This statement False. While both Wi-Fi networks and cellular networks allow devices to connect wirelessly and communicate with each other, they operate in different ways.
What is wireless network ?A wireless network is a type of computer network that allows devices to connect and communicate with each other wirelessly. In a wireless network, devices communicate using radio frequency (RF) signals, rather than being connected by physical cables.There are several different types of wireless networks, including Wi-Fi networks, cellular networks, and Bluetooth networks. Each type of wireless network has its own characteristics and is used for different purposes.Cellular networks operate on the principle of wireless wide area networking (WWAN). They use RF signals to transmit data between devices that are connected to the network, but they also use a system of cell towers and base stations to provide coverage over a large geographic area. Cellular networks are typically used to provide voice and data services to mobile devices, such as smartphones and tablets.To learn more about Wi-Fi refer :
https://brainly.com/question/21286395
#SPJ4
eigrp authentication ensures that routers only accept routing information from other routers that have been configured with the same password or authentication information
EIGRP supports MD5 for authentication. When enabled, routers verify the origin of each packet containing a routing update.
Why is it important to configure authentication with EIGRP?
It's critical to keep in mind that this system is only for authentication. The routing update packets are not encrypted by the routers before they are sent via the network. These packets are simply authenticated using MD5. This stops users from deliberately or unintentionally inserting routes into your network.
EIGRP supports MD5 for authentication. When enabled, routers verify the origin of each packet containing a routing update. False EIGRP adjacency cannot be established by an attacker thanks to the following settings. The result of bogus adjacency may be poisoning of the routing table or CPU overuse.
To learn more about EIGRP visit:https://brainly.com/question/29038683
#SPJ4
A_______type of bn is a new type of lan/bn architecture made possible by intelligent, high speed switches that assign computers to lan segments via software, rather than by hardware.
A routed backbone guarantees that broadcast messages remain in the network segment (i.e., subnet) to which they are intended and are not transmitted to all machines.
What is the name of a network’s backbone?A backbone or core network is a component of a computer network that links networks and provides a conduit for information exchange across multiple LANs or subnetworks. A backbone can connect heterogeneous networks inside the same building, across campus buildings, or over large distances.
A backbone is a high-speed line or collection of lines that forms the quickest (in terms of bandwidth) path across a network. It frequently serves as a met network. The main drawbacks are that they tend to impose time delays when compared to bridging and require more administration than bridges and switches.
To learn more about Network Backbone refer:
https://brainly.com/question/13145758
#SPJ4
Answer
Explanation
A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750' for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.)
No SAS data collection is created because the DATA step halts at the incorrect location.
When SAS encounters a data error in a data step?One of the most often used certifications in the analytics sector is the SAS Base Certification. As one of the most in-demand IT skills, SAS has seen a considerable increase in popularity over the past few years. You should research the following subjects in order to become SAS BASE Certified:Add raw data files. Look at the INPUT, INFILE, and FILE statements.Using PROC IMPORT, import files of raw data.steps for exporting data.Combining and merging SAS datasets Analyze the SET, MERGE, and UPDATE statements.Where and If statements differ from one another.the best ways to add, remove, and rename variablesLearn how to create summary reports using Proc REPORT, Proc PRINT, and Proc FREQ.utilizing ODS commands, produce HTMLPerform loops and arraysProgram Content and Program DatasetFunctionality of Character and DateAcknowledge and fix SAS.To Learn more About SAS data collection refer to:
https://brainly.com/question/29666065
#SPJ4
type of data display tool is plotted chart of data tha shows the progress of a process over time
The line chart type of data display tool is plotted chart of data that shows the progress of a process over time.
What program is used to present data that has been gathered over time?The most straightforward method of visualizing time series data is undoubtedly a line graph. It illustrates the changes using connected points.
Which sort of chart presents the data as a line?Information demonstrating a process's development throughout time. Using several of markers,' or data points, connected by straight line segments, a line chart, line graph, or curve chart displays information. This fundamental style of the chart is utilized widely.
