Why is observational evidence important in an experiment?

Answer:

d. 9.95 × 10⁻³ mol

e. 249 g

f. 2.55 × 10²⁴ atoms

g. 4.32 × 10²² atoms

Explanation:

d. the number of moles of cobalt represented by 5.99 x 10²¹ cobalt atoms

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

5.99 x 10²¹ atoms × 1 mol/6.02 × 10²³ atoms = 9.95 × 10⁻³ mol

e. the mass of 4.23 mol of cobalt

The molar mass of cobalt is 58.93 g/mol.

4.23 mol × 58.93 g/mol = 249 g

f. the number of cobalt atoms in 4.23 mol of cobalt

We will use Avogadro's number: there are 6.02 × 10²³ atoms of cobalt in 1 mole of atoms of cobalt.

4.23 mol × 6.02 × 10²³ atoms/1 mol = 2.55 × 10²⁴ atoms

g. the number of cobalt atoms in 4.23 g of cobalt

First, we will calculate the moles of cobalt using the molar mass of cobalt.

4.23 g × 1 mol/58.93 g = 0.0718 mol

Then, we will calculate the number of cobalt atoms using Avogadro's number.

0.0718 mol × 6.02 × 10²³ atoms/1 mol = 4.32 × 10²² atoms

The ocean is not a part of Earth's layers.

Answer:

Ocean

Explanation:

Answer:

Lead

Explanation:

The subatomic particles within an atom can be used to know the atom or element given.

Of particular interest is the number of protons within the atom.

The periodic table is based on the atomic number of atoms. This atomic number is the number of protons within an atomic space.

So; If we know the number of protons within an atom, we can know the element.

The number of protons given is 82, the element is  therefore lead.

Answer:

The atomic number of polonium is 84. The atomic number lead is 82.

Explanation:

Answer:

Molecules/State

Explanation:

We know from the kinetic molecular theory that matter is made up of molecules. These molecules are in constant motion at various velocities and energies.

The total thermal energy refers to the total kinetic energies of these particles. It depends on the temperature of the system, the energies of the molecules present in the material and the arrangement of the object's molecules (states of matter).

Answer:

5.78 × 10¹⁴ Hz

Explanation:

Step 1: Given and required data

Step 2: Convert "λ" to meters

We will use the conversion factor 1 m = 10⁹ nm.

519. nm × 1 m/10⁹ nm = 5.19 × 10⁻⁷ m

Step 3: Calculate the frecquency of this light

We will use the following expression.

c = λ × ν

ν = c/λ

ν = (3.00 × 10⁸ m/s)/5.19 × 10⁻⁷ m

ν = 5.78 × 10¹⁴ s⁻¹ = 5.78 × 10¹⁴ Hz

The percent composition of the compound.

A O-18.18%, N-21.21%, H-60.60%

Given

6.00 grams of oxygen,

7.00 grams of nitrogen,

20.00 grams of hydrogen.

Required

The percent composition

Solution

Total mass :

= mass of O + mass of N + mass of H

= 6 + 7 + 20

= 33 g

% O = 6/33 x 100%= 18.18%

% N = 7/33 x 100%=21.21%

% H = 20/33 x 100% = 60.6 %

Answer:

c

Explanation:

ok than not c than b maybe

Answer:

[tex]10\, {\rm Fe}\rm SO_4 + 2\, \rm K {Mn} O_4 + 8\, H_2SO_4\\ \to 5\, {Fe} (SO_4)_3 + K_2SO_4 + 2\, {Mn}SO_4 + 8\, H_2O[/tex].

Explanation:

Identify the elements with oxidation state changes:

Oxidation states of iron, [tex]\rm Fe[/tex]:

Oxidation state of manganese, [tex]\rm Mn[/tex]:

The change in the oxidation state of [tex]\rm Mn[/tex] is five times the opposite of the change to the oxidation state of [tex]\rm Fe[/tex]. If there are one mole of [tex]\rm Mn\![/tex] atoms in each mole of this reaction, there would be five times as many [tex]\rm Fe\![/tex] atoms per mole reaction. In other words:

[tex]\displaystyle 5\, \overset{+2}{\rm Fe}\rm SO_4 + 1\, \rm K \overset{+7}{Mn} O_4 + ?\, H_2SO_4\\ \to \frac{5}{2}\, \overset{+3}{Fe} (SO_4)_3 + ?\, K_2SO_4 + 1\, \overset{+2}{Mn}SO_4 + ?\, H_2O[/tex].

(Notice that each mole of this reaction would include five times as many [tex]\rm Fe[/tex] atoms as [tex]\rm Mn[/tex] atoms.)

