Which of the following BEST summarizes the relationship between groups and culture and critical thinking?

Answer:

Check the explanation

Explanation:

Part A

F = CA

this drag force balances the weight = 6X 9.8

so

6X9.8 = 0.5 X A X0.5 X 1.2 X 532

A= 0.069 m2

Part B

here the sorce is moving and the observer is at rest

so f= f(- 1 - 1

f = 1.1X10 343 343 – 53

f' = 1.3 KHz

Part C:

given the intensity = 30 dB

we know that I dB = 10 log (I(W/m2))

so we get I (W/m2) = 1000

Part D : The catch

Given that U1 = 53 M1 = 6 kg

U2 =-10 M2=0.25

V1=V2

now conserving momentum

6 X 53 -0.25 X10 =(6+0.25)V

V= 50.48 m/sec

Answer:

The horizontal distance between two adjacent crests or troughs is known as the wavelength.

Answer: Wavelength

Explanation:

From crest to crest, it is one full wavelength

Answer:

a) 1.248 rad/s

b) 13.728 m/s

c) 0.52 rad/s^2

d) 17.132m/s^2

Explanation:

You have that the angles described by a astronaut is given by:

[tex]\theta=0.260t^2[/tex]

(a) To find the angular velocity of the astronaut you use the derivative og the angle respect to time:

[tex]\omega=\frac{d\theta}{dt}=\frac{d}{dt}[0.260t^2]=0.52t[/tex]

Then, you evaluate for t=2.40 s:

[tex]\omega=0.52(2.40)=1.248\frac{rad}{s}[/tex]

(b) The linear velocity is calculated by using the following formula:

[tex]v=\omega r[/tex]

r: radius if the trajectory of the astronaut = 11.0m

You replace r and w and obtain:

[tex]v=(1.248\frac{rad}{s})(11.0m)=13.728\frac{m}{s}[/tex]

(c) The tangential acceleration is:

[tex]a_T=\alpha r\\\\\alpha=\frac{\omega^2}{2\theta}=\frac{(1.248rad/s)^2}{2(0.260(2.40s)^2)}=0.52\frac{rad}{s^2}[/tex]

(d) The radial acceleration is:

[tex]a_r=\frac{v^2}{r}=\frac{(13.728m/s)^2}{11.0m}=17.132\frac{m}{s^2}[/tex]

Answer:

 6 m/s

Explanation:

Given that :

mass of the block   m =  200.0 g  = 200 × 10⁻³ kg

the horizontal spring constant   k  =  4500.0 N/m

position of the block (distance x) = 4.00 cm  = 0.04 m

To determine the speed the block will be traveling when it leaves the spring; we applying the  work done on the spring as it is stretched (or compressed) with the kinetic energy.

i.e [tex]\frac{1}{2} kx^2 = \frac{1}{2} mv^2[/tex]

[tex]kx^2 = mv^2[/tex]

[tex]4500* 0.04^2 = 200*10^{-3} *v^2[/tex]

[tex]7.2 =200*10^{-3}*v^{2}[/tex]

[tex]v^{2} =\frac{7.2}{200*10^{-3}}[/tex]

[tex]v =\sqrt{\frac{7.2}{200*10^{-3}}}[/tex]

v = 6 m/s

Hence,the speed the block will be traveling when it leaves the spring is  6 m/s

Answer:

The deceleration is  [tex]a = - 76.27 m/s^2[/tex]

Explanation:

From the question we are told that

   The height above  firefighter safety net is [tex]H = 14 \ m[/tex]

   The length by which the net is stretched is [tex]s = 1.8 \ m[/tex]

From the law of energy conservation

    [tex]KE_T + PE_T = KE_B + PE_B[/tex]

 Where [tex]KE_T[/tex] is the kinetic energy of the person before jumping which equal to zero(because to kinetic energy at maximum height )

   and  [tex]PE_T[/tex] is the potential energy of the before jumping  which is mathematically represented at

