By dividing 20 by 0 we can calculate the x-coordinate of the midpoints of a horizontal line segment with endpoints at (0,0) and (20,0).
I'll omit the "y" values from another midpoint calculation as we're only working with x coordinates right now. Although I could build the midway formula, it is much simpler to understand what it means.
The centre, which would be the average of the alignment, should always be known whenever a line's midway is determined. The same average is determined by adding the two integers and then dividing the result by two.
Learn more about line segment here:
https://brainly.com/question/30072605
#SPJ1
Nuclear reactions in main sequence stars take place ___________________________, where the gas is hot and dense.
Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense.
What is a nuclear reaction?A nuclear reaction is a process in which atomic nuclei are modified, which changes the chemical properties of an atom. A nuclear reaction can result in the release or absorption of energy. The transmutation of nuclei, the creation of nuclei, or the splitting of nuclei are all examples of nuclear reactions. Nuclear reactions can be brought about by a variety of means, including natural radioactive decay, nuclear fission, and nuclear fusion.Nuclear reactions in main sequence stars take place in their cores, where the gas is hot and dense. In their core, high temperatures and pressures produce nuclear fusion. The process of nuclear fusion involves the conversion of hydrogen into helium, which releases a large amount of energy. This energy is responsible for the star's radiance and heat.
Learn more about nuclear reaction here: https://brainly.com/question/1420545
#SPJ11
true or false lithofication is the process in which two plates move towards each other and the denser one slides below the other.
The statement "lithification is the process in which two plates move towards each other and the denser one slides below the other" is False because lithification refers to the process in which sediment is compacted and cemented together to form sedimentary rock.
What is lithification?Lithification is the process by which sedimentary rocks are formed. It is a transformation process that involves the compaction and cementation of sediment to produce solid rock from loose sediment. The process of lithification results in the creation of sedimentary rocks from sediments such as clay, silt, sand, and gravel.
How does lithification occur?Lithification occurs in three stages:
Compaction of Sediments - This occurs when the weight of overlying sediment squeezes the water out of the sediments beneath it. As a result, the sediment becomes denser, and the grains are packed closer together.
Cementation of Sediments - Cementation occurs when mineral crystals are deposited in the small spaces between the sediment grains, gluing them together to create solid rock.
Sedimentary Rocks - Sedimentary rocks are formed when the compacted and cemented sediment becomes hard and forms rock.
Thus, the statement, "Lithification is the process in which two plates move towards each other and the denser one slides below the other," is false.
Learn more about Lithification here: https://brainly.com/question/1446935
#SPJ11
What happen to the surface area of exposed rock if a rock is fractured?
A) there are more pieces, but the surface area does not change
B) The surface area does not change because the volume does not change
C) The surface area increases as the rock is fractured
D) The surface area decreases as the rock is fractured
E) both a and b
The surface area increases as the rock is fractured. Therefore the correct option is option C.
Rock fracture is the mechanical breakdown of rock due to stress. The stress can be tectonic or man-made, such as blasting. When rock fractures, it breaks into smaller pieces, which are known as rock fragments or rock blocks. Rock fracture has a significant impact on the surface area of rock.
When rock is fractured, the surface area of the rock increases. This is because a single rock breaks into smaller fragments, each with its own surface area.
Therefore, the correct answer to the given question is: The surface area increases as the rock is fractured.
For such more question on fractured:
https://brainly.com/question/27854952
#SPJ11
The taiga biome has long, cold, dry winters and cool, wet summers. In three to four sentences, describe how the plants and animals would be impacted by a warm and dry summer and how they might survive. Support your answer with the abiotic factors in the biome.
A warm and dry summer would make it harder for most animals to survive since fewer plants would grow. When the temperatures drop, some animals will hibernate so that they don't starve due to the lack of plants. Other animals have thick hair to fight cold and can dig well to hunt hibernating animals like how foxes dig for rodents under the snow.
which national park is home to a large volcanic caldera?Yellowstone National ParkAniakchak Caldera in Aniakchak National Monumenlake toba
Yellowstone National Park is home to a large volcanic caldera because it is situated on top of a "hot spot" in the Earth's mantle, where a column of molten rock rises from its interior towards the surface.
The correct answer is Yellowstone National Park.
This hot spot has been active for millions of years, causing volcanic activity that has led to the caldera's formation. The most recent major eruption occurred approximately 640,000 years ago, creating the current caldera, and numerous more minor eruptions have occurred since then.
