Wood is an example of
A. Metalloid
B. Insulator
C. Nonmetal
D. Conductor

Answers

Answer 1
The Answer is b: insulator

Related Questions

a concrete has a height of 5m and has unit area 3m² supports a mass of 30000kg.
Determine the stress, strain and change in height ​

Answers

Answer:

stress = 98000 N/m^2

strain = 3.92 x 10^-6

change in height = 0.0196 mm

Explanation:

Height, h = 5 m

Area, A = 3 m²

mass, m = 30000 kg

Stress is defined as the force per  unit area.

[tex]stress = \frac{mg}{A}\\\\stress = \frac{30000\times 9.8}{3}\\\\stress = 98000 N/m^2[/tex]

Young's modulus of concrete is Y = 2.5 x 10^10 N/m^2

Young's modulus is defined as the ratio of stress to the strain.

[tex]Y = \frac{stress}{strain}\\\\2.5\times 10^{10}= \frac{98000}{strain}\\\\strain = 3.92\times 10^{-6}[/tex]

let the change in height is h'.

Strain is defined as the ratio of change in height to the original height.

[tex]3.92\times 10^{-6} = \frac{h'}{5}\\\\h' = 1.96\times 10^{-5}m = 0.0196 mm[/tex]

A 70.0-kg person throws a 0.0430-kg snowball forward with a ground speed of 32.0 m/s. A second person, with a mass of 58.5 kg, catches the snowball. Both people are on skates. The first person is initially moving forward with a speed of 3.30 m/s, and the second person is initially at rest. What are the velocities of the two people after the snowball is exchanged

Answers

Answer:

The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.

Explanation:

Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:

First skater

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)

Second skater

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)

Where:

[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.

[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.

[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.

[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.

[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.

[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.

If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:

By (1):

[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]

[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]

[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]

[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]

[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]

By (2):

[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]

[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]

[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]

[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]

A uniform steel rod of length 0.9 m and mass 3.8 kg has two point masses of 2.3 kg each at the two ends. Calculate the moment of inertia of the system about an axis perpendicular to the rod, and passing through its center.

Answers

Answer: [tex]2.4705\ kg.m^2[/tex]

Explanation:

Given

length of the rod is L=0.9 m

Mass of the rod m=3.8 kg

Point masses has mass of m=2.3 kg

Moment of Inertia of the rod about the center is

[tex]\Rightarrow I_o=\dfrac{1}{12}ML^2[/tex]

Moment of inertia of combined system is the sum of rod and two point masses.

[tex]\Rightarrow I=I_o+2mr^2[/tex]

[tex]\Rightarrow I=\dfrac{1}{12}3.8\times 0.9^2+2\times 2.3\times \left(\dfrac{0.9}{2}\right)^2\\\\\Rightarrow I=1.539+0.9315\\\Rightarrow I=2.4705\ kg-m^2[/tex]

The 1 kg box is sliding along a frictionless surface. It collides with and sticks to the 2 kg box. Afterward, the speed of the two boxes is:__________.
A) 0 m/s
B) 1 m/s
C) 2 m/s
D) 3 m/s
E) Not enough info

Answers

Answer:

The correct option is (E).

Explanation:

Given that,

Mass of object 1, m₁ = 1 kg

Mass of object 2, m₂ = 2 kg

They collides after the collision. We need to find the speed of the two boxes after the collision.

The initial speeds of both boxes is not given. So, we can't put the values of their speeds in the momentum conservation equation.

So, the information is not enough.

Explain what a circuit breaker is and how it helps protect your house?

Answers

Explanation:

A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overcurrent/overload or short circuit. Its basic function is to interrupt current flow after protective relays detect a fault.

Circuit breakers have been designed to detect when there is a fault in the electricity, so it will “trip” and shut down electrical flow. ... This detection is key to preventing surges of electricity that travel to appliances or other outlets, which can cause them to break down

a particle undergoes three consecutive displacement d1=(15i+30j+12k)cm,d2=(23i-14j-5.0k)cm and d3=(-13i+15j)cm find the component of the resultant displacement and magnitude?​

Answers

Answer:

Explanation:

The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.

It can also help us determine what other substances are made of using the water displacement experiment. This is done by observing how much water is displaced when an object is submerged in the water. As long as you know the density of the water, the mass of the object being submerged and the volume of increase you can calculate the density of the object.

