which molecule has 9 carbon atoms

Answer:

Four common types of reactions involving carbonyl reactions: 1) nucleophilic addition; 2) nucleophilic acyl substitution; 3) alpha substitution; 4) carbonyl condensations. The first two were previously discussed and the second two involve the properties of the carbon directly adjacent to the carbonyls, α carbons.

Alpha-substitution reactions results in the replacement of an H attached to the alpha carbon with an electrophile.  

The nucleophile in these reactions are new and called enols and enolates.

Explanation:

The carbon in the carbonyl is the reference point and the alpha carbon is adjacent to the carbonyl carbon.  

Hydrogen atoms attached the these carbons denoted with Greek letters will have the same designation, so an alpha hydrogen is attached to an alpha carbon.  

Aldehyde hydrogens not given Greek leters.  

α hydrogens display unusual acidity, due to the resonance stabilization of the carbanion conjugate base, called an enolate.  

Tautomers are readily interconverted constitutional isomers, usually distinguished by a different location for an atom or a group, which is different than resonance.  

The tautomerization in this chapter focuses on the carbonyl group with alpha hydrogen, which undergo keto-enol tautomerism.  

Keto refers to the tautomer containing the carbonyl while enol implies a double bond and a hydroxyl group present in the tautomer.  

The keto-enol tautomerization equilibrium is dependent on stabilization factors of both the keto tautomer and the enol tautomer, though the keto form is typically favored for simple carbonyl compounds.  

The 1,3 arrangement of two carbonyl groups can work synergistically to stabilize the enol tautomer, increasing the amount present at equilibrium.

The positioning of the carbonyl groups in the 1,3 arrangement allows for the formation of a stabilizing intramolecular hydrogen bond between the hydroxyl group of the enol and the carbonyl oxygen as well as the alkene group of the enol tautomer is also conjugated with the carbonyl double bond which provides additional stabilization.

Aromaticity can also stabilize the enol tautomer over the keto tautomer.

Under neutral conditions, the tautomerization is slow, but both acid and base catalysts can be utilized to speed the reaction up.  

Biological enol forming reactions use isomerase enzymes to catalyze the shifting of a carbonyl group in sugar molecules, often converting between a ketose and an aldose in a process called carbonyl isomerization.

Answer:

Its atomic number is 14 and its atomic mass is 28. The most common isotope of uranium has 92 protons and 146 neutrons. Its atomic number is 92 and its atomic mass is 238 (92 + 146).

Answer:

I do not speak Spanish.

Explanation:

Answer:

Option C (a higher; the same) is the appropriate response.

Explanation:

Given:

Temperature,

T = 300 K (both [tex]N_2[/tex] and [tex]H_2[/tex])

As we know,

Average speed of a molecule,

⇒ [tex]\bar v=\sqrt{\frac{8RT}{\pi M} }[/tex]

Thus, the average speed of [tex]N_2[/tex] will be lower as its molar mass is greater than [tex]H_2[/tex].

Now,

⇒ [tex]Average \ kinetic \ energy = \frac{3}{2} \ KT[/tex] (not depend on molar mass)

Hence, it will be the same.

The other three alternatives aren't connected to the scenario given. So the above is the correct answer.

Explanation:

The chemical formula of an ionic compound can be written by using the symbols of the respective cations and anions.

The overall charge on the molecule should be zero.

Hence, the total charge of cations=total charge of anions.

The symbols of the given molecules are shown below:

sodium chloride  ---- NaCl

magnesium chloride ---[tex]MgCl_2[/tex]

calcium oxide ---- CaO

lithium phosphide----[tex]Li_3P[/tex]

aluminum sulfide ----- [tex]Al_2S_3[/tex]

calcium nitride---- [tex]Ca_3N_2[/tex]

The question is incomplete, the complete question is;

Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon

a) electronic excitation

b) bond breakage

c) molecular vibration

d) molecular rotation

Answer:

molecular rotation

Explanation:

Microwaves are part of the electromagnetic spectrum. They are lower energy, lower frequency radiation.

When molecules absorb infrared radiation, they transition between the rotational states of the molecule.

Hence, the highest energy molecular process that occurs when a molecule absorbs a microwave photon is molecular rotation.

Answer:

See explanation

Explanation:

Sugar is a polar crystalline substance. The sugar crystal is capable of dissolving in water since it is polar.

When sugar dissolves in water, a sugar solution is formed. If I want to separate the sugar from the water in the solution, I have to boil the solution to a very high temperature.

When I do that, the water in the sugar solution is driven off and the pure sugar crystal is left behind.

Explanation:

Given the mass of HCl is ---- 0.50 g

The volume of solution is --- 4.0 L

To determine the pH of the resulting solution, follow the below-shown procedure:

1. Calculate the number of moles of HCl given by using the formula:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}[/tex]

2. Calculate the molarity of HCl.

3. Calculate pH of the solution using the formula:

[tex]pH=-log[H^+][/tex]

Since HCl is a strong acid, it undergoes complete ionization when dissolved in water.

