While traveling on a commercial bus line, a passenger was injured when some luggage fell on him. As required by applicable state law, the bus company's in-house attorney conducted an investigation and filed the required report with the state transportation department. The passenger subsequently filed a civil action against the bus company in federal district court, seeking compensatory damages for the injuries he suffered. During discovery, the passenger's lawyer served on the bus company a request for production of documents, including a request for the report that the bus company filed with the state. The bus company objected to the request for the report and refused to produce it on the grounds that the report was privileged and protected from discovery under the work product doctrine. It did, however, produce other documents that were requested. The passenger then filed a motion to compel production of the report. If the court finds that the bus company's claims of privilege and work product were not substantially justified, what orders must the court make relating to the passenger's request for production of the report

Answers

Answer 1

Answer: See explanation

Explanation:

In a situation whereby the attorney of the passenger tried resolving the dispute in good faith, then the bus company must be ordered by the court to produce the report as well as the payment of reasonable cost that was incurred in making the motion.

It should however be noted that such cost may not be awarded when the movant had filed the motion before obtaining the disclosure in good faith. Also, the cost with be given when the nondisclosure response of the opposing party was justified.


Related Questions

Pat is insured with a life insurance policy and Karen is his primary beneficiary. They are both involved in an automobile accident where Pat dies instantly and Karen dies 5 days later. Which policy provision will protect the rights of the contingent beneficiary to receive the policy benefits

Answers

Answer: Common disaster clause

Explanation:

Based in the information given in the question, the policy provision that will protect the rights of the contingent beneficiary to receive the policy benefits is the common disaster clause.

According to the common disaster clause, the primary beneficiary must survive the insured usually by a period of 30-90 days and if this doesn't happen, the benefit will be paid automatically to the secondary beneficiary.

The common disaster clause simply explains that even though there's an accident which leads to the death of the insured and the beneficiary, it'll be possible to determine that it was the beneficiary whom died last and the benefit will be given to the person accordingly.

10. Publishing representatives who call on college professors to inform them of their company's new publications have a great deal of freedom in their jobs. They have only a general sales pitch, which they tailor as needed. Based on this information, we can say that the job of these publishing representatives ________.

Answers

Answer:

Scores low on degree of formalization

Explanation:

Degree of formalization of a process is the level to which the process is free of the personal input of the individual executing the process.

It implies that in high degree of formalization process execution is set and the same steps are followed by all participants.

In the given instance Publishing representatives have a great deal of freedom in their jobs.

They tailor their sales pitch as they see fit.

This shows a low degree of formalization in the sales process

4. Write 5 examples for each of small, medium and large occupation categories. ​help please

Answers

Small and mid-size enterprises are businesses that maintain revenues, assets or a number of employees below a certain threshold. Each country has its own definition of what constitutes a small and medium-sized enterprise Certain size criteria must be met and occasionally the industry in which the company operates in is taken into account as well.

A good manager: A. gives advice freely and frequently. B. is more result-oriented than relationship-oriented. C. has a judger mind-set and low self-awareness. D. schedules time for listening to employees each day. E. believes that listening too much is a sign of indecisiveness.

Answers

Answer:

B.

Explanation:

If you're asking a good manager that keeps the busniess running the answer is B because he would get the best money results.

If you mean the best manager because CO-workers like him the answer is A, but I don't think that's what you're asking so the answer is most likely B.

IF THE ANSWER IS SELECT ALL THAT APPLY,

-A

-B

-D

Toby operates a small deli downtown. The deli industry is monopolistically competitive. Toby, along with every other deli in town, is producing the quantity that minimizes average total cost. Assuming the delis are maximizing profits, the: Group of answer choices delis' prices equal their average total costs. number of delis will eventually increase. number of delis will eventually decrease. delis have excess capacity.

Answers

Answer:

number of delis will eventually increase.

Explanation:

A monopolistic competition is when there are many firms selling differentiated products in an industry. A monopolistic competition has characteristics of both a monopoly and a perfect competition. the demand curve is downward sloping. it sets the price for its goods and services.

An example of monopolistic competition are restaurants  

When firms are earning positive economic profit, in the long run, firms enter into the industry. This drives economic profit to zero

If firms are earning negative economic profit, in the long run, firms leave the industry.  This drives economic profit to zero

in the long run, only normal profit is earned

The deli industry in the town is still earning economic profit because it is producing the quantity that minimizes average total cost. Therefore, in the long run, more firms would enter in the industry.

