Explanation:
When chlorine bonds and becomes stable, (had a full outer electron shell), because we know that chlorine has 7 electrons in it’s outer shell, it requires 1 to gain noble gas structure. So, when if bonds with an element and then becomes stable, the gaining of an electron means it becomes a negatively charged ion. (an ion being a charged particle.)
If 16.4 grams of calcium nitrate is heated as shown in the reaction:
2Ca(NO3)2 -> 2CaO + 4NO2 + O2.
Calculate the volume of nitrogen dioxide produced at STP.
Answer:
7.2
Explanation:
you first have to find the number of moles of nitrogen dioxide by using the number of moles for calcium nitrate and the mole to mole ratios
number of moles of calcium nitrate=mass/mm
=16.4/102
=0.16g/mol
then you use the mole to mole ratios
2 : 4
0.16: x
2x/2=0.64/2
x=0.32g/moles of nitrogen dioxide
then you use the formula for the volume
v=22.4n
=22.4×0.32
=7.2
I hope this helps
what apparatus is used to investigate the conductivity of solutions
All three states of matter can be ____________ or a solvent in a solution.
Calculate the amount of mole(s) of CoF2 required to react with 12.8 moles of HCI.
CoCl2 + 2HF --> CoF2 + 2HCI
Explanation:
here's the answer to your question
Identify an element as a metal or a non-metal according to its position in the Periodic
Table
Answer:
Metals on the left of the Periodic Table.
Non-Metals on the top-right, plus Hydrogen.
Question 5: thanks you
Answer:
A linear molecule has a bond angle of 180°
Describe the principle and process for the manufractured of sulphuric acid witha a well labeled diagram by contact process.
The steps involved in the manufacture of sulphuric acid by contact process:
(1) Sulphur (or iron pyrites) are burnt in air to form sulphur dioxide.
S+O2→SO24FeS2+11O2→2Fe2O3+8SO2
(2) Catalytic oxidation of sulphur dioxide to sulphur trioxide.
2SO2+O2V2O52SO3ΔrHo=−196.6kJ
The reaction is reversible and exothermic.
(3) Sulphur trioxide is dissolved in 98% sulphuric acid to form oleum (fuming sulphuric acid).
SO3+H2SO4→H2S2O7
(4) Oleum is diluted with water to form sulphuric acid of desired concentration.
H2S2O7+H2O→2H2SO4
and
Manufacture of H2SO4 by contact process involves three steps:
1. Burning of sulphur in air to generate SO2.
2. Conversion of SO2 to SO3 by oxidation with air in the presence of
The atomic mass of calcium is calculated by adding the mass (amount) of
A) Protons and Electrons
B) Protons and Neutons
C) Electrons and Neutons
D) Protons and Protons
Answer:
B. Protons and Neutrons
Answer:
Option"B" is correct.
MARK ME BRAINLISTS
What does the prefix trans-indicate?
A. There are at least two double bonds in the molecule.
B. The carbons on either side of the double bond are pointed in
opposite directions.
C. The molecule is an alkane with no double bonds.
O D. The carbons on either side of the double bond are pointed in the
same direction
Answer:
B. The carbons on either side of the double bond are Pointed in opposite directions
Which sentence describes existing cells?
All cells, once formed, continue to live forever.
All cells come from previously existing cells.
All the cells that are on Earth have always been here.
All cells develop from the remains of other cells.
1 atm is equal to
O 1 mmHg
• 14.7 mmHg
• 76 mmHg
© 760 mmHg
Answer:
C 760 mm of hg
because this is the atmospheric pressure at sea level
True or false, The four units that must always be used when using the ideal gas are 44.0 liters
Answer:
for volume only liters can be used
Explanation:
Unknown # 41
Flame Test Color: Lilac
Addition of HCl(aq): NR (No reaction)
Addition of HCl(aq) and BaCl2(aq): NR (No reaction)
Addition of HNO3(aq) and AgNO3(aq): Yellow precipitate
What is the unknown ionic compound molecular formula?
Ting tong !!!!
Surprised!!!!!!!
Can you solve this question genius.
I need the answer.
Also I Have advantage for you if you help me on this question.
if you answer all questions with correct I will follow you! Marks as branlist!
Bye bye!!!!!!!! Answer it ok!!!
I have waste 50 pts on this. if you give me answer of other questions on this for pts I will report your answer
if you give me all answer of this I will make you brainlist.!!!!!!!
Plzzz help do your best to answer these questions
The empirical formula is the simplest formula of a chemical compound.
