Which option draws the correct conclusion from the following case study?
A patient with sickle-cell anemia and a fever goes to the emergency room and is given Tylenol to reduce
the fever. The patient has seizures and dies after taking the Tylenol. The physician writes up this case as
an interesting outcome for a patient with sickle-cell anemia.
The case study's validity is obvious because it describes a real-life situation.
The case study was influenced by bias, and led to incorrect conclusions being drawn
The case study was not intended to produce a generalized conclusion about treatment
Upon reading this case study, physicians should stop treating sickle cell patients with fevers using Tylenol

Answer:

ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 )

Explanation:

Isomers are compounds that have the same molecular formula but different structural formulas. Hence any pair of compounds that can be represented by exactly the same molecular formula are isomers of each other.

If we look at the pair of compounds; ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 ), one compound has molecular formula, C2H7ON while the other has a molecular formula, C2H5ON, hence they are not isomers of each other.

Answer:

5.92 g

Explanation:

Convert milliliters to liters.

217 mL = 0.217 L

Since molarity (M) is moles per liter(mol/L), multiply the molarity by the volume to find out how many moles you will need.

0.217 L × 0.246 M = 0.05338 mol

Now, convert the moles to grams using the molar mass.  The molar mass of calcium chloride is 110.98 g/mol.

0.05338 mol × 110.98 g/mol = 5.924 g ≈ 5.92 g

You will need 5.92 g of calcium chloride.

Answer:

False

Explanation:

The reaction rate increases if the temperature also increases, as does the concentration of ractives or the presence of catalysts.

The reaction rate talks about how reagents are converted into products as a function of time, this process can take less or more depending on the factors to which the reaction is exposed.

The increasing temperature generates an increase in the kinetic energy of the particles, promoting their proximity and their reaction between them to be able to give the final product, so a faster reaction occurs, which is why it has promoted when the particles collide.

Answer:

Explanation:

a) 4-nitrobenzoic acid         pKa= 3.41

    benzoic acid                   pKa= 4.19

    4-chlorobenzoic acid     pKa= 3.98

b) benzoic acid                    pKa= 4.19    

   cyclohexanol                   pKa= 18.0

   phenol                              pKa= 9.95

c) 4-Nitrobenzoic acid             pKa= 3.41

   4-nitrophenol                       pKa= 7.15

   4-nitrophenylacetic acid     pKa= 3.85

Answer:

A. NaHCO₃

Explanation:

NaHCO₃ ⇒ NaOH + H₂CO₃

NaOH is a strong base and H₂CO₃ is a weak acid. Therefore, NaHCO₃ is a salt of a strong base-weak acid reaction. The salt is basic because carbonic acid (H₂CO₃) is a weak acid so it remains undissociated. So, there is a presence of additional OH⁻ ions that makes the solution basic.

Hope that helps.

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-

1. it can not conduct heat and electricity

2. it is netiher ductile not malleable

3. it is not lsuturous and also not sonorous

Explanation:

a nonmetal (or non-metal) is a chemical element that mostly lacks the characteristics of a metal. Physically, a nonmetal tends to have a relatively low melting point, boiling point, and density. A nonmetal is typically brittle when solid and usually has poor thermal conductivity and electrical conductivity. Chemically, nonmetals tend to have relatively high ionization energy, electron affinity, and electronegativity. They gain or share electrons when they react with other elements and chemical compounds. Seventeen elements are generally classified as nonmetals: most are gases (hydrogen, helium, nitrogen, oxygen, fluorine, neon, chlorine, argon, krypton, xenon and radon); one is a liquid (bromine); and a few are solids (carbon, phosphorus, sulfur, selenium, and iodine). Metalloids such as boron, silicon, and germanium are sometimes counted as nonmetals.

Answer:

1.49e24

Explanation:

Standars temperature and pressure are 273.15K and 1atm, respectively.

Using ideal gas law, we can find moles of an ideal gas if we know its pressure, temperature and volume as follows:

PV = nRT

PV / RT = n

Where P is pressure (1atm), V is volume (55.3L), R is gas constant (0.082atmL/molK), T is temperature (273.15K) and n moles of the ideal gas.

