Why does the output of a microphone increase as the frequency of the sound waves which it receives increases

Answers

Answer 1

Answer:

See Explanation

Explanation:

The frequency of sound waves received by the microphone influences the output or pitch of the sound obtained from the microphone.

The higher the frequency of the sound received by the microphone, the higher the output of the microphone and vice versa. This is because, the higher the frequency of sound, the higher the oscillations produced and the greater the output of the microphone.

The rise and fall in the pitch of sound waves as the frequency of sound waves varies is called inflection.

Answer 2

Answer:

b

Explanation:

cuz im smart


Related Questions

as light passes from water into air it has a refracted angle of 35 degrees. calculate the incident angle of the light.

Answers

I think it’s 44 but I’m not sure

Cuatro contenedores idénticos tienen la misma cantidad de gas helio a la misma temperatura inicial. Los recipientes también cuentan con un émbolo móvil que no permite que el helio escape. Cada muestra de gas sigue un proceso distinto como se describe a continuación: Muestra 1: 500 J de calor salen del gas y este realiza 300 J de trabajo. Muestra 2: 500 J de calor entran al gas y este realiza 300 J de trabajo. Muestra 3: 500 J de calor salen del gas y se hace un trabajo de 300 J sobre él. Muestra 4: 500 J de calor entran al gas y se hace un trabajo de 300 J sobre él.

Answers

Answer:

1)  ΔE = -800 J, 2) ΔE = 200 J, 3)  ΔE = -200 J, 4) ΔE = 800 J

Explanation:

For this exercise let's use the first law of thermodynamics

             

          ΔE = Q + W

Where we will apply this expression to several cases

1) output Q = 500 J and does work of W = 300 J.

The two processes involve an energy output

         ΔE = - 500 - 300

         ΔE = -800 J

Therefore, the internal energy of the gas decreases by this amount,

2) enter Q = 500J and do work of W = 300 J

         Positive heat is added and does negative work

         ΔE = 500 - 300

         ΔE = 200 J

3) they leave Q = 500 J and do (work on the gas) W = 300J

negative heat and positive work come out

          ΔE = -500 + 300

          ΔE = -200 J

4) heat enters Q = 500 J, work on gas W = 300 J

both positive

         ΔE = 500 + 300

         ΔE = 800 J


If you want to decrease the current created by a generator what can you do?

Answers

Answer:

To decrease the current;

1) Use fewer loops or number of turns

2) Use a lower speed of rotation of the coil in the magnetic field

3) Use a weaker magnetic

Explanation:

According to Faraday's Law of induction, which is the basis of the electromagnetism, electromagnetic induction and therefore the basis of the  electric generator, can be written as follows;

[tex]\epsilon = -N \cdot \dfrac{\Delta \phi}{\Delta t}[/tex]

Where;

ε = The induced voltage

N = The number of turns (loops)

ΔФ = The change in the magnetic flux

Δt = The change in the time (the duration)

Given that voltage is directly related to the current, decreasing the voltage, decreases the current

To decrease the voltage, and therefore, the current we can;

1) Reduce the number of loops in the coil

2) Increase the time change per unit change in flux by slowing down the speed of rotation of the generator

3) Decrease the amount of change in the magnetic field per turn, by using a weaker magnetic

Mrs. Botts applies brakes on a car help it to decelerate at the rate of -0.80m/s2. What distance is required to stop the car when it is moving 17 m/s.

Answers

Answer:

Explanation:

vf=0

vi = 17

a = -0.8

Δx = ?

vf^2 = vi^2 + 2 a Δx

Δx = (vf^2 - vi^2) / 2a

Δx = (0-17^2) / 2 (-0.8)

Δx = 180.625 m

Croquet balls must have a mass of 0.50 kg. A red croquet ball is moving at 5 m/s. It strikes an at-rest green croquet ball head-on and then continues to move in the same direction, but with a speed of 2 m/s. What is the final speed of the green ball?