To find the empirical formula, we take the following steps;
Divide the percentage by mass of each element by its relative atomic mass.Divide the quotient of each by the lowest value obtained instep 1 aboveWrite the result of step 2 above as the subscript following each atom.1) O - 88.10/16, H - 11.190/1
O - 5.5, H - 11.19
O - 5.5/5.5, H - 11.19/5.5
O - 1, H - 2
Empirical formula = OH2
2) C - 41.368/12 H - 8.101/1, N - 32.162/14, O - 18.369/16
C - 3, H - 8, N - 2, O - 1
C - 3/1, H - 8/1 N - 2/1 O - 1/1
C - 3, H - 8, N - 2, O - 1
Empirical formula = C3H8N2O
To obtain the molecular formula where n = number of atoms of each element;
Molecular weight = 174.204 g/mol
[ 3(12) + 8(1) + 2(14) + 16]n = 174
n= 174/88
n = 2 (to the nearest whole number)
Hence, we have;
[C3H8N2O]2
The molecular formula is C6H16N4O2
3) C - 19.999/12, H - 6.713/1, N - 46.646/14, O - 26.641/16
C - 2, H - 7, N - 3, O - 2
C - 2/2, H - 7/2, N - 3/2, O - 2/2
C - 1, H - 4, N - 2, O - 1
Empirical formula - CH4N2O
https://brainly.com/question/1363167
Determine the grams of sodium chloride produced when 10 g of sodium react with 10 grams chlorine gas according to the equation 2Na + Cl2 = 2 NaCl
Answer:
16 g
Explanation:
Step 1: Write the balanced equation
2 Na + Cl₂ ⇒ 2 NaCl
Step 2: Identify the limiting reactant
The theoretical mass ratio (TMR) of Na to Cl₂ is 46:71 = 0.65:1.
The experimental mass ratio (EMR) of Na to Cl₂ is 10:10 = 1:1.
Since EMR > TMR, Cl₂ is the limiting reactant
Step 3: Calculate the mass of NaCl produced
The theoretical mass ratio of Cl₂ to NaCl is 71:117.
10 g Cl₂ × 117 g NaCl/71 g Cl₂ = 16 g NaCl
distinguish between sugar and non-sugar with examples.
Answer:
Reducing sugars are sugars where the anomeric carbon has an OH group attached that can reduce other compounds. Non-reducing sugars do not have an OH group attached to the anomeric carbon so they cannot reduce other compounds. ... Maltose and lactose are reducing sugars, while sucrose is a non-reducing sugar
WM "Please write the molecular formula for the following by criss cross method. 1. Calcium nitrate 2. Sodium bicarbonate 3. Magnesium nitrite 4. Sodium chloride 5. Hydrogen sulphate 6. Hydrogen chloride T-Aluminium bisulphate 8 Aluminium chloride 9. Aluminium sulphate 10. Hydrogen Nitrate
Answer:
1 Ca(NO3)2
Calcium- Ca, Valency 2
Nitrate- NO3, Valency 1
AFTER CRISS CROSS:
Ca1(NO3)2
Ca(NO3)2
2 sodium bicarbonate = NaHCO3
Na = Sodium = (Na)+
HCO3 = bicarbonate = (HCO3) -
Na HCO3
3 magnesium nitrite
+2 _ 1
Mg2(NO3)2
4 Na Cl
+1 _1
formula NaCl
5 hydrogen sulphide
H SO4
+1 _2
formula H2SO4
6 H Cl
+1 _1
HCl
7 AL2 HSO4
+2 -2
AL2(HSO4)3
8 NH4 Cl
+1 _1
NH4Cl
9 NH4 SO4
+1 _2
(NH3)2SO4
10 H NO3
+1 _1
HNO3
how can we separate the sugar from sugar solution
what is meant by reaction element
Answer: A reaction element are those elements that can take part in a chemical reaction.
Explanation:
An element is made up of atoms that has the same atomic number. It is the basic material of which all matter is composed of. These elements cannot be broken down further into smaller substances by any chemical reaction. Each element has a unique number of protons in its atom. For example,
--> a hydrogen atom has 1 proton,
--> a Helium atom has 2 protons,
--> a Lithium atom has 3 protons, and
--> a carbon atom has 6 protons.
A chemical reaction on the other hand involves rearrangement of the constituent atoms of reactants to create different substances as products. The bonds between atoms are either broken or created to form new molecules. There are different types of chemical reaction which includes:
--> Decomposition reaction
--> Neutralization reaction
--> single displacement reaction and
--> combustion reaction.
