Which physical phenomenon is illustrated by the fact that the prism has different refractive indices for different colors

Answer:

just need some focus

Explanation:

tan 13. The speed of a horse is 134 meters per second how long does it take to travel a distance of 19,311m? M+ tud V 134 14. You are walking down the block and see your neighbor's pitbull 30 meters away, out of the fence, starring at you. Suddenly, he starts running towards you at 20m/s. How long will it be before you're the pitbull's lunch?  V 15. A pendulum has a frequency of 2 Hz what is it's period. T = 1/2 16. You have just finished a 1600 mile trip, and it took you 16 hours. What was your average speed V = Ad At 17. You are flying from New York, NY to SanFrancisco California, a distance of 2582 miles, it takes 6.33hrs to complete the flight what was your average speed? give answer in m/s. V = Ad = At 3 of 6

Answer:

D newton third law

Explanation:

good luck

One of the two requirements of electric current is there must be an electric potential between two bodies

For electric current to flow, there must be an electric potential between two bodies.

This is because electric charge flows from a higher electric potential to a lower electric potential just as, water flows from a higher gravitational potential to a lower gravitational potential.

The difference between the electric potential between the two bodies causes the electric charge to flow between the two bodies.

This flow of electric charge constitutes electric current and electric current will only flow when there is an electric potential between two bodies.

So, one of the two requirements of electric current is there must be an electric potential between two bodies.

So, the answer is A

Learn more about electric current here:

https://brainly.com/question/13562393

Answer:

[tex]F=133N[/tex]

Explanation:

From the question we are told that:

Length [tex]l=3.0m[/tex]

Mass [tex]m=24kg[/tex]

Distance from Tip [tex]d=35cm[/tex]

Generally, the equation for Torque Balance is mathematically given by

[tex]mg(l/2)=F(l-d)[/tex]

[tex]2*9.81(3/2)=F(3-35*10^-2)[/tex]

Therefore

[tex]F=133N[/tex]

Answer:

true

Explanation:

forces require an agent

you should always be able to identify what (the agent) is producing the force

Answer: (d)

Explanation:

Given

15 W is equivalent to 60 W light that is, it save 45 W

So, for 4 hours it is, [tex]4\times 45=180\ W.hr[/tex]

For 30 days, it becomes

[tex]\Rightarrow 180\times 30=5400\ W.hr\\\Rightarrow 5.4\ kWh[/tex]

Thus, [tex]5.4\ kWh[/tex] is saved in 30 days

option (d) is correct.

Explanation:

Those tools that helps to make our work easier ,faster and more convenient in our daily life it is called simple Machine.

Answer:

Because it is the result of two more fundamental units, a derived unit is termed that. For volume, the cubic meter (m³) is the fundamental unit of area. Any number that cannot be measured directly with any equipment is referred to as a derived unit. For example, we can't quantify a substance's density using a rule, scale, or bucket.

OAmalOHopeO

Answer:

I = 15,645. kg*m/s or 15,645 N*s

Explanation:

I = m(^v)

I = 1050kg((26.2m/s-11.3m/s)

I = 15,645. kg*m/s

Answer:

The total length of wire is 0.24 m.

Explanation:

Number of turns, N = 270

magnetic field, B = 0.48 T

frequency, f = 60 Hz

rms value of emf = 120 V

maximum value of emf, Vo = 1.414 x 120 = 169.68 V

let the area of square is A and the side is L.

The maximum emf is given by

Vo = N B A w

169.68 = 270 x 0.48 x A x 2 x 3.14 x 60

A = 3.5 x 10^-3 m^2

So,

L = 0.0589 m

Total length of wire, P = 4 L = 4 x 0.0589 = 0.24 m

Answer:

Level 1-

1. It depends of the sense and the magnitude of the force

2. Electric force

3. A contact force need to touch to act in the object, like push a box for example. A non-contact force don't need to touch to act in the object, like an magnet attracting other magnet

4. The pressure is the force divided by the area. The unit for pressure in the international system is Pascal

5. Because the pressure is applied in all the surface of our bodies, so the force is divided by the surface area of our bodies.