Replacing:

PV / RT = n

1atm*55.3L / 0.082atmL/molK*273.15K = n

2.47 moles = n

Now, the question is about the number of molecules in the jar. By definition, 1 mole = 6.022x10²³ molecules.

As we have 2.47 moles:

2.47 mol × (6.022x10²³ molecules / 1 mole) =

1.49x10²⁴ molecules that are in the jar

In scientific notation:

Answer:

a. Gly-Lys + Leu-Ala-Cys-Arg + Ala-Phe

b. Glu-Ala-Phe + Gly-Ala-Tyr

Explanation:

In this case, we have to remember which peptidic bonds can break each protease:

-) Trypsin

It breaks selectively the peptidic bond in the carbonyl group of lysine or arginine.

-) Chymotrypsin

It breaks selectively the peptidic bond in the carbonyl group of phenylalanine, tryptophan, or tyrosine.

With this in mind in "peptide a", the peptidic bonds that would be broken are the ones in the "Lis" and "Arg" (See figure 1).

In "peptide b", the peptidic bond that would be broken is the one in the "Phe" (See figure 2). The second amino acid that can be broken is tyrosine, but this amino acid is placed in the C terminal spot, therefore will not be involved in the hydrolysis.

Answer:

ΔT=[tex]0.87^{\circ}C[/tex]

Explanation:

Para esta pregunta debemos recordar la ecuación que nos permite calcular el aumento ebulliscopico (aumento del punto de ebullición):

ΔT=[tex]Kb*m[/tex]

Donde ΔT es el valor del aumento del punto de ebullición. Kb es la constante ebulloscopica para el agua ([tex]0.512\frac{Kg~^{\circ}C}{mol}[/tex]) y m es la molalidad ([tex]m=\frac{mol}{Kg~ of~ solvente}[/tex]).

Por lo tanto el primer paso es calcular la molalidad de la solución. Para lo cual tendremos que calcular las moles de sal en los 25 g. Si queremos hacer esto debemos recordar que la formula de sal de mesa es NaCl y que la masa molar de NaCl es 58.44 g/mol. Por lo tanto:

[tex]25~g~NaCl\frac{1~mol~NaCl}{58.44~g~NaCl}~=~0.42~mol~NaCl[/tex]

Ahora bien, también debemos saber los Kg de agua en la solución. Por lo que podemos usar la densidad del agua (1 g/mL) para convertir de mL a g y luego hacer la conversión a Kg:

[tex]250~mL\frac{1~g}{1~mL}\frac{1~Kg}{1000~g}~=~0.25~Kg[/tex]

Finalmente para el calculo de la molalidad podemos dividir los dos valores:

[tex]m=\frac{0.42~mol}{0.25~Kg}=1.68[/tex]

Con el valor de la molalidad se puede calcular ΔT al reemplazar los valores:

ΔT=[tex]1.68~\frac{mol}{Kg}*0.52\frac{Kg~^{\circ}C}{mol}=0.87^{\circ}C[/tex]

Si la temperatura de ebullición normal del agua es 100 ºC. Podemos calcular la temperatura final si adicionamos ΔT:

Temperatura final = 100 + 0.87 = 100.87 ºC

Espero sea de ayuda!

Answer:

5.74M or 5.74 mol/L (to 3 sign. fig.)

Explanation:

The molar mass of NaNO3 is 85g/mol, which means that:

1 mole of NaNO3 - 85g

? moles - 122.0g

= 122/85 = 1.44 moles

Concentration in mol/L = no. of moles (moles) ÷ volume (L)

[tex]\frac{1.44}{0.250}[/tex] = 5.74M or 5.74 mol/L (to 3 sign. fig.)

I hope the steps are clear and easy to follow.

Answer: Gamma Radiation

Explanation:

The emission of Gamma rays does not cause a change in both the atomic and mass number. They are  electromagnetic radiation.

The radiations that leaves without changing the atomic mass and atomic number of the particle have been gamma radiations. Thus, option D is correct.

Radiations have been the energy that has been evolved by the particles during energy transitions. The nuclear decay results with the release of the energy from the particle resulting in the change in the atomic mass.

