which type of clectrical circuit is represented by this diagram?​

Answer:

As per my experience Egor Popov is one the best book for mechanics of materials.

Explanation:

hope this helps

Answer:

Hey mate......

Explanation:

This is ur answer.....

Hope it helps!

Brainliest pls!

Follow me :)

Answer:

B

Explanation:

Anxiety is very common especially nowadays but it's especially common in psychological disorders

Answer:

No it is not permitted

Explanation:

It is not permitted  because as per NEC 410.21 policy no other conductor is allowed to be passed through integral junction box luminaries unless such conductor supply recessed luminaries.

The marking will show that the Luminaries is of the right construction or right installation to ensure that the the conductors ( in the outer boxes ) will not be exposed to temperatures greater than the conductor rating, hence the lack of marking makes it not to be permitted.

A project is meant to achieve clearly defined goals within present constraints

The correct option for the source of work in a project which is NOT a source of authorized work to be performed is option (a)

a. Scope creep

The reason for the selecting the above option is as follows;

In project management, alongside work planned in a work package, authorized work to be performed can come from;

A scope creep, however, is generally is due to the inclusion of the end

users of the project at a time that is behind schedule, insufficient analysis of

the requirements, and project complexity underestimation. and consists of

changes made after a project has commenced

A scope creep therefore, changes the amount of work to be done which

therefore alters the project timeline, and due to project, budgetary, and

end user constraints, CANNOT be a source of authorized work to be

performed

The correct option for the source that is NOT a authorized work to be performed is option a. Scope creep

Learn more about scope creep here:

https://brainly.com/question/14061926

Answer: Create lessons learned at the end of the project.

Explanation:

Lessons learned are the experiences that are gotten from a project which should be taken into account for the future projects. Lesson learned are created at the end of the project.

The main objective of the lessons learned is that they show both the positive experience and the negative experience of a project and this will help the future projects that will be undertaken.

Answer:

Explanation:

Increased by the constant. Take a very simple case.

4  +  5 +  6 = 15

The mean is 5  (obtained by dividing the total (15) by the number of terms (3).

Now add a constant say 6

4 + 6 = 10

5 + 6 = 11

6 + 6 = 12

Total = 33/3 = 11

So the mean 5 is increased by the constant 6.

Now do the same thing more symbolically.

4 + c

5 + c

6 + c

Total = 15 + 3c

Divide by 3 you get 5 + c

If you want a more formal proof involving n terms, leave a note.

Answer:

forward voltage triggering

temperature triggering

dv/dt triggering

light triggering

gate triggering

Then turning off;

Turn off is accomplished by a "negative voltage" pulse between the gate and cathode terminals

Explanation:

hope it helps

Complete Question

Nitrogen (N2) flows through a pipe, entering at at 4 m/sec at 1000 kPa, 2270C. For a pipe inside diameter of 3 cm, find the volumetric flow rate (m3/sec) and the mass flow rate of the gas (kg/sec) assuming you have an ideal gas Then using your ideal gas mass flow rate find the rate at which enthalpy enters the pipe (kJ/sec) NO Cp, Cv, k permitted

Answer:

[tex]H=9.91kJ/sec[/tex]

Explanation:

From the question we are told that:

Velocity [tex]v=4 m/sec[/tex]

Pressure [tex]P=1000kPa[/tex]

Temperature [tex]T=227 \textdegree C[/tex]

Diameter [tex]d=3cm=>0.03m[/tex]

Generally the equation for volumetric Flow Rate is mathematically given by

[tex]V_r=(\frac{\pi*d^2}{4}v)[/tex]

[tex]V_r=(\frac{\pi*(0.03)^2}{4} *4)[/tex]

[tex]V_r=0.002827m^3/s[/tex]

Generally the equation for mass Flow Rate is mathematically given by

[tex]m_r=\frac{PV_r}{RT}[/tex]

[tex]m_r=\frac{1000*0.002827}{0.297*(227+273)}[/tex]

[tex]m_r=0.019kg/sec[/tex]

Generally the equation for mass Flow Rate is mathematically given by

Using gas Table for enthalpy Value

[tex]T=500K=>h=520.75kg[/tex]

Therefore

[tex]H=mh[/tex]

[tex]H=0.019*520.75[/tex]

[tex]H=9.91kJ/sec[/tex]

Answer:

not understand language

Answer: The tracer lathe is a roughing operation for the output shaft on rear wheel drive transmissions.

Explanation:

Answer:

348 g

Explanation:

The heat gained by the ice equals the heat lost by the hot tea.