What kind of graph is typically used to show data when time is a variable?The most straightforward approach to display time series data is a line graph. The viewer can quickly understand how something has changed over time thanks to its simplicity and intuitiveness. A line graph employs points connected by lines to depict the changes in an independent and dependent variable. These lines are also known as trend lines.
To know more about graph visit:
https://brainly.com/question/19040584
#SPJ4
TRUE OR FALSE it is important to know if a computer is byte or word addressable because we need to know how many addresses are contained in main memory, cache, and in each block when doing cache mapping.
TRUE Since we need to know how several addresses are included in main memory, cache, and each block when executing cache mapping, it is crucial to understand if a computer is bytes or word addressable.
Cache: What is it?
In a computing setting, a cache is a piece of hardware or program that is used to temporarily store something, typically data. To improve the speed of recently or often accessed data, a small quantity of quicker, more expensive memory is employed. Data that has been cached is transiently kept on a local storage medium that is available to the cache clients and unrelated to the main storage. Its central processing unit (CPU), programmes, web browsers, and operating systems all frequently use cache.
To know more about Cache
https://brainly.com/question/15276918
#SPJ4
Before a newly purchased software package is ready for use, it should undergo integration, system, volume, and user acceptance a. research b. testing C. customization d. implementation
Testing has a well-defined definition, whereas acceptance denotes consent or approval.
What Is User Acceptance Testing?A software product's user might either be the person who purchased the software or the person who asked for it to be made (client).The definition will be as follows if I abide by my rule:Beta testing or end-user testing are other terms for user or client testing of software to assess whether it can be accepted or not. User acceptance testing (UAT) is the process of doing this. The functional, system, and regression testing are followed by this last testing.This testing's primary goal is to confirm that the programme satisfies the necessary business requirements. The end users who are acquainted with the operational needs perform this validation.Various forms of acceptance testing include UAT, alpha, and beta.The user acceptance test is the final testing performed before the program is made available to the public, therefore it goes without saying that this is the final opportunity for the customer to test the software and determine whether it is appropriate for the task at hand.To Learn more About Testing refer to:
https://brainly.com/question/15110538
#SPJ4
Zach believes someone is trying to log in to a computer system in order to gain access to the company's network. He wants to use Windows to determine if that is the case.Where can Zach go to check the security logs?a. Event Viewer
One of your computer's most underused features is definitely Event Viewer, and it surprises me how few even competent experts use this straight forward tool to provide such straightforward answers. Event Viewer is tricky since you have to set it up correctly.
What kind of software does a computer utilize to be controlled?A computer's operating system is a piece of software that manages and organizes the hardware components as well as runs other programs and applications. It is the primary component of the system software, and a computer cannot operate without it.
What three categories of system software exist?Application programs, device drivers, and operating systems are the three main categories of software that make up your system.
To know more about Event Viewer visit :-
https://brainly.com/question/14166392
#SPJ1
while performing disk and file maintenance on the company file server, you determine a user in the accounting department has been accidentally saving documents to all shared folders on the file server. the user's computer was recently passed to her from another user in the company, and according to company policy, the user should have access only to the accounting share.
Note that the incidence that best describes the above situation regarding Disk and file maintenenace is "The principle of least privilege was not followed."
What is the principle of least privilege?The principle of least privilege (PoLP) is a concept in information security that states that a person or entity should only have access to the data, resources, and programs required to execute a task.
The routine modifications, updating, copying, transferring, or deleting of files on a computer is known as disk and file maintenance. File maintenance is often conducted on computers or servers that serve a large number of files.
Files and folders on a computer's hard disk defragment or break down over time and with continuous use. Computer files that have been fractured are chaotic. As a result, the Operating System (OS) operates slowly and identifies processing issues, according to Support.
Learn more about the Principle of least privilege:
https://brainly.com/question/29793574
#SPJ1
Full Question:
While performing disk and file maintenance on the company file server, you determine a user in the accounting department has been accidentally saving documents to all shared folders on the file server. the user's computer was recently passed to her from another user in the company, and according to company policy, the user should have access only to the accounting share.
What best describes this situation?
The project plan which results from defining the system is the input to ________, which is the second phase of the SDLC.
