Which of the following buffer systems would be the best choice to create a buffer with pH 9.10?
a) HF/KF (pKa = 3.14)
HNO2/KNO2 (pKa = 3.39)
NH3/NH4Cl (pKa = 9.25)
HClO/KClO (pKa = 7.46)
b) for the best buffer system, calculate the ratio of the molarities of the buffer components required to make the buffer
c) for the best buffer system, calculate the ratio of the masses of the buffer components required to make 1.00 L of the buffer

Answers

Answer 1

Answer:

a) NH3/NH4Cl (pKa = 9.25)

b) [tex]\frac{[Base]}{[Acid]} =0.708[/tex]

c)

Explanation:

Hello,

a) In this case, for a buffering capacity, if we want to select the best buffer, we should ensure that the buffer's pKa approaches the desired pH, therefore, since the buffer NH3/NH4Cl has a pKa of 9.25 that is very close to the desired pH of 9.10, we can pick it as the best choice.

b) In this case, we use the Henderson-Hasselbach equation in order to compute the molar ratio:

[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )\\\\log(\frac{[Base]}{[Acid]} )=9.10-9.25=-0.15\\\\\frac{[Base]}{[Acid]} =10^{-0.15}\\\\\frac{[Base]}{[Acid]} =0.708[/tex]

c) Finally, for the ratio of masses, we use the molar mass of both ammonia as the base (17 g/mol) and ammonium chloride as the acid (53.45 g/mol) to compute it, assuming 1.00 L as the volume of the solution:

[tex]\frac{m_{Base}}{m_{Acid}} =0.708\frac{molBase}{molAcid}*\frac{17gBase}{1molBase} *\frac{1molAcid}{53.45gAcid}\\ \\\frac{m_{Base}}{m_{Acid}} =0.225[/tex]

Regards.

Answer 2

The best choice to create a buffer with pH 9.10 is NH₃/NH₄Cl (pKa=9.25), ratio of molarities and masses for NH₃/NH₄Cl are 0.708 & 0.225 respectively.

How do we calculate the pH of buffer solution?

pH of buffer solution will be calculated by using the Henderson Hasselbalch equation as:

pH = pKa + log([base]/[acid])

From the above reaction it is clear that valu of pH is directly proportional to the value of pKa. So, the pKa value for NH₃/NH₄Cl is comparatively high which will close to the 9.10 pH.Ratio of the molarities for the NH₃/NH₄Cl buffer solution will be calculated by using the Henderson Hasselbalch equation as:

        log([NH₃]/[NH₄Cl]) = 9.10 - 9.25 =

        log([NH₃]/[NH₄Cl]) = -0.15

       [NH₃]/[NH₄Cl] = [tex]10^{-0.15}[/tex] = 0.708

Ratio of masses for the NH₃/NH₄Cl buffer solution will be calculated by using the below equation as:

        M = n/V, where

        M = molarity

        V = volume = 1L

        n = moles = W(mass) / M(molar mass)

        Mass(NH₃)/Mass(NH₄Cl) = 0.708 {(mol of NH₃×17g of NH₃NH₃) /          

                                                              (mol of NH₄Cl×53.45g of NH₄Cl)

       Mass(NH₃)/Mass(NH₄Cl) = 0.225

Hence required values are calculated above.

To know more about Henderson Hasselbalch equation, visit the below link:
https://brainly.com/question/13651361


Related Questions

You wish to construct a galvanic cell with the anode consisting of a Ni electrode in a 1.0 M Ni(NO3)2 solution. What would be the highest standard cell potential if used as the cathode in this galvanic cell?

Answers

Answer:

Au^3+(aq) +3e ------> Au(s). 1.50 V

Explanation:

When we construct the galvanic cell, our intention is to produce energy by spontaneous electrochemical reactions. In order to have a spontaneous electrochemical reaction, E°cell must be positive. The more positive the value of E°cell, the more spontaneous the reaction is.