A.
5 m/s

B.
0.5 m/s

C.
2 m/s

D.
3 m/s

Answers

Answer:

Explanation:

The Law of Momentum Conservation for us has the equation

[tex][m_rv_r+m_gv_g]_b=[m_rv_r+m_gv_g]_a[/tex] and filling in:

[tex][(.50)(5.0)+(.50)(0)]=[(.50)(2.0)+(.50)v_g][/tex] and

2.5 = 1.0 + .50v and

1.5 = .50v so

v = 3 m/s

The final speed of the green ball is 3m/s. This can be calculated by the law of conservation of momentum. Thus, the correct option is D.

What is the law of Conservation of Momentum?

The principle of the law of conservation of momentum states that if any two objects undergo collision, then the total momentum of the objects before and after the collision will be the same if there is no external force acting on the colliding objects.

The Law of Conservation of Momentum has the equation which is:

m₁ × u₁ + m₂ × u₂ = m₁ × v₁ + m₂ × v₂

where, m₁ = mass of object 1,

u₁ = initial velocity of object 1 before collision,

m₂ = mass of object 2,

v₁ = final velocity of object 1 after collision,

v₂ = final velocity of the object 2 after collision.

0.50 × 5 + 0.50 × 0 = 0.50 × 2 + 0.50 × v₂

2.5 + 0 = 1.0 + 0.50 × v₂

2.5 - 1.0 = 0.50 × v₂

1.5 = 0.50 × v₂

1.5/ 0.5 = v₂

v₂ = 3m/s

Therefore, the correct option is D.

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ2

A steel railroad track has a length of 79 when the temperature is 2◦C. What is the increase in the length of the rail on a hot day when the temperature is 35◦C? The linear expansion coefficient of steel is 11 × 10−6 (◦C)−1.

Answers

Answer:

We know that the length is 79 (there are no units of length in the question, so i will leave it as it is written, without units) when the temperature is 2°C.

We want to find the increase in length when the temperature is 35°C, knowing that the linear expansion coefficient is 11*10^(-6) °C^-1

The change in length is just given by the equation:

[tex]\Delta L = \alpha*L_0* (T_1 - T_0)[/tex]

where:

α = 11*10^(-6) °C^-1

T₀ is the initial temperature, so T₀ = 2°C

T₁ is the final temperature, so T₁ = 35°C

L₀ is the initial length, so L₀ = 79

Replacing these in the equation we get:

ΔL = ( 11*10^(-6) °C^-1)*79*(35°C - 2°C)

     = 0.28677

So the length of the railroad will increase by 0.28677  

hey everyone


what is optics??​

Answers

Explanation:

Optics is a branch of physics that is the study of light and vision. ... The branch of physics dealing with the nature and properties of electromagnetic energy in the light spectrum and the phenomena of vision. In the broadest sense, optics deals with infrared light, visible light, and ultraviolet light.

Courtney wants to practice doing science. Which example best illustrates her
using inquiry?
A. Courtney decides to drop several different objects off her
apartment's porch to see which falls the fastest.
B. Courtney pays close attention in her physical science class to see
if her teacher explains the speed of falling objects.
C. Courtney reads about the history of the study of gravity and learns
about why scientists first studied falling objects.
D. Courtney finds a calculation that explains the speed of falling
objects. She tries to understand the calculation by writing it down.

Answers

Answer:

A

Explanation:

because she wants to practice science and A is the practical option.

What is a sound wave?

Answers

A sound wave is the pattern of disturbance caused by the movement of energy traveling through a medium (such as air, water, or any other liquid or solid matter) as it propagates away from the source of the sound. The source is some object that causes a vibration, such as a ringing telephone, or a person's vocal chords.

A first aid provider is trained to do the following except:
A) diagnose the victims condition
B) recognize, asses and prioritize the need for first aid
C) seek professional medical assistance when necessary
D) provide appropriate first aid care

Answers

A.
They’re supposed to help the person and cannot diagnose them as that is the job of a doctor

Which statement describes the possible interaction(s) between two objects
caused by the electric, magnetic, or gravitational force between them?
O A. Electric and gravitational forces only cause objects to repel each
other, and magnetic forces only cause objects to be attracted to
each other.
O B. All three types of forces only cause the objects to repel each other.
O C. Gravitational forces only cause objects to be attracted to each
other, and magnetic and electric forces can cause objects to
attract or repel each other.
O D. All three types of forces only cause the objects to be attrachyd to
each other.