Multiply the coefficients by [tex]2[/tex] to eliminate the fraction:

[tex]\displaystyle 10\, {\rm Fe}\rm SO_4 + 2\, \rm K {Mn} O_4 + ?\, H_2SO_4\\ \to 5\, {Fe} (SO_4)_3 + ?\, K_2SO_4 + 2\, {Mn}SO_4 + ?\, H_2O[/tex].

Find the unknown coefficients using the conservation of atoms.

Reactants:

Therefore, among the products:

[tex]\displaystyle 10\, {\rm Fe}\rm SO_4 + 2\, \rm K {Mn} O_4 + ?\, H_2SO_4\\ \to 5\, {Fe} (SO_4)_3 + {1}\, K_2SO_4 + 2\, {Mn}SO_4 + ?\, H_2O[/tex].

Products:

Reactants:

[tex]\displaystyle 10\, {\rm Fe}\rm SO_4 + 2\, \rm K {Mn} O_4 + 8\, H_2SO_4\\ \to 5\, {Fe} (SO_4)_3 + {1}\, K_2SO_4 + 2\, {Mn}SO_4 + ?\, H_2O[/tex].

Products:

Therefore, among the products:

[tex]\displaystyle 10\, {\rm Fe}\rm SO_4 + 2\, \rm K {Mn} O_4 + 8\, H_2SO_4\\ \to 5\, {Fe} (SO_4)_3 + {1}\, K_2SO_4 + 2\, {Mn}SO_4 + 8\, H_2O[/tex].

Answer:

60.0mL of the diluted solution are needed

6.00mL of the 1.00M NaOH stock solution is the minimum volume needed to prepare the diluted solution.

Explanation:

As in each titration we need to use 20.0mL of the diluted 0.100M solution. As there are 3 titration, the volume must be:

3 * 20.0mL = 60.0mL of the diluted solution are needed

Now, to prepare a 0.100M NaOH solution from a 1.00M NaOH stock solution the dilution must be of:

1.00M / 0.100M = 10 times must be diluted the solution.

As we need at least 60.0mL, the minimum volume of the stock solution must be:

60.0mL / 10 times =

Answer:

2.9moles of hydrogen gas

Explanation:

convert liters to dm³

since 1liter= 1dm³

thus, 65.0liters = 65.0dm³

number of moles = volume given/22.4dm³

= 65.0/22.4

=2.9moles

Answer:

movement of charged particles through the wire .

Explanation:

When electricity is passed through the wire of electromagnet , moving electrons of the wire produces magnetic field . This magnetic field in increased due to high permeability of soft iron of the electromagnet . It is this magnetic field which creates magnetic force .

Answer:

0.57 water

Explanation:

To solve this problem, we need to write the reaction expression first.

The reactants are oxygen gas and hydrogen gas.

They react to give a product of water

       2H₂    +    O₂   →   2 H₂O  

Given that;

Number of moles of hydrogen gas = 0.57moles

From the balanced reaction expression;

       2 moles of hydrogen gas produces 2 moles of water

   So;

    0.57mole of hydrogen gas will also produce 0.57 water

Answer:

hello your question is incomplete attached below is the complete question

answer :

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

Explanation:

Reason for the mechanism

we use Isomerization because conjugated allylic carbocation  is more stable when compared to a Non-conjugated Allylic carbocation

attached below is the detailed mechanism

Answer:

The answer is "A"

Explanation:

Please find the complete question in the attachment file.

[tex]\to R(s)= \frac{As}{K+s}[/tex]

when the s in the approach, that is infinity R(s) tends

[tex]\to \frac{A}{\frac{K}{s}+1} \\\\ \to\frac{A}{0+1} \\\\ \to\frac{A}{1} \\\\ \to A[/tex]

Answer: product

Explanation:

Each substance written to the right of the arrow in a chemical equation is referred to as a product.

When writing a chemical equation, the substance that's written to the left of arrow in the equation is the reactants.

On the other hand which is the right side is the product.

Answer:

th relative ability of a solute to devolve into a solvent

Answer:

[tex]\%N=26.2\%\\\\\%H=7.5\%\\\\\%Cl=66.3\%[/tex]

Explanation:

Hello!

In this case, since the calculation of the percent composition of an element in a chemical compound is computing considering its atomic mass, subscript in the formula and molecular mass of the compound it is; for nitrogen, hydrogen and chlorine we have that ammonium chloride has a molar mass of 53.49 g/mol so the percent compositions are:

[tex]\%N=\frac{14.01*1}{53.49}*100\% =26.2\%\\\\\%H=\frac{1.01*4}{53.49}*100\% =7.5\%\\\\\%Cl=\frac{35.45*1}{53.49}*100\% =66.3\%[/tex]

Best regards!

