[tex]here \: is \: your \: answer[/tex]
Solution used to white wash the walls is Quick lime(CaO) and when it is mixed with slaked lime [Ca(OH)2]. When this paste is used for white washing it combines with atmospheric CO2 to form calcium carbonate (CaCO3) which gives it a shiny texture.
Which would increase the reaction rate?
O A. Decreasing the reactant concentrations
B. Removing heat from the system
O C. Adding a catalyst
O D. Lowering the value of k
Answer:
C
Explanation:
C. Adding a catalyst would increase the reaction rate.
What is a catalyst?A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.
A catalyst enhances the probability of successful collisions between reactant molecules, which raises the pace of the reaction by offering an additional avenue for the reaction to occur.
As there would be fewer reactant molecules accessible to react with one another, decreasing reactant concentrations would result in a slower pace of reaction.
Due to the fact that chemical reactions often require energy to take place, eliminating heat from the system would also slow down the reaction rate. A lower value for k would result in a lower rate constant, which would lower the response rate.
Learn more about catalyst at:
https://brainly.com/question/24430084
#SPJ7
What's a third reaction? (Chemistry)
Explanation:
a chemical reaction in which the rate of reaction is proportional to the concentration of each of three reacting molecules
If you started with 2 moles of Nitrogen and 3 moles of Hydrogen, then you
would not have any leftover reactants. Explain which material would be
limiting since no hydrogen or nitrogen were left over?
N2 + 3H2 -> 2NH3
Answer: 0.3 moles NH3
Explanation:
Which statement best describes what happens as thermal energy from the
sun warms the pavement?
A. The thermal energy absorbed by the pavement is destroyed.
B. The thermal energy that is not absorbed by the pavement is
destroyed.
C. Some thermal energy is absorbed by the pavement, and some is
destroyed.
D. The thermal energy of the sun is transferred to the pavement.
Answer:
D
Explanation:
The correct answer would be that the thermal energy of the sun is transferred to the pavement.
Thermal energy refers to the internal energy possessed by a system by virtue of the movement of molecules within such a system. In other words, it is the heat energy possessed by a system.
When the thermal energy from the sun warms the pavement, it means that the thermal energy from the sun has been successfully transferred to the pavement. Thermal energy can be transferred by conduction, convection, or by radiation depending on whether the system is a solid, liquid, gas respectively.
The correct option is, therefore, D.
What name is given to a metal when it forms an ion, and what type of charge does it have?
Answer:
Cation metal. Positive charge.
Answer:
DHS has been working hard for years and it is still unclear whether this would happen if it is to end the market with the engine is a little less than the next 5years to be 8years in the first quarter and the same year in a quarter or less than a quarter or more than that
Pesticides and fertilizers are a major cause of
O air pollution
O acid rain
o the greenhouse effect
O groundwater pollution
Answer:
it means air pollution Environment. The chemicals and nutrients found in fertilizers, while beneficial for agricultural crops, can be lethal in high doses for fish, birds and other wildlife. Pesticides, designed to kill pests chemically, are also dangerous when leached into soil or groundwater supplies.
Isotopes are atoms that have the same mass number, but different numbers.
atomic. True or false
Answer: Im not sure but I think it is false.
Explanation:
How does the chemistry of the ocean change in response to high levels of CO2 in the atmosphere?
PLS HELP!! WILL MARK BRAINLIEST! 99 POINTS!
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
PLS GUYS ITS FOR 10TH GRADE CHEM
Answer:
1. 2.63x10^6
2. 39.2
Both answers have been rounded
how is electrovalent bond formed ? Describe with an example .
Answer:
For example, the bond between the sodium and chlorine atoms in sodium chloride (NaCl) is formed by the transfer of an electron from sodium to chlorine, creating Na + and Cl – ions. ... The electrostatic attraction between these ions provides the bonding in NaCl.
What is the order, plz answer
Answer:
C A B
Explanation:
come on, you also know this from normal water waves.
which ones are stronger (= have more energy) ? the small ones or the big ones ?
and the same applies to all waves. the bigger the waves (higher amplitude), the more energy.
What type of Nuclear decay is shown by the reaction below
Answer:
bete is your answer.
have a great day.