Wolfe Company purchased a truck for $62,000, with an estimated useful life of 8 years and a salvage value of $10,000. The company uses the double-declining-balance method of depreciation; however, after year 3 they switch to the straight-line method. There is no change to the estimated useful life or salvage value. What is the accumulated depreciation balance at the end of year 5 (round to the nearest dollar)

Answers

Answer:

$42306

Explanation:

Depreciation expense using the double declining method = Depreciation factor x cost of the asset

Depreciation factor = 2 x (1/useful life) = 2/8

Depreciation expense in year 1 = 2/8 x 62,000 = 15500

Book value at the beginning of year 2 = 62,000 - 15500 = 46500

Depreciation expense in year 3 = 2/8 x 46500 = 11625

Book value at the beginning of year 3 =46500 - 11625 = 34,875

Depreciation expense in year 3 =34,875 x 2/8 = 8718.75

Book value at the beginning of year 4 = 34,875 - 8718.75 = 26156.25

Straight line depreciation expense = (book value of asset - Salvage value) / useful life

26156.25 - 10,000 / 5 = 16156.25 / 5 = 3231.25

Depreciation expense for the remaining 2 years =  3231.25 x 2 = 6462,50

total depreciation = sum of year 1 to 5 depreciation = 6462,50 + 15500 + 11625 + 8718.75 = $42306

Give examples if operational conflicts that could occur in a cross- cultural context because of different attitudes towards:1) time, 2) individualism. Give a country or region that would be different from the US for each of the two variables. (2.5 points).

Answers

Answer:

simple

Explanation:

The role of culture in influencing international business management practices and approaches is an undisputed fact [1, 2]. Studies have shown repeatedly that national cultural systems as well as individual cultures greatly affect the corporate cultural system [3, 4] in many ways. For example, national culture influences managerial decision-making, leadership styles, and human resource management practices [5, 6]. Similarly, national cultures affect managerial functions such as communication, motivation, organizational design, people’s expectations of work design, and reward systems [7]. Moreover, organizational polices (e.g., human resource polices) are influenced by various national institutions such as labor laws, educational and vocational training practices, and industrial standards and regulations [8]. In essence, culture organizes values into mental programs and the behavior of people within organizations is an enactment of such programs [9]. Organizations can be the same in such objective dimensions as physical plant, layout, or product, yet very different in the meanings, which the surrounding human cultures read into them [10]. Not only technologies and markets shape organizational culture, but by the cultural preferences of leaders and employees, national culture has a strong impact on people’s interpretations, understandings, and assessment of those with whom they work. Cultural values are important for interpersonal trust, teamwork, and the role of women in the workplace, among other issues [11, 12].

Organization costs must be expensed as incurred. b. A copyright should be considered an intangible with an indefinite life. c. The registration of a trademark or trade name lasts for 20 years and is nonrenewable. d. A patent should be amortized over the shorter of the inventor's life or its economic life.

Answers

Answer:

c. a patent should be amortized over the shorter of the inventor's life or its economic life

Explanation:

Which of the following statements concerning intangibles is true?

a. a copyright should be considered an intangible with an indefinite life

b. organization costs must be expensed as incurred

c. a patent should be amortized over the shorter of the inventor's life or its economic life

d. the registration of a trademark or tradename lasts for 20 years and is non-renewable

Patents are a right granted to an inventor to exclusively sell a product for a specific period of time usually for 20 years. During this period, others are prevented from making, using, or selling the invention. A patent should be amortized over the shorter of the inventor's life or its economic life.

Types of patents include:

1. utility patents

2. design patents

3. plant patent

Copyright gives the inventor of a product and anyone they give the permission to the right to reproduce the product. Copyrights have limited lives

A lease provides that a retail tenant pays $900 minimum rent per month plus 3% of the gross sales in excess of $200,000 per year. If the tenant paid a total rent of $20,520 last year, what was the gross sales volume

Answers

Answer:

45,650

Explanation:

The gross sales volume was $45,650.

What was the gross sales volume?

The entire quantity of incoming income throughout a specific time frame.

Gross sales are discussed with the grand overall of all income transactions over a given time period. this doesn't encompass the cost of income or deductions

sales volume refers to the number of units your corporation sells at some point of a selected reporting duration. this era may be a month, a quarter, or a year relying on what degree of sales extent you are in search of to research. buyers often study sales volume to assess the fitness of a developing or contracting business enterprise.