          [tex]PE_T = mg H[/tex]

and  [tex]KE_B[/tex] is the kinetic energy of the person just before landing on the safety net  which is mathematically represented at

        [tex]KE_B = \frac{1}{2} m v^2[/tex]

and  [tex]PE_B[/tex] is the potential energy of the person as he lands on the safety net which has a value of zero (because it is converted to kinetic energy )

   So the above equation becomes

          [tex]mgH = \frac{1}{2} m v^2[/tex]

=>           [tex]v = \sqrt{2 gH }[/tex]

    substituting values

                [tex]v = 16.57 m/s[/tex]

Applying the equation o motion

             [tex]v_f = v + 2 a s[/tex]

Now the final velocity is zero because the person comes to rest

      So

         [tex]0 = 16.57 + 2 * a * 1.8[/tex]

            [tex]a = - \frac{16.57^2 }{2 * 1.8}[/tex]

            [tex]a = - 76.27 m/s^2[/tex]

Answer: A. Balloons can be filled with air.

C. Air has mass.

Explanation:

Learn more https://brainly.com/question/3238218

Balloons are able to be filled with air and air has mass.

Answer:

b) 20 kJ

Explanation:

Efficiency of carnot engine = (T₁ - T₂ ) / T₁  Where T₁ is temperature of hot source  and T₂ is temperature of sink .

T₁ = 270 + 273 = 543K

T₂ = 50 + 273 = 323 K

Putting the given values of temperatures

efficiency = (543 - 323) / 543

= .405

heat input = 50 KJ

efficiency = output work / input heat energy

.405 = output work / 50

output work = 20.25 KJ.

= 20 KJ .

Answer:

The answer is A

Explanation:

Independent variables don't have to depend on other factors of the experiment because they're independent

Answer:

A.

Explanation:

Independent variables don't have to depend on other factors of the experiment because they're independent.

Answer:

Answer: the true statement form the given statements is “the athletes is not doing any work because he does not move weight”

Explanation:

The athlete isn’t doing any work because he doesn’t move the weight is the correct statement.

Here ,

Hence there is no work done by the athlete

Therefore ,The athlete isn’t doing any work because he doesn’t move the weight is the correct statement

Learn more about Work done here

https://brainly.com/question/25573309

#SPJ2

Answer:

The Object will immediately begin moving toward the left

Explanation:

Because the force of thirteen is greater than ten and applied to the opposite side

Answer:

The magnetic field at the center of the coil = 5.23 * 10 ^ -5 T

Explanation:

Information from the question:

Number of turns of the coil = 100 turns

The diameter of the coil = 6 m

The radius of the coil = diameter / 2 = 3 m

The coil current = 2.5 A

Formula : The Magnetic field at the center of the coil =

                                  k * number of turns * current / 2 * radius

Therefore, The Magnetic field at the center of the coil=

                                 (4 * [tex]\pi[/tex] * 10 ^ -7 * 100 * 2.5 ) / (2 * 3)

The Magnetic field at the center of the coil = 5.23 * 10 ^ -5 T

Answer: R.A.M

Explanation:

Answer:

A) 0.188

B) 53.1 ⁰

Explanation:

taking moment about 0

∑ Mo = Lo∝

mg 1/2 sin∅ = 1/3 m L^2∝

note ∝ = w[tex]\frac{dw}{d}[/tex]∅

forces acting along t-direction ( ASSUMED t direction)

∑ Ft = Ma(t) = mr∝

mg sin ∅ - F = m* 1/2 * 3g/2l sin∅

therefore F = mg/4 sin∅

forces acting along n - direction ( ASSUMED n direction)

∑ Fn = ma(n) = mr([tex]w^{2}[/tex])

= mg cos∅ - N = m*1/2*3g/1 ( 1 - cos∅ )

hence N = mg/2 ( 5cos∅ -3 )

A ) Angle given = 30⁰c find coefficient of static friction

∪ = F/N

  = [tex]\frac{\frac{mg}{4}sin30 }{\frac{mg}{2}(5cos30 -3) }[/tex]  = 0.188

B) when there is no slip

N = O

   = 5 cos ∅ -3 =0

   therefore cos ∅ = 3/5  hence ∅ = 53.1⁰

Answer:

L= 276.4 mm

Explanation:

Given that

E= 180 GPa

d= 3.7 mm

F= 1890 N

ΔL= 0.45 mm

We know that ,elongation due to load F in a cylindrical bar is given as follows

[tex]\Delta L =\dfrac{FL}{AE}[/tex]

[tex]L=\dfrac{\Delta L\times AE}{F}[/tex]

Now by putting the values in the above equation we get

[tex]L=\dfrac{0.45\times 10^{-3}\times \dfrac{\pi}{4}\times (3.7\times 10^{-3})^2\times 108\times 10^9}{1890}\ m[/tex]

L=0.2764 m

L= 276.4 mm

Therefore the length of the specimen will be 276.4 mm

Answer:

Explanation:

Force between two charges of q₁ and q₂ at distance d is given by the expression

F = k q₁ q₂ / d₂

Here force between charge q₁ = - 15 x 10⁻⁹ C and q₃ = 47 x 10⁻⁹ C when distance between them d = (1.66 - 1.24 ) = .42 mm

k = 1/ 4π x 8.85 x 10⁻¹²

putting the values in the expression

F = 1/ 4π x 8.85 x 10⁻¹²  x - 15 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 9 x 10⁹ x  - 15 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 35969.4 x 10⁻³ N .

force between charge q₂ =  34.5 x 10⁻⁹ C and q₃ = 47 x 10⁻⁹ C when distance between them d = ( 1.24 - 0 ) = 1.24 mm .

putting the values in the expression

F = 1/ 4π x 8.85 x 10⁻¹²  x  34.5 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 9 x 10⁹ x  - 34.5 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 82729.6  x 10⁻³ N

Both these forces will act in the same direction towards the left (away from the origin towards - ve x axis)

Total force = 118699 x 10⁻³

= 118.7 N.

Answer:

Mass

Explanation:

Mass is the measure of amount of matter contained within any substance and hence mass determines the weight. Unit of mass is kilogram as per ISI system of units.  

Mass is measured through a balance. The more is the mass of an object, the more the balance tilts towards the object side.  

Weight is equal to product of mass and the gravitational constant i.e 9.8m/s^2

Answer:

(a) Ra = 9.25 kN; Rb = 5.75 kN

(b) 26.7 kN

Explanation:

(a) Draw a free-body diagram of the crane.  There are four forces:

Reaction Ra pushing up at A,

Reaction Rb pushing up at B,

Weight force 12.5 kN pulling down at G,

and weight force 2.5 kN pulling down at F.

Sum of moments about B in the counterclockwise direction:

∑τ = Iα

-Ra (0.66 m + 0.42 m + 2.52 m) + 12.5 kN (2.52 m + 0.42 m) − 2.5 kN ((3.6 m + 0.9 m) cos 30° − 2.52 m) = 0

-Ra (3.6 m) + 12.5 kN (2.94 m) − 2.5 kN (1.38 m) = 0

Ra = 9.25 kN

Sum of moments about A in the counterclockwise direction:

∑τ = Iα

Rb (0.66 m + 0.42 m + 2.52 m) − 12.5 kN (0.66 m) − 2.5 kN ((3.6 m + 0.9 m) cos 30° + 0.66 m + 0.42 m) = 0

Rb (3.6 m) − 12.5 kN (0.66 m) − 2.5 kN (4.98 m) = 0

Rb = 5.75 kN

Alternatively, you can use sum of the forces in the y direction as your second equation.

∑F = ma

Ra + Rb − 12.5 kN − 2.5 kN = 0

Ra + Rb = 15 kN

9.25 kN + Rb = 15 kN

Rb = 5.75 kN

However, you must be careful.  If you make a mistake in the first equation, it will carry over to this equation.

(b) At the maximum weight, Ra = 0.