Level 2-

1. The balloons stick to the walls because when she rubbed they in her clothes they earned eletric charge, and when they touched the wall, the electric charges of the wall got polarized and it creats a attraction force.

The same happened with the water stream. The balloons were charged with electric charges and the water was attracted by it.

2. Mass is the amount of matter, it's an scalar quantity. Weight is the force created by the attraction of a massive body as the Earth, and another body as a human, and a force is a vector

3. It's for increase the surface area, so the pressure will be decreased

4. When a person pulls up the syringe plunger the pressure inside the syringe is smaller than the pressure outside, so the pressure push the liquid into the syringe

5. a) The stream of the top is falling closer than the stream from the bottom, causa in the top the pressure is lower than in the bottom. In the bottom, beyond the air pressure, it has also the whole column of water making more pressure, so it goes far.

b) The streams are all near because the holes are in the same height, so the pressure is divided for all the holes.

Level 3-

1. The girl.

pressure of the girl: 50/1 = 50

pressure of the man: 100/25 = 4

pressure of the elephant: 4500/250 = 18

So, the girl exerts more pressure.

2. When the can is heated the air inside expands and get out of it. If you seal the mouth of the can, the air cannot return to inside it, and when it get colder the air inside will shrink back to the normal volume, so it will occupy less space and the outside pressure will exerts a force and deform the can.

Answer:

simultaneously

Time taken to reach the ground depends on the vertical component of velocity, not horizontal component of velocity.

Answer:

B 5s

Explanation:

Because of the Displacement in the nth second of the free fall is 

Snth=21g(t12−t22)

Given that (tn−tn−1)=1

Displacement in 3 seconds of the free fall 

S=21gt2

S=21×10×32

S=45m

Given that: Snth=45

On solving that we get:

t1=5sec

Answer:

tables, charts and graphs

Explanation:

Answer:

"the ratio of increase in the volume of a solid per degree rise of temperature to its initial volume" -web

Explanation:

tbh up above ✅

Answer:

cubic meter

Explanation:

Increase in volume of a body on heating is referred to as volumetric expansion or cubical expansion

Answer:

The torque decreases because as the hanging mass goes down, the moment arm about the pivot point decreases. Since the torque is directly proportional to the length of the moment arm, torque decreases.

The torque decreases because as the hanging mass goes down, the moment arm about the pivot point decreases. Since the torque is directly proportional to the length of the moment arm, torque decreases.

Atomic number of an element  is defined as total number of protons present in the nucleus,  neutrons carry no net electrical charge, so it is the charge number of the nucleus.

atomic mass of an element can be defined as the atomic weight is measured total mass of an element’s atom, the total number of neutrons and protons in the nucleus of an atom.

Both Atomic mass and an atomic number of elements are closely related if  atomic number is high, then the atomic mass is also said to be high.

For more details regarding fire mass , visit

brainly.com/question/16858932

#SPJ2

Answer:

Explanation:

F = ma

F = (10)(3)

F = 30 N

Answer:

[tex]\boxed {\boxed {\sf 30 \ Newtons}}[/tex]

Explanation:

We are asked to find the applied net force. According to Newton's Second of Law, force is the product of mass and acceleration.

[tex]F= m \times a[/tex]

The object has a mass of 10 kilograms and it is accelerating at 3 meters per second squared.

Substitute the known values into the formula.

[tex]F= 10 \ kg \times 3 \ m/s ^2[/tex]

Multiply.

[tex]F= 30 \ kg \times m/s^2[/tex]

1 kilogram meter per second squared is equal to 1 Newton, so our answer of 30 kg × m/s² is equal to 30 N.

[tex]F= 30 \ N[/tex]

The applied net force is 30 Newtons.