E°cell= E°cathode - E°anode

If E°cathode= 1.50 V

E°anode= -0.25 V

E°cell= 1.50 -(-0.25)

E°cell= 1.75 V

Hence the process; Au^3+(aq) +3e ------> Au(s) yields the highest standard cell potential

The tosylate of (2R,3S)-3-phenylbutan-2-ol undergoes an E2 elimination on treatment with sodium ethoxide. Draw the structure of the alkene that is produced.

Answers

Answer:

(R)-but-3-en-2-ylbenzene

Explanation:

In this reaction, we have a very strong base (sodium ethoxide). This base, will remove a hydrogen producing a double bond. We know that the reaction occurs through an E2 mechanism, therefore, the hydrogen that is removed must have an angle of 180º with respect to the leaving group (the "OH"). This is known as the anti-periplanar configuration.

The hydrogen that has this configuration is the one that placed with the dashed bond (red hydrogen). In such a way, that the base will remove this hydrogen, the "OH" will leave the molecule and a double bond will be formed between the methyl and the carbon that was previously attached to the "OH", producing the molecule (R) -but-3- en-2-ylbenzene.

See figure 1

I hope it helps!

There are 454 grams in one pound. How many pounds are in 700 grams

Answers

Answer:

1.543 pounds = 700 grams

Calculate the pH of a buffer that is 0.13 M in lactic acid and 0.10 M in sodium lactate. Express your answer using two decimal places.

Answers

Answer:

pH of the buffer is 3.75

Explanation:

It is possible to find pH of a buffer using Hendersson-Hasselbalch equation:

pH = pKa + log [A⁻] / [HA]

Where [A⁻] is molar concentration of the conjugate base and [HA] concentration of the weak acid

In the lactic buffer, pKa = 3.86. Lactic acid is the weak acid and its conjugate base is tha lactate salt. H-H equation for this buffer is:

pH = 3.86 + log [Lactate] / [Lactic acid]

Replacing with the concentrations of the problem:

pH = 3.86 + log [0.10M] / [0.13M]

pH = 3.75

pH of the buffer is 3.75

A compound is found to contain 26.94 % nitrogen and 73.06 % fluorine by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 104.02 g/mol. What is the molecular formula for this compound?

Answers

Answer:

THE EMPIRICAL FORMULA OF THE COMPOUND IS NF2

THE MOLECULAR FORMULA OF THE COMPOUND IS N2F4

Explanation:

To calculate the empirical formula for the compound, we:

1. Write out the percentage weight of each elements

N = 26.94%

F = 73.06 %

2. Divide each by its atomic mass

( N= 14, F = 19)

N = 26.94 / 14 = 1.924

F = 73.06 / 19 = 3.845

3. Divide each by the smaller of the values

N = 1.924 / 1.924 = 1

F = 3.845 / 1.924 = 1,998

4. Round up to a whole number and write the empirical formula

N= 1

F = 2

So the empirical formula of the compound is N F2

To calculate the molecular formula, we:

(N F2 )n = molecular weight

( 14 + 19*2) n = 104.02

52 n = 104.02

n = 2.000

The molecular formula of the compound will be:

(N F2)2 = N2F4

In conclusion, the empirical formula of the compound is NF2 and the molecular formula of the compound is N2F4

Which of the following elements is in the same group as Sulfur (S)?

Answers

Answer:

PLEASE SHOW ME THE ELEMENTS OR I WOULD ENLIST ALL THE ELEMENTS.

Explanation:

Group 6A (or VIA) of the periodic table are the chalcogens: the nonmetals oxygen (O), sulfur (S), and selenium (Se), the metalloid tellurium (Te), and the metal polonium (Po)

A balloon is filled to a volume of 1.50 L with 3.00 moles of gas at 25 °C. With pressure and temperature held constant, what will be the volume (in L) of the balloon if 0.50 moles of gas are released?