This was done by the great Archimedes in discovering what composed the kings crown.

Which phase of matter makes up stars?
O liquid
O gas
O plasma

Answers

Answer:

The answer to this question is plasma

Answer:

Plasma

Explanation:

Calculate the volume of 10g of helium ( M= 4kg/kmol) at 25C and 600 mmHg

Answers

Answer:

T=273+25=298 K

n= m/M = 10/ 4 = 2.5

R=0.08206 L.atm /mol/k

760mmHg = 1 atm therefore

600mmHg = X atm

760 X = 600mmHg

X = 600/760 = 0.789 atm

P = 0.789 atm

V= ?

PV= nRT

0.789 V = 2.5 × 0.08206 × 298

V= 2.5 × 0.08206 ×298 / 0.789

V= 77.48 L

I hope I helped you ^_^

state the story of archimedes​

Answers

Answer:

Archimedes was born about 287 BCE in Syracuse on the island of Sicily. He died in that same city when the Romans captured it following a siege that ended in either 212 or 211 BCE. One story told about Archimedes' death is that he was killed by a Roman soldier after he refused to leave his mathematical work.

The value found for the universal gravitational constant, G, will vary depending on the materials used for the balls of a Cavendish balance. Question 11 options: True False

Answers

Answer:

false

Explanation:

took the test

find the weight of a body of mass 200kg on the earth at a latitude 30°.(R=6400 km ,g=9.8m/s²,ω=7.27×10⁻⁵ rad/sec)

Answers

Answer:

................ftf6x

What is the escape speed on a spherical asteroid whose radius is 517 km and whose gravitational acceleration at the surface is 0.636 m/s2

Answers

Answer:

810.94 m/s

Explanation:

Applying,

v = √(2gR)............. Equation 1

Where v = escape velocity of the spherical asteroid, g = acceleration due to gravity, R = radius of the earth

From the question,

Given: g = 0.636 m/s², R = 517 km = 517000 m

Substitute these values into equation 1

v = √(2×0.636×517000)

v = √(657624)

v = 810.94 m/s

Hence, the escape velocity is 810.94 m/s

Two children sit on a seesaw that is in rotational equilibrium. The first child has weight W and sits at distance d from the pivot. If the second child sits at a distance of 7*d from the pivot, what must be the weight of the second child

Answers

Answer:

W/7

Explanation:

By principle of moments,

Sum of clockwise moment = sum of anticlockwise moment

Weight × 7d = W × d

Weight = W/7

Since the two children are in rotational equilibrium, the weight of the second child is W/7.

How can the weight of the second child be determined?

The weight of the second child can be determined from the principle of moments.

The principle of moments states that for a body in equilibrium, the sum of the clockwise moments and anticlockwise moments about a point is zero.

Let the weight of the second child be X

From the principle of moments:

W × d = 7×d × X

X = W/7

Therefore, the weight of the second child is W/7.

Learn more about principle of moments at: https://brainly.com/question/20298772

Four equal-value resistors are in series with a 5 V battery, and 2.23 mA are measured. What isthe value of each resistor

Answers

Answer:

560.54 Ω

Explanation:

Applying,

V = IR'............... Equation 1

Where V = Voltage of the battery, I = currrent, R' = Total resistance of the resistors

make R' the subject of the equation

R' = V/I............ Equation 2

From the question,

Given: V = 5 V, I = 2.23 mA = 2.23×10⁻³ A

Substitute these values into equation 2

R' = 5/(2.23×10⁻³ )

R' = 2242.15 Ω

Since the fours resistor are connected in series and they are equal,

Therefore the values of each resistor is

R = R'/4

R = 2242.15/4

R = 560.54 Ω

A box that is sliding across the floor experiences a net force of 10.0 N. If the box has a mass of 1.50 kg, what is the resulting acceleration of the box g

Answers

Answer:

a = 6.67 m/s²

Explanation:

F = 10.0 N

m = 1.50 kg

a = ?

F = ma

10.0 = (1.50)a

6.67 = a

Differences between angle of twist and angle of shear

Answers

Answer:

idek

Explanation:

Drag the titles to the correct boxes to complete the pairs.

Answers

Can you input a picture??