To calculate gross sales, upload the total income revenue for a specified time period—monthly, quarterly, or annually.

The minimum rent per month is $900.

gross sale percentage =  3%

The tenant paid a total rent of $20,520 last year.

The gross sales volume = $45,650.

Learn more about the gross sale here:-https://brainly.com/question/4177260

#SPJ2

Capital budgeting decisions ______. Multiple select question. involve an immediate cash outlay in order to obtain a future return are day-to-day decisions made by managers require little or no thought before being made require a great deal of analysis prior to acceptance

Answers

Answer:

involve an immediate cash outlay in order to obtain a future return

require a great deal of analysis prior to acceptance

Explanation:

A capital budgeting decision refers to an investment and the financial commitement. If we considered a project so here the business is making the financial commitment and at the same time it invest in the longer period that have an influence on the future projects

So it is an instant cash outflow for gaining a future return and also have a great deal before accepting it

The Learner Company uses the weighted average method. Learner's beginning work in process consists of 6,600 units (100% complete with respect to materials and 60% complete with respect to conversion costs). The number of units completed during the period is 126,000. The ending work in process consists of 10,500 units (100% complete with respect to materials and 30% complete with respect to conversion costs). What are the equivalent units of production with respect to conversion costs

Answers

Answer: 129150

Explanation:

Based on the information given in the question, the equivalent units of production with respect to conversion cost will be calculated thus:

Equivalent Units = Units Completed + Units in EWIP × Fraction of conversion cost

= 126,000 + (10,500 × 0.30)

= 126,000 + 3150

= 129,150 units

Therefore, the equivalent units of production with respect to conversion costs is 129150 units

A client has a third-degree burn on the leg. The wound is being treated by the open method. After about 4 days, a hard crust has formed around the leg and is impairing the circulation to the leg. What procedure would be done to relieve pressure on the affected area?
A. escharotomy
B. debridement
C. allograft
D. silvadene application

Answers

your answer is third hope it's helpful to you

Allograft procedure would be done to relieve pressure on the affected area.

What is Allograft?

Allograft refers to the transplant of an organ or tissue from one person of the same species to another with a different genotype. For instance, an allograft is a transplant from one individual to another who is not an identical twin. Many human transplants, including those involving cadaveric, live related, and living unrelated donors, use allografts. also referred to as a homograft or an allogeneic graft.

Allografts can be used in a variety of conditions with varied degrees of severity. For instance, bone allograft transplants can be utilized for more cosmetic purposes in dentistry or plastic surgery, as well as to repair limbs in orthopedics.

Allograft transplants can be employed both during the operation and directly for the treatment of patients. A type of bone putty created from donated bone or tissue material is called a demineralized bone matrix. Musculoskeletal allograft transplants are the most popular kind of allograft transplants.

This relates to one of the primary justifications for the use of allograft transplants: synthetic materials can have characteristics that differ from those of biologically human tissue and may not be appropriate for the intended application. In addition, tissue from an allograft transplant usually fuses with the recipient's own tissue over time, becoming an indistinguishable component of the recipient's body. If one's own tissue cannot be used in sufficient quantities, allograft transplants may be employed.

Tissues can be prepared for allograft transplantation using a variety of techniques. To get rid of as many cellular components as feasible, the tissue is treated with antibiotics, and detergents during aseptic processing.

It is also possible to chemically sterilize allograft tissue using the sterilization process. Gamma irradiation, a type of electromagnetic radiation that purges the tissue of microorganisms, is frequently combined with this. However, viruses might not be eliminated by gamma radiation.

Hence, correct option is C.

To learn more about allograft, click here
https://brainly.com/question/453869?
#SPJ2

Manufacturing cycle time is best defined as the: length of the work shift, expressed in minutes per day. time it takes a unit to move from one workstation to the next. time between the start of one unit and the start of the next unit. sum of all the task times to make one unit of a product. time from raw materials receipt to finished product exit.

Answers

Answer:

time from raw materials receipt to finished product exit.

Explanation:

Manufacturing cycle time is best defined as the "time from raw materials receipt to finished product exit."

To explain better, manufacturing cycle time is the overall time of process that covers the total duration it takes the final production of commodities to be made. That is beginning from the inception stage which is usually raw materials through its conversion stage and eventually into finished goods.