Answers

Answer:

Volume : 1.25 L

Explanation:

We are given here that the volume ( V[tex]_1[/tex] ) = 1.50 Liters, the initial moles ( held at 25 °C ) = 3.00 mol, and the final moles ( n[tex]_2[/tex] ) = 3.00 - 0.5 = 2.5 mol. The final mol is calculated given that 0.50 mol of gas are released from the prior 3.00 moles of gas.

Volume ( V[tex]_1[/tex] ) = 1.50 L,

Initial moles ( n[tex]_1[/tex] ) = 3.00 mol,

Final Volume ( n[tex]_2[/tex] ) = 3.00 - 0.5 = 2.5 mol

Applying the combined gas law, we can calculate the final volume ( V[tex]_2[/tex] ).

P[tex]_1[/tex]V[tex]_1[/tex] / n[tex]_1[/tex]T[tex]_1[/tex] = P[tex]_2[/tex]V[tex]_2[/tex] / n[tex]_2[/tex]T[tex]_2[/tex] - we know that the pressure and temperature are constant, and therefore we can apply the following formula,

V[tex]_1[/tex] / n[tex]_1[/tex] = V[tex]_2[/tex] / n[tex]_2[/tex] - isolate V[tex]_2[/tex],

V[tex]_2[/tex] = V[tex]_1[/tex] n[tex]_2[/tex] / n[tex]_1[/tex] = 1.50 L [tex]*[/tex] 2.5 mol / 3.00 mol = ( 1.5 [tex]*[/tex] 2.5 / 3 ) L = 1.25 L

The volume of the balloon will be 1.25 L.

Q 11.20: What is the product of the reaction between t-BuCl and MeOH? A : t-BuOH B : MeOCl C : t-BuOMe D : (CH3)2CCH2

Answers

Answer:

C : t-BuOMe

Explanation:

The tert -butanol is a tertiary alcohol and when chloride ion attacks the carbocation, it forms t-BuCl.

The reaction of tert-butyl chloride or t-BuCl ((CH3)3C−Cl) with methanol and MeOH (CH3−OH) gives the product tert-Butyl methyl ether or t-BuOMe (CH3)3C−OCH3:

                   (CH3)3C−Cl + CH3−OH => (CH3)3C−OCH3 + HCl

Hence, the correct asnwer is C : t-BuOMe

Chlorine monoxide and dichlorine dioxide are involved in the catalytic destruction of stratospheric ozone. They are related by the equation:

2ClO(g) ⇌ Cl2O2(g) for which Kc is 4.96×10^11 at 273 K.

For an equilibrium mixture in which [Cl2O2] is 6.00 x 10^-6M, what is [ClO]?

Answers

Answer:

[ClO] = 3.48×10¯⁹ M.

Explanation:

The following data were obtained from the question:

Equilibrium constant (Kc) = 4.96×10¹¹

Concentration of Cl2O2, [Cl2O2] = 6x10¯⁶ M.

Concentration of ClO, [ClO] =.?

The equation for the reaction is given below:

2ClO(g) ⇌ Cl2O2(g)

The equilibrium constant for a reaction is simply defined as the ratio of the concentration of product raised to their coefficient to the concentration of the reactant raised to their coefficient.

The equilibrium constant, Kc for the reaction is given by:

Kc = [Cl2O2] / [ClO]²

Thus, we can calculate the concentration of ClO, [ClO] as follow:

Kc = [Cl2O2] / [ClO]²

4.96×10¹¹ = 6x10¯⁶ / [ClO]²

Cross multiply

4.96×10¹¹ × [ClO]² = 6x10¯⁶

Divide both side by 4.96×10¹¹

[ClO]² = 6x10¯⁶ / 4.96×10¹¹

[ClO]² = 1.21×10¯¹⁷

Take the square root of both side

[ClO] = √ (1.21×10¯¹⁷)

[ClO] = 3.48×10¯⁹ M

Therefore, the concentration of ClO, [ClO] is 3.48×10¯⁹ M.

