. Your structures will have the same molecular formula but will have different connectivities.

Answers

Answer:

Two constitutional isomers for the compound C3H8S are shown in the attachment below

Explanation:

Constitutional isomers are isomers that have the same molecular formula but different connectivity. Two constitutional isomers for the compound C3H8S are shown in the attachment below.

As per the concept of structural isomers, the  two constitutional isomers that share the molecular formula C₃H₈S are attached in attachment below.

Structural isomers are defined as the isomers  in which atoms are completely  arranged  in a different order but the molecular formula remains the same.

They are the molecules which have same molecular formula but different  connectivities  of atoms  which depend on the order they are put together. An increase in the number of carbon atoms leads to an increase  in the structural isomers.

Learn more about structural isomers,here:

https://brainly.com/question/33929317

#SPJ6

A chemist prepares a solution of silver(I) nitrate(AgNO3) by measuring out 269. mu mol of silver(I) nitrate into a 300. mL volumetric flask and filling the flask to the mark with water. Calculate the concentration in mmol/L of the chemist's silver(I) nitrate solution.

Answers

Answer:

concentration   in    mmol/L = 8.97 × 10⁻¹ mmol/L

Explanation:

Given that:

the number of moles of  silver(I) nitrate(AgNO3) the chemist used in preparing a solution = 269 mmol = 269 × 10⁻³ mmol

The volume of the volumetric flask = 300 mL  = 300 × 10⁻³ L

In order to calculate the concentration in mmol/L of the chemist's silver(I) nitrate (AgNO3) solution , we used the formula which can be expressed as;

[tex]concentration \ in \ mmol/L = \dfrac{ number \ of \ mmol}{vol. \ of \ the \ solution}[/tex]

[tex]concentration \ in \ mmol/L = \dfrac{ 269 * 10^{-3 } \ mmol }{300 * 10^{-3} \ L }[/tex]

concentration   in    mmol/L = 0.8966   mmol/L

concentration   in    mmol/L = 8.97 × 10⁻¹ mmol/L

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: it will react with hydroxide

Answers

Answer:

It will react with water

Explanation:

I know this is an older question, but I just wanted to provide the correct answer.

Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.

The conjugate base of a weak acid affect pH because it will react with hydronium ion.

A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.

Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;

CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)

We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.

Learn more: https://brainly.com/question/8592296

Missing parts;

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above

1. For the following reaction, 4.86 g of magnesium nitride are mixed with excess water. The reaction yields 7.18 g of magnesium hydroxide.
magnesium nitride(s) + water(1) –> magnesium hydroxide (aq) + ammonia (aq)
What is the ideal yield of magnesium hydroxide?
What is the percent yield for this reaction?
2. For the following reaction, 6.41 g of hydrogen gas are mixed with excess nitrogen gas. The reaction yields 26.2 g of ammonia.
nitrogen(g) + hydrogen(g) –> ammonia(g)
What is the ideal yield of ammonia?
What is the percent yield for this reaction?
3. For the following reaction, 3.79 g of water are mixed with excess chlorine gas. The reaction yields 8.70 g of hydrochloric acid.
chlorine(g) + water(1) –> hydrochloric acid(aq) + chloric acid (HCIO3)(aq)
What is the ideal yield of hydrochloric acid?
What is the percent yield for this reaction?

Answers

Answer:

See explanation

Explanation:

1)

Mg3N2(s) + 6H2O(l) ------------> 3Mg(OH)2 + 2NH3(g)

Number of moles of magnesium nitride= mass/molar mass= 4.86g/100.9494 g/mol = 0.048 moles

1 mole of magnesium nitride yields 3 moles of magnesium hydroxide

0.048 moles of magnesium nitride yields 0.048 moles × 3= 0.144 moles of magnesium hydroxide

Theoretical yield of magnesium hydroxide = 0.144 moles × 58.3197 g/mol = 8.398 g

Percent yield= actual yield/ theoretical yield × 100

Percent yield= 7.18/8.398 × 100/1 = 85.5%

2)

N2(g) + 3H2(g) -------> 2NH3(g)

Number of moles of hydrogen gas = mass/ molar mass = 6.41g/ 2gmol-1 = 3.205 moles of hydrogen gas.

