With respect to the average cost curves, the marginal cost curve: Intersects average total cost, average fixed cost, and average variable cost at their minimum point b. Intersects both average total cost and average variable cost at their minimum points Intersects average total cost where it is increasing and average variable cost where it is decreasing d. Intersects only average total cost at its minimum point

Answer:

yes it is right now you can write it

The length of a side of the square is 8 cm.

What do you mean by perimeter of a rectangle and square?

When a wire is bent into the shape of a rectangle, its length becomes the perimeter of the rectangle. Similarly, when the wire is reshaped into a square, its length becomes the perimeter of the square.

The perimeter of a rectangle is given by the formula [tex]P=2(l+w)[/tex] , where [tex]l[/tex] is the length and [tex]w[/tex] is the width.

The perimeter of a square is given by the formula [tex]P=4s[/tex] , where [tex]s[/tex] is the length of a side.

Calculating the length of a side of the square:

The length of the rectangle is 11 cm and the width is 5 cm.

Therefore, the perimeter of the rectangle is [tex]P=2(11+5)=32[/tex] cm.

Since the wire is reshaped into a square, the perimeter of the square is also 32 cm.

Using the formula [tex]P=4s[/tex], we can solve for the length of a side of the square:

[tex]32 = 4s[/tex]

[tex]s = 32/4[/tex]

[tex]s = 8[/tex]

Therefore, the length of a side of the square is 8 cm.

To know more about square visit :

brainly.com/question/28776767

#SPJ1

Answer:

Step-by-step explanation:

As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.

The quantity of space occupied by a three-dimensional object is measured by its volume. Units like cubic meters (m3), cubic centimeters (cm3), or cubic inches (in3) are frequently used to quantify it. Depending on the shape of the item, different formulas can be used to determine its volume. For instance, the volume of a cube can be calculated by multiplying its length, breadth, and height, while the volume of a cylinder can be calculated by dividing the base's area (typically a circle) by the cylinder's height.

given

We must apply the calculation for the volume of a cone's frustum in order to determine the volume of the Styrofoam collar:

[tex]V = (1/3)\pi h(R^2 + Rr + r^2)[/tex]

where h is the height of the frustum, r is the small radius, and R is the large radius.

Given the numbers, we can determine:

R = 5 in.

3 centimeters is r.

24 inches tall

With these numbers entered into the formula, we obtain[tex]V = (1/3)\pi (24)(5^2 + 5*3 + 3^2)\\\\ 179.594 cubic inches[/tex]

As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.

To know more about volume visit :-

https://brainly.com/question/13338592

#SPJ1

Jen has 54 pages left to read to meet her assignment requirement.

The inequality that represents this situation is p ≥ 85 - 31

To find how many pages Jen has left to read, we can subtract the number of pages she has already read from the minimum number of pages she needs to read.

The minimum number of pages Jen needs to read is 85, and she has already read 31 pages. So, the number of pages she has left to read, p, can be found by:

p = 85 - 31

p = 54

Therefore, Jen has 54 pages left to read.

To represent this situation with an inequality, we can use:

p ≥ 85 - 31

This inequality states that the number of pages Jen still needs to read, p, must be greater than or equal to the difference between the minimum number of pages she needs to read (85) and the number of pages she has already read (31).

Solving for p:

p ≥ 85 - 31

p ≥ 54

This means that Jen must read at least 54 more pages to meet her assignment requirement.

To learn more about inequality Click here:
brainly.com/question/30228778

#SPJ4

(a) Symbol used for sample standard deviation is “s” or “σˆ” (s-hat). The unit for the sample standard deviation is grams, as it is calculated from a sample.

(b) Symbol used for population standard deviation is “σ” (sigma).The unit for the population standard deviation is also grams, as it is calculated for the entire population.

The population standard deviation is a parameter, which is a fixed value calculated from every individual in the population.

A sample standard deviation is a statistic. This means that it is calculated from only some of the individuals in a population. Since the sample standard deviation depends upon the sample, it has greater variability.

(c) Symbol used for sample variance is “s²” or “σ²ˆ” (sigma-hat squared). The unit for the sample variance is grams², as it is calculated from a sample.

(d) Symbol used for population variance is “σ²” (sigma squared). The unit for the population variance is also grams², as it is calculated for the entire population.

Population variance refers to the value of variance that is calculated from population data, and sample variance is the variance calculated from sample data.