Sum of the moments about B in the counterclockwise direction:

∑τ = Iα

12.5 kN (2.52 m + 0.42 m) − F ((3.6 m + 0.9 m) cos 30° − 2.52 m) = 0

12.5 kN (2.94 m) − F (1.38 m) = 0

F = 26.7 kN

Answer:

There will be no change in the angular momentum of the system.

Explanation:

Total angular momentum of the system  will remain unchanged . We can apply law of conservation of momentum because no external torque is acting on the system . There is increase in the momentum of inertia due to dropping of ball of putty . In order to conserve angular momentum , the system decreases its angular velocity . Hence the final angular momentum remains unchanged .  

Answer:

The current pass the [tex]R_2[/tex] is  [tex]I = 0.25 A[/tex]

Explanation:

The diagram for this question is shown on the first uploaded image  

From the question we are told that

    The voltage  is  [tex]V = 3V[/tex]

     The first resistance is  [tex]R_1 = 7 \Omega[/tex]

     The second resistance is  [tex]R_2 = 5 \Omega[/tex]

Since the resistors are connected in series their equivalent resistance is  

       [tex]R_{eq} = R_1 +R_2[/tex]

Substituting values

         [tex]R_{eq} = 7 + 5[/tex]

         [tex]R_{eq} = 12 \Omega[/tex]

Since the resistance are connected in serie the current passing through the circuit  is the same current passing through [tex]R_2[/tex] which is mathematically evaluated as

        [tex]I = \frac{V}{R_{eq}}[/tex]

Substituting values  

      [tex]I = \frac{3}{12}[/tex]

      [tex]I = 0.25 A[/tex]

Answer:

A i. E = 9.62 × 10⁻⁷ J/s

ii. The absorbed dose is 4.81 × 10⁻⁶ Gy

iii. The equivalent dose is  3.37 × 10⁻⁴ rem/s

iv.  t = 593471.81 seconds

B. i. 4.025 × 10¹⁵/s

ii. 0.512 mW

C. 7218092.2 seconds

D. i. 6.3 × 10⁻¹ J

ii. 1.4 × 10⁻² W

iii. 1.57 × 10³ Curie

E. 0.129 Ω

Explanation:

The given parameters are;

Mass of tumor = 0.20 kg

Activity of Cobalt-60 = 2.60 × 10⁻⁴ Ci

Photon energy = 1.25 MeV

(i) The energy, E, delivered to the tumor is given by the relation;

[tex]E = \frac{1}{2}\left (Number \, of \, decay / seconds \right )\times \left (Energy \, of \, photon \right )[/tex]

[tex]E = \frac{1}{2}\left (2.6\times 10^{-4}Ci )\times \left (\frac{3.70\times 10^{10}decays/s}{1 Ci} \right )\times 1.25\times 10^{6}eV\times \frac{1.6\times 10^{-19}J}{1eV}[/tex]

E = 9.62 × 10⁻⁷ J/s

(ii) The equation for absorbed dose is given as follows;

Absorbed dose, D, in Grays Gy = (Energy Absorbed Joules J)/Mass kg

Therefore, absorbed dose = (9.62 × 10⁻⁷ J/s)/( kg) = 4.81 × 10⁻⁶ Gy

1 Gray = 100 rad

4.81 × 10⁻⁷ Gy = 100 × 4.81 × 10⁻⁶ = 4.81 × 10⁻⁴ rad/s

(iii) Equivalent dose, H, is  given by the relation;

H = D × Radiation factor, [tex]w_R[/tex]

∴ H = 0.7 × 4.81 × 10⁻⁴ rad/s = 3.37 × 10⁻⁴ Sv = 3.37 × 10⁻⁴ rem/s

(iv) The exposure time required for an equivalent dose of 200 rem is given as follows;

[tex]\dot{H} = \dfrac{H}{t}[/tex]

Therefore;

[tex]t= \dfrac{200}{{3.37 \times 10^{-4}} } = 593471.81 \, s[/tex]

