why audiotape, credit cards and videotape not placed closed to a strong magnet

Answers

Answer 1

Answer:

There are many possible causes of magnetic defects in credit cards. But there are two direct causes: 1. Close to a strong magnet 2. Damage from scratches or wear Even if used properly it can cause magnetic defects. But if used incorrectly, it can cause an immediate relapse. If you have never used a credit card due to magnetic defects, check what will cause magnetic defects and for example credit cardMagnetic stripe cards, such as credit cards and cash cards, are more likely to cause magnetic field defects if brought near magnetically generating objects such as magnets. Although exposure to strong magnets does not necessarily lead to failure. However, it should be kept away from objects that may cause magnetic field defects.

Explanation:

Answer 2

Magnetic fields can erase or distort the data stored on these items. The correct option is A.

Magnetic media are used to store information in a magnetic format on audiotapes, credit cards, and videotapes. They may have their magnetic patterns and particle alignment disturbed if they are placed close to a powerful magnet.

The stored data may be lost or damaged as a result. For instance, credit cards' magnetic stripes may become illegible, audiotapes may lose their sound quality or possibly be completely erased, and videotapes may have distorted or scrambled imagery and audio.

To preserve the accuracy and utility of the data they contain, it is crucial to keep these things away from strong magnetic fields.

Thus, the correct option is A.

For more details regarding magnetic field, visit:

https://brainly.com/question/14848188

#SPJ5

Your question seems incomplete, the probable complete question is:

Why audiotape, credit cards and videotape not placed closed to a strong magnet

A. Magnetic fields can erase or distort the data stored on these items.

B. Magnetic fields can cause these items to become permanently demagnetized.

C. Magnetic fields can cause these items to generate excess heat and potentially catch fire.

D. Magnetic fields can cause these items to emit harmful radiation.


Related Questions

HELPPPPPPPPPPP PLEASEEEEEEEEEEE

Complete this sentence. The solubility of a sample will ____________ when the size of the sample increases.


stay the same

decrease

increase

be unable to be determined

the answer is not decrease

Answers

The solubility of the sample will decrease

A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)

Answers

Complete Question

A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)

(a) u = 0 heavier block m/s2 m/s2 lighter block

(b)M = 0.035 heavier block m/s2 m/s2 lighter block

Answer:

a)  [tex]A_h=0.297[/tex]

   [tex]A_l=-0.59475[/tex]

b)  [tex]a=0[/tex]

    [tex]a=-0.25175m/s^2[/tex]

Explanation:

From the question we are told that:

Force constant [tex]k=3.05N/m[/tex]

Compression Length [tex]l_c=7.80cm=0.07m[/tex]

Left Mass [tex]M_l=0.400kg[/tex]

Right Mass [tex]M_r=0.800kg[/tex]

Coefficient of kinetic friction [tex]\mu=0, 0.035, and\ 0.397.[/tex]

Therefore

Spring force is given as

 [tex]F_s=Kx[/tex]

 [tex]F_s=3.05*0.070[/tex]

 [tex]F_s=0.238N[/tex]

Generally the equation for Acceleration is mathematically given by

 [tex]A=\frac{F}{m}[/tex]

For Heavier block

 [tex]A_h=\frac{F_s}{m_r}[/tex]

 [tex]A_h=\frac{0.238N}{0.8}[/tex]

 [tex]A_h=0.297[/tex]

For Lighter blocks

 [tex]A_l=\frac{F_s}{m_r}[/tex]

 [tex]A_l=\frac{-0.238N}{0.4}[/tex]

 [tex]A_l=-0.59475[/tex]

b)

Generally the equation for Force is mathematically given by

[tex]F_s-F=ma[/tex]

For Heavier block

[tex]F>Fs[/tex]

Therefore

[tex]a=0[/tex]

For Lighter blocks

[tex]F-F_s=ma[/tex]

[tex](0.035)(0.4)(9.8)-(0.2379)=(0.4)a[/tex]

[tex]a=-0.25175m/s^2[/tex]

The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.

