Which of the following compounds are the same?
Compound 1 is composed of 67 g of H and 33 g of F.
Compound 2 is composed of 29 g of Na and 71 g of Br.
Compound 3 is composed of 39 g of Na and 61 g of Br.
Compound 4 is composed of 33 g of F and 67 g of H.
A. Compounds 1 and 4
B. Compounds 2 and 3
C. Compounds 1 and 2
D. Compounds 2 and 4

We were aware that SiO2 is a network covalent solid and that CO2 is a molecular solid, but I'm not sure how I would go about determining that.

Each silicon and carbon have the same number of valence electrons, and they both contain two oxygen atoms. Because solid sulfur dioxide is a molecule and has covalent bonds, it is not a network solid even if it is a solid and has covalent bonds. An example of a network solid is diamond. One of the many forms of elemental carbon found in nature, diamond is an allotrope of carbon. On an atomic level, it resembles this. The carbon atoms are linked together by the lines.

Learn more about molecular here-

https://brainly.com/question/4505951

#SPJ4

An organism with the genotype of AaXx can produce gametes containing  either AX, Ax, aX, ax  if the two genes are unlinked .

An organism's genotype is the complete set of its genetic material. [1] Genotype can also be used to refer to the alleles or variants that an individual has at a particular gene or locus. The number of alleles an individual can have for a particular gene depends on the number of copies of each chromosome (also called polyploidy) found in that species. Diploid species like humans have two complete sets of chromosomes. This means that each individual has her two alleles for a particular gene. If both alleles are the same, the genotype is said to be homozygous. If the alleles are different, the genotype is called heterozygous.

Genotypes contribute to the phenotype, observable traits and characteristics of an individual or organism. The extent to which genotype influences phenotype depends on the trait.

Learn more about genotype here : https://brainly.com/question/22117

#SPJ4

Answer:

3Ca(OH)2 = 3(40+2(16+1))

= 222

448.2 ÷ 222 = 2.02mol

6NaOH = 6(23+16+1)

= 240

240 × 2.02mol = 484.5 g

The gas which will have a similar rate of effusion with CO at 350k is N2.

The rate of effusion is directly proportional to the molar mass of the gas.

The molar mass of CO is :

Mass of Carbon + Mass of oxygen

12 + 16 = 28g

Similarly finding the molar mass of N2 :

2 * Mass of Nitrogen

2 * 14 = 28g

Since the mass of both the gases are same, they'll have a similar rate of effusion.

Learn more about the Molar Mass : brainly.com/question/22997914

#SPJ4

The time it takes for one-half of the radioactive parent isotope to decay into the daughter isotope is known as the half-life.

As a result, if we begin with 1 gram of the parent isotope, there will only be 0.5 gram of the parent isotope left after 1 half-life. The fundamental idea behind radiometric dating is that by comparing an isotope's presence in a sample to its abundance on Earth and its known half-life (rate of decay), you may determine the sample's age. A radiometric dating technique is radiocarbon dating, often known as carbon-14 dating. It determines the age of carbon-bearing by using the naturally occurring radioisotope carbon-14 (14C).

Learn more about isotope here-

https://brainly.com/question/27475737

#SPJ4

The layers of the earth include the following;troposphere, stratosphere, mesosphere, thermosphere, and exosphere. It's explanation will be discussed below.

The layers of the earth are grouped into five major layers that includes the following:

Troposphere: This is the layer of the earth that is closest to the earth's surface. It is characterized by having 78% nitrogen, 21% oxygen and remainder of trace gases (carbon dioxide, ozone, hydrocarbons, argon).

Stratosphere: This layers is located immediately above the troposphere. This layer is where ozone formation occurs and it's suitable for flying jets. It can be said that the stratosphere helps to protect us against ultraviolet rays of the sunlight.

Mesosphere: This is the layer found immediately above the stratosphere. This layer is characterized by having internal atmospheric gravity waves.

Thermosphere: This is the layer that is found immediately above the Mesosphere. It has the ability to absorb the sun's radiation.