Answer:

a)   R₁ = 14.1 Ω,   b)  R₂ =  19.9 Ω

Explanation:

For this exercise we must use ohm's law remembering that in a series circuit the equivalent resistance is the sum of the resistances

all resistors connected

           V = i (R₁ + R₂)

with R₁ connected

           V = (i + 0.5) R₁

with R₂ connected

           V = (i + 0.25) R₂

We have a system of three equations with three unknowns for which we can solve it

We substitute the last two equations in the first

           V = i ( [tex]\frac{V}{ i+0.5} + \frac{V}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{1}{i+0.5} + \frac{1}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{i+0.5+i+0.25}{(i+0.5) \ ( i+0.25) }[/tex] ) =  [tex]\frac{i^2 + 0.75i}{i^2 + 0.75 i + 0.125}[/tex]

           i² + 0.75 i + 0.125 = 2i² + 0.75 i

           i² - 0.125 = 0

           i = √0.125

           i = 0.35355 A

with the second equation we look for R1

          R₁ = [tex]\frac{V}{i+0.5}[/tex]

          R₁ = 12 /( 0.35355 +0.5)

          R₁ = 14.1 Ω

with the third equation we look for R2

          R₂ = [tex]\frac{V}{i+0.25}[/tex]

          R₂ =[tex]\frac{12}{0.35355+0.25}[/tex]

          R₂ =  19.9 Ω

Answer:

Both will have the same momentum.

P = M v     momentum

v = a t   for uniform acceleration

P = M a t

But a = F / M

P = M (F / M) t = F t    so both have the same momentum

The question is incomplete. The complete question is :

A dielectric-filled parallel-plate capacitor has plate area A = 10.0 cm2 , plate separation d = 10.0 mm and dielectric constant k = 3.00. The capacitor is connected to a battery that creates a constant voltage V = 15.0 V . Throughout the problem, use ϵ0 = 8.85×10−12 C2/N⋅m2 .

Find the energy U1 of the dielectric-filled capacitor. I got U1=2.99*10^-10 J which I know is correct. Now I need these:

1. The dielectric plate is now slowly pulled out of the capacitor, which remains connected to the battery. Find the energy U2 of the capacitor at the moment when the capacitor is half-filled with the dielectric.

2. The capacitor is now disconnected from the battery, and the dielectric plate is slowly removed the rest of the way out of the capacitor. Find the new energy of the capacitor, U3.

Solution :

Given :

[tex]A = 10 \ cm^2[/tex]

   [tex]$=0.0010 \ m^2$[/tex]

d = 10 mm

  = 0.010 m

Then, Capacitance,

[tex]$C=\frac{k \epsilon_0 A}{d}$[/tex]

[tex]$C=\frac{8.85 \times 10^{12} \times 3 \times 0.0010}{0.010}$[/tex]

[tex]$C=2.655 \times 10^{12} \ F$[/tex]

[tex]$U_1 = \frac{1}{2}CV^2$[/tex]

[tex]$U_1 = \frac{1}{2} \times 2.655 \times 10^{-12} \times (15V)^2$[/tex]

[tex]$U_1=2.987 \times 10^{-10}\ J$[/tex]

Now,

[tex]$C_k=\frac{1}{2} \frac{k \epsilon_0}{d} \times \frac{A}{2}$[/tex]

And

[tex]$C_{air}=\frac{1}{2} \frac{\epsilon_0}{d} \times \frac{A}{2}$[/tex]

In parallel combination,

[tex]$C_{eq}= C_k + C_{air}$[/tex]

[tex]$C_{eq} = \frac{1}{2} \frac{\epsilon_0 A}{d}(1+k)$[/tex]

[tex]$C_{eq} = \frac{1}{2} \times \frac{8.85 \times 10^{-12} \times 0.0010}{0.01} \times (1+3)$[/tex]

[tex]$C_{eq} = 1.77 \times 10^{-12}\ F$[/tex]

Then energy,

[tex]$U_2 =\frac{1}{2} C_{eq} V^2$[/tex]

[tex]$U_2=\frac{1}{2} \times 1.77 \times 10^{-12} \times (15V)^2$[/tex]

[tex]$U_2=1.99 \times 10^{-10} \ J$[/tex]

b). Now the charge on the [tex]\text{capacitor}[/tex] is :

[tex]$Q=C_{eq} V$[/tex]

