which of the following vectors best describes the path of the airplane? question 6 options: none of these

Option B is Correct

The velocity of the center of mass remains constant before the collision, when they collide there is a slight decrease in kinetic energy of the system since the collision is inelastic, resulting in a slight decrease of velocity, afterwards the velocity is constant again.

Velocity is the directional velocity of a moving object, observed from a given frame of reference and indicating the rate of change of position measured at a given time reference (eg 60 km/h northward). Velocity is a fundamental concept in kinematics, a branch of classical mechanics that describes the motion of bodies.

Velocity is a physical vector quantity. Both magnitude and direction are required to define it. The scalar absolute value (magnitude) of velocity is called velocity, and its magnitude is a consistent derived unit measured in the SI (metric) system as meters per second (m/s or m⋅s−1). For example, " meters/second" is a scalar, but "5 meters/second east" is a vector. An object is said to be accelerating if its velocity, direction, or both change.

Learn more about velocity here : https://brainly.com/question/24445340

#SPJ4

The amplitude is 0.25s.

Calculation:

Amplitude = A = 0.225 m

Angular frequency = w = 8π rad/s.

Frequency = f = w/2π = 8π/2πHZ = 4 HZ

Time period = T = 1/f = (1/4)s = 0.25s.

The maximum displacement or distance traveled by a point on an oscillating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. Amplitude difference between a rest position and maximum shaft deflection.

Frequency The number of waves passing a particular point per second. Duration  How long it takes for a wave cycle to complete. Sound wave amplitude is a measure of wave height. The amplitude of a sound wave can be defined as the magnitude or loudness of the maximum displacement from the average position of the vibrating particles in the medium when the sound was produced.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4

The distance that the bullet penetrates is 0.03m.

Given data:

The mass of the bullet is

m = 25 g = 0.025 kg

The bullet's initial velocity is

u = 350 m/s

The final velocity of the bullet is

v = 0

The average force opposing the motion is

F = 50000N

From Newton's second law, the acceleration derived as,

F = m. a.

a = F. m..........(1)

Substituting values in equation (1), we get:

a = 50000 N / 0.025 kg = 2×106 m/s 2

The equation of motion is,

v 2=u 2−2 a S

2 a S=u 2−v 2

S = u 2−v 2/2 a.......(2)

Substituting values in equation (2), we get:

S = (350 m/s)2−0/2(2×106 m/s 2)

 =12.25×104 m/s 4×106 m/s 2=0.03m

here, the distance that bullet penetrates is 0.03m.

Kinetic energy has the following formula: K.E. = 1/2 m v 2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kg/m per second squared if the mass is measured in kg and the velocity is measured in meters per second.

Radiant, thermal, electrical, and mechanical kinetic energies are the basic categories.

Learn more about kinetic energy here:

https://brainly.com/question/17858145

#SPJ1

5.00 × 10-3/K is the coefficient of thermal expansion of the material from which the rod is made as it increases its length to 2.0005m

The coefficient of thermal expansion explains how an object's size varies when temperature changes. In particular, it measures the fractional size change per degree change in temperature at constant pressure, where lower coefficients denote a reduced propensity for size change.

The propensity of matter to alter shape, volume, and area in reaction to a change in temperature is known as thermal expansion. The average molecular kinetic energy of a substance has a monotonic relationship with temperature.

Use the equation for linear thermal expansion ΔL=αLΔT Δ L = α L Δ T to calculate the change in length, ΔL .

Get your rod hot enough to achieve, say, 1% linear thermal expansion.

The rod's dimension has increased to 1.01 units.

The rod is 1.030301 times its original size, or 1.013 larger than it was before heating.

This equals 1.03 when rounded to three major figures. In other words, its volume is 3% higher than that of the cold specimen.

The linear expansion is tripled, or 3%, by the volumetric expansion.

Learn more about Kinetic energy here:

brainly.com/question/26472013

#SPJ1

Complete question:

A rod has a length 2.0000 m at 20.0°C. The length of the rod increases to 2.0005 m when the temperature increases to 40.0°C. What is the coefficient of thermal expansion of the material from which the rod is made?

Particles can exist in classically forbidden regions outside the finite square-well potential.