Answer:

H-H equation is written as follows:

pH=pK + log

{HCO3-}(base)

{H2CO3}(acid)

Answer:

0.229 cm³.

Explanation:

The following data were obtained from the question:

Volume (in in³) = 0.014 in³

Volume (in cm³) =?

1 in = 2.54 cm

Next, we shall determine a conversion scale to convert from in³ to cm³. This can be obtained as follow:

1 in = 2.54 cm

Therefore,

1 in³ = 2.54³ cm³

1 in³ = 16.387 cm³

Finally, we shall convert 0.014 in³ to cm³. This can be obtained as follow:

1 in³ = 16.387 cm³

Therefore,

0.014 in³ = 0.014 in³ × 16.387 cm³ / 1 in³

0.014 in³ = 0.229 cm³

Thus, 0.014 in³ is equivalent to 0.229 cm³.

Answer:

Explanation:

From the information given;

Consider using Lande's Interval rule which can be expressed as:

[tex]\Delta E = E_{j+1} - E_jj \ = \alpha (j+1)[/tex]

here;

[tex]j+1[/tex]  = highest level of j

and

[tex]\dfrac{\Delta E_1}{\Delta E_2} = \dfrac{(j+2)}{(j+1)}[/tex]

[tex]\dfrac{5}{3} = \dfrac{(j+2)}{(j+1)}[/tex]

[tex]5(j+1) = 3(j+2)[/tex]

[tex]5j+5 = 3j+6[/tex]

[tex]2j = 1\\ \\ j = \dfrac{1}{2}[/tex]

recall that:

[tex]j = |S-L| \ \to \ |S+L |[/tex]

So;

[tex]S-L = \dfrac{1}{2} --- (1)[/tex]; &

[tex]S+L = \dfrac{5}{2} --- (1)[/tex]

Using the elimination method, we have:

[tex]2S = \dfrac{6}{2}[/tex]

[tex]S = \dfrac{3}{2}[/tex]

Since [tex]S = \dfrac{3}{2}[/tex]; then from (1)

[tex]\dfrac{3}{2} -L = \dfrac{1}{2}[/tex]

[tex]L = \dfrac{2}{2}[/tex]

[tex]L = 1[/tex]

Answer: 7.77 g/ml

Explanation:

Volume of cylinder with only water = 3.28 mL

Volume of cylinder with water and metal = 8.72 mL

Volume of metal = (Volume of cylinder with water and metal ) -(Volume of cylinder with only water)

=8.72-3.28

=5.44 ml

Mass of metal = 42.26 g

Formula of Density =  [tex]\dfrac{\text{Mass}}{\text{Volume}}[/tex]

i.e. the density of the metal = [tex]\dfrac{42.26}{5.44}\approx7.77\text{ g/ml}[/tex]

Hence, the density of metal = 7.77 g/ml

Answer:

0.696 atoms of oxygen

Explanation:

We'll begin by calculating the number of mole in 50 g of scheelite CaWO₄. This can be obtained as follow:

Mass of CaWO₄ = 50 g

Molar mass of CaWO₄ = 40 + 184 + (4×16)

= 40 + 184 + 64

= 288 g/mol

Mole of CaWO₄ =?

Mole = mass / Molar mass

Mole of CaWO₄ = 50 / 288

Mole of CaWO₄ = 0.174 mole

Finally, we shall determine the number of oxygen atom in 50 g (i.e 0.174 mole) of CaWO₄. This can be obtained as follow:

1 mole of CaWO₄ contains 4 atoms of oxygen.

Therefore, 0.174 mole of CaWO₄ will contain = 0.696 atoms of oxygen.

Thus, 50 g (i.e 0.174 mole) of CaWO₄ contains 0.696 atoms of oxygen.

Answer:

A. This allows the plants to conserve water and not bloom during the heat of the day

Explanation:

Most desert plants only bloom at night because they take advantage of animals like moths and insects that fly at night for pollination and reproduction.

Because these plants are in the desert and do not get enough water except from short occasional rainfalls, they conserve water and not bloom during the heat of the day. They bloom at night when the temperature is low and this enhances their water conservation and survival.

Answer:

The cycling of matter is important to many Earth processes and to the survival of organisms the existing matter must cycle continuously for this planet to support life Water, carbon, nitrogen, phosphorus, and even rocks move through cycles If these materials did not cycle, Earth could not support life.

Explanation:

Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

Rocks, as well as water, carbon, nitrogen, and phosphorus, go through cycles. The planet Earth could not support life if these materials did not cycle.

Subsystems exist within the Earth system. These subsystems include the exosphere, atmosphere, hydrosphere, lithosphere and geosphere, also referred to as the lithosphere, and the living environment (biosphere).

These systems are powered by energy that comes from both the Sun and the interior of the Earth. Through processes known as biogeochemical cycles, nutrients and elements also move through these systems along with energy.