Answers

we Know that gravitational field strength(g) at a point on a planet is equal to gravitational force exerted per unit mass placed at that point.
It Means,
g=F/m
Here,
g=gravitational field strength
F=Gravitational force
m=Mass
Case A
planet force =10 and mass= .5
g1=F/m
g1=10/.5
=100/5
g1=20m/s
case B
F=30 and m=2
therefore g2=30/2
g2=15m/s^2
case C
F=45 and m=3
g3=45/3
=15m/s^2
case D
g4=60/6
g4=10m/s^2
from above results it is clear that the gravitational field strength of planet D is minimum which is 10m/s^2 and gravitational field strength of planet A is maximum which is 20m/s^2

What is the energy of an electromagnetic wave that has a frequency of
4.0 x 109 Hz? Use the equation E = hf, where h = 6.626 x 10-34 J·s.

Answers

Answer:

[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]

Explanation:

Given the following data;

Frequency = 4.0 x 10⁹ Hz

Planck's constant, h = 6.626 x 10-34 J·s.

To find the energy of the electromagnetic wave;

Mathematically, the energy of an electromagnetic wave is given by the formula;

E = hf

Where;

E is the energy possessed by a wave.

h represents Planck's constant.

f is the frequency of a wave.

Substituting the values into the formula, we have;

[tex] Energy, \; E = 4.0 x 10^{9} * 6.626 x 10^{-34} [/tex]

[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]

Which image illustrates refraction?

Answers

Answer:

B illustrates refraction

Question 8 of 16
A book with a mass of 1.8 kg sits on a bookshelf. If it has a gravitational
potential energy of 42 J, how high is the shelf? The acceleration of gravity is
9.8 m/s2
A. 2.1 m
B. 0.9 m
C. 1.6 m
D. 2.4 m
SUBMIT

Answers

Answer:

Explanation:

PE = mgh where m is the mass, g is gravity, and h is the height from which the object can potentially fall. We are given enough info here to solve for h. Filling in:

42 = 1.8(9.8)h and

[tex]h=\frac{42}{(1.8)(9.8)}[/tex] and rounding to 2 sig fig's as we need:

h = 2.4 m, choice D

an image of a statue appears to be 11.5cm behind convex mirror with focal length 13.5cm. Find the distance from the statue to the mirror​

Answers

Answer:

77.625 cm

Explanation:

The given distance of the image behind the convex mirror, v = 11.5 cm

The focal length of the mirror, f = 13.5 cm

The mirror formula for convex mirror is given as follows;

[tex]\dfrac{1}{u} - \dfrac{1}{v} = -\dfrac{1}{f}[/tex]

Where;

u = The distance from the statue to the mirror

Therefore, we get;

[tex]\dfrac{1}{u} = -\dfrac{1}{f} + \dfrac{1}{v}[/tex]

Plugging in the values gives;

[tex]\dfrac{1}{u} = -\dfrac{1}{13.5} + \dfrac{1}{11.5} = \dfrac{8}{621}[/tex]

∴ The distance from the statue to the mirror, u = 621/8 cm = 77.625 cm.

when is the mass of an object if it exerts a force of 160 N and an acceleration of 8.15m/s^2

Answers

Answer:

f=ma.......m=f/a......m=20kg

A solution has a pH of 8. Which best describes the solution?

a strong acid
a strong base
a weak acid
a weak base

Answers

Answer:

D

Explanation:

a weak base is the answer

Answer:

weak base because its near to 7 (neutral) and above 7 is base

Which sentence best describes a role of gravity in the formation of the
universe?
A. Gravity caused the universe to expand from a central point.
B. Gravity caused background microwave radiation to be emitted as
the universe formed.
C. Gravity caused galaxies to move apart from one another in a
symmetrical way.
D. Gravity caused stars to come together and galaxies to form after
the big bang

Answers

Answer:

I think it's option D

Explanation:

I think it's option D but not so sure

¿Cuánto se demora el sonido en recorrer 3 metros de un cable de cobre, si su rapidez en él es de 3810 m/s

Answers

Answer:

1270 segundos

Explanation:

Dada,

Velocidad ( v ) = 3810 m/s

Distancia ( s ) = 3 m

Encontrar : -

Tiempo que tarda el sonido en viajar ( t ) = ?