The project plan created by specifying the system serves as the basis for requirements analysis.
Explain about the project plan?Usually between two and five pages long, a project proposal aims to provide answers to the most important concerns about a significant project. A project proposal succinctly outlines the goals of the project, why those goals are significant, and how you plan to get there. It presents a case for your plans in a broader sense.
A project proposal describes the goals and parameters of a project. This is advantageous before to the start of a project since it guarantees that both parties are in agreement over the scope of the project. It communicates to the decision-maker or stakeholder that the service provider is aware of the project's parameters.
To learn more about project plan refer to:
https://brainly.com/question/27599974
#SPJ4
java allows you to create objects of this class in the same way you would create primitive variables. group of answer choices scanner random printwriter string
Java allows you to create objects of string class in the same way you would create primitive variables.
What does Java's String class do?Character strings are represented by the String class. Java applications implement all string literals as objects of this class, including "abc." Strings are immutable; once they are generated, their characteristics cannot be altered. Mutable strings are supported via string buffers. Since string objects cannot be changed, they may be shared.
What purposes serve the string class?Strings are collections of characters that are often used in Java programming. Items in the programming language called Java include strings. The String class is provided by the Java platform for producing and modifying strings.
To know more about Java class visit
brainly.com/question/13949269
#SPJ4
You are creating a spreadsheet for your employer and the header of Spending for Q1 is not showing in column A. What would you do to expand the column to have all characters show?
To display every character Double-click the line dividing columns A and B vertically.
Is Excel the same as a spreadsheet?The spreadsheet application called as Microsoft Excel was developed and is maintained by Microsoft. You can carry out a wide range of tasks with Excel, including doing computations, creating lists, and creating charts.
What is the purpose of a spreadsheet?A spreadsheet is indeed a piece of software that can store, display, and edit data that has been organized into rows and columns. The spreadsheet is one of the most used applications for personal computers. In general, a spreadsheet is made to store numerical data or short text strings.
To know more about spreadsheet visit:
https://brainly.com/question/8284022
#SPJ1
after roughly how many seconds does the amount of information in immediate memory begin to drop off precipitously? type your numeric answer and submit numeric answer - type your numeric answer and submit
After 3 seconds the amount of information in immediate memory begins to drop off precipitously.
What exactly do you mean by instant memory?a sort or stage of memory when a person can recall details that were recently presented, like a street address or phone number, even though those details might be forgotten after being used right away. A common test to determine IQ or neurological damage is the immediate memory test.
What purposes serve IQ tests?A person's short-term and long-term memory is measured as the first step of an IQ test to determine their level of intelligence. It evaluates how quickly people can do these tasks as well as how effectively they can solve puzzles or recall information they have heard.
To know more about IQ visit:
https://brainly.com/question/29035691
#SPJ4
You want to know which files are large files (at least 0.1MB) in your data directory, but you do not want to go through them one by one. So you decide to design a regular expression to help with this. Locate the rule under the p1 target in your Makefile. This rule uses the Is command to list the contents of the data directory in your current folder. The -I option produces the long listing for these contents, which includes their size in bytes. The output of this is command is then piped as input into grep command. The-E option for the grep command allows searching through this text with a regular expression. Replace the regular expression in this grep command to search for any 6 digit number. Since the size of these files are displayed in bytes, the smallest possible six digit number: 100000 corresponds to 0.1MB. When this regular expression is correct, running "make p1" should display the three large files that can be found within the provided data directory. Tip: Start by composing a regex that matches any single digit, and test this to make sure that it works as expected. If you encounter trouble with one specific way of matching single digits, like \d, then please try to find another way that works with grep - E. Once this is working, look for a way to extend this pattern so that it must be repeated exactly six times to be matched.
You must pipe the command's output through grep in order to utilize grep as a filter. " | " is the symbol for pipe.
Explain about the grep?The full line containing the matched string is displayed by default when using grep. To display only the matched pattern, change this setting. Using the -o option, we may instruct grep to show only the matching string. Using grep -n, output should be displayed together with the line number: To display the file's line number where the matching line was found.