Exosphere: This is the layer that is found immediately above the thermosphere. There is accumulation of the lightest gases such as hydrogen and helium in this layer.

Learn more about earth here:

https://brainly.com/question/25624188

#SPJ1

Rank the relative viscosity and vapor pressure of the substances Paraffin, hexadecane, octane, 2,2,4-trimethylpentane,methane.

In addition to being a fuel or fuel component for diesel and tractor engines, paraffin is frequently utilized as a fuel for jet engines and rockets. These are some typical applications for paraffin: Paraffin wax, a white or colorless soft solid that is used as a lubricant, in candles, crayons, electrical insulation, and petroleum jelly, is a complex mixture of hydrocarbons that is especially obtained from distillates of wood, coal, petroleum, or shale oil. It is primarily used in coating and sealing, candles, rubber compounding, pharmaceuticals, and cosmetics. Consuming excessive amounts of paraffin might result in intestinal blockage, which can bring on symptoms including nausea, vomiting, and constipation. An individual with a dye allergy could get tongue swelling if the paraffin contains that dye.

Learn more about Paraffin here:

https://brainly.com/question/14682311

#SPJ4

Answer: To determine how many grams of calcium chloride will be produced when 27.0 g of calcium carbonate is combined with 11.0 g of hydrochloric acid, we can use the balanced chemical equation for the reaction:

CaCO3 + 2 HCl -> CaCl2 + H2O + CO2

From the equation, we can see that for every mole of calcium carbonate that reacts, one mole of calcium chloride is produced. We can use the molar masses of each compound to convert the number of grams of each reactant to moles, and then use the mole ratios from the balanced chemical equation to determine the number of moles of calcium chloride produced.

The molar mass of calcium carbonate is 100.09 g/mol, so 27.0 g of calcium carbonate is equal to 0.269 moles. The molar mass of hydrochloric acid is 36.46 g/mol, so 11.0 g of hydrochloric acid is equal to 0.302 moles.

From the balanced chemical equation, we can see that for every mole of calcium carbonate that reacts, two moles of hydrochloric acid are needed. This means that we have an excess of hydrochloric acid, and the limiting reactant in this reaction is calcium carbonate. Therefore, the number of moles of calcium chloride produced will be equal to the number of moles of calcium carbonate consumed, which is 0.269 moles.

To determine the mass of calcium chloride produced, we can multiply the number of moles of calcium chloride by its molar mass. The molar mass of calcium chloride is 110.98 g/mol, so the mass of calcium chloride produced is 0.269 moles * 110.98 g/mol = 29.8 g.

Therefore, when 27.0 g of calcium carbonate is combined with 11.0 g of hydrochloric acid, 29.8 g of calcium chloride will be produced.

A. The units remaining after the conversion is mi

B. The units remaining after the conversion is atoms

A. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

in × (ft/in) × (mi/ ft)

Cancel out in

ft × (mi/ ft)

Cancel out ft

mi

Thus, the unit remaining is mi

B. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

g × (mol/g) × (atoms/ mol)

Cancel out g

mol × (atoms/ mol)

Cancel out mol

atoms

Thus, the unit remaining is atoms

Learn more about units conversion:

https://brainly.com/question/19420601

#SPJ1

Answer:

2 g of the parent isotope is left.

Explanation:

The half-life of a radioactive isotope is the amount of time it takes for half of the isotope to decay. In this case, the half-life of the isotope is 8 days, which means that after 8 days, half of the isotope will have decayed.

To determine how much of the parent isotope is left after 40 days, we need to calculate how many half-lives have passed in that time. Since the half-life is 8 days, and 40 days have passed, we can divide 40 by 8 to find the number of half-lives that have occurred: 40 / 8 = 5

Since 5 half-lives have passed, we can calculate the amount of the parent isotope that is left by multiplying the original amount of the isotope by 1/2 to the power of the number of half-lives that have passed: 64 * (1/2)^5 = 64 * (1/32) = 2 g

Therefore, after 40 days, only 2 g of the parent isotope is left.