The electromagnetic radiations have been capable of emitting the radiation without changing the mass and atomic number of the element. The gamma radiations have been the electromagnetic radiations. Thus, option D is correct.

For more information about the emissions, refer to the link:

https://brainly.com/question/517329

The compound does not undergo an aldol addition reaction in presence of aqueous sodium hydroxide is 2, 2-dimethylbutanal.

The Aldol Reaction occurs when the enolate of an aldehyde or ketone combines with the carbonyl of another molecule at the aplha-carbon under basic or acidic circumstances to produce beta-hydroxy aldehyde or ketone.

For the formation of enolate ion, compound should contain alpha hydrogen in it and among the given compound only 2, 2-dimethylbutanal will not have alpha hydrogens.

Hence 2, 2-dimethylbutanal does not undergo an aldol addition reaction.

To know more about aldol reaction, visit the below link:

https://brainly.com/question/9629936

#SPJ2

Answer:

[tex]\mathbf{S^0_{rxn} = -140.41 \ J/mol.K}[/tex]

Based upon the stoichiometry of the reaction the sign of Sºrxn should be negative

Explanation:

Consider the reaction:

H2CO(g) + O2(g) --------> CO2(g) + H2O(l)

Using standard thermodynamic data;

Based upon the stoichiometry of the reaction the sign of Sºrxn should be _________ . calculate Sºrxn at 25°C. Sºrxn = J/K•mol

At standard thermodynamic data

[tex]\mathtt{S^0_{rxn} = \sum S^0 _{product} - \sum S^0 _{reactant}}[/tex]

[tex]S^0(CO_2)[/tex] = 213.79 J/mol.K

[tex]S^0(H_2O)=[/tex]  69.95  J/mol.K

[tex]S^0 ({H_2CO}) =[/tex] 218.95 J/mol.K

[tex]S^0 (O_2)[/tex]  = 205.2 J/mol.K

[tex]\mathtt{S^0_{rxn} = (213.79 + 69.95) J/mol.K - (218.95+ 205.2) J/mol.K}[/tex]

[tex]\mathtt{S^0_{rxn} = (283.74) J/mol.K - (424.15) J/mol.K}[/tex]

[tex]\mathbf{S^0_{rxn} = -140.41 \ J/mol.K}[/tex]

Based upon the stoichiometry of the reaction the sign of Sºrxn should be negative

Answer:

Check the Attachment.

Half-reactions:

Anode: (OXIDATION) Ni --> Ni2+ + 2e-

Cathode: (REDUCTION) Cu2+ +2e- --> Cu

Overall reaction: Ni + Cu2+ --> Ni2+ + Cu

Explanation:

Overall, reaction is basically Anode + Cathode, where electrons on both sides cancel out  (if not, you need to multiply the equation in a way you can cancel them out).

Hope this helps.

Answer:

True

Explanation:

The percentage by mass of a substance in a solution can be calculated by dividing the mass of the substance dissolved in the solution by the total mass of the solution. This can be expressed mathematically as:

Percentage by mass = mass of substance in solution/mass of solution x 100

In this case;

mass of KBr = 4.34 grams

mass of water = 17.4 grams

mass of solution = mass of KBr + mass of water = 4.34 + 17.4 = 21.74

Percentage by mass of KBr = 4.34/21.74 x 100

                                              = 19.96 %

19.96 is approximately 20%.

Hence, the statement is true.

Answer: 2. Dalton Model

Explanation:

John Dalton proposed that atoms are indivisible spheres. Although his model of an atom was not entirely new to the scientific world since the ancient Greeks has made  a similar statement in the past ( all matter are made up of small indivisible particle called atom).

As of when Dalton proposed his model of an atom, electrons and nucleus where yet to be discovered.

Answer:

b. Use the periodic table to work out the charge (oxidation number) on the transition metal according to the group in the periodic table

Explanation:

The keyword in this problem us "transition metal". Transition metals are found between the group 2 and group 3 elements. They have the d sub shells and also exhibit variable oxidation numbers (valency).

Among the options, the incorrect option is option B.

This is because transition metals d not have  a fixed oxidation number and they cannot be obtained by looking up the group in the periodic table.

The iconic compounds obtain a transition of metal caution and a halon anon. As per the rules the correct name of the compounds should be written as to identify the incorrect one.