∴ t = 6.9 days

B. The number of electrons ejected is given by the relation;

[tex]N = \frac{P}{E} = \frac{P \times \lambda}{hc}[/tex]

[tex]N = \dfrac{2.0 \times 10^{-3} \times 400 \times 10^{-9}}{6.626 \times 10^{-34} \times 3 \times 10^8} = 4.025 \times 10^{15}/s[/tex]

(ii) The power carried by the electron

The energy carried away by the electrons is given by the relation;

[tex]KE_e = hv - \Phi[/tex]

[tex]KE_e = \frac{6.626 \times 10^{-34} \times 3 \times 10^8}{400 \times 10^{-9}} - 2.31 \times \frac{1.6 \times 10 ^{-19} }{1}[/tex]

[tex]KE_e = 4.9695 \times 10^{-19} - 3.696 \times 10 ^{-19} = 1.2735 \times 10^{-19} J[/tex]

Power, P[tex]_e[/tex], carried away by the electron = 4.025 × 10¹⁵ × 1.2735 × 10⁻¹⁹ = 0.512 mW

C. The given parameters are;

d = 1.19 mm, ∴ r = 1.19/2 = 0.595 × 10⁻³ m

l = 50 mm = 5 × 10⁻³ m

V = 500 ml = 5 × 10⁻⁴ m³

η = 0.0027 Pa

p = 1,900 Pa.

[tex]\dfrac{V}{t} = \dfrac{\pi }{8} \times \dfrac{P/l}{\eta } \times r^4[/tex]

[tex]t = \dfrac{8\times \eta\times V\times l }{\pi \times P \times r^4}[/tex]

[tex]t = \dfrac{8\times 0.0027 \times 5 \times 10^{-4} \times 5 \times 10^{-2} }{\pi \times 1900 \times (0.595 \times 10^{-4} )^4}[/tex]

t = 7218092.2 seconds

D) i. Energy absorbed is given by the relation;

E = m×D

Where:

D = 35 Gray = 35 J/kg

m = 18 g = 18 × 10⁻³ kg

∴ E = 35 × 18 × 10⁻³ = 6.3 × 10⁻¹ J

ii. Total time for treatment = 15 × 5 = 75 minutes

Energy absorbed = 6.3 × 10⁻¹ × 100 = 63 J

Power = Energy(in Joules)/Time (in seconds)

∴ Power = 63/(75×60) = 1.4 × 10⁻² W

iii. Whereby the power is provided by 0.5% of the photons emitted by the source, we have;

[tex]P_{source}= \frac{P_{beam}}{0.005} =\frac{0.0014}{0.005} =0.28 \, W[/tex]

1 MeV = 1.60218 × 10⁻¹³ J

0.03 MeV = 0.03 × 1.60218 × 10⁻¹³ J = 4.80654 × 10⁻¹⁵ J/photon

Therefore, the number of disintegration per second = 0.28 J/s ÷  4.80654 × 10⁻¹⁵ J/photon = 5.83 × 10¹³ disintegrations per second

1 Curie = 3.7 × 10¹⁰  disintegrations per second

Hence, 5.83 × 10¹³ disintegrations per second = (5.83 × 10¹³)/(3.7 × 10¹⁰) Curie

= 1.57 × 10³ Curie

E. The parameters given are;

Density of water = 1000 kg/m³

Volume of water = 250 ml = 0.00025 m³

Initial temperature, T₁, = 25°C

Final temperature, T₂, = 100°C

Change in temperature, ΔT = 100 - 25 = 75°

Specific heat capacity of the water = 4200 J/kg/°C

Mass of water = Density × Volume = 1000 × 0.00025 = 0.25 kg

∴ Heat supplied = 4200 × 0.25 × 75 = 78,750 J

Time to heat the water = 45.0 sec

Therefore, power = Energy/time = 78750/45 = 1750 W

The formula for electrical power = I²R =VI = V²/R

Therefore, where V = 15.0 V, we have;

15²/R = 1750

R = 15²/1750 = 0.129 Ω.