Also, since we require a very, very small amount of ice and some water, to still have some ice, the temperature of the hot tea has to decrease to the melting point of ice which is 0°C. So, the final temperature of the mixture is 0 °C.

So, mc(T - T') + mL = -MC(T - T") where m = mass of ice, c =  specific heat of ice = 2090 J/kgK., T = final temperature of mixture = 0 °C, T' = initial temperature of ice = -12 °C, L = heat of fusion of H2O = 3.33 × 10⁵ J/kg, M = mass of hot tea = ρV where ρ = density of tea = 1.00 g/mL and V = volume of hot tea = 350 mL. So, M = ρV = 1.00 g/mL × 350 mL = 350 g = 0.350 kg, C = specific heat of tea = 4190 J/kgK and T" = initial temperature of tea = 85 °C.

Making m subject of the formula, we have

mc(T - T') + mL = -MC(T - T")

m[c(T - T') + L] = -MC(T - T")  

m = -MC(T - T")/[c(T - T') + L]

substituting the values of the variables into the equation, we have

m = -MC(T - T")/[c(T - T') + L]

m = -0.350 kg × 4190 J/kgK(0 °C - 85 °C.)/[2090 J/kgK(0 °C. - (-12 °C)) + 3.33 × 10⁵ J/kg]

m = -1466.5 J/kK(- 85 °C)/[2090 J/kgK(0 °C + 12 °C)) + 3.33 × 10⁵ J/kg]

m = 124652.5 J/[2090 J/kgK(12 °C) + 3.33 × 10⁵ J/kg]

m = 124652.5 J/[25080 J/kg + 3.33 × 10⁵ J/kg]

m = 124652.5 J/358080 J/kg

m = 0.3481 kg

m = 348.1 g

m ≅ 348 g

So, the minimum amount of ice to be added is 348 g.

Answer:

Data Rate Signaling

Answer:

maybe take a really common toy kids play with or often see, find the average height for the toy and do the math to see how many of those toys stacked ontop of eachother would make up 2000 feet. For example (this isn't accurate btw just an idea of what it would sound like but) "Have you ever seen a barbie doll? well if you stack 400 barbie dolls ontop of their head it would be equal to 2000 feet."

Explanation:

sometimes taking common or beloved objects children have into your examples makes them have a better image of how small or how big something is.

Answer:

80% of the people that were killed weren't wearing a safety flotation device ( in correct terminology Personal Flotation Device, or PFD )

Explanation:

Hence they drowned due to the lack of safety.

The condition present in over 80% of paddling fatalities is that the victims were said to be not wearing a personal flotation device (PFD).

The act of paddling is known to be a sport or something one can do for fun or for games.

Conclusively, a lot of paddling fatalities 1995-2000 was due to the fact that the people who were engage in the sport or act were not putting on  a personal flotation device (PFD) and this can lead to death or drowning.

Learn more about  paddling fatalities from

https://brainly.com/question/3787626

Answer:

Explanation:

Be bop

Answer:

X = 1 (1st digit in the code)

Y = 0 (2nd digit)

Z = 4 (3rd multiplier digit)

104 → 10 × 10^4 Ω

→ 10 × 10000Ω

→ 100 kΩ

resistors are marked 104, 105, 205, 751, and 754. The resistor marked with 104 should be 100kΩ (10x10^4), 105 would be 1MΩ (10x10^5), and 205 is 2MΩ (20x10^5). 751 is 750Ω (75x10^1), and 754 is 750kΩ (75x10^4).

Here we need to understand how a code in a resistor gives us information on the resistor. Here we will see that the code means that the resistance is 100,000 Ω.

When we use numbers, let's assume that we have 3 single-digit numbers abc.

So if the code in our resistor is abc, this will mean that the resistance of the resistor is:

ab×10^c Ω

Using this general rule we can see that if the code is 104, then the resistance will be:

r = 10×10^4 Ω

 = 100,000 Ω

Then we can conclude that the resistive value of this resistor is  100,000 Ω

If you want to learn more, you can read:

https://brainly.com/question/74415

Answer:

[tex]T_2=315.69k[/tex]

Explanation:

Initial Temperature [tex]T_1=500K[/tex]

Initial Pressure [tex]P_1=1000kPa[/tex]

Final Pressure [tex]P_2=200kPa[/tex]

Generally the gas equation is mathematically given by

[tex]\frac{T_2}{T_1}=\frac{P_2}{P_1}^{\frac{n-1}{n}}[/tex]

Where

n for [tex]CO=1.4[/tex]

Therefore

[tex]\frac{T_2}{500}=\frac{200}{1000}^{\frac{1.4-1}{1.4}}[/tex]

[tex]T_2=315.69k[/tex]