Learn more about the ionic compound containing a transition metal.

brainly.com/question/21578354.

Answer:

25.7 mL

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the initial solution

We have a concentrated solution and we want to prepare a diluted one. We can calculate the initial volume using the dilution rule.

C₁ × V₁ = C₂ × V₂

V₁ = C₂ × V₂ / C₁

V₁ = 0.150 M × 600 mL / 0.350 M

V₁ = 25.7 mL

Answer:

Eªcell > 0; n = 2

Explanation:

The reaction:

I2 (s) + Pb (s) → 2 I- (aq) + Pb2+ (aq)

Is product favored.

A reaction that is product favored has ΔG < 0 (Spontaneous)

K > 1 (Because concentration of products is >>>> concentration reactants).

Eªcell > 0 Because reaction is spontaneous.

And n = 2 electrons because Pb(s) is oxidizing to Pb2+ and I₂ is reducing to I⁻ (2 electrons). Statements that are true are:

Answer:

[tex]V_2=1.17L[/tex]

Explanation:

Hello,

In this case, for dilution processes, we must remember that the amount of solute remains the same, therefore, we can write:

[tex]V_1C_1=V_2C_2[/tex]

Whereas V accounts for volume and C for concentration that in this case is %(m/v). In such a way, the final volume V2 turns out:

[tex]V_2=\frac{V_1C_1}{C_2}= \frac{0.551L*50.0\%}{23.5\%}\\ \\V_2=1.17L[/tex]

Best regards.

Answer:

A)coupling between 1H nuclei attached to adjacent C atoms.

Explanation:

The word ‘vicinal’ in chemistry means three bonds from the functional groups. The two functional groups are in a relationship with the atoms in adjacent position to them.

The 1H nuclei consists of two Hydrogen nucleus which acts as the functional groups. They are however attached and in a relationship with the adjacent C atoms. This makes option A the right choice.

Answer:

[tex]1.628 M[/tex]

Explanation:

From the question we were given 0.155 moles of HBr, but Br and H are in ratio 1:1, then there are 0.155 moles of Br- ions.

We were also told that the solution contain NaBr, of 25.9 g. Then it must be converted to moles.

molar mass of NaBr =(22.99g + 79.90 )

= 102.89 g per mol.

the moles of NaBr can be calculated as 25.9 / 102.89

=0.252 moles

But Na and Br are in a ratio 1:1 , then there are 0.252 moles of Br-.

Then to get two Br- mol , we will add the first and second mol of Br- together

= 0.155 + 0.252

=0.407 moles.

The given solution has volume of 250 mL, but we know that there are 1000 ml in a liter, then if we convert to L for unit consistency we have

= 250/1000

= 0.25 L

molarity=0.407 moles/0.25 L

= 1.628 M.

Therefore, Br ion molarity is 1.628 M.

The molarity of the Br ions in the 250 ml solution has been 1.628 M.

Moles can be defined as the mass per unit molecular mass. Moles can be expressed as:

Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]

Moles of NaBr = [tex]\rm \dfrac{25.9}{102.89}[/tex]

Moles of NaBr = 0.252 mol

Moles of HBr = 0.155 mol.

Since both the compounds have 1:1 ratio of atom: Br, the Br produced has been equal to the concentration of the compound.

Br from NaBr = 0.252 mol

Br from HBr = 0.155 mol.

Total Br ions = 0.407 mol.

Molarity can be expressed as:

Molarity = [tex]\rm moles\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex]

Molarity of Br ions = 0.407 × [tex]\rm \dfrac{1000}{250\;ml}[/tex]

Molarity of Br ions = 1.628 M.

The molarity of the Br ions in the 250 ml solution has been 1.628 M.

For more information about the molarity, refer to the link:

https://brainly.com/question/12127540

Answer:

d. the conjugate base.

Explanation:

The general reaction of a weak acid, HA, with a strong base YOH, is:

HA + YOH → A⁻ + H₂O + Y⁻

Where A⁻ is the conjugate base of the weak acid and Y⁻ usually is a strong electrolyte.