Draw the major organic product that is expected when cyclopentanecarboxylic acid is treated with each of the following reagents:

a. NaOH
b. [H+]

Answers

Answer:

a. Sodium cyclopentanecarboxylate

b. No reaction

Explanation:

In this case, in the cyclopentanecarboxylic acid we have a carboxylic acid functional group. Therefore we have an "acid". The acids by definition have the ability to produce hydronium ions ([tex]H^+[/tex]).

With this in mind, for molecule a. we will have an acid-base reaction, because NaOH is a base. When we put together an acid and a base we will have as products a salt and water. In this case, the products are  Sodium cyclopentanecarboxylate (the salt) and water.

For the second molecule, we have the hydronium ion  ([tex]H^+[/tex]). This ion can not react with an acid. Because, the acid will produce the hydronium ion also, so a reaction between these compounds is not possible.

See figure 1

I hope it helps!

While balancing a chemical equation, we change the _____ to balance the number of atoms on each side of the equation.

Answers

Answer:

While balancing a chemical equation, we change the coefficient  to balance the number of atoms on each side of the equation

Explanation:

While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

What is chemical equation?

To summarize in chemistry terms, a chemical equation depicts the initial chemicals, or reactants, on the left-hand side and the final compounds, or products, just on right-hand side, divided by an arrow. In the chemical equation, the number of atoms in each element as well as the total charge are the same on opposite of the equation's sides.

Chemical equations are used in chemistry to depict chemical processes by writing the reactants and products in terms of their corresponding chemical formulas. While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

Therefore, while balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.

To know more about chemical equation, here:

https://brainly.com/question/29028257

#SPJ6

For the reaction CO2(g) + H2(g)CO(g) + H20(g)
∆H°=41.2 kJ and ∆S°=42.1 J/K
The standard free energy change for the reaction of 1.96 moles of Co2(g) at 289 K, 1 atm would be_________KJ.
This reaction is (reactant, product)___________ favored under standard conditions at 289 K.
Assume that ∆H° and ∆S° are independent of temperature.

Answers

Answer:

The ΔG° is 29 kJ and the reaction is favored towards reactant.

Explanation:

Based on the given information, the ΔH°rxn or enthalpy change is 41.2 kJ, the ΔS°rxn or change in entropy is 42.1 J/K or 42.1 * 10⁻³ kJ/K. The temperature given is 289 K. Now the Gibbs Free energy change can be calculated by using the formula,  

ΔG° = ΔH°rxn - TΔS°rxn

= 41.2 kJ - 289 K × 42.1 × 10⁻³ kJ/K

= 41.2 kJ - 12.2 kJ

= 29 kJ

As ΔG° of the reaction is positive, therefore, the reaction is favored towards reactant.  

Two elements represents by the letter Q and R atomic number 9 and 12 respectively. Write the electronic configuration of R​

Answers

Answer:

Atomic no = 12 = Mg

Explanation:

It is given that,

The atomic number of two elements that are represented by letter Q and R are 9 and 12.

We need to write the electronic configuration of R. Atomic number shows the number of protons in atom.

For R, atomic number = 12

Its electronic configuration is : 2,8,2

It has two valance electrons in its outermost shell. The element is Magnesium (Mg).

1.40 m3 is how many mL

Answers

[tex] \LARGE{ \boxed{ \rm{ \pink{Solution:}}}}[/tex]

We know, 1 m³ of space can hold 1000 l of the substance.

⇛ 1 m³ = 1000 l----(1)

And, 1 l is 1000 times more than 1 ml

⇛ 1 l = 1000 ml------(2)

So, From (1) and (2),

⇛ 1 m³ = 1000 × 1000 ml

⇛ 1m³ = 1000000 ml

We had to find,

⇛ 1.40 m³ = 1.40 × 1000000 ml

⇛ 1.40 m³ = 140/100 × 1000000 ml

⇛ 1.40 m³ = 1400000 ml

⇛ 1.40 m³ = 14,00,000 ml / 14 × 10⁵ ml / 1.4 × 10⁶ ml

☃️ So, 1.40 m³ = 14 × 10⁵ ml / 1.4 × 10⁶ ml.