I think c ....is write answers
what's the atomic weight of salt ?
Answer:
58.44 g/mol
Explanation:
58.44 g/mol
WHICH STATEMENT BEST REPRESENTS A HYPOTHESIS
Answer:
D
Explanation:
Hypotheses are educated guesses, and the best answer is the one with an if, as it indicates that it's a guess.
Answer:
letter b should be the answer
A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.
The first shell can only hold 2 electrons, but the pupil placed in 8 electrons.
The second shell can hold up to 8 electrons, but the pupil only placed in 2 electrons.
Flourine only has 9 total electrons, yet there are 10 electrons in the diagram.
Answer:
Explanation:
In the Fluorine atom there are 2 electrons in the innermost shell and 7 i the outer shell.
Assertion (A): An orbital cannot have more than two electrons, moreover, if an orbital has two electrons they must have opposite spins.
Reason (R): No two electrons in an atom can have the same set of all the four quantum
numbers.
a) Both A and R are true and R is the correct explanation of A.
b) Both A and R are true but R is not the correct explanation of A.
c) A is true but R is false.
d) Both A and R are false.
pls answer
Answer:
the correct answer is option ( A )
Both A and R are true and R is the correct explanation of A.
Explanation:
hope it helps you
Mark my answer as brainlist
have a nice day
The process of diffusion can be described as: Movement of water from the area of high concentration of solute to the area of low concentration of solute. Movement of solute from the area of low concentration of solute to the area of high concentration of solute. Movement of water from the area of low concentration of solute to the area of high concentration of solute. Movement of solute from the area of high concentration of solute to the area of low concentration of solute.
Answer:
Movement of water from the area of high concentration of solute to the area of low concentration of solute.
Explanation:
Diffusion can be defined as the movement of gas molecules from a region of high concentration to a region of lower concentration until an equilibrium is attained or reached. This mixing of gas molecules in the liquid or gaseous state is due to their kinetic energy of random motion i.e without requiring bulk motion.
This ultimately implies that, diffusion is a phenomenon through which gas molecules in either a gaseous or liquid state spread out in response to a concentration gradient, which is simply the difference in concentration of the gases across a space.
During diffusion, molecules move from areas of high concentration to areas of low concentration. Also, diffusion does not require energy to move molecules.
Hence, the process of diffusion can be described as movement of water from the area of high concentration of solute to the area of low concentration of solute.
A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.
One the first chemistry test. 12 students got As, 18 students got Bs, and 20 students got Cs.
a. What is the percentage of students received Bs.
b. What is the percentage of students who received Cs?
Express your answer to the ones place.
Answer:
A. 36 percent recieved Bs
B. 40 percent of students received Cs
Explanation:
Amount of students: 12+18+20=50
Students with Bs: (18÷50) x 100 = 36%
Students with C's: (20÷50) x100 = 40%
On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40
What is the percentage of students received B and C?In mathematics, a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign %. A percentage is a dimension less unit and it has no unit.
In above question 12 student got A, 18 student got B, and 20 student got C.
So total number of student = 12 + 18 + 20 = 50.
Then the percentage of students received B is as follows:-
Percentage of students who got B = (student who got B/Total number of student) X 100.
=(18/50) X 100
= 36%
Now percentage of students who got C = (No of students who got C/Total students)X100
=(20/50) X 100
=40%.
Therefore,On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40 percentage of students who got B is 36% and percentage of students who got C is 40%
Learn more about percentage here:
https://brainly.com/question/28269290
#SPJ2
(answered on edge)
Calculate the percent by mass of each element.
%N = 35 %
%H = 5.0 %
%O = 60 %
Answer:
N=35%. so 35/100*7 =2.45%
H=5.0 so 5/100*1=0.05%
o=60% so 60/100*8=4.8%
Why does the battery give a reading of 9V even though there are no electrons flowing around the circuit?
Answer:
because battery have it's own voltage in it's composition
The compound KOH is ________. insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
Answer:
soluble because all compounds containing K are soluble
Explanation:
Most metal hydroxides are insoluble. However, alkali metal hydroxides (such as KOH and NaOH) are very soluble.