True or false: Regulations prohibit insider trading. It is illegal for anyone to transact in securities to profit from inside information, that is, private information held by officers, directors, or major stockholders that has not yet been divulged to the public. True false question. True False

Answers

Answer:

the answer for this would be true

Which of the following is not a form of business combination?: (A) Acquisition. (B) S Corporation. (C) Conglomerate. (D) Merger.

Answers

Answer:

b.corporation is answer

Labor and management at Leo Trucking cannot seem to agree upon a contract for the truck drivers. As each side contends that they are bargaining fairly, no agreement seems to be possible. The drivers are threatening to go on strike, and management knows that such a strike would prove to be costly. None of the parties involved in the dispute wants to reach a win-win agreement. They are each highly focused on their demands, which they would like to achieve, otherwise known as their ________ points. target tolerance focal distribution resistance

Answers

Answer:

resistance points

Explanation:

In simple words, The resistance level can be understood as the lowest point where a mediated settlement will be accepted. For a vendor, this implies the smallest number (minimum) or end result they are willing to take, whereas for a purchaser, it implies the highest number (upper limit) or bottom boundary they are willing to spend.

Thus, from the above we can conclude that the correct answer is resistance point.

Thomas, the Department Head of the meat processing unit of a food manufacturing company, refuses to allow an OSHA (Occupational Safety and Health Administration) compliance inspector to carry out the inspection process. In this scenario, what action can the OSHA inspector take

Answers

The action that should be taken by the OSHA inspector is to generate the search warrant so that they could enter into a unit.

The inspection process is the process where the inspection could be done with regard to

Quality of products. Identify the defective products if any.Reveal any hazardous product if any.

Since the department head of food manufacturing company refuses to allow an OSHA for carrying out an inspection process so for this:

The search warrant should be produced so that they could be able to enter into the unit and check whether everything is fine or not. If anything is not fine so the proper penalty should be charged for the same.

Therefore we can conclude that The action that should be taken by the OSHA inspector is to generate the search warrant so that they could enter into a unit.

Learn more about the OSHA here: brainly.com/question/20475809

President Hoover's approach to the Great Depression was to a leave the economy alone to work itself out of trouble. b nationalize major industries. c encourage the states to stimulate spending. d work for the breakup of business monopolies. e offer federal assistance to businesses and banks but not individuals.

Answers

Answer:

e. offer federal assistance to businesses and banks but not individuals.

Explanation:

Herbert Clark Hoover was democratically elected as the 31st President of the United States of America and he served from the 4th of March, 1929 to the 4th, March, 1933.

The Great Depression was a period of severe economic meltdown or downturn (crisis) of the industrialized world and it started from the United States of America, typically lasting for about ten years (1929-139).

Basically, the Great Depression started in America on the 4th of September, 1929 as a result of a major fall in the prices of stocks and consequently, leading to a stock market crash on the 29th of October, 1929.

Hence, the negative effects of the Great Depression includes a decline in investments, tax revenues, market price, personal income level, consumer spending, profits and a general rise in unemployment rate.

As a result of the aforementioned negative effects, struggling businesses had to lay off workers in order to try to remain open during the Great Depression.

However, President Hoover's approach to the Great Depression was to offer federal assistance to businesses and banks but not individuals.

Angie needs a new dishwasher. She saw a great sale on the model she wanted and went down to her local appliance store. When she got there, the store owner said that they no longer had that dishwasher, but they would be happy to sell her a different model at a higher price. Why might the Federal Trade Commission be willing to look into this?

A.
It is false advertising.

B.
It is creating an invalid debt.

C.
It is preventing fair competition.

D.
It is an improper debt collection.

Answers

Answer:

A. It is false advertising.

Explanation:

Advertisement refers to the promotional multimedia messages designed and developed to make the products or services of a company known to its customers and potential customers.

The Federal Trade Commission (FTC) is an agency of the government of the United States of America saddled with the responsibility of promoting consumer protection and the enforcement of all civil antitrust laws.

Basically, the laws formulated or established by the FTC are to provide protection for consumers of various goods and services while requiring that businesses do not make false claims about them.

Furthermore, the consumer protection laws enforceable by the Federal Trade Commission (FTC) guarantees truthful information in the marketplace at all times. This is achieved by requiring that business firms only make claims about their products and services that can be proven.

In this scenario, the Federal Trade Commission might be willing to look into this issue (advert of the dishwasher model) because it is false advertising.