Which of the following is a common property of both strong acid and strong base?
a. They are good electrolytes
b. They are non-electrolytes
c. They are weak electrolytes
d. They are sour in test
Answer:
They are good electrolytes
Which of the following is the correct Lewis structure for methane (CHA)?
O A. H-C-H
H
I-0-I
OB. H-H-C-H-H
0
H
O c. H:C:H
H
OD H-C-H
The correct lewis structure of methane(CH4)
C. H:C:H:H
are standard electrode potential and standard hydrogen potential same?
Answer:
Potentials of any other electrodes are compared with that of the standard hydrogen electrode at the same temperature. Hydrogen electrode is based on the redox half cell: 2 H+(aq) + 2 e− → H2(g)..
2500m into kilometer
1 meter = 1000 km
2500 meter = 2500/1000 km
= 2.5 km
why water can reduce unpleasant smell that produce from methane gas ?
Answer:Water contains Oxygen the purified the methane gas
Explanation:
Using your answers from part C, complete the chemical formula of each compound. If the number of ions is 1, leave that
number out of the formula.
Drag each number to the correct location. Numbers may be used more than once
Answer:
1;1, 2;1, 3;1, 1;2, 1;1, 3;2, 1;3, 2;3, 1;1.
I hope this will help.
Answer:
This is what the answer looks like
Explanation:
What is known about a reaction with a positive enthalpy?
Answer:
"Endothermic reaction: In an endothermic reaction, the products are higher in energy than the reactants. Therefore, the change in enthalpy is positive, and heat is absorbed from the surroundings of the reaction."
Explanation:
When enthalpy is positive and delta H is greater than zero, this means that a system absorbed heat. This is called an endothermic reaction. When enthalpy is negative and delta H is less than zero, this means that a system released heat. This is called an exothermic reaction.
What does a high positive enthalpy mean?
The sign of q for an endothermic process is positive because the system is gaining heat. A chemical reaction or physical change is exothermic if heat is released by the system into the surroundings. Because the surroundings are gaining heat from the system, the temperature of the surroundings increases.
Learn more about the endothermic reaction here: brainly.com/question/6506846
#SPJ2
1. In regards to curly hair, which of the following statements
are TRUE? (select 2 answer choices).
A. Curly hair develops over time. It is not acquired at birth.
B. Curly hair can lead to harmful mutations in the body.
C. Curly hair results from a change in the gene that
codes for hair structure.
D. People with curly hair have different hair protein structures than people with
straight hair.
Answer here:
Answer:
A and D are the answers
Explanation:
the other two don't make sense
The statements C and D are correct, i.e., curly hair have different protein structure from straight hair and curly hair results from a change in the gene.
What is protein?Proteins are biomolecules made of amino acids. Proteins are very essential to all living things and contributes the body structure. Proteins are mainly up taken through diet and they are the main source of energy.
Hair is made of keratin protein. Keratin makes up our skin and nails too.Curly hair is originating by birth not developing over time. Curly hair is more likely to be occurring through inheritance.
The protein structure the hair follicle is some more bend for curly hair. Curly hair and straight hair originates from different gene traits. The gene type is inherited from the parents.
Hence, for people with curly hair have different protein structure and it result from a change in gene that code for hair structure. Thus options C and D are correct.
To learn more about proteins, refer the link below:
https://brainly.com/question/2193769
#SPJ2
7. What measures are applicable in the context of Nepal to push energy crisis further. Describe any three points clearly.
Answer:
which energy?........
Explanation:
..........................
........
....
What happens when The vapour obtained by dropping conc. H2SO4 in a mixture of KI and MnO2 is treated with hypo solution
The reaction between H2SO4 in a mixture of KI and MnO2 yields iodine which reacts with hypo solution by titration and the iodine is decolorized.
Iodine is decolorized.
The first reaction stated in the question occurs as follows;
2 KI (aq) + 2 H2SO4 (aq) + MnO2 (s) → MnSO4 (aq) + K2SO4 (aq) + I2 (s) + 2 H2O (l)
The reaction here is the formation of iodine from MnO2 and KI in the presence of dropwise H2SO4.
Hypo is the common name of sodium thio-sulphate or sodium hypo-sulfite.
The equation of the titration reaction is;
2Na2S2O3 + I2→ Na2S4O6 + 2NaI
When this reaction takes place, iodine is decolorized due to its reduction to I^-.
For more information see https://brainly.com/question/16857360