Within collections of files, the grep command can look for a string. It outputs the name of the file, a colon, the line that matches the pattern, and the pattern when it discovers a pattern that matches in more than one file.
Instead of putting a filename at the end of a grep command, use an asterisk to search all files in the current directory.
To learn more about string refer to:
https://brainly.com/question/16397908
#SPJ4
44.7.1: unit testing. add two more statements to main() to test inputs 3 and -1. use print statements similar to the existing one (don't use assert).
To add two more statements to main() to test inputs 3 and -1, check the given code.
What is statements?A list of directives for a computer to follow constitutes a computer programme. These instructions for programming are referred to as statements in a programming language.
The parts of programmes called C++ statements govern the order and flow of execution of other programmes. Statements may either be one line of code with a semicolon ; at the end or a block of code enclosed in curly braces.
There are several different types of statement in C++.
Labeled statementsExpression statementsCompound statementsSelection statementsIteration statementsJump statementsTry-Catch blocksDeclaration statements//CPDE//
cout << "3,
expecting 27,
got: " << CubeNum(3) << endl;
cout << "-1,
expecting -1,
got: " << CubeNum(-1) << endl;
Learn more about statements
https://brainly.com/question/14467883
#SPJ4
which of the following components forms the foundation of every computer-based information system and includes resources such as hardware, software, and data center facilities?
Every computer-based information system is built upon components of the technological infrastructure.
What exactly does "technology infrastructure" mean?To support the applications and information management needs of the business, the technological infrastructure consists of hardware and software components. Infrastructure for technology has these parts. devices for computers. computer programs. Networking and communication systems.
Why does technology matter going forward?It can provide a sense of belonging, access, knowledge, and empowerment. As we develop the technologies for the future, we might attempt to create a better world over time. This might mean many things because technology affects every part of our lives.
To know more about technological infrastructure visit:
https://brainly.com/question/13101365
#SPJ4
Determine all cache accesses and the state of the data cache at any given time. From this you can determine any additional cycles from data cache misses. You must calculate the number of bits for the offset, index, and tag, determine the number of hits and misses, show the contents of the cache, and use the number of misses to determine any additional clock cycles required. The total clock cycles would be the total cycles for all iterations from Part 2 plus any additional memory access cycles from cache misses from Part 3.
The smallest and fastest part of a computer system's memory is the cache. The registers, which make up a very minor portion of the computer CPU, are quick storage components.
Why does the cache memory access time take less time than the main memory access time?Cache memory must be substantially smaller than main memory in order to be situated near to the CPU. As a result, it has less room for storage. Due to the increased performance of the more complicated chip, it is also more expensive than main memory.
What distinguishes Level 1 from Level 2 and Level 3 cache benefits?Since it is the smallest and nearest to the CPU, Level 1 (L1) cache memory is the quickest type. On the processor chip, Level 2 (L2) has a larger capacity but a slower speed. The computer that uses the L2 cache has the biggest capacity Level 3 (L3) cache memory.
To know more about Cache memory visit:-
https://brainly.com/question/16091648
#SPJ4
TRUE/FALSE/excel pie charts: excel pie charts: are known by data analysts as the most accurate kinds of charts. can be used to highlight a datapoint (such as a category on the x axis). can be used to display trendlines. are not good for comparing parts of a whole.
It's false. Line charts are known by data analysts as the most accurate kinds of charts. It can be used to highlight a data point (such as a category on the x-axis), can be used to display trend lines, and are not good for comparing parts of a whole.
Characteristic of pie chartsIt is a circular graphic divided into a series of slices that represents a particular category. It is good to show and compare the component parts of a whole. All slices of the pie chart must add up to 100.It is visually simpler than other types of charts.Know more about Excel charts here:
https://brainly.com/question/29756324
#SPJ4
when producing a map in arcgis to emphasize the results of a suitability analysis, the largest element on the page should be: question 25 options: the location map the map legend the map frame containing the symbolized suitability feature class. the north arrow all these elements should be the same size
Making indicators for habitat suitability. The two main methods used to produce HSIs are as follows: Data-driven techniques ecological niche modeling This usually entails a statistical study of information about a species' present distribution. The so-called "environmental envelope" strategy is one of the easiest methods.