Answers

The statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:

Gravitational forces only cause objects to be attracted to each other, and magnetic and electric forces can cause objects to

What is force?

Force can be defined as the push or pull on an object with mass that causes it to change its velocity

So therefore, the statement which describes the possible interaction(s) between two objects caused by the electric, magnetic, or gravitational force between them is:

Gravitational forces only cause objects to be attracted to each

other, and magnetic and electric forces can cause objects to

Learn more force:

https://brainly.com/question/14839816

#SPJ1

According to Archimedes' principle, when will an object float in water?
A. When its volume is less than the volume of water it displaces
B. When its weight is equal to the buoyant force exerted by the water
C. When its density is greater than the density of water
D. When its weight is greater than the weight of water it displaces

Answers

C. When it’s density is greater than the density of water.

Answer:

Its B

Explanation:

a p e x

If the distance between the source of sound and observer is reduced to one half, then
the intensity of sound will become

Answers

Answer:

Let the power delivered by the sound wave be 'P'

Intensity by definition is the power delivered per unit area.

i.e. I =

dA

dP

;

In spherical polar coordinate system dA = r

2

Ω

I =

r

2

Ω

dP

;

I ∝

r

2

1

So if distance increases 3 fold. The Intensity becomes

9

1

times the initial


A 40kg girl and a 50kg boy are facing each other on a friction-free rollerskates. The girl pushes the boy, who moves away at a speed of 3 m/s. What is the girl's
speed?
Your answer

Answers

Answer:

Explanation:

The Law of Momentum Conservation, just like the Law of Thermodynamics about energy, says that momentum is neither created nor destroyed but is conserved, meaning it has to go somewhere. If the girl pushes the boy and they are both on friction free skates, then the girl will also react to the push. Momentum Conservation says

[tex](m_gv_g+m_bv_b)_b=(m_gv_g+m_bv_b)_a[/tex] In words this says that the mass times the velocity of the girl plus the mass times the velocity of the boy before the push has to equal the mass times velocity of the girl plus the mass times velocity of the boy after the push. Mathematically,

[tex](40.0*0+50.0*0)_b=(40.0v+50.0*-3)_a[/tex]

The left side of this is equal to 0. On the right, I made the velocity of the boy negative. We could have made it positive and it wouldn't have mattered. The sign will only be important to the result because if the sign of the girl's velocity is the same as the boy's, she is moving in the same direction as he is; if it's different, she is moving in the opposite direction.

0 = 40.0v - 150.0 and

-40.0v = -150.0 so

v = 3.75 This means that when she pushes the boy one way, mometum is conserved and she moves in the opposite direction and at a greater velocity (because her mass is less). Physics is a wonderful thing, isn't it!?

When do we say that work is done?​

Answers

Answer:

Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.

Answer:

Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position

A piece of glass has mass of 1 kg and a density of 800 kgm-³ negative cubed calculate its volume​

Answers

Explanation:

we know that

v = m/d

or; v=1kg/800kgm^3

or; v=0. 00125m

Describe how a wind turbine generates energy.

Answers

The wind Wind turbines work on a simple principle: instead of using electricity to make wind—like a fan—wind turbines use wind to make electricity. Wind turns the propeller-like blades of a turbine around a rotor, which spins a generator, which creates electricity.

Do only number 3 and thank

Answers

Charge = 0.2 Ah is the correct answer...

Do solar panels create enough energy to power the car throughout the day?

Answers

Answer:

Yes, but only if it's sunny.

Explanation:

As you know, solar panels generate energy through the sun's rays of light (better known as sunlight). Therefore, as long as the sun is shining high in the sky, the car will generate electricity and be able to function. If this vehicle was only powered by solar panels, it would not function during the night, in cloudy areas, and/or in dark places (such as parking garages or home garages).

Hope this helps!

Which force determines if an object is going to move or stay at rest?
a. Friction Force
b. Normal Force
c. Applied Force
d. Net Force

Answers

Answer:

a

Explanation:

because it's need someone moving it so it can move somewhere else

the gravity on mars is 3.8 m/s2 and you weigh 200 N. your mass will be??