[tex]$Q = 1.77 \times 10^{-12} \times 15 V$[/tex]

[tex]$Q = 26.55 \times 10^{-12} \ C$[/tex]

Now when the capacitor gets disconnected from battery and the [tex]\text{dielectric}[/tex] is slowly [tex]\text{removed the rest}[/tex] of the way out of the [tex]\text{capacitor}[/tex] is :

[tex]$C_3=\frac{A \epsilon_0}{d}$[/tex]

[tex]$C_3 = \frac{0.0010 \times 8.85 \times 10^{-12}}{0.01}$[/tex]

[tex]$C_3=0.885 \times 10^{-12} \ F$[/tex]

[tex]$C_3 = 0.885 \times 10^{-12} \ F$[/tex]

Without the dielectric,

[tex]$U_3=\frac{1}{2} \frac{Q^2}{C}$[/tex]

[tex]$U_3=\frac{1}{2} \times \frac{(25.55 \times 10^{-12})^2}{0.885 \times 10^{-12}}$[/tex]

[tex]$U_3=3.98 \times 10^{-10} \ J$[/tex]

The value of the acceleration is a = 0.5 m/s². The position at 80 s is x = 3200 m and finally the average velocity is v = 40 m/s.

Acceleration:

We can use the fallowing kinematic equation to get the acceleration at 80 s.

[tex]a=\frac{v_{f}-v_{i}}{t}[/tex]            

Where:

The, we have:

[tex]\vec{a}=\frac{60-20}{80}[/tex]

[tex]\vec{a}=0.5\: m/s^{2}[/tex]

Position:

Knowing the acceleration we can find the position using the falling equation.

[tex]\vec{x}=v_{i}t+0.5at^{2}[/tex]

[tex]\vec{x}=20*80+0.5*0.5*80^{2}[/tex]

[tex]\vec{x}=3200 m[/tex]

Average velocity:

The definition of the average velocity is:

[tex]\vec{v}=\frac{\Delta x}{t}[/tex]

[tex]\vec{v}=\frac{x_{f}-x_{i}}{t}[/tex]

[tex]\vec{v}=\frac{3200-0}{80}[/tex]

[tex]\vec{v}=40\: m/s[/tex]

Learn more about the kinematic equations here:

https://brainly.com/question/13143668

I hope it helps you!

Explanation:

Energy utilization focuses on technologies that can lead to new and potentially more efficient ways of using electricity in residential, commercial and industrial settings—as well as in the transportation sector

Answer:

(A) Gravity is you're answer.

Explanation:

When an object or human is falling at an increased rate, The force of gravity is taking place.

9514 1404 393

Answer:

  1.114 kg/m³

Explanation:

The total mass of the air in the balloon and the balloon + cargo will be the mass of the displaced air. If d is the density of the air in the balloon, then we have ...

  2910d +308 = 2910×1.22

Solving for d, we find ...

  2910d = 2919(1.22) -308

  d = 1.22 -308/2910

  d ≈ 1.114 . . . kg/m³

The density of the hot air is about 1.114 kg/m³.

Answer:

a) 91 m/s

b) 111 m/s

Explanation:

v = u + at

v = 128sin60 + (-9.8)(2.0) = 91.25125... m/s

v = √(vx² + vy²) = √((128cos60)² + 91.25125²) = 111.4575... m/s

Answer:

The results of the experiment indicated a shift consistent with zero, and certainly less than a twentieth of the shift expected if the Earth's velocity in orbit around the sun was the same as its velocity through the ether.

Explanation:

Answer:

B. Increases.

Explanation:

[tex]{ \bf{F = \frac{m {v}^{2} }{r} }} \\ { \bf{F \: \alpha \: {v}^{2} }}[/tex]

Keeping mass, and radius constant, speed or velocity is directly proportioanal to centripetal force.

,In order to increase the speed of an object on a circular path, YOU have to increase the centripetal force acting on it.

Answer:

wegkwe fhkrbhefdb

Explanation:B

Answer:

şen çal kapimi turkish drama