From the balanced reaction equation;

3 moles of hydrogen gas yields 2 moles of ammonia

3.205 moles of hydrogen gas yields 3.205 × 2/3 = 2.1367 moles of ammonia

Theoretical yield of ammonia = 2.1367 moles × 17 gmol-1 = 36.3 g

Percent yield = actual yield/ theoretical yield ×100

Percent yield = 26.2/36.3 ×100

Percent yield = 72.2%

3)

3Cl2(g) + 3H2O(l) ------> HOCl3(aq) + 5HCl(aq)

Number of moles of water= mass/ molar mass = 3.79g/18 gmol-1 = 0.21 moles

Since

3 mole of water yields 5 mole of HCl

0.21 moles of water yields 0.21 × 5/3 = 0.35 moles of HCl

Theoretical yield of HCl = 0.35 moles × 36.5 gmol-1 = 12.775 g

Percent yield = actual yield/ theoretical yield × 100/1

Percent yield = 8.70/12.775 ×100

Percent yield = 68.1%

Which of the following solutions is acidic? [H3O+] = 1.0 x 10-10 M [H3O+] < 1.0 x 10-7 M [OH-] = 1.0 x 10-10 M [OH-] = 1.0 x 10-7 M [OH-] > 1.0 x 10-7 M

Answers

Answer:

[OH-] = 1.0 x 10-10 M

Explanation:

The acidity of a solution can be determined directly from the concentration of the hydrogen ions and indirectly from the concentrations of the hydroxide ions.

Generally, for a neutral solution we have;

[H3O+] = [OH-] = 1.0 x 10-7 M

For an acidic solution;

[H3O+] > 1.0 x 10-7 M

[OH-] < 1.0 x 10-7 M

Comparing the options the correct option is;

[OH-] = 1.0 x 10-10 M

Other Questions
If an applicant is not hired because the applicant has previously claimed overtime which they were owed, they are likely to be covered under the Complete the function by filling in the missing parts. The color_translator function receives the name of a color, then prints its hexadecimal value. Currently, it only supports the three additive primary colors (red, green, blue), so it returns "unknown" for all other colors. m 1 - def color_translator(color): 2. if _== "red": 3 hex_color = "#ff0000" 4- elif == "green": 5 hex_color = "#00ff00" elif == "blue": hex_color = "#0000ff" in 0 hex_color = "unknown" return _ . 12 13 14 15 16 17 print(color_translator("blue")) # Should be #0000ff print(color_translator ("yellow")) # should be unknown print(color_translator("red")) # Should be #ff0000 print(color_translator ("black")) # should be unknown print(color_translator("green")) # Should be #00ff00 print(color translator("")) # should be unknown Run Reset Simplify to create an equivalent expression. 3(2+4k)+7(2k1) evaluwate 5(14-2to the third power)+8/2 Derek bought cloth for $800. He spent $200 for stitching a shirt. He sold the shirt for $1175. Find the profit. Quantitative Problem 1: Assume today is December 31, 2017. Barrington Industries expects that its 2018 after-tax operating income [EBIT(1 T)] will be $450 million and its 2018 depreciation expense will be $65 million. Barrington's 2018 gross capital expenditures are expected to be $110 million and the change in its net operating working capital for 2017 will be $30 million. The firm's free cash flow is expected to grow at a constant rate of 4.5% annually. Assume that its free cash flow occurs at the end of each year. The firm's weighted average cost of capital is 9%; the market value of the company's debt is $3 billion; and the company has 180 million shares of common stock outstanding. The firm has no preferred stock on its balance sheet and has no plans to use it for future capital budgeting projects. Using the free cash flow valuation model, what should be the company's stock price today (December 31, 2017)? Do not round intermediate calculations. Round your answer to the nearest cent. $ per share At the beginning of the Iraq war only 38% of Americans said the war was justified even if Iraq did not have weapons of mass destruction. When no such weapons were found after the war, 58% of Americans then supported the war. This revision of people's memories of the government's rationale for going to war is as an example of Find the constant $p$ such that $x^2 - 5x + p$ is the square of a binomial. what number would you subtract from each side of inquality to solve y+3/8>16 Which of these factors will cause a solid solute to dissolve faster? Which of the following Enlightenment principlesreflected in this passage fueled revolutions in theWestern Hemisphere?A. The social contractB Virtual representationC Constitutional monarchyD Democratic republicanism How is 200,000 + 7,000 +500 + 3 written in standard form? A poem that develops a theme from ancient Greek literature and explores order and balance in nature is influenced by which literary movement? Classicism Modernism Romanticism Postmodernism Round 3.1 to the nearest whole number Simplify -3(2w - 6) +4(w + 1) 3 inches is what fraction of a foot? A rock is thrown at a window that is located 16.0 m above the ground. The rock is thrown from the ground at an angle of 40.0 above horizontal with an initial speed of 30.0 m/s and experiences no appreciable air resistance. If the rock strikes the window on its upward trajectory, from what horizontal distance from the window was it released? It's nighttime, and you've dropped your goggles into a 3.2-m-deep swimming pool. If you hold a laser pointer 1.2 m above the edge of the pool, you can illuminate the goggles if the laser beam enters the water 2.0 m from the edge.How far are the goggles from the edge of the pool? You want to make a one-time deposit today that will increase in value to $100 at the end of this year. Which rate of interest will allow you to deposit the least amount today to reach this goal Paul travels from Rye to Eston at an average speed of 90 km/h He travels for T hours.Mary makes the same journey at an average speed of 70 km/h She travels for 1 hour longer than Paul. Work out the value of T .