Fórmula : -

s = d / t

t = d / s

= 3810 / 3

t = 1270 segundos

. When 2 moles of helium gas expand at constant pressure P = 1.0 × 105 Pascals, the temperature increases from 2℃ to 112℃. If the initial volume of the gas was 45 liters. Cp=20.8J/mol.K, Cv=12.6J/mol.K. Determine i. The work done W by the gas as it expands (4) ii. The total heat applied to the gas (2) iii. The change in internal energy (2

Answers

Answer:

i. Work done by the gas as it expands is approximately 1,900 J

ii. The total heat supplied is approximately 4, 576 J

iii. The change in internal energy is approximately 2,772 J

Explanation:

The constant pressure of the helium gas, P = 1.0 × 10⁵ Pa

The initial and final pressure of the gas, T₁, and T₂ = 2°C (275.15 K) and 112°C (385.15 K) respectively

The number of moles of helium in the sample of helium gas, n = 2 moles

The volume occupied by the gas at state 1, V₁ = 45 L

i. By ideal gas law, we have;

P·V = n·R·T

Therefore;

[tex]V = \dfrac{n \cdot R \cdot T}{P}[/tex]

Plugging in the values gives;

[tex]V_2 = \dfrac{n \cdot R \cdot T_2}{P}[/tex]

Where;

V₂ = The volume of the gas at state 2

Therefore;

[tex]V_2 = \dfrac{2 \cdot 8.314 \cdot 385.15}{1.0 \times 10^5} \approx 0.064[/tex]

The volume of the gas at state 2, V₂ ≈ 0.064 m³ = 64 Liters

Work done by the gas as it expands, W = P × (V₂ - V₁)

∴ W ≈ 1.0 × 10⁵ Pa × (64 L - 45 L) = 1,900 J

Work done by the gas as it expands, W ≈ 1,900 J

ii. The total heat supplied, Q = Cp·n·ΔT

∴ Q = 20.8 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 4,576 J

The total heat supplied, Q = 4, 576 J

iii. The change in internal energy, ΔU = Cv·n·ΔT

∴ ΔU = 12.6 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 2,772 J

The change in internal energy, ΔU = 2,772 J

. Una varilla de cobre de coeficiente de dilatación 1,4*10-5 °C -1 , tiene una longitud de 1.20 metros a una temperatura ambiente de 18 ˚C . ¿Cuál sera su longitud 100 ˚C

Answers

Answer:

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Explanation:

Asumiendo que la varilla de cobre experimenta deformaciones muy pequeñas y que las deformaciones no longitudinales son despreciables con respecto a las deformaciones longitudinales, la deformación longitudinal de la varilla se estima mediante la siguiente fórmula:

[tex]l_{f} = l_{o}\cdot [1+\alpha \cdot (T_{f}-T_{o})][/tex] (1)

Donde:

[tex]l_{o}[/tex] - Longitud inicial de la varilla, en metros.

[tex]\alpha[/tex] - Coeficiente de dilatación, en [tex]^{\circ}C^{-1}[/tex].

[tex]T_{o}[/tex] - Temperatura inicial de la varilla, en grados Celsius.

[tex]T_{f}[/tex] - Temperatura final de la varilla, en grados Celsius.