Answers

Answer:

Mass = 52.63 kilograms

Explanation:

Given the following data;

Acceleration due to gravity = 3.8 m/s²

Weight = 200 N

To find mass;

Mathematically, the weight of a physical object is given by the formula;

Weight = mass * acceleration due to gravity

Substituting into the formula, we have;

200 = mass * 3.8

Mass = 200/3.8

Mass = 52.63 kg

Which best describes the energy of a sound wave as it travels through a medium? It increases. It decreases. It remains the same. It depends on the medium.

Answers

Answer:

It depends on the medium

Explanation:

2021 edge

The energy of a sound wave decreases as it travels through a medium to another medium. Thus, the correct option is D.

What is a Sound wave?

A sound wave is the pattern of disturbance which is caused by the energy which is travelling away from the source of the sound in that medium. Sound waves are the longitudinal waves. This means that the propagation of these vibration of particles is parallel to the energy which this wave propagation direction has. When the atoms in the medium are set in vibration then they move back and forth in a direction. This continuous to occur in back and forth motion resulting in a high-pressure and a low-pressure region in the medium and thus propagating sound.

Sound wave is the physical vibration wave which travel through the air to reach the ears of organisms. Sound energy is the result when force makes an object to vibrate. A wave can lose energy as it travels through a medium because the medium can also absorb the energy from the wave. The medium changes some of the acoustic energy of the sound wave into heat energy.

Therefore, the correct option is D.

Learn more about Sound wave here:

https://brainly.com/question/21995826

#SPJ2

Some people can roll the tongue into a tube shape, while others cannot. Practicing is not likely to help because tongue-rolling is an inherited trait. The allele for rolling the tongue (R) is dominant to the allele for not being able to roll the tongue (r). Look at the Punnett square. It shows a cross between two parents with at least one R allele. Drag each option to its spot to correctly finish the Punnett square.

Answers

Hope this helps you.

Dad, if you are seeing this, then I have run away. Angie has been torturing me ever since you started dating her, and I have had enough of it. I have been trying to tell you, but you would never listen. Goodbye, and Angie, if you are seeing this, I posted this on here, so you will not be able to delete anything. Have a nice life

Answers

Answer:

hey are you ok!?!?!?!

Explanation:

Is Angie your Dad new gf or wife???

Answer:

:(

Explanation:

u ok?

running away from problems only makes things worse. Your teaching urself to run. but I dont blame u

anyway hope u find what ur looking for out there!!

The wind blows a leaf at 37.9 m/s for 118 s left. How are does the leaf go in that period of time.

A) 3.11 m, left
B) 4470 m, left
C) 80.1 m, left
D) 0.321 m, left

Answers

Explanation:

distance = velocity * time

d = 37.9 * 118

distance = 4472.2

CAN SOMEONE PLS HELP ME ILL GIVE YOU BRAINLIEST!!!!

A 7000 N braking force is used to slow a car down. The car was traveling at 25 m/s before the
brakes were applied and was traveling at 5 m/s after 6 seconds. What is the mass of the car? (ANS:
2100 kg)

Answers

Answer:

the answer is already there lol

Explanation:

Answer:

answer is there you can see from there lol

Explanation:

Can someone help me :)

Answers

Answer:

undergone a chemical change

Explanation:

Answer:

undergone a chemical change

when two capacitors are connected in series, the effective capacitance is 2.4muF and when connected in parallel, the effective capacitance is 10muF. calculate the individual capacitances.​

Answers

Answer:

let one capacitor be x and other be y

[tex]in \: parallel \: connection : \\ \frac{x + y}{xy} = 10 \times {10}^{ - 6} - - - (a) \\ in \: series \: connection : \\ x + y = 2.4 \times {10}^{ - 6} - - - (b) \\ in \: (a) : \\ \frac{2.4 \times {10}^{ - 6} }{xy} = 10 \times {10}^{ - 6} \\ xy = 0.24 - - - (c) \\ from \: (b) : \\ y = (2.4 \times {10}^{ - 6} ) - x \\ \therefore \: in \: (c) : \\ x(2.4 \times {10}^{ - 6} - x) = 0.24 \\ 2.4 \times {10}^{ - 6} x - {x}^{2} = 0.24 \\ {x}^{2} - 2.4 \times {10}^{ - 6} x - 0.24 = 0 \\ x = 0.5 \\ 0.5y = 0.24 \\ y = 0.48 \\ { \boxed{ C _{1} = 0.5 \: farads}} \\ { \boxed{C _{2} = 0.48 \: farads}}[/tex]

The diameter of a copper wire is thought to be approximately 0.3mm. Which instrument should be used to obtain a more accurate measurement of the diameter of the wire? A measuring tape B metre rule C micrometer D ruler 2

Answers

Answer:

C

Explanation:

The correct answer should be the micrometer.