An object is suspended by a string from the ceiling of an elevator. If the tension in the string is equal to 25 N at an instant when the elevator is accelerating downward at a rate of 2.0 , what is the mass of the suspended object

Answers

By Newton's second law, the net force on the object is

F = T - mg = - ma

where

T = 25 N, the tension in the string

• m is the mass of the object

• g = 9.8 m/s², the acceleration due to gravity

a = 2.0 m/s², the acceleration of the elevator-object system

Solve for m :

25 N - m (9.8 m/s²) = - m (2.0 m/s²)

==>   m = (25 N) / (9.8 m/s² - 2.0 m/s²) ≈ 3.2 kg

convert 2.4 milimetre into metre​

Answers

Answer is 0.0024

Explanation

divide the length value by 1000.

The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, l, what combination of g and l must the period be proportional to

Answers

Explanation:

Let T is the period of a pendulum. The SI unit of time is seconds (s).

It depends on the acceleration of gravity, g, and the length of the pendulum, l.

The SI unit of acceleration of gravity, g and the length of the pendulum, l are m/s² and m respectively.

If we divide m and m/s², we left with s². If the square root of s² is taken, we get s only i.e. the SI unit of period of a pendulum.

So,

[tex]T\propto \sqrt{\dfrac{l}{g}}[/tex]

Hence, this is the required solution.

Two identical cylinders with a movable piston contain 0.7 mol of helium gas at a temperature of 300 K. The temperature of the gas in the first cylinder is increased to 412 K at constant volume by doing work W1 and transferring energy Q1 by heat. The temperature of the gas in the second cylinder is increased to 412 K at constant pressure by doing work W2 while transferring energy Q2 by heat.

Required:
Find ÎEint, 1, Q1, and W1 for the process at constant volume.

Answers

Answer:

ΔE[tex]_{int[/tex],₁ = 977.7 J , Q₁ = 977.7 J and W₁ = 0 J

Explanation:

Given the data in the question;

T[tex]_i[/tex] = 300 K, T[tex]_f[/tex] = 412 K, n = 0.7 mol

since helium is monoatomic;

Cv = (3/2)R, Cp = (5/2)R

W₁ = 0 J [ at constant volume or ΔV = 0]

Now for the first cylinder; from the first law of thermodynamics;

Q₁ = ΔE[tex]_{int[/tex],₁ +  W₁

Q₁ = ΔE[tex]_{int[/tex],₁ = n × Cv × ΔT

we substitute  

Q₁ = ΔE[tex]_{int[/tex],₁ = 0.7 × ( 3/2 )8.314 × ( 412 - 300 )

Q₁ = ΔE[tex]_{int[/tex],₁ = 0.7 × 12.471 × 112

Q₁ = ΔE[tex]_{int[/tex],₁ = 977.7 J

Therefore, ΔE[tex]_{int[/tex],₁ = 977.7 J , Q₁ = 977.7 J and W₁ = 0 J

A wire 54.6 cm long carries a 0.480 A current in the positive direction of an x axis through a magnetic field with an x component of zero, a y component of 0.000420 T, and a z component of 0.0130 T. Find the (a) x, (b) y, and (c) z components of the magnetic force on the wire.

Answers

Answer:

wire 66.0 cm long carries a 0.750 A current in the positive direction of an x axis through a magnetic field $$\vec { B } = ( 3.00 m T ) \hat { j } ...

Top answer · 1 vote

A horse gallops a distance of 10 kilometers in a time of 30 minutes its average speed is?

Answers

Answer:

20 km/hr

Explanation:

Distance = 10km

Time = 30 minutes = 1/2 hour

Average Speed = Total distance / Total Time Taken

                           = 10 ÷  1/2

                           = 10 x 2

                           = 20 km/hr

Average speed = (distance covered) / (time to cover the distance)

Average speed = (10 km) / (30 minutes)

Average speed =  1/3 km/min

Most people would probably want to see it in a more convenient, more familiar unit, such as km/hour or m/second.