Mark Green is considering buying a new Honda Accord. The purchase price of the car is $21,000 but Mark has a trade-in worth $4500. Mark needs a loan to buy the car and knows that his local bank requires him to put down 10% of the purchase price after the value of the trade-in is considered. Mark also knows that bank will charge 8% for the loan and require monthly payments over the next 4 years. What is the minimum down payment that Mark can make

Answers

Answer:

the minimum down payment that Mark can make is $1,650

Explanation:

The computation of the  minimum down payment that Mark can make is given below:

Purchase price $21,000  

Less: Trade In -$4,500

Net price $16,500

So, the down payment needed should be

= 10% of $16,500

= $1,650

Hence, the minimum down payment that Mark can make is $1,650

In measuring GDP as the sum of all incomes earned in production, we should include: purchases of used goods. purchases of used goods. American purchases of foreign output. American purchases of foreign output. wages and salaries. wages and salaries.

Answers

Answer:

wages and salaries.

Explanation:

GDP is an acronym for Gross Domestic Products (GDP) and it can be defined as a measure of the total market value of all finished goods and services made within a country during a specific period.

Simply stated, Gross Domestic Products (GDP) is a measure of the production levels of any nation.

Basically, the four (4) major expenditure categories of GDP are;

I. Consumption (C).

II. Investment (I).

III. Government purchases (G).

IV. Net exports (N).

Additionally, it is a measure of the total income of all individuals in an economy and the total expenses incurred on the economy's output of goods and services in a particular country.

In measuring GDP as the sum of all incomes earned in production, we should include wages and salaries of the people working in a particular country.

If you borrow $421 for 9 years at an interest rate of 4%, how much interest will you pay?

Answers

I will assume it as simple interest as nothing is mentioned

SI = (P × R × T)/100

SI = (421×4×9)/100

SI = 15156/100

SI = 151.56

You will pay $151.56

Answered by Gauthmath must click thanks and mark brainliest

How have people been lately good? bad? something else?

Answers

Answer:

People have been very bad lately

A property owner owned a tract of land that he leased to a baker for 27 years. The baker built a large bakery on the property. The baker then sold the bakery building to a buyer, assigning the lease with the property owner's approval. The buyer has failed to make a rent payment for several months and has also failed to build the cafe that the baker had agreed to build in the original lease. Who can the landlord of the property hold liable

Answers

Answer: The Baker

Explanation:

Payment is a form of contract and until payment has been done with papers signed it is not yet an agreement or a contract. The baker is still liable for anything that has to do with the land, the buyer has not paid any money and is not responsible. The landlord would hold the baker accountable, while the baker has to keep in touch with the buyer to know his interest in the property but till then, the baker is to be held accountable.

Aesha works for a moderately priced running shoe manufacturer and while their products are lower in cost, there is a high degree of consumer pressure to create the best quality running shoes possible and to constantly innovate with new designs. Which aspect of Porter’s Diamond does this demonstrate

Answers

Answer:

Demand conditions

Explanation:

Demand conditions means the size and the nature of the customer base for the products that could result in innovation and the improvement related to the product.

Since in the given situation it is mentioned that their products contains less cost but they develop the best quality shoes also they innovate the products from time to time so this represent the demand conditions

Rivalry among competing sellers is generally more intense when Group of answer choices industry conditions tempt competitors to use price cuts or other competitive weapons to boost unit volume. barriers to entry are high and buyer switching costs are high. barriers to entry are moderately high and the pool of likely entry candidates is small. buyer demand is growing rapidly. the industry's driving forces are strong and rivals have strongly differentiated products.

Answers

Answer:

industry conditions tempt competitors to use price cuts or other competitive weapons to boost unit volume.

Explanation:

Rivalry refers to the competitions that take place among firms in an industry with the aim of capturing greater market share

rivalry is influenced by :

1. barriers to entry :

If barriers to entry is high, there would be few firms competing for customers, so there would less intense rivalry

2. differentiation of goods in the industry :

If goods are differentiated, goods are unique from that of competitors. so there would be less need for intense rivalry

Previous
4
Next
Lifelong Learning: Mastery Test
4
Select the correct answer.
Why do many organizations encourage their employees to be lifelong learners?
O A employees will be more able to handle increasing responsibilities
OB. employees will be more likely to follow company policies
OC employees will be more likely to remain loyal to the company
OD. employees will be more likely to interact well with each other
Reset
Next

Answers

Answer: A. employees will be more able to handle increasing responsibilities.