Si sabemos que [tex]l_{o} = 1.20\,m[/tex], [tex]\alpha = 1.4\times 10^{-5}\,^{\circ}C^{-1}[/tex], [tex]T_{o} = 18\,^{\circ}C[/tex] y [tex]T_{f} = 100\,^{\circ}C[/tex], entonces la longitud final de la varilla es:

[tex]l_{f} = (1.20\,m)\cdot \left[1 + \left(1.4\times 10^{-5}\,^{\circ}C^{-1}\right)\cdot (100\,^{\circ}C-18\,^{\circ}C)\right][/tex]

[tex]l_{f} = 1.201\,m[/tex]

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

please answer quick for brainlist ; )

Answers

Answer:

The diagram assigned B

explanation:

Check the direction of the two vectors, their resultant must be in the same direction.

Which labels are correct for the regions marked? a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium b. X: Faster in gases than liquids Y: Slowest in solids Z: Faster in liquids than gases c. X: Slower in solids than liquids Y: Velocity depends on medium Z: Faster in liquids than gases d. X: Velocity depends on medium Y: Fastest in gases Z: Slower in liquids than solids

Answers

Answer:

a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.

Explanation:

Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through.  In more rigid medium sounds velocity will be faster.

Please help me with this...
And write all steps..​

Answers

Use this equation acceleration= final velocity-Initial velocity/ time taken

a=v-u/t

Hope this help

Answer:

[tex]2\frac{m}{s^2} =a[/tex]

Explanation:

Use the kinematic equation.

[tex]v_{2} =v_{1} +at[/tex]

This equation can be derived from [tex]f=ma[/tex], but we can just memorize, or look them up when needed as it saves us time.

Now we can plug our measurements into each variable to solve for acceleration.

[tex]18\frac{m}{s} =8\frac{m}{s} +a*5s[/tex]

Subtract 8m/s from both sides.

[tex]10\frac{m}{s} =a*5s[/tex]

Divide by 5 seconds. Left with acceleration in terms of [tex]\frac{m}{s^2}[/tex]

[tex]2\frac{m}{s^2} =a[/tex]

A distressed car is rolling backward, downhill at 3.0 m/s when its driver finally manages to
get the engine started. What velocity will the car have 6.0 s later if it can accelerate at
3.0 m/s??

Answers

Answer:

Explanation:

Acceleration is equal to the change in velocity over the change in time, or

[tex]a=\frac{v_f-v_i}{t}[/tex] where the change in velocity is final velocity minus initial velocity. Filling in:

[tex]3.0=\frac{v_f-(-3.0)}{6.0}[/tex] Note that I made the backward velocity negative so the forward velocity in our answer will be positive.

Simplifying that gives us:

[tex]3.0=\frac{v_f+3.0}{6.0}[/tex] and then isolating the final velocity, our unknown:

3.0(6.0) = v + 3.0 and

3.0(6.0) - 3.0 = v and

18 - 3.0 = v so

15 m/s = v and because this answer is positive, that means that the car is no longer rolling backwards (which was negative) but is now moving forward.

22) How is it possible to fill medicine in a syringe?explain​

Answers

Pressure is what makes syringes work.By sequentially pulling and pushing the plunger, the syringe can incorporate and release liquid or air.

I hope this helps you ^-^

The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)​

Answers

Answer:

2000g

Explanation:

volume=mass/density

=2000/2.5

=800cm³

mass=density×volume

=800×2.5

=2000g

What observation related to spectral lines from distant galaxies provides
evidence for the big bang theory?
A. They appear just as they do on Earth.
B. They are shifted toward the blue end of the spectrum.
C. They fail to shift into the ultraviolet region.
O 0
D. They are shifted toward the red end of the spectrum.

Answers

They are shifted toward the red end of the spectrum.

The boiling point of water is 1000 C at sea level. The boiling point of butane is -1.50C… If we leave liquid butane in a bowl on a table in a room where the temperature is 240C, butane will

A. evaporate.
B. condense.
C. freeze.
D. melt.

Answers

Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Explanation:

A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.