That means after he complete reaction you don't have weak acid nor strong base, just conjugate base that will be in equilibrium with water, thus (Strong electrolyte doesn't change pH:

A⁻ + H₂O ⇄ HA + OH⁻

As the equilibrium is producing OH⁻, the pH of the solution is being affected for the conjugate base

Right option:

Answer:

It is a hydrogen bond but if I had to coose one of thee answers it is b. chemical bonding

Explanation:

Answer:

4.22

Explanation:

We know from the question, that the pOH of the solution is 9.78. Now the pOH is defined as -log [OH^-].

If the pOH of a solution is given, one may obtain the pH of such solution from the formula;

pH + pOH =14

Hence we can write;

pH = 14-pOH

pH = 14 - 9.78 = 4.22

Hence the pH of the solution is 4.22.

Answer: 6.31×10⁻³ moles Fe

Explanation:

To calculate moles when given atoms, we need to use Avogadro's number.

Avogadro's number: 6.022×10²³ atoms/mol

[tex](3.8*10^2^1 atoms)*\frac{mol}{6.022*10^2^3 atoms} =6.31*10^-^3 mols[/tex]

The atoms cancel out, and we are left with moles. There are 6.31×10⁻³ moles Fe.

Answer:

[tex]MM_{acid}=140.1g/mol[/tex]

Explanation:

Hello,

In this case, since the acid is monoprotic, we can notice a 1:1 molar ratio between, therefore, for the titration at the equivalence point, we have:

[tex]n_{acid}=n_{base} \\\\V_{acid}M_{acid}=V_{base}M_{base}\\\\n_{acid}=V_{base}M_{base}[/tex]

Thus, solving for the moles of the acid, we obtain:

[tex]n_{acid}=0.0215L*0.250\frac{mol}{L}=5.375x10^{-3}mol[/tex]

Then, by using the mass of the acid, we compute its molar mass:

[tex]MM_{acid}=\frac{0.753g}{5.375x10^{-5}mol} \\\\MM_{acid}=140.1g/mol[/tex]

Regards.

Answer:

21 KJ/mol

Explanation:

For this question, we have to start with the linear structure of 2-methylbutane. With the linear structure, we can start to propose all the Newman projections keep it in mind that the point of view is between carbons 2 and 3 (see figure 1).

Additionally, we have several energy values for each interaction present in the Newman structures:

-) Methyl-methyl gauche: 3.8 KJ/mol

-) Methyl-H eclipse: 6.0 KJ/mol

-) Methyl-methyl eclipse: 11.0 KJ/mol

-) H-H eclipse: 4.0 KJ/mol

Now, we can calculate the energy for each molecule.

Molecule A

In this molecule, we have 2 Methyl-methyl gauche interactions only, so:

(3.8x2) = 7.6 KJ/mol

Molecule B

In this molecule, we have a Methyl-methyl eclipse interaction a Methyl-H eclipse interaction and an H-H eclipse interaction, so:

(11)+(6)+(4) = 21 KJ/mol

Molecule C

In this molecule, we have 1 Methyl-methyl gauche interaction only, so:

3.8 KJ/mol

Molecule D

In this molecule, we have three Methyl-H eclipse interaction, so:

(6*3) = 18 KJ/mol

Molecule E

In this molecule, we have 1 Methyl-methyl gauche interaction only, so:

3.8 KJ/mol

Molecule F

In this molecule, we have a Methyl-methyl eclipse interaction a Methyl-H eclipse interaction and an H-H eclipse interaction, so:

(11)+(6)+(4) = 21 KJ/mol

The structures with higher energies would be less stable. In this case, structures B and F with an energy value of 21 KJ/mol (see figure 2).

I hope it helps!

Answer:

A. Increasing the temperature will favor forward reaction and more CaCo3 formed.

B. More CaCo3 will be formed.

C. CaCo3 will decrease and more react ants formed.

D. Less CaCo3 will be formed.

E. Iridium is a catalyst so there is no effect

Explanation:

A. Temperature will increase because it's an endothermic reaction.

B. Adding Cao will favor forward reaction and more CaCo3 formed.

C. Removing methane, more react ants are formed and CaCo3 decreases.

D. Irridi is a catalyst so it has no effect on the CaCo3 but only speeds its rate of reaction.