Which of the following is true of highly conductive elements?

Hence the expression of ω in terms of m and k is

[tex]\omega = \sqrt{\frac{k}{m}[/tex]

Given the expressions;

[tex]T_s = 2 \pi \sqrt{\frac{m}{k} } \ and \ T_s = \frac{2 \pi}{\omega}[/tex]

Equating both expressions we will have;

[tex]2 \pi \sqrt{\frac{m}{k} } = \frac{2 \pi}{\omega}[/tex]

Divide both equations by 2π

[tex]\frac{2 \pi\sqrt{\frac{m}{2 \pi} } }{2 \pi}=\frac{\frac{2 \pi}{\omega} }{2\pi}\\\sqrt{\frac{m}{2 \pi} } = \frac{1}{\omega}\\[/tex]

Square both sides

[tex](\sqrt{\frac{m}{k} } )^2 = (\frac{1}{\omega} )^2\\\frac{m}{k} = \frac{1}{\omega ^2} \\\omega ^2 = \frac{k}{m}[/tex]

Take the square root of both sides

[tex]\sqrt{\omega ^2} =\sqrt{\frac{k}{m} } \\\omega = \sqrt{\frac{k}{m}[/tex]

Hence the expression of ω in terms of m and k is

[tex]\omega = \sqrt{\frac{k}{m}[/tex]

Learn more about subject of the formula here: https://brainly.com/question/19557491

Answer:

203360Pa

Explanation:

Pressure= density of liquid*height*g

=1000*10*10

=100000Pa

Total pressure= water pressure + atmospheric pressure

=1000000+103360

=203360 Pascal

Answer:

To convert 400 mm to m you can apply the formula [m] = [mm] / 1000; use 400 for mm. Thus, the conversion 400 mm m is the result of dividing 400 by 1000. 0.4

PLEASE MARK AS BRAINLIEST ANSWER

Vtb xe máy là:

v=s : t= 500 : 25=20(m/s)

Explanation:

st system:the internationak system of measurement which i declared form internationäl convention of scientists held in france in 1960AD is Si system

CGS System:it measure in length in centimeter mass in gram time in second

Explanation:

In scalar addition we have to do only the sum of magnitude as we know that the scalar quantities don't have direction.

since it is the scalar quantity the direction will be same for all the magnitudes.

Answer:

In scalar addition we have to do only the sum of magnitude as we know that the scalar quantities don't have direction...

since it is the scalar quantity the direction will be same for all the magnitudes.

on the other hand if it was a vector addition then it should be with two different directions which are considerable show the resultant vector needs to be calculated by vector addition method.

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

Answer:

Explanation:

Yes, According to law of conservation of energy, it has been said that energy cannot be created or destroyed.

Answer:

I don't know ???

sorry

Answer:

Rotational kinetic energy

Explanation:

It is caused by circular motion.

Answer:

a plumber

Explanation:

Answer:

light reflects off the objects and enter our eyes

Answer:

The Planck constant, or Planck's constant, is a fundamental physical constant denoted h, and is of fundamental importance in quantum mechanics. A photon's energy is equal to its frequency multiplied by the Planck constant. Due to mass–energy equivalence, the Planck constant also relates mass to frequency.

Planck postulated that the energy of light is proportional to the frequency, and the constant that relates them is known as Planck's constant (h). His work led to Albert Einstein determining that light exists in discrete quanta of energy, or photons.

E = hf

[tex] \sf \: h = 6.626 \times {10}^{ - 34} \: kg \: {m}^{2} {s}^{ - 1} [/tex]

We know

[tex]\boxed{\sf \lambda=\dfrac{C}{V}}[/tex]

[tex]\\ \sf\longmapsto \lambda=\dfrac{3\times 10^8ms^{-1}}{4.75\times 10^{12}s^{-1}}[/tex]

[tex]\\ \sf\longmapsto \lambda=0.631\times 10^{-4}m[/tex]

[tex]\\ \sf\longmapsto \lambda=6.31\times 10^{-5}m[/tex]

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

The distance, to the nearest tenth, is 314.9 light-years.

The given data is:

A recently discovered planet is located 1.85*10^5 miles from Earth.

Now we want to transform this distance to light-years.