The correct option is D.

In the absence of quantum effects, everything would be continuous, smooth, and completely predictable in the Newtonian sense. However, we may not be here to get bored with this if Planck's constant were 0.

At the atomic scale, the behavior of both particles and waves is described by Planck's constant. One of the factors that led to the creation of quantum mechanics is Planck's constant. It was a surprise when those boundaries also turned to represent the limits where known rules of physics applied since the Planck scaled was developed as an universal set of units.

To know more about Planck constant visit:

https://brainly.com/question/2289138

#SPJ4

(a) θ5 in the air is 56.9° and (b) θ4 in the bottom material 35.30°. Normally, a light beam that strikes an angle on a prism's refracting face emerges from the opposite face.

(a) Approximating n=1 for air, we have

n1. sinθ1 = (1)sinθ5 ⇒56.9°=θ5

​and with the more accurate value for n air in Table below, we obtain 56.80.(b) Equation n1 sinθ c =n2 sin 90° leads to,

n1 sinθ 1=n2 ​sinθ2​ =n3​ sinθ 3​ =n4 sinθ 4

​so that. θ4 =sin −1( n1/n4.sinθ 1 )=35.30° .

The angle of incidence is formed by a line drawn perpendicular to the reflecting barrier and the wave's direction of motion.

Refraction Depending on the Refractive Indices in the Two Media and the Angle of Incidence. Snell's law states that the angle of incidence, I and the proportion of the refractive indices of the two media that make up the interface determine the angle of refraction, r.

Learn more about refraction here:

https://brainly.com/question/14760207

#SPJ4

Approximately, 400 tons of municipal solid waste landfills in the United States combust landfill gas to generate heat and electricity

We know that municipal waste has to do with the waste products that can be obtained from the activities that go on in the city. the magnitude of the municipal waste that is generated in a place would have a lot to do with the population of the area as well as the industrial saturation of the area.

This is the reason why the areas that have less population and the industries that are there are not so much do not expirience a lot of pollution and do not have a large amount of waste water that goes out as sewage.

The solid wastes that are generated in the United States is just as large as the sewage that is generated in the united states and calls for a very urgent attention.

Learn more about solid waste:https://brainly.com/question/14665452

#SPJ1

No, the activation energy for a forward reaction is not equal to the activation energy for the reverse of the same reaction.

In order for compounds to undergo a chemical reaction, a certain amount of energy is required, known as the activation energy. The unit of measurement for a reaction's activation energy (Ea) is either joules per mole (J/mol), kilojoules per mole (kJ/mol), or kilocalories per mole (kcal/mol). You can think of activation energy as the size of the potential barrier between the minima of the potential energy surface related to the initial and final thermodynamic states, which is also referred to as the energy barrier. If the system temperature is high enough, there should be a sizable number of molecules with translational energies that are equal to or higher than the activation energies.

Learn more about  activation energy here:

https://brainly.com/question/11334504

#SPJ4

By simply creating more loops or pulleys, the pulley system's mechanical advantage can be accomplished.

Equation:

It is known that a pulley system can lift a crate with 90 newtons of force. Finding the pulley system's mechanical advantage is important if the input force is 15 newtons.

The force makes the distance longer as though it were working. Mechanical advantage is not greatly affected by the number of pulleys. This is only based on the amount of weight that needs to be lifted.

Therefore,

F1/F2 = 90/15

F1/F2 = 6

Given that the crate's weight is 90 N and the input force is 15 N, this makes sense.

To know more about mechanical advantages, visit:

brainly.com/question/24056098

#SPJ1

Understanding an object's structure and function requires observation at a variety of wavelengths.

This is due to the fact that we have just lately been able to view the complete electromagnetic spectrum of the universe.There are objects in our universe that emit a wide variety of radiation having wavelengths either being too short or long for human eyes to see.

Astronomers can learn something distinctive about an item by examining its light at various wavelengths.Astronomers may see "the broad picture" of what's actually happening with that object by examining all available wavelengths and developing models that account for everything those photographs show.

To know more about wavelength visit:

https://brainly.com/question/4112024

#SPJ4

The approximate distance that the smoke travels up from the furnace is 9metres.