Therefore,  Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

To learn more about Earth, refer to the link:

https://brainly.com/question/1204146

#SPJ6

Answer:

Solution A: 0.00400M

Solution B: 0.00400M

Solution C: 4.00x10⁻⁵M

Explanation:

Solution A is diluting the 0.100M NaCl from 10mL to 250mL. That is:

250mL / 10mL = 25 times.

That means molar concentration of sln A is:

0.100M / 25 = 0.00400M

Solution B is obtained diluting 25mL to 100mL:

100mL / 25mL = 4 times

0.00400M / 4 times = 0.00100M

And solution C is obtained diluting the solution C from 20mL to 500mL:

500mL / 20mL = 25 times

Solution C:

0.00100M / 25 times = 4.00x10⁻⁵M

The formula for serial dilution can be used to obtain the molarity of solution A, B , C.

M1V1 = M2V2

M2 = 0.100 M ×  10 mL/250-mL

M2 = 0.004 M

M1V1 = M2V2

M2 = 0.004 M × 25 mL/100-mL

M2 = 0.001 M

M1V1 = M2V2

M2 = 0.001 M × 20 mL/500-mL

M2 = 0.00004 M

Learn more about serial dilution: https://brainly.com/question/2167827

Answer:

[N₂] = 1.1M

Explanation:

Based on the chemical reaction:

N₂(g) + O₂(g) ⇄ 2 NO(g)

Equilibrium constant, K, is defined as:

K = 5.93 = [NO]² / [N₂] [O₂]

Where [] are equilibrium concentrations of each specie

As initial concentrations are:

N₂ = 0.40mol / 0.500L = 0.8M

NO = 1mol / 0.500L = 2M

The equilbrium concentrations are:

[NO] = 2M - 2X

[N₂] = 0.8M +X

[O₂] = X

Replacing:

5.93 = [2 - 2X]² / [0.8+X] [X]

5.93 = 4 - 8X + 4X² / 0.8X + X²

4.744X + 5.93X² = 4 - 8X + 4X²

1.93X² + 12.744X - 4 = 0

Solving for X:

X = -6.9M → False solution. There are no negative concentrations

X = 0.3M. Real solution.

[N₂] in equilibrium is:

[N₂] = 0.8M +0.3M

[N₂] = 1.1M

Answer:

% Free space in water = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%

% Free space in ice  = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%

Explanation:

As given ,

Density for ice at 0⁰C = 0.917 g/ml

Density for water at 0⁰C = 0.999 g/ml

Radii of H atoms = 37 pm

Radii of O atoms = 66 pm

Now,

Consider 1 ml of water = 1 cm²

As , we know that mass of water in 1 cm² = 0.999 g

Moles of water = [tex]\frac{0.999}{18} = 0.056[/tex]

Volume of H₂O = 1.624×[tex]10^{-31}[/tex] m²

Now,

Volume occupied by water = 0.056×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²

                                              = 5.48×[tex]10^{-9}[/tex] m²

⇒Volume occupied by water = 5.48×[tex]10^{-9}[/tex] m²

Now,

Free space = 1×[tex]10^{-6}[/tex]  - 5.48×[tex]10^{-9}[/tex] = 9.95×[tex]10^{-7}[/tex] m²

% Free space = [tex]\frac{9.945* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.45%

Now,

Consider 1 ml of ice  = 1 cm²

S.I unit of ice = 1×[tex]10^{-6}[/tex] m²

As , we know that mass of water in 1×[tex]10^{-6}[/tex] m² = 0.917 g

Moles of ice = [tex]\frac{0.917}{18} = 0.012[/tex]

Volume of H₂O = 6.022×[tex]10^{23}[/tex] ×0.012

Volume of ice unit = [tex]\frac{4}{3} \pi (37*10^{-12})^{3} *2 + \frac{4}{3} \pi (66*10^{-12})^{3} = 1.624*10^{-31}m^{3}[/tex]

Now,

Volume occupied by water = 0.012×6.022×[tex]10^{23}[/tex]× 1.624×[tex]10^{-31}[/tex] m²

                                              = 1.17×[tex]10^{-9}[/tex] m²

⇒Volume occupied by water = 1.17×[tex]10^{-9}[/tex] m²

Now,

Free space = 1×[tex]10^{-6}[/tex]  - 1.17×[tex]10^{-9}[/tex] = 9.98×[tex]10^{-7}[/tex] m²

% Free space = [tex]\frac{9.98* 10^{-7} }{1*10^{-6} }[/tex]×100 = 99.8%

Answer:

1.2 cm

Explanation:

The reason how I got my answer is by dividing 150 by 125 and that gave me 1.2 cm.