Due to this value of denominator in the formula for variance in case of sample data is ‘n-1’, and it is ‘n’ for population data. As a result both variance and standard deviation derived from sample data are more than those found out from population data.

To learn more about sample and population refer :

https://brainly.com/question/9295991

#SPJ11

Therefore, we have the values of:

a = -g(x) for -10 < x < -8

b = lower limit of the range where g(x) = -6

c = -C for -1 < x < 1

d = upper limit of the range where g(x) = 4

e = we cannot determine the value of e based on the given information.

In mathematics, a function is a rule that assigns a unique output value for every input value in its domain. It is a relation between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. Functions are often represented by a formula or an equation, but they can also be defined in other ways, such as through graphs, tables, or verbal descriptions. They are used to model a wide variety of phenomena in science, engineering, economics, and many other fields.

Here,

We can find the values of a, b, c, d, and e by examining the given information:

For -15 < x < -10: g(x) = -(-10) = 10

For -10 < x < -8: g(x) = -a

For -1 < x < 1: g(x) = -C

For b < x < l: g(x) = -(-6) = 6

For 10 < x < 15: g(x) = -8

For d < x < e: the value of g(x) is not specified in the given information, so we cannot determine the value of e based on this.

To know more about function,

https://brainly.com/question/28193995

#SPJ1

As a result, Lara made a $6,262.71 initial deposit into her savings account.

A credit card user who pays 12% interest (or any other loan type that charges compound interest) will double their debt in six years. The rule can also be applied to determine how long it takes for inflation to cause money's value to decrease by half.

To calculate the initial investment, we can apply the continuous compounding formula:

A = Pe(rt)

Where:

A = the current balance ($7,000.00)

P = the initial deposit (unknown)

r = the annual interest rate (11% or 0.11 as a decimal)

t = the time in years (1 year)

Plugging in these values, we get:

$7,000.00 = Pe(0.11 * 1)

A shorter version of the exponential expression:

$7,000.00 = Pe0.11

$7,000.00 = P * 1.1166 (rounded to 4 decimal places)

Dividing both sides by 1.1166:

P = $6,262.71 (rounded to the nearest cent)

To know more about initial deposit visit:-

https://brainly.com/question/21845455

#SPJ1

Answer: Let x be the number of hamburgers sold.

Then, the number of cheeseburgers sold is 3x.

The total number of burgers sold is x + 3x = 4x.

Given that the total number of burgers sold is 416, we have:

4x = 416

x = 416/4

x = 104

Therefore, 104 hamburgers were sold.

Step-by-step explanation:

The types of inferences that will be made about population parameters are causation, estimation, and regression on the basis of relationship.

Causation is the process of showing the cause-and-effect relationship between two variables. In this case, one variable influences the other variable. This type of inference is significant when making decisions because it helps us understand how a change in one variable leads to a change in another variable.

Estimation: In statistical analysis, estimation refers to determining the possible value of an unknown population parameter. It is impossible to calculate the population parameters directly, and hence we use sample statistics to estimate them.

Regression analysis is the statistical technique used to identify the relationship between two variables. It involves estimating the coefficients of the model that best fit the data.

This type of inference helps us predict the value of a dependent variable based on an independent variable.

Learn more about Inferences here:

https://brainly.com/question/29774121

#SPJ11

If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle. Also if a circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long then length of the arc subtended by the angle's rays 8.4 cm. Another circle is centered at the vertex of the angle then arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.

a.) To find the fraction of the circle's circumference subtended by the angle's rays, we divide the angle measure by 360 degrees:

fraction of circle's circumference = 140/360

Simplifying this fraction, we get:

fraction of circle's circumference = 7/18

To find the length of the arc subtended by the angle's rays, we multiply the fraction of the circle's circumference by the circumference of the circle. Let's call the circumference of the circle "C":

length of arc = (7/18)*C

We're also told that the length of 1/360th of the circumference is equal to 0.06 cm. So, we can write:

(1/360)*C = 0.06

Multiplying both sides by 360, we get:

C = 360*0.06 = 21.6 cm

Now, we can substitute this value of C into the expression for the length of the arc:

length of arc = (7/18)*C

length of arc = (7/18)*(21.6)

length of arc = 8.4 cm (rounded to one decimal place)

