Answer:
For example, the toes are anterior to the heel, and the popliteus is posterior to the patella. Superior and inferior, which describe a position above (superior) or below (inferior) another part of the body. For example, the orbits are superior to the oris, and the pelvis is inferior to the abdomen.
Explanation:
A biker first accelerates from 0.0 m/s to 6.0 m/s in 6 s, then continues at this speed for 5 s. What is the total distance traveled by the biker?
100 m
80 m
30 m
48 m
PLZ heeeeelp
Answer:
48m
Explanation:
Given the following data;
Initial velocity = 0m/s
Final velocity = 6m/s
Time, t = 6 secs
Time, T2 = 5 secs
Mathematically, acceleration is given by the equation;
[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]
Substituting into the equation;
[tex]a = \frac{6 - 0}{6}[/tex]
[tex]a = \frac{6}{6}[/tex]
Acceleration, a = 1m/s²
To find the distance covered in the first phase;
Solving for distance, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Substituting the values into the equation;
[tex] S = 0(6) + \frac {1}{2}*1*(6)^{2}[/tex]
[tex] S = 0 + \frac {1}{2}*1*36[/tex]
[tex] S = 0.5 *36[/tex]
Distance, S1 = 18m
For the second phase, time T2 = 5 secs;
Mathematically, speed is given by the equation;
[tex]Speed = \frac{distance}{time}[/tex]
Making distance the subject of formula, we have;
[tex]Distance, S = speed * time[/tex]
Substituting into the above equation;
[tex]Distance, S = 6 * 5[/tex]
Distance, S2 = 30m
Total distance = S1 + S2 = 18m + 30m = 48m
Total distance = 48m
Therefore, the total distance traveled by the biker is 48m.
Sean, whose mass is 60 kg, is riding on a 5.0 kg sled initially traveling at 8.0 m/s. He brakes the sled with a constant force, bringing it to a stop in 4.0 s. What force does he apply?
Answer:
130NExplanation:
according to Newtons second law;
F = ma
F = m(v-u)/t
m is the mass = 60+5 = 65kg
v is the final velocity = 0m/s
initial velocity = 8m/s
time t = 4.0s
F = 65(8)/4
F = 65*2
F = 130N
Hence he applied a force of 130N
If the jet is moving at a speed of 1140 km/h at the lowest point of the loop, determine the minimum radius of the circle so that the centripetal acceleration at the lowest point does not exceed 6.0 g's.
Answer:
The radius is [tex]r =1705.44 \ m[/tex]
Explanation:
From the question we are told that
The speed is [tex]v = 1140 \ km /h = \frac{1140 * 1000}{3600} = 316.67 \ m/s[/tex]
The centripetal acceleration is [tex]a = 6 g's = 6 * 9.8 = 58.8 \ m/s^2[/tex]
Generally the centripetal force acting on the jet is mathematically represented as
[tex]F_c = \frac{m * v^2 }{r}[/tex]
Generally this centripetal force is equal to the net force acting which according to Newton's third law is mathematically represented as
[tex]F = m * a[/tex]
So
[tex]\frac{m * v^2 }{r} = ma[/tex]
=> [tex]\frac{ v^2 }{r} = a[/tex]
=> [tex]r = \frac{v^2}{a}[/tex]
=> [tex]r = \frac{316.67^2}{58.8}[/tex]
=> [tex]r =1705.44 \ m[/tex]
pls answer this
quick as possible
Answer:
The answer is the 4th one
Explanation:
Good luck man
Explain the "war of the currents"
Answer:
the war of currents is
Explanation:
The war of currents was a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s.
Answer:
a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s
Explanation:
A ball is thrown straight up from the ground with an unknown velocity. It reaches its highest point after 5.5 s. With what velocity did it leave the ground?
ANALOGY, Metal ions: buoys, as electrons: _____.
a. water
b. other buoys
c. boats
d. sand
Answer:
a. water
Explanation:
A buoy is a floating object that is used in the sea to locate some point or as a checkpoint. It stays at its designated position in the sea by means of an anchor chain. This chain is made short in length according to the water depth do the buoy can not deviate much from its position. The same mechanism can be applied to the metal ion. When a metal ion is formed it remains at its place, but the electrons are mobile and they travel when they get a medium. For example in circuits or from one atom to other. And for the case of buoy, the water serves as electrons as the water is moving in the medium. Hence, the second analogy will be:
electrons : water
So, the correct option is:
a. water
Answer:
A. Water
Explanation:
What is precipitation and how does it affect weather? (20 points)
Answer:
precipitation is any frozen or liquid that forms in the atmosphere and falls back to Earth in the form of rain, hail, snow, or sleet.