Distance is described as a numerical or occasionally qualitative measurement of how far apart objects or points are. In the field of physics or everyday usage, distance is usually referred to a physical length or an estimation based on other criteria.

Parameters given:

Velocity = 1.5

time = 6 seconds

We know that distance = speed x time

Hence, distance = 1.5 x 6 seconds

distance = 9 meters.

Distance is a scalar quantity that refers to how much ground an object has covered in the course of its motion while we can describe displacement as a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Learn more about distance at: https://brainly.com/question/26046491

#SPJ1

The smooth plastic jar has five pennies placed inside of it. The normal reactions of the bottom coin on the container at locations a and b will be 0.0705 lb and 0.1175 lb respectively if each coin weighs 0.0235 lb.

A contact force, the normal force is often referred to as the normal reaction force. On two surfaces that are not attached to one another, a normal force cannot be applied.

The body's weight determines the usual deceleration force. A body's position relative to the ground tells us when it is about to fall. The normal force is the portion of a force that is perpendicular to any contact surface.

To learn more about normal force visit:

brainly.com/question/13340671

#SPJ4

The roller coaster is going with 15.34 m/s when it reaches the bottom.

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another.

According to the question, potential energy of the roller coaster at initial position = mass * acceleration due to gravity* height = mgh

Let the speed of the roller coaster at the bottom = v.

So, kinetic energy at the bottom = 1/2 * mass * speed^2 = 1/2 mv^2

From conservation of energy:

mgh = 1/2mv^2

v= √( 2gh)

= √( 2 × 9.8 × 12) m/s

= 15.34 m/s.

Hence, the speed of it at the bottom is 15.34 m/s.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

The hitters final displacement from home plate is 60 m.

The displacement of an object is the change in the position of the object.

The displacement of an object is determined from the shortest distance between the initial position and the final position of an object.

The hitters final displacement from home plate is calculated as follows;

Δx = x₁ - x₂

where;

Δx = x₁ - x₂

Δx = 30 m  - ( - 30 m)

Δx = 30 m + 30 m

Δx =  60 m

Learn  more about displacement here: https://brainly.com/question/2109763

#SPJ1

The electric field strength in volts per meter is calculated to be 4.095 V/m.

Given that, speed v = 3.9 * 10 m/s

Magnetic field B = 0.105 T

Using the mass spectrometer velocity selector relationship between the electric field and magnetic field is,

v = E/B

Where,

v is the speed selector

B is magnetic field

E is electric field

Therefore, E = vB

E = 3.9 × 10 × 0.105

E = 4.095 V/m

Thus, electric field E is 4.095 V/m.

The question is incomplete. The complete question is 'What is the electric field strength in volts per meter?'

To know more about electric field:

https://brainly.com/question/15414535

#SPJ4

In the absence of an external force, the total linear momentum of the system maintains conservation, indicating that the speed of the system's center of mass is constant.

This is because the spring force between the masses acts as an internal force between the two masses.

The product of an object's mass, m, and velocity, v, is known as linear momentum, and it is a vector quantity. In order to express it and refer to momentum informally, the letter "p" is utilized. You should be aware that a body's momentum always points in the same direction as its velocity vector. Because it is a conserved quantity, the overall momentum of a system is always constant. Linear momentum is measured in kg/s.

The total linear momentum prior to an object's interaction and the total linear momentum following that interaction is identical. Any system of objects that is subject to no net external force has a constant total linear momentum.

Learn more about linear momentum here:

https://brainly.com/question/27988315

#SPJ4

Note that for a severe supercell ts to form over the great plains, one would expect the 5,000 AGL wind to be 190/45kts (Option D)

A supercell thunderstorm is distinguished by the presence of a mesocyclone, which is a deep, continually revolving updraft. As a result, these storms are sometimes known as spinning thunderstorms.

Supercells are storms that have updrafts that spin along a vertical axis and are generally but not always thunderstorms. This rotation is caused by shear in the environmental wind field (a change in wind direction and/or speed with height) that surrounds the storm as it grows.

Supercell thunderstorms are intense, long-lived storms that are characterized by strong wind shear and rotational dynamics.

The wind shear, or the change in wind speed and direction with height, is a key factor in the development and maintenance of supercell thunderstorms.