━━━━━━━━━━━━━━━━━━━━

the answer is 1400000

Which of the following correctly summarizes the
relative composition of the lithosphere with
respect to inorganic and organic material?
A) inorganic >> organic
B) inorganic = organic
C) inorganic << organic
D) There is no organic matter in the lithosphere

Answers

Answer:

A

Explanation:

The lithosphere represents the layer of hardened/solid rock that makes up the hard part of the earth, including the brittle upper portion of the mantle and the crust. The lithosphere is broken into pieces that are referred to as plates. The pieces move to and away from each other in a process known as plate tectonics. The movement of plates accounts for the global locations of volcanoes, earthquakes, and mountain ranges.

The lithosphere is made of largely of inorganic materials known as silicates. The weathering of the solid rocks together with the interaction of living organisms gives rise to soil with an appreciable amount of organic materials.

The correct option is, therefore A.

Use the following equation to determine the charge on bromine when it dissociates from sodium and determine whether it is being oxidized or reduced: Cl2 + NaBr -> NaCl + Br2A. It starts with a charge of 0 and is oxidized. B. It starts with a charge of -1 and is reduced. C. It starts with a charge of 0 and is reduced. D. It starts with a charge of -1 and is oxidized.

Answers

It starts with a charge of 0 and is oxidized. Hence, option A is correct.

What is a chemical equation?

A chemical reaction is a representation of symbols of the elements to indicate the number of substances and moles of reactant and product.

[tex]Cl_2 + NaBr[/tex] ->[tex]NaCl + Br_2[/tex]

The oxidation number of bromine changes from -1 (in  NaBr) to 0 (in Br

2). Thus, NaBr is oxidized.

The oxidation number of chlorine changes from 0 to -1. Thus, chlorine is reduced.

Hence, option A is correct.

Learn more about chemical equations here:

brainly.com/question/20492533

#SPJ5

The enthalpy change for a chemical reaction is: a. the temperature change b. the amount of heat given off or absorbed c. related to molar volume d. none of the above

Answers

Answer:

b. the amount of heat given off or absorbed

Explanation:

Hello,

In this case, we should take into account a formal definition of enthalpy change such as an energetic change that occurs in a system when matter is transformed by a given chemical reaction from reactants to products. Thus, such energetic change is macroscopically exhibited and it is related with either a temperature increase or decrease; it means that if a reaction exhibits a temperature increase, we say that heat was given off and if the temperature exhibits a decrease, we say that heat is absorbed. For that reason, answer is b. the amount of heat given off or absorbed.

Regards.

Advantages of using a resource person in handling the first aid lesson

Answers

The advantage of a resource person would be that it will provide a hands-on activity that will allow the students to experience spacing between organs and on the body of the person.

It will also allow them to identify challenges when doing this and will engage them more in the activity and lesson.

Answer:A resource person add knowledge to the course

Explanation:

Which of the following represents six molecules of water? 6HO 2 6H 2O 1 6H 2O H 6O

Answers

Answer:

6H20 represents six molecules of water

Answer:

6H20 represents six molecules of water

Explanation:

Nitric oxide reacts with oxygen to give nitrogen dioxide, an important reaction in the Ostwald process for the industrial synthesis of nitric acid: 2NO(g)+O2(g)⇌2NO2(g)
Part A If Kc=6.9×105 at 227 ∘C,
what is the value of Kp at this temperature? Express your answer using two significant figures. Kp =
Part BIf Kp=1.3×10−2 at 1000 K, what is the value of Kc at 1000 K? Express your answer using two significant figures. Kc =

Answers

Answer:

Kp=1.68×10⁴∆1.7×10⁴

Kc=1.06∆1.1

Explanation:

Value of Kp at 227°C is 2.86×10² and value of Kc at 1000 K is 1.56.