The resistance of the heater = 0.129 Ω.

Answer:

3) False. It is expensive since it requires sophisticated equipment and very low temperatures

Explanation:

Nuclear magnetic resonance imaging measurements consist of magnetic resonance imaging to analyze tissues by the transition of the unpaired electron at carbon 13, giving information on the structure and composition of tissues. This information is processed in computers and transformed into images.

So the physical measurement is the MRN

Now we can analyze the statements in the problem

1) True by itself a magnetic measurement is non-invasive

2) True. Measuring carbon transitions has information about the soft tissue of the body

3) False. It is expensive since it requires sophisticated equipment and very low temperatures

4) Right. The applied magnetic field is high to be able to induce carbon transaction

Answer:

Here's your answer :

hope it helps!

Answer:

C. The left wire attracts the right wire and exerts as much force as the right wire does.

Explanation:

To know what is the answer you first take into account the magnetic field generated by each current, for a distance of d:

[tex]B_1=\frac{\mu_oI_1}{2\pi d}=\frac{\mu_o}{2\pi d}(1A)\\\\B_2=\frac{\mu_oI_2}{2\pi d}=\frac{\mu_o}{2\pi d}(2A)=2B_1\\\\[/tex]

Next, you use the formula for the magnetic force produced by the wires:

[tex]\vec{F_B}=I\vec{L}\ X \vec{B}[/tex]

if the direction of the L vector is in +k direction, the first wire produced a magnetic field with direction +y, that is, +j and the second wire produced magnetic field with direction -y, that is, -j (this because the direction of the magnetic field is obtained by suing the right hand rule). Hence, the direction of the magnetic force on each wire, produced by the other one is:

[tex]\vec{F_{B1}}=I_1L\hat{k}\ X\ B_2(-\hat{j})=I_1LB_2\hat{i}=(2A^2)\frac{L\mu_o}{2\pi d}\hat{i}\\\\\vec{F_{B2}}=I_2L\hat{k}\ X\ B_2(\hat{j})=I_2LB_1\hat{i}=-(2A^2)\frac{L\mu_o}{2\pi d}\hat{i}[/tex]

Hence, due to this result you have that:

C. The left wire attracts the right wire and exerts as much force as the right wire does.

Answer:

A fan pushes hot air out of a vent and into a room. The hot air displaces cold air in the room, causing the cold air to move closer to the floor.

The hot air displacing the cold air is an example of  transfer by

Explanation:

Answer:

Check the explanation

Explanation:

Kindly check the attached image below to see the step by step explanation to the question above.

Answer:

Mercury is rocky

Explanation:

Answer:

Rocky

Explanation:

It has no atmosphere so it cannot hold gas.

Answer:

Explanation:

Emf e generated in a coil with no of turn n and area A rotating in a magnetic field B  with angular speed of ω is given by the expression

e = e₀ sinωt

where e₀ = nωAB which is the maximum emf generated

Putting the given values

15.7 = 1000xω x 20 x 10⁻² x 5

ω = .0157

frequency of rotation

= ω / 2π

= .0157 / 2 x 3.14

= .0025 /s

9 rotation / hour .

Answer:

Explanation:

The problem is based on Newton's law of cooling .

According to Newton's law

dQ / dt = k ( T - T₀ ) ,

dT / dt = k' ( T - T₀ )          ; dT / dt is rate of fall of temperature.

T is average  temperature of hot body , T₀ is temperature of surrounding .

In the first case rate of fall of temperature = (210 - 191) / 2.5

= 7.6 degree / s

average temperature T = (210 + 191) /2

= 200.5  

Putting in the equation

7.6 = k' ( 200.5  - 64 )

k' = 7.6 / 136.5

= .055677

In the second case :---

In the second case, rate of fall of temperature = (191 - 156) / t  

= 35 / t   , t is time required.

average temperature T = (156 + 191) /2

= 173.5  

Putting in the equation

35 / t = .05567 ( 173.5 - 64 )

t = 5.74 minute .