Explanation:

Lifelong learning refers to the ongoing pursuit of knowledge for personal or professional reasons. When a person is a lifelong learner, such person has a growth mindset and pushes himself or herself to find new ideas to solve challenges.

Several organizations encourage their employees to be lifelong learners in order for such employees to be able to handle increasing responsibilities. Some organizations send their employees to study some courses which will help in their growth and development and also to be able to handle certain responsibilities.

Bryan works as a salesman for Jumbo Corp. Last year his sales target was $3 million. This year in an aggressive bid for growth, the company increased the sales quota for all its sales people to $5 million, although the market for Jumbo Corps products had slowed. In order to meet his target, Bryan bribed an official of a potential customer. The roots of his unethical behavior can be traced to ___ cultural differences in countries. varying ethical standards in different nations. unrealistic performance goals. strong personal ethics among employees.

Answers

Answer:

unrealistic performance goals.

Explanation:

Unethical action is defined as one that is carried out by an individual that is seen as wrong or outside of expected behaviour in a particular environment.

In the given scenario Bryan bribed an official of a potential customer.

However his action is as a result of the company increasing the sales quota from $3 million for all its sales people to $5 million.

This is despite the market for Jumbo Corps products having slowed.

The target was unrealistic driving Bryan to take the action he did

What is the basis of the law of demand?
Group of answer choices

Self-interested behavior

Marginal utility

Utility curves

Market timing

Answers

market timing

Explanation:

because that way u wont miss customers

Karen has been asked to head a team at work that is charged with finding new ways to develop products for their marketing group. She has asked her team members to begin exploring approaches that have worked in the past and to identify approaches that have not worked before. Karen wants her team members to start the process of Group of answer choices

Answers

Answer:

C. adopting a questioning attitude.

Explanation:

Since in the question it is mentioned that they have to develop the products for the marketing group so for this they started to exploring the approaches that worked on the past and identified those approaches that does not worked before so here she wants that the process should be begins by adopting the questioning attitude that means they are capable to identify the errors facing in a activities they perfomed

Therefore the option c is correct

Other Questions
easy algebra question below first correct answer gets brainliest What is the verbs and adverbs in this passage please help What is the sum of the reciprocals of all the factors of 24. Both 1 and 24 areconsidered to be factors of 24.A: 59/24B: 5/2C: 65/24D: 53/24E: 41/24 a) Un edificio proyecta una sombra de 15 m de largo. Al mismo tiempo, un nio de 1.15 m de alto proyecta una sombra de 3.75 m de largo. Qu altura tiene el edificio? Dibuja y realiza las operaciones correspondientes para obtener la respuesta correcta. 1. To be a true democracy, what must a governmentdo?a. Grant free speechb. Grant free electionsc. Rule by Lawd. All of these LET R equal the rental fee for one locker write an equation that represents the situation Find the length of side x in simplest radical form with a rational denominator.459495Answer: 2 =Submit AnswerHELP HELP HELP HELP PLSSSSSSS What does Armstrong mean when he says "one small step for a man , one giant leap for mankind"? pls help i want it now What are the physical characteristics that all specimens have in common math is a bummer bro Two heterozygous dominant parents for attached earlobes are crossed to predict the traits of their offspring. What is the ratio of attached earlobes to unattached earlobes in their offspring? A - 3:1B - 1:3C - 2:2D - 4:0 31. The/they/get/had/off/before/of/the/turn/light/office/out Ruth is touring New York City with her family. They want to visit the Empire State Building, Central Park, and Times Square before their dinner reservations at 7:10 P.M. They want to spend 1 hour and 25 minutes at the Empire State Building, 2 hours and 5 minutes in Central Park, and 50 minutes in Times Square. What is the latest time Ruth's family can start their tour in order to make it to dinner on time?Pls help :) which value of -7(x2-6)+2y when x=2 and y=6 9)Using appropriate properties , find 7551231275115 Which is a benefit of binomial nomenclature?1.Fewer common names2.Increased understanding and communication3.Reduced plant-related poisoning4.Better understanding of genetics of plants 18. If the ratio of males to females in eachof two different mathematics classesis 5 to 4, is the ratio of males tofemales still 5 to 4 if the classes wereconsidered as one large class insteadof two smaller classes?Ra Can you find the area of the figure? Can someone please help me with this I don't understand take your time if you can explain it