How are Kp and Kc related?

Kp and Kc are related by the formula Kp=Kc(RT).For part A , Kp is calculated as,

Kp=6.9×10⁵×8.314×500=28.683×10² and for part B Kc is calculated as,

Kc=1.3×10[tex]^-2[/tex]/(8.314×1000)=1.56

Kc and Kp are equilibrium constants of a mixture of ideal gases. Kp is equilibrium constant when concentrations at equilibrium are in atmospheric pressure and Kc is equilibrium constant when concentrations are in molarity. The relation is only valid for gaseous mixtures. The relation between these two parameters is obtained through ideal gas equation.

Kc and Kp of reaction change with temperature of reaction but remain unaffected by change in concentration , pressure and presence of catalyst.

Learn more about equilibrium constants,here:

https://brainly.com/question/15118952

#SPJ2

Gas is contained in a 9.00-L vessel at a temperature of 24.0°C and a pressure of 5.00 atm. (a) Determine the number of moles of gas in the vessel. mol (b) How many molecules are in the vessel? molecules

Answers

Answer:

a. Moles in the vessel = 1.85 moles of the gas

b. 1.11x10²⁴ molecules are in the vessel

Explanation:

a.It is possible to determine moles of a gas using the general law of gases:

PV = nRT

Where P is pressure: 5.00atm; V is volume = 9.00L; R is gas constant: 0.082atmL/molK; T is absolute temperature: 273.15K +24.0 = 297.15K

Computing the values:

PV / RT = n

5.00atm* 9.00L / 0.082atmL/molK*297.15K = n

Moles in the vessel = 1.85 moles of the gas

b. With Avogadro's number we can convert moles of any compound to molecules thus:

Avogadro's number = 6.022x10²³ molecules / mole

1.85moles ₓ (6.022x10²³ molecules / mole) =

1.11x10²⁴ molecules are in the vessel

A baseball has a mass of 0.145 kilograms. If acceration due to gravity is 9.8m/s,what is the weight of the baseball in newtons?

Answers

Answer:

I hope it works

Explanation:

As we know that

w=m*g

given m=0.145 , g=9.8

hence we get

w= (9.8)*(0.145)

w=1.421 m/sec 2

if its help-full thank hit the stars and brain-list it thank you

3,3-dibromo-4-methylhex-1-yne​

Answers

Explanation:

see the attachment. hope it will help you...

An 80L capacity steel cylinder contains H2 at a pressure of 110 atm and 30 ° C, after extracting a certain amount of gas, the pressure is 80 atm at the same temperature. How many liters of hydrogen (measured under normal conditions) have been extracted?

Answers

Answer:

2200 L

Explanation:

Ideal gas law:

PV = nRT,

where P is absolute pressure,

V is volume,

n is number of moles,

R is universal gas constant,

and T is absolute temperature.

The initial number of moles is:

(110 atm) (80 L) = n (0.0821 L atm / K / mol) (30 + 273.15) K

n = 353.58 mol

After some gas is removed, the number of moles remaining is:

(80 atm) (80 L) = n (0.0821 L atm / K / mol) (30 + 273.15) K

n = 257.15 mol

The amount of gas removed is therefore:

n = 353.58 mol − 257.15 mol

n = 92.43 mol

At normal conditions, the volume of this gas is:

PV = nRT

(1 atm) V = (92.43 mol) (0.0821 L atm / K / mol) (273.15 K)

V = 2162.5 L

Rounded, the volume is approximately 2200 liters.

The direction of the functional group is called?

Answers

Explanation:

they are called hydrocarbyls

pls mark me brainliest

Answer:

The first carbon atom that attaches to the functional group is referred to as the alpha carbon.