Complete question:

A steel component with a tensile strength of 800 MPa and fracture toughness Kic=20 MPa Nm is known to contain internal cracks (also called tunnel cracks) with the maximum length of 1.4 mm. This steel is being considered for use in a cyclic loading application for which the designed stresses vary from 0 to 420 MPa. Would you recommend using this steel in this application?

a. Not sure. Because cyclic loading is applied. Fatigue test is needed in order to make the recommendation.

b. Yes, this because the tensile strength of steel is much higher than the applied highest stress of 420 MPa.

c. Yes, this because the calculated critical stress to fracture for the cracks is higher than the highest applied stress of 420 MPa and the steel can withstand the stress of 420 MPa.

d. No. Although the calculated critical stress to fracture for the cracks is slightly higher than the highest applied stress of 420 MPa and the steel may withstand the static stress of 420 MPa, the cyclic loading may cause rapid fatigue fracture.

Answer:

A. Not sure. Because cyclic loading is applied. Fatigue test is needed in order to make the recommendation.

Explanation:

we are not sure if to recommend this alloy for this application given that this material has already been left to experience fatigue degradation. the cyclic load application brings about a growth in the crack. We know that cyclic loading is continuous loading that is useful for the testing of fatigue. Therefore the answer to this question is option a. We cannot make recommendations except fatigue testing has been carried out.

thank you!

Answer:

Explanation:

Minerals and rocks are the same. Aggregates of minerals form rocks. Minerals determine the texture of a rock. Most rocks are made of a single mineral type.

Answer:

Check it out here

Explanation:

Answer:

  5.9 watts

Explanation:

The secondary voltage is the primary voltage multiplied by the turns ratio:

  (120 V)(41) = 4920 V

The power is the product of voltage and current:

  (4920 V)(1.2·10^-3 A) = (4.92)(1.2) W = 5.904 W

The power consumed is about 5.9 watts.

Given :

Power, P = 20 kW

Speed, N = 430 rpm

Allowable shear stress, τ = 65 MPa

Torque in the shaft is given by :

[tex]$P=\frac{2 \pi NT}{60}$[/tex]

[tex]$T=\frac{60 \times 20 \times 10^3}{2 \pi \times 430}$[/tex]

T = 444.37 N.m

Diameter of the solid shaft is

[tex]$d=\sqrt[3]{\frac{16 T}{\pi \tau}}[/tex]

[tex]$d=\sqrt[3]{\frac{16 \times 444.37}{3.14 \times 65}}[/tex]

[tex]$d=\sqrt[3]{34.83} $[/tex]

d = 3.265 m

d = 326.5 mm

Internal diameter of the hollow shaft is :

[tex]$\frac{T}{\frac{\pi}{32} \left( d_0^4 - d_i^4 \right)}=\frac{\tau}{d_0/2}$[/tex]

[tex]$\frac{444.37}{\frac{3.14}{32} \left( 0.036^4 - d_i^4 \right)}=\frac{65 \times 10^6}{0.036/2}$[/tex]

[tex]$\frac{444.37}{0.09 \left( 1.6 \times 10^{-6} - d_i^4 \right)}=\frac{65 \times 10^6}{0.018}$[/tex]

[tex]$\frac{7.99}{ \left( 1.6 \times 10^{-6} - d_i^4 \right)}=5850000$[/tex]

[tex]$1.3\times 10^{-6} = 1.6 \times 10^{-6} - d_i^4 \right)}$[/tex]

[tex]$d_i^4=300000$[/tex]

[tex]$d_i = 23.40$[/tex] mm

Percentage savings in the weight is given by :

Percentage saving = [tex]$\frac{W_{solid}-W_{hollow}}{W_{solid}}\times100$[/tex]

                                 [tex]$=\frac{V_{solid}-V_{hollow}}{V_{solid}}\times100$[/tex]

                                 [tex]$=\frac{d^2 - (d_0^2 - d_i^2)}{d^2} \times 100$[/tex]

                               [tex]$=\frac{(326.5)^2 - (0.036^2 - (32.40)^2)}{(326.5)^2} \times 100$[/tex]

                                 [tex]$=\frac{106602 - \left(1.29 \times 10^{-3} - 1049.76 \right)}{106602} \times 100$[/tex]

                                  [tex]$=\frac{106602 - 1049 }{106602} \times 100$[/tex]

                                  [tex]$=\frac{105553 }{106602} \times 100$[/tex]

                                  = 99.01 %

Answer:

The main sections included in the bill of quantities are Form of Tender, Information, Requirements, Pricing schedule, Provisional sums, and Day works.

Answer:

i really font onow why tbh eot you