Remember that a light-year is defined as "the distance that the light would travel in one year".

using the relation:

distance = speed*time

The speed of light is:

speed = 6.706*10^8 mi/h

And in one year has 8760 hours, then we have:

time = 8760 h

replacing these in the equation we get:

distance = speed*time

distance = (6.706*10^8 mi/h)*(8760 h)  = 5,874,456,000,000 miles

Son one light-year is equivalent to 5,874,456,000,000 miles

1 light-year = 5,874,456,000,000 miles

So to transform a distance in miles to light-years, we just need to divide that distance by 5,874,456,000,000 miles:

The distance between the new planet and Earth was:

D = 1.85*10^15 mi = ( 1.85*10^15)/(5,874,456,000,000) = 314.9 light-years.

if you want to learn more about this, you can read:

https://brainly.com/question/1302132

A simulation study that is used to learn about a planet by simulating as many conditions as possible, you can visualize what the planet might be like and learn things about it without actually visiting it. The correct option is c.

A simulation is a method of simulating a process or change in the actual world to forecast future events or to explain past events and their causes. These days, simulations are frequently carried out using computers. Scientists use simulations to find answers and to test complicated systems.

A fire drill is used in this instance to get everyone ready for an impending event. In fire drills, the fire alarm is sounded even when there isn't actually a fire.

Therefore, the correct option is c.

To learn more about simulation, refer to the link:

https://brainly.com/question/16359096

#SPJ2

Answer:

Jet stream would be displaced southwards causing heavy rain and flooding.

Explanation:

The other options of the question were A) Jet stream would be displaced northwards causing drought. B) Jet stream would be displaced southwards causing drought. D) Jet stream would be displaced northwards causing heavy rain and flooding,

The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is "Jet stream would be displaced southwards causing heavy rain and flooding."

We are talking about climate or weather terminology. In this case, we are referring to the "El Niño" (the Children) effect. Its presence affects the weather in North America. This phenomenon combines with the "La Niña) effect and it presents itself every two to seven years, ad they last from 8 to 12 months, affecting the weather conditions of the region.

Answer:

jet stream should be displaced southwards which causes heavy rainfall and flood.

Answer:

A = 150 cm at 120 degc

Where A + B = C       find B

B = C - A          add -A to both sides

Ax = 150 cos 60 = -75

Ay = 150 sin 60 = 129.9

Likewise

Cx = 114.7

Cy = 80.3

Bx = Cx - Ax = 114.7 + 75 = 189.7

By = Cy - Ay = 80.3 -129.9 = -49.6

B = (189.7^2 + 49.6^2)^1/2 = 196.7       length of B vector

tan B = By / Bx = -49.6 / 189.7       B = -14.65 deg

Also

sin B = By / B = -49.6 / 196.1 = -14.65 deg

So B is 196.1 cm at -14.65 deg

Answer: There are multiple options:

By varying the supply voltage.

By varying the flux, and by varying the current through the field winding.

By varying the armature voltage, and by varying the armature resistance.

Helpful Link:

https://www.elprocus.com/what-are-the-best-ways-to-control-the-speed-of-dc-motor/

Answer:

Explanation:

The only one that doesn't have a time unit that is squared is the one that is a label for speed or velocity. Acceleration has a label with the time unit squared, like m/s/s. Choice D is the only unit for speed/velocity.

Answer: D

Explanation: metres per second (m/s)

Tenemos un problema de termodinamica sobre gases ideales, los cuales pueden ser descritos por la ecuación de estado del gas ideal

[tex]P*V = n*R*T[/tex]

donde:

P = presión

V = volumen

n = número de moles

R = constante de los gases

T = temperatura.

1) Para el primer problema podemos pensar que el gas dentro del globo es un gas ideal:

Originalmente sabemos que n = 4 y V = 5.0 L

Entonces tendremos:

[tex]P*(5.0 L) = (4 moles)*R*T[/tex]

Ahora decidimos agregar 8 moles más, dejando constante la presión y la temperatura, entonces podemos reescribir la ecuación de arriba como:

(5.0L)/(4 moles) = R*T/P

Y como R, T y P son constantes, entonces:

R*T/P es una constante.

Esto quiere decir que cuando agreguemos 8 moles, para tener un total de 12 moles, tendremos que:

V'/(12 moles) = R*T/P = (5.0L)/(4 moles)

Donde V' es el nuevo volumen final del globo, y es lo que queremos obtener.

V'/(12 moles) =  (5.0L)/(4 moles)

V' =   (5.0L)*(12 moles)/(4 moles) = (5.0 L)*3 = 15.0 L

2) Queremos obtener la densidad en gramos sobre litro de un gas con una masa molar de 60g/mol, a P = 0.75 atm y T = 25°C.