For example, the boiling point of butane is -1.5 degree Celsius.

This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.

Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Question 4(Multiple Choice Worth 3 points)
(03.02 MC)

Which statement best reflects a change in weather?

Today is cloudy, but tomorrow will be clear and sunny.
The average rainfall has decreased over the past five years.
Ocean temperatures are projected to increase over time.
Glaciers are melting more rapidly now than in the past 100 years.
plzzz helpppp asap

Answers

Answer:

a is your answer.............

Which unit is equivalent to J/s?
O A. Meters
O B. Watts
O C. Newtons
O D. Calories

Answers

Watts, or one Joule per second

B. Watts

Then j/s is the rate of transferring energy or doing work. Its unit is the Watt, equivalent to 1 Joule per second.

PLEASE HELP!!!
Write the sentences in your copybook and draw a line through one of the words in
bold to complete each of these sentences about alkali metals correctly.

 Alkali metals generally become more / less dense going down the group.

 The melting and boiling points of alkali metals increase / decrease down the group.

 The softness of alkali metals increases / decreases going down the group.

 The speed with which alkali metals react with oxygen increases / decreases going
down the group.

Answers

Answer:

Densities increase down the group

MP and BP decrease down the group

Softness increased going down the group

Speed of reacting increases going down the group

A basketball is shot by a player at a height of 2.0m. The initial angle was 53° above the horizontal. At the highest point, the ball was travelling 6 m/s. If he scored (the ball went through the rim that is 3.00m above the ground), what was the player's horizontal distance from the basket?

Answers

At the ball's highest point, it has no vertical velocity, so the 6 m/s is purely horizontal. A projectile's horizontal velocity does not change, which means the ball was initially thrown with speed v such that

v cos(53°) = 6 m/s   ==>   v = (6 m/s) sec(53°) ≈ 9.97 m/s

The player shoots the ball from a height of 2.0 m, so that the ball's horizontal and vertical positions, respectively x and y, at time t are

x = (9.97 m/s) cos(53°) t = (6 m/s) t

y = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

Find the times t for which the ball reaches a height of 3.00 m:

3.00 m = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

==>   t ≈ 0.137 s   or   t ≈ 1.49 s

The second time is the one we care about, because it's the one for which the ball would be falling into the basket.

Now find the distance x traveled by the ball after this time:

x = (6 m/s) (1.49 s) ≈ 8.93 m

An airplane starts from rest and undergoes a uniform acceleration of 8.1 m/s2 for 19.4 s seconds before leaving the ground. What is its displacement?

Answers

Answer:  

GIVEN:

v₀=0ms⁻¹

a= 8.1ms⁻²

t= 19.4s

REQUIRE:

d=?

CALCULATUION:

as we know,

d=v₀t+1/2at²

by putting values

d=0ms⁻¹×19.4s+1/2×8.1ms⁻²×(19.4s)²

d=0m+1/2×8.1ms⁻²×376.36s²

d=1/2×3048.516m

d=1524.258m

d≈1524m

A policeman kicks in a door with a force of 4500 N. What force does the door apply to the policeman’s leg?

Answers

Answer:

-4500 N

Source: Brainly

The police officer must be angry 0_0

who is a meteorologist

Answers

Answer:

A meteorologist is a scientist that studies and examines Earth's atmosphere and its interactions with Earth's oceans, land, and biosphere.

Explanation:

Meteorologists use math and science to understand and predict changes in weather and climate.

Even through there is equal and opposite reaction,usually the two forces are not seen balanced.Why?

Answers

Answer:

This may refer to a situation like:

"one person pushes a box, if there is equal and opposite reaction why the box moves and the person does not?"

Remember the second Newton's law:

F = m*a

suppose that the mass of the person is 3 times the mass of the box.