Yellowstone National Park, located primarily in the US state of Wyoming, was established in 1872 and is considered the first national park in the world. The park is known for its geothermal features, such as geysers, hot springs, and mud pots, caused by volcanic activity underneath the surface.
To know more about Yellowstone National Park, visit:
https://brainly.com/question/4031039
#SPJ4
Complete the description of convergent evolution Match the terms in the left column to the appropriate blanks on the right. Terms can be used once, more than once, or not at all. Reset Help analogous features in distantly Convergent evolution is the evolution of lineages. It occurs when related organisms obtain a needs. Such resemblance is said to be that appeared convergently do not have a trait due to Therefore, species with traits dependent closely shared tralt common ancestor Independent different + similar homologous
Convergent evolution is the process of evolution in which unrelated or distantly related organisms evolve similar traits. This happens as a result of similar environmental pressures, causing the organisms to develop analogous features in order to survive.
Such resemblance is said to be homologous and is independent of any shared ancestry. Traits that appear convergently do not have a closely shared common ancestor, but are instead the result of similar needs resulting in similar traits being formed in different species.
Therefore, species with traits dependent on similar environmental pressures can develop similar characteristics, even if they are distantly related. This process helps to explain why similar features can be seen in distantly related species and helps to recognize the importance of environment over ancestry in the formation of traits.
Know more about Convergent evolution here
https://brainly.com/question/30637872#
#SPJ11
Identify at least three ways the mountain people of Nepal earn a living
The mountain people of Nepal, who live in remote areas with difficult terrain, have developed a variety of economic activities to sustain themselves and their families. Here are three ways they earn a living: agriculture, tourism, and trade
Agriculture: Farming is the primary occupation of mountain people in Nepal. They cultivate crops like rice, maize, millet, potatoes, and vegetables, using traditional farming practices such as terracing to maximize land use. They also raise livestock such as cows, goats, sheep, and yaks for meat, milk, and wool.
Tourism: Many mountain people in Nepal live near popular trekking routes, and they earn a living by providing services to tourists such as guides, porters, and homestay accommodations. They also sell handicrafts like traditional textiles, pottery, and jewelry to tourists.
Trade: Mountain people in Nepal often engage in trade with nearby villages or towns. They may collect and sell forest products such as herbs, honey, and timber, or trade goods like salt, tea, and clothing. Some mountain people also work as laborers in construction or transportation, building roads and bridges or carrying goods by pack animal or on foot.
To learn more about mountain people
https://brainly.com/question/29813178
#SPJ4
considering how magma composition, temperature, water content, and volatile content affect its viscosity, associate each of the volcanoes described in this activity with the type of eruption it should produce, or indicate whether the described characteristic is not related to eruption style. drag the appropriate items into their respective bins.
To answer this question, first we need to understand the factors that affect a volcano's eruption type. These factors are magma composition, temperature, water content, and volatile content. Based on these factors, we can associate each volcano with the type of eruption it should produce or indicate whether the described characteristic is not related to eruption style.
Volcano Magma Composition Temperature Water Content Volatile Content Eruption Type
A Felsic High Low High Explosive
B Intermediate High Moderate Moderate Explosive
C Mafic Low High Low Effusive
D Felsic High High High Explosive
As seen in the table above, we can associate each volcano with the type of eruption it should produce or indicate whether the described characteristic is not related to eruption style.
Volcano A has felsic magma composition, high temperature, low water content, and high volatile content. This combination of factors indicates that Volcano A should produce an explosive eruption.
Volcano B has intermediate magma composition, high temperature, moderate water content, and moderate volatile content. This combination of factors indicates that Volcano B should also produce an explosive eruption.
Volcano C has mafic magma composition, low temperature, high water content, and low volatile content. This combination of factors indicates that Volcano C should produce an effusive eruption.
Volcano D has felsic magma composition, high temperature, high water content, and high volatile content. This combination of factors indicates that Volcano D should also produce an explosive eruption.
Therefore, we can say that magma composition, temperature, water content, and volatile content are all important factors that determine a volcano's eruption type.
To know more about volcano eruption refer here:https://brainly.com/question/13467703#
#SPJ11
what land extends from central mexico to costa rica?
The land that extends from central Mexico to Costa Rica is called the Mesoamerican region.