How do you determine whether a place is appropriate for GIS?
To identify appropriate locations for a project, use the ArcGIS Spatial Analyst extension. There are two approaches to locate appropriate places. To find places that meet your requirements, one method is to query your data. The second method involves creating a suitability map by merging datasets to determine each location's acceptability in the region.
What does the appropriateness test intend to achieve?
Investing firms conduct a suitability test to assess whether a client's investment goals, financial situation, knowledge, and experience are compatible with a particular portfolio management service or investment counseling service.
To know more about ArcGIS visit;
https://brainly.com/question/13431205
#SPJ4
Consider the following class definition
class rectangleType
{
public:
void setLengthWidth(double x, double y);
//Postcondition: length = x; width = y;
void print() const;
//Output length and width;
double area();
//Calculate and return the area of the rectangle;
double perimeter();
//Calculate and return the parameter;
rectangleType();
//Postcondition: length = 0; width = 0;
rectangleType(double x, double y);
//Postcondition: length = x; width = y;
private:
double length;
double width;
};
and the object declaration
rectangleType bigRect(14,10);
Which of the following statements is correct?
(Points : 4)bigRect.setLengthWidth();
bigRect.setLengthWidth(3.0, 2.0);
bigRect.length = 2.0;
bigRect.length = bigRect.width;
bigRect.setLengthWidth(3.0, 2.0); is the correct declaration of the class variable.
What is a class variable?
Class variables, also known as static variables, are declared using the static keyword within a class but outside of a method, constructor, or block. Regardless of how many objects are created from it, each class variable would only have one copy.
Instance variables are declared within a class but outside of a method. When heap space is allocated to an object, a slot is created for each instance variable value. Instance variables store values that must be referenced by multiple methods, constructors, or blocks, as well as essential parts of an object's state that must be present throughout the class.
Local variables are declared within methods, constructors, or blocks. Local variables are created when the method, constructor, or block is entered, and they are destroyed when the method, constructor, or block is exited.
To know more about Variable, visit: https://brainly.com/question/28463178
#SPJ4
________ hackers are security experts that are paid to hack systems to find security holes for the purpose of preventing future hacking.
O Black-hat
O Gray-hat
O Red-hat
O White-hatAnswer: White-hat
White hat hackers are salaried workers or independent contractors who act as security experts for businesses and use hacking to try and uncover security flaws.
What kind of hackers get into systems for fun or to demonstrate their prowess?Black hat hackers, often known as crackers, are dishonest hackers. Black hats are unethical, occasionally break the law, break into computer systems with malicious intent, and may compromise the privacy, integrity, or accessibility of a company's systems and data.
A Red hat hacker is a who?Targeting Linux systems could be referred to as being a red hat hacker. Red hats, however, have been compared to vigilantes. Red hats aim to disarm black hats much like white hats do, although their strategies diverge greatly from those of the former.
To know more about hackers visit:-
https://brainly.com/question/29215738
#SPJ4
Is it possible in Swift to group case matches together with a common set of statements to be executed when a match for any of the cases is found. For example, is the following allowed?
case 3, 5, 7:
// code for case
A. Yes
B. No
Answer:
A. Yes, it is possible in Swift to group case matches together with a common set of statements to be executed when a match for any of the cases is found.
Explanation:
To group case matches together, you can use a comma-separated list of patterns after the keyword "case", as shown in your example. When a match is found for any of the cases in the list, the code block following the "case" statement will be executed.
Here is an example of how you could use this feature in a switch statement in Swift:
let x = 3
switch x {
case 3, 5, 7:
print("x is 3, 5, or 7")
default:
print("x is not 3, 5, or 7")
}
TRUE OR FALSE an attacker can generally determine in advance exactly where the targeted buffer will be located in the stack frame of the function in which it is defined.
Answer:
False. It is generally not possible for an attacker to determine in advance exactly where the targeted buffer will be located in the stack frame of the function in which it is defined. The location of a buffer in the stack frame can depend on various factors such as the compiler used, the optimization level, the architecture of the machine, and the specific code being executed. As a result, an attacker would typically need to use other techniques, such as heap spraying or return-oriented programming, to control the location of a buffer in memory and potentially exploit a vulnerability.