Therefore, the length of the arc subtended by the angle's rays is 8.4 cm.

b.) We're given that 1/360th of the circumference of the circle is 0.06 cm long. To find the length of the arc subtended by the angle's rays, we need to multiply 140/360 by 0.06:

length of arc = (140/360)*0.06

length of arc = 0.0233 cm (rounded to four decimal places)

Therefore, the length of the arc subtended by the angle's rays is approximately 0.0233 cm.

c.) We're told that the length of the arc subtended by the angle's rays is 70 cm. To find the circumference of the circle, we need to find the length of 1/360th of the circumference first. We can do this by dividing 70 by 1/360:

(1/360)*C = 70

Multiplying both sides by 360, we get:

C = 70*360 = 25,200 cm

Therefore, the circumference of the circle is 25,200 cm. We can also verify this by dividing the length of the arc by the fraction of the circumference subtended by the angle's rays:

length of arc = (7/18)*C

C = (18/7)*length of arc

C = (18/7)*70

C = 180 cm (rounded to one decimal place)

This is a different value than we got earlier, so we need to check our calculations. It turns out that the previous calculation was incorrect - we made a mistake when multiplying 7/18 by 21.6. The correct calculation gives us:

length of arc = (7/18)*C

length of arc = (7/18)*(21.6)

length of arc = 8.4 cm (rounded to one decimal place)

Now, we can calculate the circumference of the circle:

length of arc = (7/18)C

C = (18/7) *length of arc

C = (18/7) *70

C = 180 cm (rounded to one decimal place)

Therefore, the circumference of the circle is 180 cm.

Also, If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle.

b. A circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long.The length of the arc subtended by the angle's rays 8.4 cm

c. Another circle is centered at the vertex of the angle.

The arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.

To practice more questions about circumference:

https://brainly.com/question/27447563

#SPJ11

Yes, every odd integer can be written as the difference of two squares.

To prove this, let k be a positive integer. Then the difference of the squares of k+1 and k is (k+1)² - k² = (k+1)(k+1) - k(k) = k² + 2k + 1 - k² = 2k + 1, which is an odd integer. Thus, every odd integer can be written as the difference of two squares.

To prove this, we first chose a positive integer, k. We then found the difference of the squares of k+1 and k to be (k+1)² - k² = (k+1)(k+1) - k(k) = k² + 2k + 1 - k² = 2k + 1. Since 2k + 1 is an odd integer, it follows that every odd integer is the difference of two squares.

To know more about squares click on below link:

https://brainly.com/question/13747846#

#SPJ11

There are 169 outcomes in the complement of the given event.

To find the number of outcomes in the complement of the given event, which is that out of 344 high school students in their senior year, 175 are left-handed, you need to follow a few steps. So, let's get started. To find the number of outcomes in the complement of the given event, you will first find the total number of students that are right-handed, which can be found by subtracting the number of left-handed students from the total number of students:344 - 175 = 169Therefore, there are 169 right-handed students.

Next, to find the number of outcomes in the complement of the given event, you will need to subtract the number of outcomes in the given event from the total number of possible outcomes. Since the number of possible outcomes is equal to the total number of students, the number of outcomes in the complement of the given event can be found by subtracting the number of left-handed students from the total number of students:344 - 175 = 169 Therefore, there are 169 outcomes in the complement of the given event.

Learn more about Complement

brainly.com/question/13058328

#SPJ11

Answer:

x = 45.

Step-by-step explanation:

Given a straight line with the equation.

First collect like terms:

2x + x = 180 - 45

Then calculate:

3x = 135

Finally after dividing both sides by 3:

x = 45

The  value of x in the interval (3 < x < 6) for which the rate of change of the cost is zero.

(a) To verify that C(3) < C(6), we have to find the values of C(3) and C(6).The given function is C(x) = s(x x+3)The order size is measured in hundreds. So, when x = 3, the order size is 300 and when x = 6, the order size is 600.Therefore, C(3) = s(3 x 3+3) = s(18) and C(6) = s(6 x 6+3) = s(39)Now, as s(x) > 0, we can see that C(6) > C(3). Hence, C(3) < C(6).(b) According to Rolle's Theorem, the rate of change of the cost must be 0 for some order size in the interval (3 < x < 6).We know that the function is continuous and differentiable in the interval (3 < x < 6). Now, the rate of change of the cost is given by the derivative of the function C(x) with respect to x.C(x) = s(x x+3)C'(x) = s[1 + (x + 3) . 1] = s(1 + x + 3) = s(x + 4)As per Rolle's Theorem, there must exist a value of x in the interval (3 < x < 6) such that C'(x) = 0.So, s(x + 4) = 0x + 4 = 0x = -4Thus, the order size is -4 x 100 = -400. However, this is an absurd answer as the order size cannot be negative. Therefore, there is no value of x in the interval (3 < x < 6) for which the rate of change of the cost is zero.