Note that AGL means Above Ground Level; while

KTS means Knots. Knots are a unit measurement of speed. I nautical mile is usually equated to one knot.

Learn more about Supercells;
https://brainly.com/question/401575?
#SPJ1

The distance before it falls back to the earth is 8.5 * 103 km. Option B

We know that the escape velocity has to do with the velocity that has to be supplied to a material so that the material can be able to escape from the earth's gravitational pull. Let us recall that the whole earth is a large gravitational field. If we throw an object up then the object would have to certainly fall doen to the ground under the influence of gravity.

It is therefore clear that gravity is the force that draws any object that  goes upwards down back to the ground. Given that we have been told here that the speed is  one-half of the escape speed, then then the magnitude of the speed is 5590.3 m/s.

Given that;

v^2 = u^2 - 2gh

v = final velocity

u = initial velocity

g = acceleration due to gravity

h = height

Then;

u^2 = 2gh

h = u^2/2g

h = ( 5590.3)^2/2 * 9.8

=  8.5 * 103 km

Learn more about escape velocity:https://brainly.com/question/14297933

#SPJ1

Maximum torque developed is (BIL²/4[tex]\pi[/tex]n).

Torque is a measure of force that can cause an object to rotate about an axis.

For any structure such as a solenoid, toroid, and circular arc, the magnetic field at a certain point of the structure is always proportional to the number of turns of the coil.

As we know magnetic field is (BIL²/4[tex]\pi[/tex]n)

2[tex]\pi[/tex]rn = L

r = (L/2[tex]\pi[/tex]n)

A = [tex]\pi[/tex]r²

A = (L²/4[tex]\pi[/tex]n²)

M = niA

M = (iL²/4n[tex]\pi[/tex])

Then Torque is Z = MBSin90°

The question is incomplete, the complete question is "a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b,  the maximum possible torque developed is?"

To know more about torque,

https://brainly.com/question/14149514

#SPJ4

Spectroscopy. distances up to about 10,000 light years.

Astronomical distance is the measurement of space between objects in the universe. It is usually measured in light years, which is the distance light travels in a year. Astronomical distance is incredibly vast and hard to comprehend, as it is measured in trillions of miles. Astronomical distance is used to measure distances between objects in the universe such as stars, galaxies, and planets. Astronomical distances are also used to measure the size of the universe, as well as the age of galaxies and stars. Astronomical distances can be measured using advanced instruments such as telescopes and spectroscopes. Astronomical distances are essential for understanding the structure of the universe and the evolution of galaxies and stars.

To learn more about astronomical distance
https://brainly.com/question/13315988
#SPJ4

The value of 'x' such that the mass то exerts a force of mg on the inclined surface at P. (N=mg)​ is given by

x = N / (mg cos θ)

Generally, To determine the value of 'x', you need to know the angle of inclination of the surface and the mass of the object. The force of gravity (N) acting on the object is equal to the mass of the object (m) multiplied by the acceleration due to gravity (g). The force of gravity is also equal to the normal force (N) exerted by the surface on the object, which is perpendicular to the surface.

If the surface is inclined at an angle θ with respect to the horizontal, the normal force will be equal to the component of the force of gravity along the surface. This component can be calculated using the formula N = mg cos θ, where θ is the angle of inclination and m is the mass of the object.

Therefore, to determine the value of 'x', you need to solve the equation N = mg cos θ for 'x'. To do this, you can rearrange the equation to solve for x:

x = N / (mg cos θ)

Substituting the values of N, m, and θ into this equation will give you the value of 'x' that you are looking for.

Read more about mass of the object.

https://brainly.com/question/6240825

#SPJ1

Answer:

Liquid water one flowed on mars,the existence of nutrients,and the previous discovery of a past magnetic field that protected the planet from cosmic and solar radiation.

The lead pollution can be remediated by the appllication of the approppiate reagents.

We know that we need to always consider the threshold concentration of pollution as we are looking at the safety of the environment

Now we are told that the safe concentration of the lead must not be more than 400 ppm. Above that concentration, the effects may be quiet fatal.

There should be spirited attempts to remediate the soil by the use different methods so that the soil can become good again for the growing of crops.