Explanation:
create a logical model identify entities and attributes input the data into the tables database create a conceptual model implement the database
A logical model includes depictions of entities, properties, relationships, special identifiers, sub types, and super types, as well as restrictions on how relationships can be formed.
What is data model?
A logical model may also reference one or more domain or glossary models or include objects from a domain model. Relational data models, network data models, and hierarchical data models are three examples of this sort of data model. Data are represented as relations, or tables, in the relational model. System for managing orders simply. This is a conceptual data model for a straightforward wholesale retail order management system. Even though some consumers might not have sent any orders yet, customers send orders to the store. Each order item for a product is one of many order items that make up the order.
To learn more about data model from given link
brainly.com/question/10686043
#SPJ4
the confidence that we can have in user authentication depends on the strength of the initial registration process.
The quality of the first registration procedure determines how confident we may be in user authentication.
What is Biometrics?
For each particular website and service, create secure and distinctive passwords or passphrases in accordance with the most recent accessible recommendations. Three categories of authentication factors exist. Password or personal identification number. something you are aware of. A token, like a bank card, is something you possess. Biometrics, like voice and fingerprint recognition, are something you are. Authentication assists users and organisations in defending against malicious parties trying to access systems and steal sensitive data. Computer systems, networks, gadgets, websites, databases, and other software and services are examples of these .
To learn more about distinctive from given link
https://brainly.com/question/13235869
#SPJ4
The ____ command saves your work, turns off the computer fans and hard disk, and then places the computer in a lower-power state. shut down.
The sleep command stores your work, disables the hard drive and computer fans, and then switches the computer to a lower-power mode. closing down.
What is Sleep mode?Electronic devices like computers, televisions, and remote control devices can operate in a low power mode called sleep mode (or suspend to RAM). These modes allow users to resume operations without having to issue new commands or wait for a machine to reboot, and they significantly reduce electrical consumption compared to leaving a device fully on.The computer goes into a lower-power state when the sleep command caches your work, turns off the hard disk and computer fans. Many gadgets use an LED power light that pulses or is red to indicate this power mode.In order to keep the RAM running and be ready to respond to a wake-up event, a computer needs to use some energy even when it is dormant. In several nations, standby power for a sleeping computer is regulated. For instance, the One Watt Initiative in the United States places restrictions on this power.Hence, The sleep command stores your work, disables the hard drive and computer fans, and then switches the computer to a lower-power mode. closing down.
To learn more Sleep mode refer to:
https://brainly.com/question/27583320
#SPJ4
in organisations that generate large number of transactions,.............are often a top priority in database designa. relationships among entitiesb.naming conventionsc.logical design standardsd.high processing speeds
In businesses that produce a lot of transactions, high processing speeds are frequently given top importance in database design.
Can I have ADHD if my processing speed is fast?No matter what researcher A or B chooses to name it—sluggish cognitive tempo, pure inattentive ADHD, whatever—you can still be highly intelligent. High processing speeds are even possible.
What is Processor Speed and Why Is It Important?When comparing computers, one of the most crucial factors to take into account is the processor speed (CPU speed). The CPU is frequently referred to as "the brain" of your computer, thus keeping it in good working order is crucial to the durability and functionality of your machine.
To know more Database design visit :-
https://brainly.com/question/14274993
#SPJ4
Whether you purchase online or by standing in line, the system-level transaction details are essentially the same and they require the same basic database structures and relationships.True
False
The system-level transaction details are essentially the same whether you make a purchase online or in person, and both scenarios call for the same fundamental database structures and relationships. This assertion is accurate.
An online transaction is what?Online transactions are used by consumers to pay for the goods or services they purchase.
What happens in the online transaction first?Registration: Registration for online purchases is the initial step. The customer must register on a website like Flipkart or Amazon in this phase. He must submit his email address, name, address, and other similar facts in order to register; the website keeps and uses these details solely.