Primero pasemos la temperatura a grados kelvin:

T = 25°C = (25 + 273.15)°K = 298.15°K

Planteamos la ecuación del gas ideal:

[tex]P*V = n*R*T[/tex]

reemplazando R = 0.082 (atm*L/mol*k), además de la presión y la temperatura para un solo mol de gas:

[tex](0.75 atm)*V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)[/tex]

Resolviendo para V obtenemos que:

[tex]V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)/(0.75 atm) = 32.597 L[/tex]

Así, vemos que un mol de este gas ocupa un volumen de  32.597 L

Y también sabemos que un mol de este gas pesa 60 gramos.

Recordando que la densidad es el cociente entre la masa y el volumen, podemos ver que la densidad del gas será:

[tex]d = 60g/(32.597 L) = 1.84 g/L[/tex]

Si deseas leer mas sobre el tema, podes ver:

https://brainly.com/question/18528542

Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.

In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .

The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.

The further 5 electrons will be in lower second energy level which is denoted by p.

Learn more at https://brainly.com/question/24373325

Answer:

#1. 5

#2.They have valence electrons in the same energy level.

#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.

#4. cesium (Cs)

#5.  There are two electrons in the first energy level and seven electrons in the second energy level.

Explanation:

Answer:

301.6 N

Explanation:

The length of the wire L₀ = 8 m and its diameter, d = 4 mm = 4 × 10⁻³ m. Since its temperature drops by  10°C, it will have a change in length ΔL = L₀αΔθ where α = linear expansivity of steel, a 12 × 10⁻⁶ /K, and Δθ = temperature change = -10°C = -10 K(negative since it is a drop)

So, the strain, ε = ΔL/L₀ = αΔθ = 12 × 10⁻⁶ /K × 10 K = 12 × 10⁻⁵

Now the Young's modulus of steel, Y = σ/ε where σ = stress = T/A where T = increase in tension in steel wire and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 4 × 10⁻³ m and ε = strain = 12 × 10⁻⁵

So, σ = Yε

Since Y = 2 × 10¹¹ N/m².

Substituting the values of the variables into the equation, we have

σ = Yε

σ = 2 × 10¹¹ N/m² × 12 × 10⁻⁵

σ = 24 × 10⁶ N/m²

Since σ = T/A

T = σA

T = σπd²/4

Substituting the values of the variables into the equation, we have

T = σπd²/4

T = 24 × 10⁶ N/m² × π × (4 × 10⁻³ m)²/4

T = 24 × 10⁶ N/m² × π × 16 × 10⁻⁶ m²/4

T = 24 × 10⁶ N/m² × π × 4 × 10⁻⁶ m²

T = 96 N × π

T = 301.59 N

T ≅ 301.6 N

So, the increase in tension in the steel wire is 301.6 N

Explanation:

FALSE

The first periodic table of elements Mendeleev created contained 63 elements.

Answer:

I'm over halfway through it so don't have a complete answer but i think you just need to keep ontop of everything and write down all the key equations on flashcards or something and aim to learn them at the beginning of each topic. i found the longer questions hard so recommend practising those

Explanation:

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

Answer:

F = 32.28 N

Explanation:

For this exercise we must use the rotational equilibrium relation

          Σ τ = 0

In the initial configuration it is in equilibrium, for which all the torque and forces are compensated. By the time the payment lands on the bar, we assume that the counter-clockwise turns are positive.

          W_bird  L / 2 - F_left 0.595 - F_right 0.595 = 0

we assume that the magnitude of the forces applied by the hands is the same

          F_left = F_right = F

          W_bird L / 2 - 2 F 0.595 = 0

          F = [tex]\frac{m_{bird} \ g L} { 4 \ 0.595}[/tex]

we calculate

         F = 0.560 9.8 14.0 /2.38

         F = 32.28 N

Answer:

he will be in profit

Explanation:

Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region

Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region

that's why he will be in profit but not loss

The temperature of a gas molecule is measured by the average translational kinetic energy

Answer:

The temperature of a gas is a measure of the average translational kinetic energy of the molecules. In a hot gas, the molecules move faster than in a cold gas; the mass remains the same, but the kinetic energy, and hence the temperature, is greater because of the increased velocity of the molecules

Explanation:

This is also from Go0gle because my explanation would've been an essay long .

but in shorter version if the gas molecules move fast it's hot an if it moves slow its cold hope this helps .