The micrometer is an instrument that is capable of measuring the component of an object to very high precision. It is used to obtain accurate measurements in engineering.

In the case of the copper wire, the diameter of 0.3 mm was an approximation and a more accurate measure of the diameter would be obtained by using the micrometer.

The correct option is C.

2. A student drew the diagram below to model the movement of an object orbiting the Sun. Which object was she most likely modeling? a meteor a planet a comet an astroid

Answers

Answer:

A comet

Explanation:

The picture is of an elliptical orbit of a comet. You can tell it is a comet because of the tail. Also, I just took the test and it was a comet.

Other Questions
There are 2144 chickens and ducks in a farm. The total number or chickens and cows are 1456. The are 5 times as many ducks as cows. The farmer sells each chicken for 12 dollars. How much will he earn by selling all his chickens? A study was conducted to determine whether there were significant differences between medical students admitted through special programs (such as retention incentive and guaranteed placement programs) and medical students admitted through the regular admissions criteria. It was found that the graduation rate was 92.4% for the medical students admitted through special programs. Be sure to enter at least 4 digits of accuracy for this problem!If 12 of the students from the special programs are randomly selected, find the probability that at least 11 of them graduated.prob =At least 4 digits!If 12 of the students from the special programs are randomly selected, find the probability that exactly 9 of them graduated.prob =At least 4 digits!Would it be unusual to randomly select 12 students from the special programs and get exactly 9 that graduate?no, it is not unusualyes, it is unusualIf 12 of the students from the special programs are randomly selected, find the probability that at most 9 of them graduated.prob =At least 4 digits!Would it be unusual to randomly select 12 students from the special programs and get at most 9 that graduate?yes, it is unusualno, it is not unusualWould it be unusual to randomly select 12 students from the special programs and get only 9 that graduate?no, it is not unusualyes, it is unusual Write a short paragraph explaining which selection you preferred reading this week, Androcles and the Lion or Brushfire!, based on the story plot. You should include references to at least two parts of the drama (beginning, middle, and end). !NOW! Bennett budgeted $6,000 to spend on food for the year. If he spent $400 each month,which expression represents how much money Bennett had left after x months. evaluate 999^3 by using suitable identity A polycentric predisposition means: that Polynesian companies are more effective than companies from other cultures. individuals have a philosophy of management whereby strategic decisions are tailored to suit the cultures of the countries where the MNC operates. individuals have a way to look at multiple issues and make the same decision no matter what country they are working in. that people from more than two races can function better in international businesses. What are the characteristics of ionic compounds? Space debris left from old satellites and their launchers is becoming a hazard to other satellites. (a) Calculate the speed in m/s of a satellite in an orbit 980 km above the Earth's surface. What the measurements for b ? * just different problems* de que manera la union europea representa una forma politica de actuar que pretende cambiar la historia de occidente? Since there was limited work for free African Americans in both theNorth and the South, where did many freed slaves end up working? 6.05 Infections and HealthPlese don't report me i am trying to get the assigment done IntroductionContaminated water is a health risk, and not all populations have access to clean water. You are going to use household items to design, test and revise a water filtration system. New technologies undergo testing and revision before they are released to the public. This lab will simulate how the scientific process is used to solve problems. PurposeThe Purpose of your design is to filter dirt, sand and other sediment from swamp water. You do not need to make it drinkable during this design. You will begin with a water sample that has visible dirt, mud or other contaminants. You will design a way to filter the water and evaluate your design. You will not be able to test for microorganisms or to filter them out during this design process. Do not test the water by drinking it. Important: Do NOT drink the water in your experiment. MaterialsSwamp water (You can get this from an outside source like a hole in the ground, puddle, lake, river or swamp. Or, you may add dirt and sediment to tap water.) The starting sample should have visible dirt or sediment.You may use any household materials for your water filtration system. Here are some suggestions:CheeseclothOId