To learn more about transaction visit:
brainly.com/question/24730931
#SPJ4
assuming a 1-kb page size, what are the page numbers and offsets for the following address references (provided as decimal numbers)? (a) 21205 (b) 164250 (c) 121357 (d) 16479315 (e) 27253187
Note that the Page numbers and offsets for the following address references given a 1-kb page size are:
a) Address: 21205 → Page number: 20, Offset: 905
b) Address: 164250 → Page number: 161, Offset: 202
c) Address: 121357 → Page number: 119, Offset: 333
d) Address: 16479315 → Page number: 16093, Offset: 659
e) Address: 27253187 → Page number: 26708, Offset: 963.
What is an offset and an address reference?Note that an offset is a numerical value that represents the distance of a particular location within a file, block of memory, or other data structure from a reference point. It is often used to specify the location of a particular piece of data within a larger structure.
An address reference is a value that represents the location of a specific piece of data within a computer's memory.
To determine the page numbers and offsets for the given address references, you will need to divide the address by the page size. The page number will be the result of the division, and the offset will be the remainder.
Thus, for a:
Address: 21205 → Page number: 21205 / 1024 = 20,
Offset: 21205 % 1024 = 905
for b,
Address: 164250 → Page number: 164250 / 1024 = 161, Offset: 164250 % 1024 = 202
for c,
Address: 121357 → Page number: 121357 / 1024 = 119,
Offset: 121357 % 1024 = 333
for d,
Address: 16479315 => Page number: 16479315 / 1024 = 16093,
Offset: 16479315 % 1024 = 659
for e,
Address: 27253187 => Page number: 27253187 / 1024 = 26708,
Offset: 27253187 % 1024 = 963
In conclusion,
a) Address: 21205 → Page number: 20, Offset: 905
b) Address: 164250 → Page number: 161, Offset: 202
c) Address: 121357 → Page number: 119, Offset: 333
d) Address: 16479315 → Page number: 16093, Offset: 659
e) Address: 27253187 → Page number: 26708, Offset: 963.
Learn more about Address References:
https://brainly.com/question/2342795
#SPJ1
one of your customers wants you to build a personal server that he can use in his home. one of his concerns is making sure that he has at least one data backup stored on the server in the event that a disk fails. you have decided to back up his data using raid. since this server is for personal use only, the customer wants to keep costs down. therefore, he would like to keep the number of drives to a minimum. which of the following raid systems would best meet the customer's specifications? RAID 0 RAID 1 RAID 5 RAID 10
The customer's requirements would be best met by raid systems is Raid 1
Explain about the raid systems?In order to protect data in the event of a drive failure, RAID (redundant array of independent discs) stores the same data in various locations on numerous hard discs or solid-state drives (SSDs).
Multiple hard drives are combined in RAID, which stands for Redundant Array of Independent Disks, to increase efficiency. RAID can speed up your computer while also offering you a single drive with a sizable capacity, depending on how it is set up. The reliability of RAIDs can also be improved.
Unlike RAID 0 and RAID 1, RAID 5 requires at least three disc drives to operate, making it one of the most popular RAID configurations.
To learn more about raid systems refer to:
https://brainly.com/question/9305378
#SPJ4
Wayne and Garth are engaged in XP and are writing code while sitting at one terminal. In XP terminology, they are engaged in:
A) Scrumming.
B) Refactoring.
C) Pair programming.
D) Time boxing.
While seated at one terminal, Wayne as well as Garth are playing with XP and creating code. Pair programming is what they are doing, to use XP lingo.
What are examples and code?Code, often known as source code, refers to text that a computer programmer has created in a programming language. Programming languages like C, C#, C++, Python, Perl, as well as PHP are examples. Another less formal term for text produced in markup or style languages, such as HTML and CSS, is code (Cascading Style Sheets).
Why is a code referred to?Informally known as a "code," the word refers to a patient experiencing a cardiopulmonary arrest in a hospital or clinic and necessitating the quick arrival of a team of medical professionals (also known as a "code team") to start resuscitative measures.
To know more about Code visit:
https://brainly.com/question/17493537
#SPJ4