According to the amagats law , the total pressure that is occupied by a gas is a sum of its partial volumes.

We know that the volume of a gas has to do with the space that is being occupied by the gas. This is actually the physical space that has been taken up by the gas.

We know that a gas takes up the entire volume of the container. The volume of the container that is taken up by each of the gasses that can be found in a given mixture of gases is not the same.

As such we can be able to speak of the partial volume of a gas which is the space that the gas is able to take up in a mixture of gasses. This is the fraction of the volume of the container that has been occupied by the particular gas that is in question.

Learn more about amagats law :https://brainly.com/question/15396335

#SPJ1

This chemical reaction: ca(s) zncl2(aq)zn(s)cacl2(aq) then, balanced half-reactions describing the oxidation and reduction that happen in this reaction is Ca (s) + ZnCl2 (aq) ---> Zn (s) + CaCl2 (aq).

When the substrate's oxidation states change, a chemical reaction known as redox (reduction-oxidation) takes place. Reduction occurs when electrons are obtained or the oxidation state drops; oxidation occurs when electrons are lost or the oxidation state increases. There are two types of redox reactions: During an electron transfer, only one electron (usually) travels from the reducing agent to the oxidant. This type of redox reaction is frequently discussed in terms of redox couples and electrode potentials. When one substrate gives way to another, an atom transfers. When iron rusts, for example, oxygen's oxidation state decreases as it receives electrons released by the iron, while the oxidation state of the iron atoms increases as the iron transforms into an oxide. Despite the fact that oxidation processes are typically related to the generation of oxides, other chemical species can carry out the same function.  To weaken C=C (and other) bonds, hydrogen atoms are exchanged during hydrogenation.

To know more about reduction please refer: https://brainly.com/question/19528268

#SPJ4

when applied research is conducted in settings outside the laboratory,  the focus on a specific real world problem can be a problem.

The configuration and contents of laboratories are determined by the diverse needs of the specialists that work inside. A laboratory might have a particle accelerator or a vacuum chamber, whereas a metallurgy lab might have tools for casting, refining, or evaluating the strength of metals. A psychologist would utilise a room with one-way mirrors and covert cameras to examine behaviour in their lab, whereas a biologist or chemist might employ a wet laboratory. In laboratories, such as those where computer scientists typically operate, computers (and occasionally supercomputers) are sometimes utilised for either simulations or data processing. Scientists in other professions will continue to use a variety of labs. In laboratories, engineers build, assemble, and test technical objects.

The complete question is:

when applied research is conducted in settings outside the laboratory, which of the following can be a problem?

a. examines the basic laws of human behavior

b. is just as likely to occur in the laboratory as in the field

c. focuses on a specific real world problem

d. has no connection with theory

To learn more about laboratory click on the given link: https://brainly.com/question/28233400

#SPJ4

Based o the percentage masses of the elements, the empirical formula of epinephrine is C₉H₁₃O₃N.

The empirical formula of epinephrine is calculated below as follow:

Mole ratio of the elements are determined:

Carbon = 59% / 12

Carbon = 0.049 moles

Hydrogen = 7.1% / 1

Hydrogen = 0.07 moles

Oxygen = 26.2% / 16

Oxygen = 0.016

Nitrogen = 7.7% / 14

Nitrogen = 0.0055

The simplest whole-number ratio will be:

C = 0.049/0.0055

C = 9

Hydrogen = 0.07/0.0055

H = 13

Oxygen = 0.016/0.0055

Oxygen = 3

Nitrogen = 0.0055/0.0055

Nitrogen = 1

The empirical formula = C₉H₁₃O₃N

Learn more about empirical formula at: https://brainly.com/question/1603500

#SPJ1

The statement that is  true about the elements;

Atom X and Atom Y are in the same row on the periodic table. Option C

We know that the periodic table has to do with an arrangement of the elements in an order that is systematic. As such, when we look at the periodic table, we are looking at a systematization of the elements in a way that it is quite easy for us to be able to identify the elements.