[tex]HCl(aq)->H^+(aq)+Cl^-(aq)[/tex]

Thus, [tex][HCl]=[H^+][/tex]

Calculation:

1. Number of moles of HCl given:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}\\=0.50g/36.5g/mol\\=0.0137mol[/tex]

2. Concentration of HCl:

[tex]Molarity of HCl=\frac{number of moles of HCl}{its molar mass}\\=\frac{0.0137 mol}{4.0 L} \\= 0.003425 M[/tex]

3. pH of the solution:

[tex]pH=-log[H^+]\\=-log(0.003425)\\=2.47[/tex]

Hence, pH of the given solution is 2.47.

Molar mass of Acetone

Now

Moles of Acetone:-

Amount of heat:-

Answer:

Explanation:

The reaction between dimethyl malonate which is an active methylene group with an (∝, β-unsaturated carbonyl compound) i.e methyl vinyl ketone is known as a Micheal Addition reaction. The reaction mechanism starts with the base attack on the β-carbon to remove the acidic ∝-hydrogens and form a carbanion. The carbanion formed(enolate ion) attacks the methyl vinyl ketone(i.e. a nucleophilic attack at the β-carbon) to give a Micheal addition product, this is followed by the protonation to give the neutral product.

Answer:

Cu+(aq)--->Cu2+(aq) + e- : oxidation

reason: there is loss of electrons.

I2(s) + 2e--->2I-(aq) : reduction

reason: There is reduction of electrons.

Answer:

1.27 × 10⁵ L

Explanation:

Step 1: Given data

Step 2: Convert the temperatures to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 21 °C + 273.15 = 294 K

K = -48 °C + 273.15 = 225 K

Step 3: Calculate the final volume of the balloon

We will use the combined gas law.

P₁ × V₁ / T₁ = P₂ × V₂ / T₂

V₂ = P₁ × V₁ × T₂/ T₁ × P₂

V₂ = 745 Torr × 1.41 × 10⁴ L × 225 K/ 294 K × 63.1 Torr

V₂ = 1.27 × 10⁵ L

Answer:

[tex]d=4.24x10^{-4}\frac{lb}{in^3}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set the equation for the calculation of density and mass divided by volume:

[tex]d=\frac{m}{V}[/tex]

Thus, we can find the mass of the unknown by subtracting the total mass of the liquid to the mass of the flask and the liquid:

[tex]m=552.4g-464.7g=87.7g[/tex]

So that we are now able to calculate the density in g/mL first:

[tex]d=\frac{87.7g}{27.8mL}=3.15g/mL[/tex]

Now, we proceed to the conversion to lb/in³ by using the following setup:

[tex]d=3.15\frac{g}{mL}*\frac{1lb}{453.6g}*\frac{1in^3}{16.3871mL}\\\\d=4.24x10^{-4}\frac{lb}{in^3}[/tex]

Regards!

Answer:

Fe(s)->Fe2+2e-

Explanation:

A.p.e.x

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

Oxidation reaction is a chemical reaction which can be described as follows ;

In the given reaction ;

Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)

Fe at RHS got converted to Fe²⁺ state at LHS which shows the gain of electron by Fe with in the reaction.

Therefore,

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

Learn More about redox reaction here ;

https://brainly.com/question/13978139

#SPJ2

Answer:

A: ΔH

Explanation:

Endothermic reactions are this that occur as a result of absorption of heat energy from the surroundings by the reactants to form new products.

Thus, we can say it is one with an increase in enthalpy (ΔH) of the system.

Thus, option A is correct.

Answer:

Explanation:

CCl4 => C + 2Cl2

Answer:

The pH is greater than 7 at the equivalence point.

Explanation:

Equivalence point is the point where the acid reacts with the base as stipulated in the equation of the reaction.

When a weak acid and a strong base are titrated, the pH of the solution at equivalence point is actually found to be around about pH ~ 9.

Hence, for a weak acid and strong base titration, The pH is greater than 7 at the equivalence point.

A titration between a weak acid and a strong base yields a solution whose pH is greater than 7 at the equivalence point.

Weak acids are acids which only ionize partially in aqueous solutions.

When weak acids are dissolved in water, they produce only few hydrogen ions.

A strong base on the other hand ionizes completely to produce hydroxide ions in aqueous solutions.

The titration of a weak acid and a strong base gives a solution whose pH is greater than 7 at equivalence point.

Learn more about equivalence point at: https://brainly.com/question/18933025

Answer:

I think option A is right answer

Answer:

Al^3+

Explanation:

Solubility rules tell us what substances are soluble in water. Since NaCl was added and no precipitate was observed, the mercury II ion is absent.

Addition of Na2SO4 does not form a precipitate meaning that Ba^2+ is absent.

If a precipitate is formed when NaOH is added, the the ionic reaction is as follows;

Al^3+(aq) + 3 OH^-(aq) ------> Al(OH)3(s)

Answer:

5.25 moles of protons. Option e

Explanation:

Reaction between phosphoric acid and sodium hydroxide is neutralization.

We can also say, we have an acid base equilibrium right here:

H₃PO₄  +  3NaOH →  Na₃PO₄  +  3H₂O

Initially we have 5.25 moles of base.