Suppose that a 100 mL sample of ideal gas is held in a piston-cylinder apparatus. Its volume could be increased to 200 mL by

Answers

Answer:

e. reducing the pressure from 608 torr to 0.40 atm at constant temperature.

Explanation:

According to Boyle's law when a gas is at the same temperature and there is a mass in a closed container so the pressure and the volume changes in the opposite direction

So here the equation is

[tex]P_1V_1=P_2V_2[/tex]

Now we choose the options

where,

[tex]V_1 = 100\ mL = 0.1\ L\\\\V_2 = 200\ mL = 0.2\ L[/tex]

[tex]P_1 = 608\ torr = 0.8\ atm \\\\P_2= 0.4\ atm[/tex]

Now applying these values to the above equation

So,

P1V1=P2V2

[tex]P_1V_1=P_2V_2[/tex]

[tex]0.8\times0.1 = 0.4\times0.2[/tex]

0.8 = 0.8

Hence, it is proved

3. Identify the reagents you would use to convert 1-bromopentane into each of the following compounds: (a) Pentanoic acid (b) Hexanoic acid (c) Pentanoyl chloride (d) Hexanamide (e) Pentanamide (f) Ethyl hexanoate

Answers

Answer:

Explanation:

a )

CH₃CH₂CH₂CH₂CH₂Br + KOH   ⇒ CH₃CH₂CH₂CH₂CH₂OH

CH₃CH₂CH₂CH₂CH₂OH  + acidic potassium dichromate ⇒  CH₃CH₂CH₂CH₂COOH

b )

CH₃CH₂CH₂CH₂CH₂Br + KCN ⇒ CH₃CH₂CH₂CH₂CH₂CN  Hydrolysis ⇒ CH₃CH₂CH₂CH₂CH₂COOH .

c )

CH₃CH₂CH₂CH₂CH₂Br + KOH   ⇒ CH₃CH₂CH₂CH₂CH₂OH

CH₃CH₂CH₂CH₂CH₂OH  + acidic potassium dichromate ⇒  CH₃CH₂CH₂CH₂COOH + SOCl₂ ( thionyl  chloride ) ⇒ CH₃CH₂CH₂CH₂COCl

d )

CH₃CH₂CH₂CH₂CH₂Br + KCN ⇒ CH₃CH₂CH₂CH₂CH₂CN  Hydrolysis ⇒ CH₃CH₂CH₂CH₂CH₂COOH + PCC ( NH₃ ) ⇒ CH₃CH₂CH₂CH₂CH₂CONH₂

e )

CH₃CH₂CH₂CH₂CH₂Br + KCN ⇒ CH₃CH₂CH₂CH₂CH₂CN  Hydrolysis ⇒ CH₃CH₂CH₂CH₂CH₂COOH + C₂H₅OH ( Ethyl alcohol + H⁺ )⇒  

CH₃CH₂CH₂CH₂CH₂COOC₂H₅ ( ethyl hexanoate )

what is a chemical that is safe to use in food but in small amounts?

Answers

Answer:

Toxins

Explanation:

1.78 L of gas is at a pressure of 735 torr. What is the volume in liters (L) when the pressure decreases to 700.0 torr

Answers

Explanation:

using boyles law

p1v1=p2v2

735 x 1.76 = 700 x V2

1293.6 = 700 x V2

V2 = 1293.6/700

V2 = 1.85L

If 2.9g of water is heated from 23.9C to 98.9C, how much heat (in calories) was added to the water?