Explanation:
precipitation can give an excessive amount of rainfall which will result in freezing crops andcold temperatures
Please help with this physics question
The correct answer is A continúe moving with constant velocity
It will be easier to lift a load in wheel barrow if the load is moved
towards the wheel.why
Answer:
the moment
Explanation:
the shorter the distance from the force, the lesser the torque acting on it
Bicyclist travels at an average velocity of 11.2 km/h [W]. How far will the bicyclist travel in 175 minutes?
Answer:
32.67km
Explanation:
~= round off
11.2km/h~3.11m/s
175minutes=10500s
10500*3.11~32, 666.67m
=32.66667km
~ 32.67km
Based on the measured force between objects that are 10 meters apart, how can you find the force between objects that are any distance apart ?
Answer:
F' = 100 F/r²
Explanation:
The gravitational force of attraction between two objects is given by the Newton's Gravitational Formula. The Newton's Gravitational Formula is as follows:
F = Gm₁m₂/r²
where,
F = Force between objects
G = Universal Gravitational Constant
m₁ = mass of first object
m₂ = mass of second object
r = distance between objects = 10 m
Therefore,
F = Gm₁m₂/10²
Gm₁m₂ = 100F --------------------- equation (1)
Now, we consider these objects at any distance r apart. So, the force becomes:
F' = Gm₁m₂/r²
using equation (1), we get:
F' = 100 F/r²
So, if the force (F) between objects 10 m apart is known, we can find it at any distance from the above formula.
The force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]
According to the gravitational law, the force acting on an object is directly proportional to the product of their masses and inversely proportional to the square of their distance apart. Mathematically,
[tex]P=\frac{GMm}{r^2}[/tex]
M and m are the masses
r is the distance between the masses
If the force between objects that are 10 meters apart, hence;
[tex]P=\frac{GMm}{10^2}\\P=\frac{GMm}{100}\\GMm = 100P[/tex]
To find the force between objects that are any distance apart, we will use the same formula above to have;
[tex]P'=\frac{GMm}{r^2}\\[/tex]
Substitute the result above into the expression to have:
[tex]P'=\frac{100P}{r^2}[/tex]
Hence the force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]
Learn more on gravitational law here: https://brainly.com/question/11760568
help please it's worth a huge part of my grade!!
Answer:
i cant see it
Explanation:
sorry maybe try to show us a different way?
HELP ASAP!!!!!!!!!
Mark and Steven were conducting an investigation where they were measuring the energy of a glass marble as it rolled down a ramp. According to their calculations, the total energy of the marble decreased. Which statement below is the best explanation for the decrease in total energy?
A) It decreased because it was destroyed by the interaction with the ramp
B) The total energy always decreases in an energy conversion
C) They were incorrect; the energy totals should have been the same
D) The energy decreased because heat resulted from friction between the marble and the ramp
a neutral comb brushes
Dr. Metallica wants to change the property of an alloy? How could she do this? SELECT ALL THAT APPLY.
A. She could heat the alloy enough that it is malleable.
B. She could change the metal(s) used in the alloy.
C. She could change the nonmetal(s) used in the alloy.
D. She could change the percentages of the elements used in the alloy.
Answer:
METALLICA = HOT BAND
Explanation:
The answer is a, you're welcome babes
Answer: A B D
Explanation:
The Amazon rainforest has millions of trees down in South America. Pantanal, the largest wetland, or swamp, on Earth sits directly below the Amazon on a map. Explain this phenomenon using processes from the water cycle.
The subject is science just to let you know.
Answer:The Pantanal is, when the season changes of the river flow, the pantanal shrinks after a few river channels The amazon rainforest has a lot of trees.The vapor rises and condenses it into clouds.Water leaves the forest and comes back, the amazon leaves itself.If the amazon water was not to go by itself everything would be different.
Answer:
Nine, Brazil, Venezuela
Explanation:
what is a factor that scientists use to classify orders of soil?
Plzzz helppppp!!! I need answers A, B, C & D
Answer: the answer i for c is yes 0& 10
Explanation:
how can voltage be produced by magnetism and motion?
Answer:
Electromagnetic Induction by a Moving Magnet
Then the action of moving a coil or loop of wire through a magnetic field induces a voltage in the coil with the magnitude of this induced voltage being proportional to the speed or velocity of the movement.
Explanation:
A box with weight of magnitude F_G = 2.00 N is lowered by a rope down a smooth plane that is inclined at an angle φ = 30.0 degrees about ve the horizontal. The normal force acting on the box has a magnitude n = 1.73 N, the tension force is 1.00 N, and the displacement Δr of the box is 1.80 m down the cloned plane.