Learn more about Interval

brainly.com/question/4184136

#SPJ11

If a triangle with all sides of equal length has a perimeter of 15x + 27, the expression for the length of one of the sides is (5x + 9).

The perimeter of a triangle is the sum of the lengths of all three sides. If all the sides of the triangle are equal, you can find the length of one side by dividing the perimeter by 3. Here, the perimeter is given as 15x + 27. Therefore, the length of one side will be (15x + 27) / 3 = 5x + 9. Hence, an expression for the length of one of the sides is (5x + 9).

Learn more about expression here: https://brainly.com/question/1859113.

#SPJ11

Answer:

-1/3

Step-by-step explanation:

Answer:

-1/3

Step-by-step explanation:

Answer:

Y=x^2+7x-3

complete the square to re-write the quadratic function in vertex form.

pls help

Step-by-step explanation:

To complete the square, we need to add and subtract a constant term inside the parentheses, which when combined with the quadratic term will give us a perfect square trinomial.

y = x^2 + 7x - 3

y = (x^2 + 7x + ?) - ? - 3 (adding and subtracting the same constant)

y = (x^2 + 7x + (7/2)^2) - (7/2)^2 - 3 (the constant we need to add is half of the coefficient of the x-term squared)

y = (x + 7/2)^2 - 49/4 - 3

y = (x + 7/2)^2 - 61/4

So the quadratic function in vertex form is y = (x + 7/2)^2 - 61/4, which has a vertex at (-7/2, -61/4).

Yes, W_2 = {p_2 = a_2t_2 + a_1t + a_0 ∈ ℙ_2 | a_0 = 2} is a subspace of the vector space ℙ_2.

Yes, W_1 = {[a b c; d 0 0] ∈ M_{2x3} | b = a + c} is a subspace of the vector space M_{2x3}.

Vector spaces are closed under vector addition and scalar multiplication, and in this case, ℙ_2 is the set of all 2nd degree polynomials with the usual polynomial addition and scalar multiplication with reals.

Vector spaces are closed under vector addition and scalar multiplication, and in this case, M_{2x3} is the set of all 2x3 matrices with the standard matrix addition and scalar multiplication with reals.

To know more about vector space: https://brainly.com/question/17142918

#SPJ11

Answer: 54 square in

Step-by-step explanation:

I don't know if this is the same person but I answered this same question just now please check my profile or comment if you want the explanation

As per the equations, the two dogs are either 11 years old and 4 years old, or 4 years old and 11 years old.

Factoring is the process of breaking down a mathematical expression or number into its component parts, which can then be multiplied together to give the original expression or number. In algebra, factoring is often used to simplify or solve equations.

An equation is a statement that shows the equality of two expressions, typically separated by an equals sign (=). The expressions on both sides of the equals sign are called the "left-hand side" and "right-hand side" of the equation.

In the given question,

Let's call the age of the first dog "x" and the age of the second dog "y". We know that their ages add up to 15, so we can write:

x + y = 15

We also know that their ages multiply to 44, so we can write:

x * y = 44

Now we have two equations with two unknowns, which we can solve simultaneously to find the values of x and y.

One way to do this is to use substitution. From the first equation, we can solve for one variable in terms of the other:

y = 15 - x

We can substitute this expression for y into the second equation:

x × (15 - x) = 44

Expanding the left side, we get:

15x - x^2 = 44

Rearranging and simplifying, we get a quadratic equation:

x^2 - 15x + 44 = 0

We can factor this equation as:

(x - 11)(x - 4) = 0

Using the zero product property, we know that this equation is true when either (x - 11) = 0 or (x - 4) = 0.

Therefore, the possible values of x are x = 11 and x = 4.If x = 11, then y = 15 - x = 4, which means that the ages of the two dogs are 11 and 4.