So, if the box has a mass M, the person will have a mass 3*M

Then the Newton's equation for the box when the person pushes with a force F is:

F = M*a

solving for the acceleration, we get:

F/M = a

While the person is also pushed by the box with a force with the same magnitude, then the equation for the person is:

F = (3*M)*a'

Solving for the acceleration, we get:

F/(3M) = a'

Now we can compare the acceleration of the box (F/M) with the acceleration of the person (F/3M).

Is easy to see that the acceleration of the box is 3 times the acceleration of the person.

So regardless of the fact that both the box and the person experience a force with the same magnitude, the box will move more due to this force.

This is why in situations like this, the forces do not seem balanced.

A hydraulic jack is used to lift a car by applying a force of 120 N at the pump piston.

If the area of the ram and pump piston are 100 cm2 and 1m2 respectively:

(i)Calculate the force that is applied to the ram.

Answers

Answer:

I don't know.. sorry

Explanation:

help u next time

Other Questions
a neon light flashes 5 times every 10 seconds. show that the light flashes 43200 times in a day During weekly conference calls, Zeke, a sales manager for a national chain of clothing stores, and the other managers in his district explain to their district manager the reasons for different decisions; they also explain why certain costs and sales were higher or lower than they were the previous week. ________ is the explanation of their decisions and work results. Group of answer choices Accountability Touching A stepped decision A hierarchy of authority Power which two consecutive integers does q lie Select the correct text in the passage.Which part of the sentence needs to be revised to eliminate wordiness and redundancy?First and foremost, take time to plan your essay to create a stress-free environment when it's time to create your draft. Help me please guyyyyy please help! What is the definition of thermal chemistry?a.The study of change that involves warm objectsb.The study of change that involves heatc.The study of change that involves cool objectsd.The study of change that involves temperature Question 1 of 10 What is the plural form of l'tudiante? A. Des tudiantes. B. Une tudiante. C. Les tudiantes. D. Les tudiants. What is the value of A?Im confused on this one write 7 pi divided by 60 in degrees The length of the sides of a triangle are 1115 and 20 classify the triangle 7. What is transformation and describe how it has been done in a famousexperiment. What is an approximate average rate of change of the graph from X =22 and x = 26 Are there any combinations that give rise to both black and white-fur offspring? HELPPPP PLSSSS Which is true about the polynomial ? It is a binomial with a degree of 2. It is a binomial with a degree of 3. It is a trinomial with a degree of 2. It is a trinomial with a degree of 3. Thermodynamic Processes: An ideal gas is compressed isothermally to one-third of its initial volume. The resulting pressure will be Why is chlamydia less likely to be treated than pubic lice?O Chlamydia symptoms are often mild or absent, but pubic lice is visible and often causes itching.Chlamydia is a viral infection that cannot be treated, but pubic lice is an easily treated bacterial infection.O Chlamydia advances quickly to a stage-three incurable infection, but pubic lice has only one stage of infection.O Chlamydia only affects females, who seldom seek treatment for STIs, but pubic lice affects both males andfemales. CHANGE THE FOLLOWING SENTENCES INTO INDIRECT SPEECH1. Anuj said, I will leave for Delhi tomorrow.2. My uncle said to me, I am tired now.3. I said, I am waiting for my sister to arrive.4. The teacher said to us, you are very naughty.5. Veena said to her mother, I have finished my homework.6. Mr. Ravi said to his neighbor, My house is being built.7. Mrs. Gupta said to the doctor, My baby was crying all night.8. Chitra said, I will go to the shop today.9. The old man said to me, I have been trying to cross the road, but have not beenable to do so.10. Poonam said, I do not know how to make tea. When parents are unable to resolve the conflicts between them, a common pattern is to continue to argue through the children. When father says mother is too permissive, mother says father is too strict. Father may in turn withdraw, and mother responds to the child with excessive concern, focus, and devotion. The structural term which best describes the resulting family structure is _______________. Brian rolls 2 fair dice and adds the results from each.Work out the probability of getting a total that is prime which of the following is not an outcome for JUK ?