Now we know that the mass number is the sum of the atomic number which in turn is the proton number and the number of the neutrons in the atom.

We know that the atomic number is what would tell us the group to which the element has been found to belong and in this case we can see that element X is just right to element Y in the periodic table.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

A resource can be classified as renewable or nonrenewable based on whether it can replace itself at the rate it is used up or whether it has a finite supply.

To learn more about Renewable energy refer to:

https://brainly.com/question/7995

#SPJ1

All of these reactions can potentially lead to a change in the hybridization of one or more carbon atoms, but the extent of the change and the specific details of the reaction will depend on the specific reaction being considered.

Oxidation of an alcohol to yield a carboxylic acid: This reaction typically involves the addition of an oxygen atom to the carbon atom that was bonded to the hydroxyl group in the alcohol, as well as the removal of two hydrogen atoms. This can result in a change in the hybridization of the carbon atom, depending on the specific alcohol being oxidized and the conditions of the reaction.

Neutralization of an amine using a strong mineral acid: This reaction typically involves the addition of a proton to the nitrogen atom in the amine, as well as the removal of a hydroxyl group. This can result in a change in the hybridization of the nitrogen atom, depending on the specific amine being neutralized and the conditions of the reaction.

Substitution of an aromatic ring using a halogen: This reaction typically involves the substitution of a hydrogen atom on the aromatic ring with a halogen atom. This can result in a change in the hybridization of the carbon atom bonded to the hydrogen atom that is replaced, depending on the specific aromatic compound and the conditions of the reaction.

Halogenation of an alkane: This reaction typically involves the substitution of one or more hydrogen atoms on an alkane with a halogen atom. This can result in a change in the hybridization of the carbon atoms bonded to the hydrogen atoms that are replaced, depending on the specific alkane and the conditions of the reaction.

Hydrolysis of an ester to yield an acid and an alcohol: This reaction typically involves the addition of a hydroxyl group to the carbon atom that was bonded to the ester group, as well as the removal of the oxygen atom that was bonded to the same carbon atom. This can result in a change in the hybridization of the carbon atom, depending on the specific ester being hydrolyzed and the conditions of the reaction.

Find more about Hybridisation

brainly.com/question/17102306

#SPJ4

Identify each statement as True or False a) True b) True c) True d) False  Not just pure water, but all aqueous solutions are subject to the equilibrium constant Kw.

In pure water, the concentrations of the hydronium and hydroxide ions are identical, making the solution neutral. Based on how much they ionise in water, acids and bases are categorised as strong or weak. - Salt and water are typically produced when acids and bases react. When the amount of hydrogen ions and hydroxide ions are equilibrium in moles, neutralisation takes place. The weak acid neutralises the base when it is introduced to the mixture.

To learn more about solution, click here.

https://brainly.com/question/1616939

#SPJ4

Ozone decomposes to oxygen according to the equation 2O₃(g)⟶3O₂(g). Create the equation that ties the rate expressions for this reaction to the creation of oxygen and the disappearance of O₃.

Given that there are more reactants in a given volume of space, increasing the concentration of reactants improves the likelihood that they will collide in the proper direction. As a result, the reactions rate would increase if the reactants were concentrated more. more often with each other. As a result, the reaction progresses more quickly as the temperature rises. Since the molecules will have less kinetic energy, travel more slowly, and collide less frequently as a result of a lower temperature, the rate of reaction will also be reduced.

Learn more about reaction here-

https://brainly.com/question/13516179

#SPJ4

The correct answer to the given question about Spectator ions in Hydrochloric acid and ammonia reaction is option E) Cl- Only.