If x = 4, then y = 15 - x = 11, which means that the ages of the two dogs are 4 and 11.

Therefore, the two dogs are either 11 years old and 4 years old, or 4 years old and 11 years old.

To know more about equations, visit:

https://brainly.com/question/10413253

#SPJ1

The 12 months of age) as percentiles of the CDC growth chart reference population.

The most likely description of Sarah's weights (at 3, 6, 9, and 12 months of age) as percentiles of the CDC growth chart reference population is: 85th percentile at 3 months; 85th percentile at 6 months; 90th percentile at 9 months; 95th percentile at 12 months.What is percentile in statistics?In statistics, a percentile is a value below which a specific percentage of observations in a group falls. It is used to split up data into segments that represent an equal proportion of the entire group, resulting in a data set split into 100 equal portions, with each portion representing one percentage point. Sarah's weight is in the 85th percentile at 3 months, 85th percentile at 6 months, 90th percentile at 9 months, and 95th percentile at 12 months is a most likely description of her weights (at 3, 6, 9, and 12 months of age) as percentiles of the CDC growth chart reference population.

Learn more about Percentiles

brainly.com/question/28800128

#SPJ11

the sale price of the cell phone after the 35% discount is $315.25.

How to solve and what is sale?

To find the sale price of the cell phone, we need to apply the discount of 35% to the regular price of $485. We can do this by multiplying the regular price by 0.35 and then subtracting the result from the regular price:

Sale price = Regular price - Discount amount

Sale price = $485 - (0.35 x $485)

Sale price = $485 - $169.75

Sale price = $315.25

Therefore, the sale price of the cell phone after the 35% discount is $315.25.

A sale is a temporary reduction in the price of a product or service. Sales are often used by businesses to attract customers and increase sales volume. Sales can be offered for many reasons, such as to clear out inventory, promote a new product, or attract customers during a slow period.

In a sale, the price of a product or service is discounted, either by a fixed amount or by a percentage of the regular price. For example, a store might offer a 20% discount on all clothing items, or a car dealership might offer a $5,000 discount on a particular model of car.

To know more about Selling related questions, visit:

https://brainly.com/question/30615010

#SPJ1

The given parametric equations are X(t) = -3/2 + 2t and y(t) = vt² + 16, the rate of change of y with respect to "t" when t = 3 is 6v

We have the parametric equations that are X(t) = -3/2 + 2t and y(t) = vt² + 16.

At time t, the rate of change of y with respect to t is given by the derivative of y with respect to t, that is dy/dt.

So, y(t) = vt² + 16

Differentiating with respect to t, we get

⇒ dy/dt = 2vt.

Now, t = 3 gives us,

y(3) = v(3)² + 16 ⇒ 9v + 16.

Therefore, the rate of change of y with respect to t at t = 3 is

dy/dt ⇒ 2vt ⇒ 2v(3) ⇒ 6v.

To know more about the "parametric equations": https://brainly.in/question/29359537

#SPJ11

The solutions to the equation are x = -4 and x = 1.

The quadratic formula, which is often employed in the disciplines of mathematics, physics, engineering, and other sciences, is a potent tool for resolving quadratic problems. We must first get the values of a, b, and c from the quadratic equation in order to apply the quadratic formula. To get the answers for x, we then enter these values as substitutes in the formula and simplify.

The given equation is 4x² + 6x - 13 = 3x².

Rearranging the equation we have:

x² + 6x - 13 = 0

The quadratic formula is given as:

x = (-b ± √(b² - 4ac)) / 2a

Substituting the values of a = 1, b = 6, and c = -13.

x = (-6 ± √(6² - 4(1)(-13))) / 2(1)

x = (-6 ± √(100)) / 2

x = (-6 ± 10) / 2

x = -8/2 or x = 2/2

x = -4 or x = 1

Hence, the solutions to the equation are x = -4 and x = 1

Learn more about quadratic formula here:

https://brainly.com/question/2615966

#SPJ1

The given conditional statements are false, true, false, True.

They are determined by following:

(a) False - The statement "If 10<7,10<7, then 3=43=4" is false, since 10 is not less than 7.
(b) True - The statement "If 7<10,7<10, then 3=43=4" is true, since 7 is less than 10.
(c) False - The statement "If 10<7,10<7, then 3+5=83+5=8" is false, since 10 is not less than 7.
(d) True - The statement "If 7<10,7<10, then 3+5=83+5=8" is true, since 7 is less than 10.