(10 km / 30 min) x (60 min / hour) = (10 x 60 / 30) (km-min / min-hour)

Average speed = 20 km/hour

AvgSpd = (10 km / 30 min) x (1,000 m / km) x (min / 60 sec)

AvgSpd = (10x1,000 / 30x60) (km-m-min / min-km-sec)

Averge Speed =  5.56 m/s

Explain the following defects of a simple electric cell:

a.Polarization,

ß. Local action.​

Answers

Answer:

Explanation:

The two major defects of simple electric cells causes current supplied to be for short time. These defects are: polarization and local action.

a. Polarization: This is a defect caused by an accumulation of hydrogen bubbles at the positive electrode of the cell. It can be prevented by the use of vent, using a hydrogen absorbing material or the use of a depolarizer.

b. Local Action: This is the gradual wearing away of the electrode due to impurities in the zinc plate. It can be controlled by the amalgamation of the zinc plate before it is used.

Hi can someon help me how to answer this?
Btw I'm from Philippines

Answers

Answer:

Test 1

1.True

2.True

3.True

4.False

5.True

6.True

7.False

8.True

9.True

10.True

yung iba nasa pic

Part AFind the x- and y-components of the vector d⃗ = (4.0 km , 29 ∘ left of +y-axis).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.d⃗ = km Part BFind the x- and y-components of the vector v⃗ = (2.0 cm/s , −x-direction).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.v⃗ = cm/s Part CFind the x- and y-components of the vector a⃗ = (13 m/s2 , 36 ∘ left of −y-axis).Express your answer using two significant figures. Enter the x and y components of the vector separated by a comma.a⃗ x = m/s2

Answers

Solution :

Part A .

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, d = [tex]\text{4 km 29}[/tex] degree left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -4 x sin (29°) = -1.939 km

           [tex]y[/tex] component is = 4 x cos (29°) = 3.498 km

Part B

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{v = 2 cm/s}[/tex] , [tex]\text{-x direction}[/tex]

So the [tex]x[/tex] component is = -2 cm/s

           [tex]y[/tex] component is = 0

Part C

Given : The [tex]x[/tex] and [tex]y[/tex] components of the vector, [tex]\text{a = 13 m/s, 36 degree}[/tex] left of [tex]y[/tex]-axis.

So the [tex]x[/tex] component is = -13 x sin (36°) = -7.6412 [tex]m/S^2[/tex]

           [tex]y[/tex] component is = -13 x cos (36°) = -10.517 [tex]m/S^2[/tex]

The x- and y-components of the vectors  is mathematically given as as follows for each Part respectively

x= -1.939 km, y= 3.498 km

x= -2 cm/s, 0

y=, x= -7.6412m/s^2, -10.517m/s^2

What are the x- and y-components of the vectors?

Question Parameters:

Generally, we follow a basic principle where

x component= Fsin\theta

y component= Fcos\theta

Therefore

For A

x component is

x= -4 x sin (29°)

x= -1.939 km

 y component is

y= 4 x cos (29°)

y= 3.498 km

For B

x component is

x= -2 cm/s            

y component is

y= 0

For C

x component is

x= -13 x sin (36°)

x= -7.6412m/s^2      

y component is

y= -13 x cos (36°)

y= -10.517m/s^2  

Read more about Cartession co ordinate

https://brainly.com/question/9410676

An automobile engine has an efficiency of 22.0% and produces 2510 J of work. How much heat is rejected by the engine

Answers

Answer:

If efficiency is .22 then  W = .22 * Q   where Q is the heat input

Heat Input    Q = 2510 / .22 = 11,400 J

Heat rejected = 11.400 - 2510 = 8900  J of heat wasted

Also, 8900 J / (4.19 J / cal) = 2120 cal

An efficiency is the measure of productivity of an engine. The heat rejected by the engine is 8900 Joules.

What is efficiency?

An efficiency of a heat engine is the ratio of the work done and heat supplied.

Given is the automobile engine has the efficiency 22% and Work done is 2510 Joules.

The efficiency is written as,

η= W / Qs.

The work done is W= Qs - Qr, where Qr is the rejected heat.

The heat rejected can be represented as

Qr = W ( 1/η -1)

Substituting the value into the equation, we get the rejected heat.

Qr = 2510 (1/0.22 -1)

Qr = 8900 Joules.

Thus, the heat rejected by the engine is 8900 Joules.

Learn more about efficiency.