The term "spectator ion" refers to an ion that can be found in a chemical equation both as a reactant and a product. In the reaction of aqueous solutions, a spectator ion can therefore be seen. Aqueous hydrogen chloride solutions are what we refer to as hydrochloric acid or muriatic acid. It has an unmistakable unpleasant fragrance and is colorless. Strong acid is how one would describe it. Most animal species, including humans, have it as a part of their gastric acid in their digestive tracts. A naturally occurring substance with the formula NH3, ammonia is a combination of nitrogen and hydrogen. Ammonia, a stable binary hydride and the most basic pnictogen hydride, is a colorless gas with a strong, pungent odor.

Question

What are the spectator ions in the reaction between aqueous hydrochloric acid and ammonia?

A) H+ and NH3

B) H+,  Cl-, NH3 and NH4+

C) Cl- and  [tex]NH_{4}^{+}[/tex]

D) H+, Cl- and NH4+

E) Cl- Only

To learn more about spectator ion click here

brainly.com/question/22277121

#SPJ4

1 A + two C and d → C + S t where rate=k[A][B][rate] 2. An experiment with [A]o = 0.000847 T s as well as [B]o = 1.11 M was run for a predefined number of seconds. The slope of a ln[A] vs. grown steadily was -9.43. rate of reaction is 3.62m/s

Slope and slant both refer to an incline up from a reference surface or line that is generally straight. The ground slopes (either upward or straight down) sharply here. To slope is to slope vertically in an ambiguous path A line's steepness could be determined by looking at its slope. Altitude is calculated mathematically as "rise over run."

Learn more about reaction here:

https://brainly.com/question/13440548

#SPJ4

Acids

There are various definitions for an acid. The simplest description of an acid is a chemical molecule with one or more hydrogen atoms that, when dissolved in water, gives forth hydronium ions (H3O+).

Because acids are molecular, they do not assume the expanded three-dimensional structures of ionic substances like NaCl and remain single molecules in their pure form. However, when these molecules are dissolved in water, a positively charged anion and a hydronium ion are produced as a result of the chemical connection between the hydrogen atom and the remainder of the molecule breaking. An equation involving chemicals can represent this:

HCl+H2O→H3O++Cl−

In an inorganic acid's formula, the H of the acid is written first. After the acid dissolves, the anion is all that is left of the acid (apart from the H). Although a significant class of chemicals, organic acids are not covered in this article.

Acid Names

Since all acids contain hydrogen, an acid's name is determined by the anion that it is associated with. These anions come in monatomic and polyatomic forms.

Binary acid names (in aqueous form)

An acid that contains hydrogen and another element is referred to as a binary acid. The majority of binary acids have a halogen in them. The prefix hydro- is used to start an acid name, which is then followed by the base name of the anion and the suffix -ic.

Oxyacids name

An oxyacid is an acid made up of three elements: hydrogen, oxygen, and another one. Typically, the third element is a nonmetal.

a) Oxyanions with the -ite end.

The anion's root is followed by the suffix -ous to form the name of the acid. No prefix is present.

b)Oxyanions that end in -ate.

The anion's root and the suffix -ic are used to identify the acid. No prefix is present.

In conclusion

Acids are molecular substances that discharge hydrogen ions.

The two elements hydrogen and the other make up a binary acid.

Hydrogen, oxygen, and another element are all present in oxyacids.

The anion that is bound to the hydrogen provides the basis for the acid's name.

To know more about acid nomenclature

https://brainly.com/question/25148363

AlCl 3 is Lewis base,PH3 is Lewis base,BH3 is Lewis acid ,BF3 is Lewis acid.

The crucial step is AlCl 3 accepting a chloride ion lone-pair to generate AlCl 4 and the highly acidic, or electrophilic, carbonium ion. Lewis bases:  RCl +AlCl 3 → R + + AlCl 4−, etc. [ edit] The highest occupied molecular orbital (HOMO) of an atomic or molecular species that is strongly localised is known as a Lewis base.Lewis acid borane (BH3) has three hydrogen atoms and one boron atom in its molecule. The Lewis structure of borane features a single connection connecting each hydrogen atom to boron (BH3). Only three bonds surround the boron atom, and there are no lone pairs on the atom itself. We will learn how to draw the BH3 Lewis structure in this lesson.Only six electrons orbit the boron atom, according the Lewis structure of BF3. As a result, the boron atom's octal is incomplete. Borane BF3 is therefore regarded as a Lewis acid.A highly poisonous gaseous chemical is phosphorus. Three sigma bonds and one lone pair are present around the phosphorus atom in the Lewis structure of phosphine (PH3). Hydrogen and phosphorous atoms have no charges. The trigonal pyramidal shape of PH3 is a fundamental shape.