What is the work W_G done on the box by the gravity?
Answer:
1.8 J
Explanation:
I had this exact question today and found someone who had solved it before, this was their response to the work done by gravity. They used the name "physicsmom"
Vertical distance = 1.8 sin 30 = .9 m
W = 2 N * .9 m = 1.8J
Good luck! I hope this helps!
The work done on the box by the gravity is 0.072 J.
The given parameters;
weight of the box, [tex]F_g[/tex] = 2 Ninclination of the rope, φ = 30⁰normal force acting on the box, n = 1.73 Ntension on the rope, T = 1 Ndisplacement of the box, Δr = 1.8 mThe work done on the box by gravity is calculated as follows;
W = FΔr
where;
F is the net horizontal force on the block
The net horizontal force on the box is calculated as follows;
[tex]\Sigma F_x = F_g sin(\theta ) - F_k\\\\ \Sigma F_x = F_g sin(\theta ) - \mu_k F_n \\\\ \Sigma F_x = 2 \times sin(30 ) - (tan \theta) \times F_n\\\\ \Sigma F_x = 1 - (tan\ 30) \times 1.73\\\\ \Sigma F_x = 0.04 \ N[/tex]
The work done on the box by gravity is calculated as;
W = 0.04 x 1.8
W = 0.072 J.
Thus, the work done on the box by the gravity is 0.072 J.
Learn more here: https://brainly.com/question/14945453
How much tension must a rope withstand if it is used to accelerate a 1200-kg car vertically upwards at 0.8m/s2?
Answer:
T = 12732 [N]
Explanation:
To solve this problem we must use newton's second law which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
By means of the attached free body diagram, we can better understand the solution to this problem.
As we see in the diagram the tension Force T lifts the car upwards so the movement is upwards. Therefore we have two forces one upward (positive) of the force T and the other negative downward due to the weight of the vehicle.
As the movement is up the acceleration is also up (with a positive sign).
ΣF = m*a
where:
F = forces [N] (units of Newtons)
m = mass = 1200 [kg]
a = acceleration = 0.8 [m/s²]
T - 1200*9.81 = 1200*(0.8)
T = 12732 [N]
Answer:
12,720
Explanation:
The first group of planets that are made of rock and closest to the sun
Answer:
A terrestrial planet, telluric planet, or rocky planet is a planet that is composed primarily of silicate rocks or metals. Within the Solar System, the terrestrial planets are the inner planets closest to the Sun
Walking down a pebble beach becomes less painful as you enter the sea. Explain why.
Answer:Since pressure = force/area, the same force on a smaller area means more pressure. When you are walking on sand, the force being applied by your body is spread out over the entire surface of your foot. ... So, more pressure applied on a given area of your foot causes more pain.
Explanation:
Good Question
Some examples from everyday life of thermal radiators include:______.A. Humans.B. The Sun.C. Incandescent light bulbs.D. Lasers.E. Accelerating electrons.
Answer: A. Humans B. The sun C. Incandescent light bulbs
Explanation:
Thermal radiators are simply referred to as the heat exchangers that are designed in order to transfer thermal energy from one particular place to another.
Some examples from everyday life of thermal radiators include humans, the Sun and incandescent light bulbs. All these help in transfer of hear from one medium to another medium
Rosa eats a peanut butter sandwich for lunch. Peanut butter contains a lot
of protein, and bread is mostly starch. Rosa plans to go for a run later this
afternoon. Rosa is breathing normally.
When a balloon is rubbed on a surface and then touched to hair it will attract the hair, causing it to stick to the balloon. Explain why this happens.
Answer:
electricity
Explanation:
Answer:
This is called static electricity
Explanation:
The reasoning behind this is because the negative electrons in your hair are being transferred to the balloon, then when the balloon is removed it pulls on the hair with an attractive electric force.
What is a young lady in a binkini I pictures help me understand the must :)
Uhhh.. creep. Can you like..not?
Answer: Lol what the heck I never heard this type of question. but I mean you see it when you go to the beach so yeah that's all I'm telling you U-U
how is life determined on math
Answer:
you can use math as a banker, a doctor, a scientist, the president probably uses math, you use math to see how much less juice you gave your sibling, and you can use math to help in collage! (sorry if its wrong tell me if it is)
Answer: Isn't it because we use it daily especially with financial needs, scientific research, and the way people even use it to cook
Explanation: Therefore everything, especially in physics where you determine what density, distance, and equations following the scientific research.
Which form of energy has the most potential globally
a) Solar energy
b) Bio energy
c) Wind energy
d) Geothermal energy
Answer:
i think the answer is solar,
Explanation:
because it is a natural resource im sorry if im wrong