Learn more about pollution:https://brainly.com/question/23857736

#SPJ1

It is true to say that If a cable originates inside one building and leaves the building, the landlord loses control of that cable.

Cable originating from one building to another building will have total control by the landlord from which the cable have passed. Since cable passes from one building to another building in that case some part of cable is not inside the building due to that control over the cable is distributed between more than one type of landlords .Worms can be spread through means other than direct network .Now, when it passed between the two building, in that case if one landlord did some changes in some part of cable then that change will not be controlled by the landlord who live in other building.

Hence, given statement is true.

To know more about cable, visit here:

https://brainly.com/question/21816002

#SPJ4

The maximum torque on the wire is 392.3 µN·m and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Torque: Torque is a measure of the force that can cause an object to rotate about an axis. It is a vector quantity.

Given that,

diameter D=20cm

Radius r =10cm

magnetic field B =2.5mT

current I=5A

Torque= n×B

           =nBsinФ

torque=nB= NIAB

                 = 1×5×π×[tex]10^{2}[/tex]×[tex]10^{-4}[/tex]×2.5×[tex]10^{-3}[/tex]

                 = 39.23×[tex]10^{-5}[/tex]

                 = 392.3µN·m

minimum potential energy= -nB= -392.3µN·m

maximum potential energy =+nB= +392.3µN·m

Therefore the maximum torque on the wire is 392.3 µN·m when is placed in an uniform magnetic field of 2.50mT and the range of potential energy is -392.3µN·m(minimum) to +392.3µN·m(maximum)

Learn more about torque:

https://brainly.com/question/20691242

#SPJ4

Air resistance is hardly noticeable. true regarding the 0.09-kilogram component. This causes 0.01kg to land farther from the launch site than 0.09kg did.

0.09kg will move to the west due to momentum conservation (opposite of 0.01 kg). Additionally, since both are at the same height above the ground, it will take them equal amounts of time to descend to the ground.

Allowing v to be the speed of 0.01 kg, which means that the speed of 0.09kg will be smaller than 0.01 kg,

0.01v - (0.09)V = 0

V = 0.01 v/ 0.09 = 0.111v

The speed of 0.09 kg = 0.111v

The speed of 0.09 kg is less than 0.01kg.

Because of this, 0.01kg hits the ground farther from the launch point than 0.09kg did.

The amount of resistance in an electrical circuit represents the resistance to current flow. The Greek letter omega (), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.

Resistance measurements are typically performed in order to evaluate the health of a component or a circuit.

Current flow is inversely correlated with resistance. Conductor damage from corrosion or burning could be one of several potential causes if it is extremely high.

Learn more about resistance here:

https://brainly.com/question/17010736

#SPJ4

1. The velocity of the center of mass of the two-block system is zero.

2. The magnitude of the acceleration of the left block is greater than that of the right block.

The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.

Learn more about center of mass here:

https://brainly.com/question/27549055

#SPJ4

A basketball experiences four forces as it soars through the air. The ball is being pulled down to the Earth by gravity, being propelled upward by buoyancy, and slowed down due to the drag force created by the air it collides with.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

For instance, a basketball will strike the ground hard when it is dribbled. The ground's force on the ball is balanced by this force of the ball on the ground. The ball is sent upwards by the second force since it acts in the opposite direction. There are numerous characteristics of motion that depend on this interaction.

Thus, A basketball experiences four forces as it soars through the air.

To learn more about force, follow the link;

https://brainly.com/question/13191643

#SPJ1

In cases when the stairway is straight, the width of the landing in the direction of travel must at least match the stair's width and cannot be greater than 1219mm.

The four main axes are north, south, east, and west. A map is a representation or drawing of the entire or a portion of the surface of the earth done to scale and on a flat surface. A spherical shape, however, cannot be totally flattened. Distance, direction, and symbol are the three elements that make up a map.

Most maps have an arrow with the letter "N" on them in the upper right-hand corner. North is indicated by this arrow's orientation. It is referred to as the north line. You can determine which direction is east, west, or south once you know which way is north. The four main axes are North, South, East, and West. ​

Learn more about direction here:

https://brainly.com/question/20051283

#SPJ4