learn more about Lewis acid Refer:brainly.com/question/15570523

#SPJ4

The reaction is given :    ²³⁴Pa₉₁  ----->   X  +   ⁰e₋₁ , the equation is balanced and the nucleus represented by X is ²³⁴U₉₂.

The balanced reaction is given as :

²³⁴Pa₉₁  ----->   X  +   ⁰e₋₁

This reaction is the balanced reaction and X is represented the nucleus and is given as :  ²³⁴U₉₂.

The given reaction is the nuclear reaction. the nuclear reaction is the reaction in which the nuclides are produced by the collision between the two atoms nuclei. the nuclear reaction are of the two types the nuclear fission and the nuclear fusion reaction. the nuclear fission is the splitting of the large nuclei in to the smaller ones.

To learn more about nuclear fission here

https://brainly.com/question/13820743

#SPJ4

Answer:CH

3

​

CH

2

​

CH

2

​

C≡C−CH

3

​

Explanation:

The volume occupied at 25 °C. Remember to convert between °C and K. V2 = 3.311 L is the correct answer.

What is volume?

Volume is the measure of the amount of space occupied by an object or a substance. It is measured in three dimensions: length, width, and height. In the International System of Units (SI), it is measured in cubic meters (m3). Volume is also commonly measured in liters (L), gallons (gal), or cubic feet (ft3). Volume can also refer to the amount of a substance or object, such as the volume of a gas or the volume of a liquid.

Temperature and Volume equation

Given,

The volume at -12°C = 2.90L

Temperature, T1 = -12°C

= (-12°C + 273)

= 261K

And, Volume at 25°C = ?

(25°C + 273)K

= 298K

Now, by using this equation:-

V1/T1 = V2/T2

V2 = V1 x T2/T1

V2 = 2.90L x 298K/261K

V2 = 3.311L

Hence, The volume at  25°C will be 3.311L

To learn more about Temperature and Volume equation

https://brainly.com/question/9956672

#SPJ1

A 1.5 g/ml of liquid is present in beaker 1 and 2.0 g/ml of liquid is present in beaker 2. In both beakers, the item sinks. The item has a density of more than 2.0 g/cm³.

a material substance's density is defined as its mass per unit volume. D is density, M is mass, and V is volume, therefore the formula for density is d = M/V. In terms of grammes per cubic centimetre, density is frequently expressed. As an illustration, the density of water is 1 g/cc, whereas the density of the Earth is 5.51 g/cc. As kilos per cubic metre, density can also be calculated (in metre-kilogram-second or SI units). As an illustration, the air has a density of 1.2 kilogrammes per cubic metre. Textbooks and manuals contain lists of the densities of common solids, liquids, and gases. It is simple to determine a body's mass from its volume, or vice versa, using its density.

Learn more about density here:

https://brainly.com/question/17990467

#SPJ4

The volume of the object is 1.5ml.

This refers to the space occupied within the boundaries of an object in three-dimensional space. It is also called the capacity of the object.

In the question:

ρ = 400 g/mL

m = 600 mg

v = ?

Formular for calculating density ρ:

ρ = m/v

Where,

ρ= Density of the object

m= Mass of the object

v = volume of the object

Were are given the values of density and mass in the question. We are to calculate the volume.

Makinig v subject of the formular we have:

v = m/ρ

v =  600 mg

      400 g/mL

v = 1.5ml

Learn more about volume on

https://brainly.com/question/23937702

#SPJ1