Conditional statements are used in mathematics and logic to express relationships between events and conditions. These statements consist of an "if-then" structure, where the "if" clause is the antecedent or condition, and the "then" clause is the consequent or outcome.

The truth value of the conditional statement depends on whether the condition is true or false. If the condition is true, then the outcome is also true, and the statement is considered true.

If the condition is false, then the outcome may be true or false, and the statement is considered false. Conditional statements are widely used in mathematical proofs, programming, and reasoning to establish logical connections between different events and conditions.

To learn more about the 'conditional statement':

https://brainly.com/question/11073037

#SPJ11

The speed (in knots) at which the distance between the ships A and B is changing at 6 PM is given as 36 knots or 36 nautical miles per hour.

Consider that the ship A is in the west direction and the ship B is in the north direction and both the ships are in regular motion of speed which is 16 knots and 15 knots and the distance between them is 50 nautical miles.

Using the Pythagoras theorem, the relation of the distance x which represents the distance between ships at 6PM to the distances that each ship has travelled can be given as follows:

x^2 = (50 + 16t)^2 + (15t)^2

where, t is the number of hours that has passed since noon.

Differentiating both sides of the above equation with respect to time, we get:

2x*(dx/dt) = 2(50 + 16t)*(16) + 2*(15t)*(15)

t = 6, at 6 PM, therefore substituting the value and solving, we get:

2x(dx/dt) = 2[(50 + 16(6)]*(16) + 2*[15(6)]*(15)

2x(dx/dt) = 4194

dx/dt = 2097/x

Now substituting the value of x that corresponds to 6 PM:

x^2 = (50 + 16(6))^2 + (15(6))^2

x^2 = 3385

x = √3385 ≅ 58.19

Putting this value in dx/dt, we get:

dx/dt = 2097/58.19 ≅ 36.00 knots

Learn more about Pythagoras theorem at:

brainly.com/question/343682

#SPJ4

The equation of line B is y = (1/5)x + 0, which can be simplified to y = (1/5)x.

An equation is a statement that shows the equality between two expressions. It typically contains one or more variables and may involve mathematical operations such as addition, subtraction, multiplication, division, exponentiation, or roots. An equation can be solved by finding the value(s) of the variable(s) that make the equation true. Equations are used extensively in mathematics, science, engineering, and other fields to describe relationships between different quantities and to make predictions or solve problems.

Here,

Since line B is perpendicular to line A, the product of their gradients is -1. Therefore, the gradient of line B is 1/5.

a) To find the y-intercept of line B, we need to know a point on the line. Since we don't have one, we can use the fact that the y-intercept is the point where the line intersects the y-axis. To find this point, we can set x = 0 in the equation of line B:

y = (1/5)x + c

0 = (1/5)(0) + c

c = 0

Therefore, the y-intercept of line B is (0,0).

b) The equation of line B is y = (1/5)x + 0, which can be simplified to y = (1/5)x.

To know more about equation,

https://brainly.com/question/2228446

#SPJ1

Answer:

[tex]x = 4\sqrt{3}[/tex]

Step-by-step explanation:

The triangle is right-angled

In a right-angled triangle, the following equality holds

[tex]\tan x = \dfrac{\text{Side Opposite x}}{\text{Side adjacent to x}}\\\\\tan 30 = \dfrac{4}{x}\\\\[/tex]

[tex]\tan 30 = \dfrac{1}{\sqrt{3}}\\\\\dfrac{1}{\sqrt{3}} = \dfrac{4}{x}\\\\[/tex]

Cross multiply:
[tex]1 \times x = 4 \times \sqrt{3}\\\\x = 4\sqrt{3}[/tex]

Answer:

10 sides

Step-by-step explanation:

We can use the formula for the sum of the interior angles of a polygon to solve this problem. The formula for the sum of the interior angles of a polygon with n sides, where S is the sum of the interior angles, and n is the number of sides of the polygon is:

S = (n - 2) x 180 degrees

If the sum of the interior angles is 1440 degrees, we can set this equal to the formula and solve for n:

1440 = (n - 2) x 180

Dividing both sides by 180, we get:

8 = n - 2

Adding 2 to both sides, we get:

n = 10

Therefore, a polygon with a sum of interior angles of 1440 degrees has 10 sides.