#SPJ2

The thrust F of a screw propeller is known to depend upon the diameter d, Speed of advance v, fluid density e, revolution per second N, and the coefficient of viscosity M, of the fluid. Find the expression for F, in terms of the quantities

Answers

Answer:

[tex]{ \bf{F = { \tt{ \frac{4}{3} \pi {r}^{3}v gM}}}}[/tex]

b) Two skaters collide and grab on to each other on a frictionless ice. One of them, of mass 80 kg, is moving to the right at 5.0 m/s, while the other of mass 70 kg is moving to the left at 2.0 m/s. What are the magnitude and direction of the two skaters just after they collide

Answers

Answer:

The two skaters move with a speed of 1.73 m/s after the collision in the right direction.

Explanation:

Given that,

The mas of skater 1, m₁ = 80 kg

The speed of skater 1, u₁ = 5 m/s (right)

The mass of skater 2, m₂ = 70 kg

The speed of skater 2, u₂ = -2 m/s (left)

Let v is the magnitude of the two skaters just after they collide. They must have a common speed. So, using the conservation of momentum as follows :

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\\v=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}[/tex]

Put all the values,

[tex]v=\dfrac{80(5)+70(-2)}{(80+70)}\\\\=1.73m /s[/tex]

So, the two skaters move with a speed of 1.73 m/s after the collision in the right direction.

When you hammer a nail into wood, the nail heats up. 30 Joules of energy was absorbed by a 5-g nail as it was hammered into place. How much does the nail's temperature increase (in °C) during this process? (The specific heat capacity of the nail is 450 J/kg-°C, and round to 3 significant digits.

Answers

Answer:

13.33 K

Explanation:

Given that,

Heat absorbed, Q = 30 J

Mass of nail, m = 5 g = 0.005 kg

The specific heat capacity of the nail is 450 J/kg-°C.

We need to find the increase in the temperature during the process. The heat absorbed in a process is as follows:

[tex]Q=mc\Delta T\\\\\Delta T=\dfrac{Q}{mc}\\\\\Delta T=\dfrac{30}{0.005\times 450}\\\\=13.33\ K[/tex]

So, the increase in temperature is 13.33 K.

Other Questions
Once again, move points C, D, and E on the circle, and complete the table below. This time, youll consider what happens to the lengths of the sides of quadrilateral BCDE. Notice that mB is predetermined, so set that angle measure first. The elevation of any landform is measured by the________ Is x=-2 a solution for the equation below? A cylinder has a height of 16 cm and a radius of 5 cm.A cone has a height of 12 cm and a radius of 4 cm.if the cone is placed inside the cylinder as shown,what is the volume of the air space surrounding the cone inside the cylinder help please ITS OF TRIGONOMETRYPROVE QUESTION 11Which of the following is an important consideration in setting up the proper environment to complete tasks on time? which province of nepal has no area in the terai region? A baseball pitcher throws a 0.14 kg ball toward a batter who is 18 m away.The ball is traveling at 40 m/s when it leaves the pitcher's hand. What is theball's kinetic energy at this point?A. 112 JOB. 224 JC. 12JD. 3 JSUBMIT please help, will give brainliest for correct answer A supervisor records the repair cost for 22 randomly selected VCRs. A sample mean of $75.50 and standard deviation of $18.07 are subsequently computed. Determine the 99% confidence interval for the mean repair cost for the VCRs. Assume the population is approximately normal. Step 1 of 2 : Find the critical value that should be used in constructing the confidence interval. Round your answer to three decimal places. Please help!Which term is best described as a series of ridges and mounds that protect the marshes of Louisiana from hurricanes?A) estuariesB) salt domesC) cheniersD) terraces Which quadrilateral has equal diagonalsSelect one:a. trapezoidb. rectanglec. parallelogramd. rhombus (-4)-(+2)= PLS HELPPP MEEEEEEE A recipe requires 500 mL of milk. You will make the recipe once a month for the next 4 months. You do not use milk other than for cooking. Which container of milk should you buy? (1L=1000 mL) * What is the image of the point (3, 2) after a rotation of 90 counterclockwise about the origin? A firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $1,782,000. Selling prices and cost information for both products follow. The contribution margin per composite unit is: what should be done to the people who violate the social rules (3sqrt(3)-2sqrt(2))(sqrt(3)-sqrt(2)) why should we developed good character write any five points Amanda has 1 3/4yds of red ribbon and 7/8yds of greenribbon. What is the total amount of ribbon thatAmanda has? (write answer as a fraction)