In the case of KOH, the K cation is attracted to the electronegative oxygen on water. The OH anion is capable of hydrogen bonding to the water. (Notice how OH⁻ is simply the deprotonated form of water.)
The compound KOH is soluble insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
What are alkalis?Alkalis are bases which are soluble in water. The basic alkalis are as follows:
KOHNaOHCa(OH)2Mg(OH)2 is insoluble in water.
In conclusion, KOH is a soluble base
Learn more about alkalis:
https://brainly.com/question/25317545
A reaction happens quickest during:
A. The beginning of the reaction
B. It is constant throughout the reaction
C. The end of the reaction
D. The middle of the reaction
The reaction is the formation of the product from the reactants. A reaction happens quickest during the beginning of the reaction. Thus, option A is correct.
What are the factors affecting the reaction rate?The reaction rate is the pace at which the reaction takes place and the breakdown or the combination of the reactants to produce the products. The rate of reaction depends on the concentration of the reactants.
The concentration of the reactants is in direct proportion with the rate as at the beginning of a reaction there is a higher amount of substance present than at the end.
As the reaction proceeds, the reactants get consumed and their concentration decreases. As there is a decrease in concentration the rate of the reaction converting and producing the products also decreases.
Therefore, option. the rate of reaction is fast at the beginning.
Learn more about reaction rate here:
https://brainly.com/question/16726097
#SPJ5
Matty told Harriet that, later that same day, he was going to try to convince her to change her attitude toward the nutritional merits of doughnuts. Based on research findings regarding persuasion, how effective is Matty's strategy?
Answer:
The correct answer is - not very effective; forewarning tends to reduce the effectiveness of an attitude change
Explanation:
The strategy of forewarning or warning before attempting any change in the psychology of an individual is found to be less effective. The subject sees a forewarning seen as a warning that a person is going to attempt to make changes in the attitude of a person about a particular thing or situation.
As a result, the person is ready to defenses up with regard to that idea of persuasion which Builds up defenses for the situation. Therefore, the effect of persuasion is reduced on the person.
Thus, Matty's strategy is not very effective; forewarning tends to reduce the effectiveness of an attitude change
What is the chemical formula for carbon tetrafluoride?
The Periodic Table
1
mono-
2
di-
3
4
tetra-
5
penta-
hexa-
6
7
hepta-
8
Oct-
9
nano-
10
deca-
Please help :)
A chocolate chip cookie recipe calls for 0.050 moles of baking soda (NaHCO3). How many grams should the chef mass out?
According to the mole concept, 4.2 g of baking soda should be weighed out.
What is mole concept?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Baking soda has molar mass of 84 g /mole, thus mass is calculated using number of moles formula which is mass= molar mass×number of moles, which is mass=84×0.050=4.2 g.
Thus,4.2 g of baking soda should be weighed out by chef.
Learn more about mole concept,here:
https://brainly.com/question/12805690
#SPJ2
En una carrera de atletismo un deportista se muestra agotado sin fuerzas para continuar y decide abandonar la carrera ¿Que alimentos tomo antes de la carrera ?
Answer:
Los alimentos para evitar la fatiga durante una carrera son alimentos bajos en grasas y altos en carbohidratos, así como alimentos bajos en fibra como pan, mantequilla de maní, plátano, jugo de frutas sin pulpa, y beber hasta aproximadamente 600 ml de líquido aproximadamente 3 horas. antes de la carrera
La comida para comer unos días antes de la carrera incluye carnes magras, arroz, pasta y verduras con contenido de almidón.
Los alimentos que se deben evitar incluyen carne roja, alimentos con alto contenido de grasas saturadas, alimentos fritos, pasteles y salchichas.
Explanation:
with balanced chemical equations, show the different stages of fermentation
Answer:
formula for fermentation is: C6H12O6 → 2 C2H5OH + 2 CO.
what is mean by vector
Answer:
A quantity having direction as well as magnitude is called vector.
what are the defects of mendeleev's periodic table
Answer:
1 Anomalous Pairs. The rest of the pairs of elements don't follow the follow Mendeleev's Principles . they are :
2Grouping of chemically dissimilar elements.
3Position of Isotopes.
4Electronic arrangement.
5Separation of chemically similar elements.
6The position of hydrogen.