Answers

Answer:

Explanation:

we know that

ΔH=m C ΔT

where ΔH is the change in enthalpy (j)

m is the mass of the given substance which is water in this case

ΔT IS the change in temperature and c is the specific heat constant  

we know that given mass=2.9 g

ΔT=T2-T1 =98.9 °C-23.9°C=75°C

specific heat constant for water is 4.18 j/g°C

therefore ΔH=2.9 g*4.18 j/g°C*75°C

ΔH=909.15 j

Other Questions
What's the solution of the following linear system? 5x + 2y = 9 5x 2y = 3 Research has favored cooperative learning in cases where two essential conditions are met. First, there must be some kind of recognition or small reward provided to groups that do well so that group members can see that it is in their interest to help their group-mates learn. What is the second essential condition? Which latitude band has 4 distinct seasons? (Use Latitude and LongitudeNotes)a. Equatorb. Low 0-30c. Mid 30-60d. High 60-90 What is the difference between virtual images produced by concave, plane, and convex mirrors?What does the negative sign in the value of magnification produced by a mirror indicate aboutan image? 70% of what number is 56 Ch. 13 Trojan war How does the morality of the gods compare to that of the mortals? responses should be between 150-750 words. Choose just ONE of the following questions to answer: What activities can a person participate in to be considered "actively looking for a job? A publisher is deciding whether or not to invest in a new printer. The printer would cost $900, and would increase the cash flows in year 1 by $500 and in year 3 by $800. Cash flows do not change in year 2.If the interest rate is 12% Is the investment in the new printer feasible? The report "Teens and Distracted Driving: Texting, Talking and Other Uses of the Cell Phone Behind the Wheel" summarizes data from a survey of a representative sample of 800 teens between the ages of 12 and 17. The following statements were made on the basis of the resulting data.- 75% of all American teens own a cellphone- 66% of all American teens use a cellphone to send a receive text messages- 26% of American teens age 16-17 have used a cellphone to text while drivingRequired:a. Is the inference made one that involves estimation or one that involved hypothesis testing?b. What is the population of interest? American teenagers? American teenagers between ages 12-17? Americans? Teenagers? What is the ratio of the length of to the length of? badydropped from4. Ithe sameheight oncein the equatar andthen in the polar region in whichplace will it fall faster? Explaincah reason What adaptation allows the Artic fox to survive in its environment? A refrigeration system at your company uses temperature sensors fixed to read Celsius (0C) values, but the system operators in your control room understand only the Fahrenheit scale. You have been asked to make a Fahrenheit (F) label for the high temperature alarm, which is set to ring whenever the system temperature rises above -10C. What Fahrenheit value should you write on the label? After winning power, the Jacobins sought strong leadership to face overwhelming challenges by asking for direction from Englands political leadership. deciding to form the Committee of Public Safety. using the leadership of former supporters of the monarchy. using the leadership of former supporters of the Church. A concurring opinion is delivered when at least two justices, but less than a majority, hold the same opinion in a case. explains the chief justice's position on a case. explains why the Court accepted the case in the first place. is a separate view written by a justice who votes with the majority but disagrees with its reasoning. is delivered when the Court interprets a constitutional issue. In part A, you analyzed genes that contribute to two diseases. (cystic fibrosis and muscular dystrophy) How can scientists use this information to develop new treatments for these diseases? Based on your findings, do you think that scientists will need to develop multiple treatments to control symptoms of these diseases? Explain your reasoning. HELP ASAP!!! WILLL GIVE BRAINLIEST FOR THE BEST ANSWER!!! If a pregnant woman has high blood glucose levels, it brings extra glucose to baby, causing the baby to put on extra weight. This non-communicable disease is called _______________ . gestational diabetes pancreatitis metastasis emphysema Which of the following statements is true? Bacteria and protozoa are examples of unicellular organisms. Individual cells do not need to maintain homeostasis. Most multicellular organisms reproduce through mitosis. Two identical daughter cells are created from sexual reproduction. How hot does it get in Death Valley? The following data are taken from a study conducted by the National Park System, of which Death Valley is a unit. The ground temperatures (F) were taken from May to November in the vicinity of Furnace Creek. Compute the mean, median, and mode for these ground temperatures. (Enter your answers to one decimal place.) 147 153 170 172 185 181 182 185 181 170 181 167 153 145 Factor as the product of two binomials. 81+18x+x^2