t-shirtCoffee filters PantyhoseCotton ballsSock FunnelWater bottleData for Design One (6 points)Describe the appearance and smell of the swamp water before and after filtration. Use complete sentences and detailed examples.Skilled Scientist level from Rubric: Student gives thorough details about the appearance and smell of the water before and after the filtration for Design One and Design Two. Water before filtrationWater after filtrationDescription of appearanceDescription of smell or other physical characteristicsRate the visible cleanliness of the water on a scale of 1 to 10 with 10 being the cleanest.Feedback ( 5 points)Consulat a peer or a family member about ways your design could be improved. Describe the feedback and provide the name of the reviewer. These are only suggestions that you can use to plan for Design Two. Use complete sentences and detailed examples. Skilled Scientist level from Rubric: Student thoroughly describes the feedback received from peer/family member, and it is clear a meaningful exchange about ways to improve the design took place.List the name of peer/family member and relationship:Describe the feedback given by your peer/family member. What changes do they suggest you make to your design in order to clean the water better?Planning for DesignTwo (8 points)Use this space to plan out how to improve your water filter. Based on the feedback you received, what part are you trying to improve? Why did you make the changes that you did? Use complete sentences and detailed examples. You may include sketches or diagrams.Skilled Scientist level from Rubric: Student thoroughly explains the changes for the design and gives ample details about any improvements that were made. List materials used:Describe how Design Two will work:What part of your design are you trying to improve?Why did you make the changes you did?Data for Design Two (6 points)Use the data and feedback from your first design to make changes to your water filtration system. Test your new design. Record the appearance and smell of the swamp water before and after filtration. Use complete sentences and detailed examples.Skilled Scientist level from Rubric: Student gives thorough details about the appearance and smell of the water before and after the filtration for Design One and Design Two.Water before filtrationWater after filtrationDescription of appearanceDescription of smell or other physical characteristicsRate the visible cleanliness of the water on a scale of 1 to 10 with 10 being the cleanest.Conclusion (10 points)Use your data from Design One and Design Two to answer the following questions. Use complete sentences and detailed examples. Skilled Scientist level from Rubric: Student answers all questions using ample details and showing critical thinking skills to reflect on the design process. Summarize the appearance and smell of the swamp water before and after the filtering process using Design One.2. Describe the changes you made to your water filtration system.3. What feedback helped you make changes to your water filtration system? 4. Summarize the appearance and smell of the swamp water before and after the filtering process using Design Two. 5. What did you learn about the process of planning, testing and revising a design? What is the meaning of quetzal? I don't get it please Help me Musee des Beaux Arts by W. H Auden About suffering they were never wrong, The old Masters: how well they understood Its human position: how it takes place While someone else is eating or opening a window or just walking dully along: How, when the aged are reverently, passionately waiting For the miraculous birth, there always must be Children who did not specially want it to happen, skating On a pond at the edge of the wood: They never forgot That even the dreadful martyrdom must run its course Anyhow in a corner, some untidy spot Where the dogs go on with their doggy life and the torturer's horse Scratches its innocent behind on a tree. In Breughel's Icarus, for instance: how everything turns away Quite leisurely from the disaster, the ploughman may Have heard the splash, the forsaken cry. But for him it was not an important failure; the sun shone As it had to on the white legs disappearing into the green Water, and the expensive delicate ship that must have seen Something amazing, a boy falling out of the sky. Had somewhere to get to and sailed calmly on. Which of the following is a descriptive image from the poem above? O "About suffering they were never wrong" "That even the dreadful martyrdom must run its course" "white legs disappearing into the green" "They never forgot" please help me solveplease show how you got the answer 151116135139101136 164What is the value of x? PLEASE HELP List Two major conflicts from the Cold War How does the author illustrate the importance of radiotelescopes to scientific study?into What is the y-coordinate of the ordered pair that satisfies the system of linear equations? 6x+4y= -14-x - 5y=11 A. 2 B. 1C. -1D. -2