We have data from the acid, to state its moles:

M = mol/L, so mol = M . L

mol = 1.75 moles of acid

If we think in the acid we know:

H₃PO₄  →  3H⁺  +  PO₄⁻³

We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)

If we have 1.75 moles of acid, we may have

(1.75 . 3) /1 = 5.25 moles of protons

These moles will be neutralized by the 5.25 moles of base

H₃O⁺  +  OH⁻  ⇄  2H₂O     Kw

In a titration of a weak acid and a strong base, we have a basic pH

Answer:

C). Half-reactions with SRP values greater than zero are spontaneous.

Explanation:

SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.

The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.

Answer:

1. 1.00 gm

2. 50 ml

3. 38.93 ml

4. 11.07 ml

5. 0.01107 L

6. 0.010 moles / L

7. 0.0001107 moles

8. 0.0001107 moles

9. 0.00647042 grams

Explanation:

Silver nitrate can react with various compounds to form different products. The weight of products may be different from the original solution introduced due to combustion reaction, as heat energy is released during the chemical process.

Answer:

15.0 g

Explanation:

15.0% =0.150

100.0 g × 0.150= 15.0g

Sodium nitrate is "an inorganic compound with the formula of NaNO₃.

Inorganic compound is "a chemical compound that lacks carbon–hydrogen bonds".

15% = 0.15

100.0 g × 0.15= 15g

Hence, 15g of Sodium nitrate are needed to prepare 100 gms of a 15% by mass sodium nitrate.

To learn more about Sodium nitrate here

https://brainly.com/question/24256699

#SPJ2

Answer:

no

Explanation:

Fluoride is not nucleophilic (having the tendency to donate electrons) enough to allow for the use of HF to cleave ethers in protic media(protic solvents are polar liquid compounds that have dissociable hydrogen atoms). The rate of reaction is comparably low, so that heating of the reaction mixture is required.

Answer:

Following are the solution to the given points:

Explanation:

For point A:

For point B:

In point 3, the mixture was added to 100°C, which implies that the granular material flows and deforms, enabling it to become elongated. This is termed solid-state crystalline such that grains are flexible, but this material contaminates numerous little crystalline that has spheres when we cool down in point  4 polymers. It forms therefore an unstructured solid, which then in point 4 is higher in particles and less pliable in orderly atoms.

For point C:

In point 2, the specimen gets forced at room temperature to organize a huge molecule in an ordinary and crystal fashion and therefore is transparent due to highly crystalline atoms in point 2 of the PET sample.

In point 4, however, we notice how amorphous, firm but not crystalline develops. It's why light tends to disperse over many cereal limits, since many microscopic crystallines, therefore dispersion, PET in point 4 is translucent.

Explanation:

The structures of both acetone and propanal are shown below:

In the formula of propanal there is -CHO functional group at the end.

In acetone -CO- group is present in the middle that is on the second carbon.

The molecular formula is C3H6O.

Both have same molecular formula but different structural formulas.

Answer:

The correct approach is "12.25°C".

Explanation:

Given:

Mass of lead,

mc = 245 g

Initial temperature,

tc = 300°C

Mass of Aluminum,

ma = 150 g

Initial temperature,

ta = 12.0°C

Mass of water,

mw = 820 g

Initial temperature,

tw = 12.0°C

Now,

The heat received in equivalent to heat given by copper.

The quantity of heat = [tex]m\times s\times t \ J[/tex]

then,

⇒ [tex]245\times .013\times (300-T) = 150\times .9\times (T-12.0) + 820\times 4.2\times (T-12.0)[/tex]

⇒             [tex]3.185(300-T) = 135(T-12.0) + 3444(T-12.0)[/tex]

⇒             [tex]955.5-3.185T=135T-1620+3444T-41328[/tex]

⇒                         [tex]43903.5 = 3582.185 T[/tex]

⇒                                  [tex]T = 12.25^{\circ} C[/tex]

Answer:

89,6/22,4 =4(mol)

Explanation:

There are approximately 1.089 moles of oxygen gas present in the sample at STP.

At STP (Standard Temperature and Pressure), the conditions are defined as follows:

Temperature (T) = 0 degrees Celsius = 273.15 Kelvin

Pressure (P) = 1 atmosphere (atm) = 101.325 kPa = 1013.25 hPa

Now, to find the number of moles of oxygen gas (O2) present in the sample, we can use the ideal gas law:

PV = nRT

Where:

P = pressure (in atm)

V = volume (in liters)

n = number of moles

R = ideal gas constant = 0.0821 L.atm/(mol.K)

T = temperature (in Kelvin)

Given:

V = 89.6 L (volume at STP)

T = 273.15 K (STP temperature)

Let's plug in the values and solve for n (number of moles):

n = PV / RT

n = (1 atm) × (89.6 L) / (0.0821 L.atm/(mol.K) × 273.15 K)

n = 1.089 moles

So, there are approximately 1.089 moles of oxygen gas present in the sample at STP.

To know more about oxygen gas:

https://brainly.com/question/31842859

#SPJ2

Answer:

5×6.02×1023

Explanation:

there are 5×6.02×1023 molecules of p4010 in 5mole. there are four P atoms in a single molecule of p4010