The Mesoamerican region is a cultural and geographical area in the Americas, extending from central Mexico to Costa Rica. This region is known for its rich and diverse cultural history, including the rise and fall of ancient civilizations such as the Maya, Aztec, and Olmec.
According to archeological evidence, the Mesoamerican region is considered to be one of the six cradles of civilization in the world. This region has many natural resources, such as fertile land, forests, and minerals, which made it an attractive area for early civilizations to settle and flourish.
In summary, the land that extends from central Mexico to Costa Rica is called the Mesoamerican region. This region is known for its cultural and geographical significance and was home to ancient civilizations such as the Maya, Aztec, and Olmec.
For such more question on Mesoamerican:
https://brainly.com/question/9491507
#SPJ11
Identify from the following list possible environments or conditions that can lead to the formation of clay or silt deposits- chemical weathering of soils- windblown material generated by glaciers- floodplains of river systems- bottoms of lakes- wave action along a beach
Clay or silt deposits can be formed in different environments or conditions. These include floodplains of river systems, bottoms of lakes, wave action along a beach, chemical weathering of soils, and windblown material generated by glaciers.
The floodplains of river systems are environments where clay or silt deposits can form. River floods can carry a significant amount of silt and clay materials, and when the water slows down, these materials can settle and form deposits. This process can occur repeatedly over time, resulting in the accumulation of thick clay or silt layers.
Silt and clay deposits can also form in the bottoms of lakes. The deposition of silt and clay materials in lakes is usually influenced by the volume and velocity of water entering the lake and the nature of the lake basin. When silt and clay materials settle to the bottom of the lake, they can form thick layers over time.
The wave action along a beach can lead to the formation of clay and silt deposits. Wave action can move sediments along the shore and carry them offshore. When the waves slow down, the sediments can settle and form deposits.
Clay and silt deposits can also form due to the chemical weathering of soils. When minerals in the soil are exposed to water and oxygen, they can undergo chemical reactions that transform them into clay and silt materials.
The movement of glaciers can create windblown materials that can form clay or silt deposits. When glaciers move, they can grind rocks into fine-grained sediments. These sediments can be transported by wind and deposited in different environments to form clay and silt deposits.
Learn more about silt deposits at https://brainly.com/question/8395011
#SPJ11
which description of the earth's magnetic field is most accurate for a person living in champaign-urbana?
The magnetic field of the earth is measured using magnetic poles that are located at the earth's North and South Poles. The magnetic field of the earth is generated by the earth's molten core.
There are a few different ways in which the earth's magnetic field is measured. One of the most common ways is by using a magnetic field strength meter.
For a person living in Champaign-Urbana, the earth's magnetic field would be described as being generally weak. This is because Champaign-Urbana is located relatively close to the earth's equator.
As a result, the magnetic field is not as strong in this region as it is in regions closer to the earth's poles.
In general, the earth's magnetic field is weaker near the equator than it is near the poles. This is because the magnetic field lines are more spread out at the equator, and the magnetic field is less concentrated.
In contrast, near the poles, the magnetic field lines are more tightly packed together, and the magnetic field is more concentrated.
It is important to note that the strength of the earth's magnetic field can also be affected by a number of different factors, such as solar activity and changes in the earth's magnetic field itself.
As a result, the strength of the earth's magnetic field can vary somewhat over time.
In summary, the earth's magnetic field is generally weaker near the equator, which means that a person living in Champaign-Urbana would experience a relatively weak magnetic field.
However, the strength of the earth's magnetic field can also vary over time due to a number of different factors.
To know more about magnetic field here
https://brainly.com/question/14848188
#SPJ11
the difference between renewable and nonrenewable resources is that nonrenewable resources require
Answer:
Explanation:
The difference between renewable and nonrenewable resources is that nonrenewable resources require millions of years to form and are being depleted at a faster rate than they are being replenished, while renewable resources are replenished naturally and can be sustained over time. Nonrenewable resources include fossil fuels such as coal, oil, and natural gas, as well as minerals and metals that are mined from the earth. These resources are finite and once they are depleted, they cannot be replaced. In contrast, renewable resources include solar, wind, hydro, geothermal, and biomass energy, as well as resources such as timber, water, and crops that can be regrown or replenished naturally. These resources are replenished over time and can be sustained for future generations. The use of renewable resources is seen as a more sustainable and environmentally friendly approach to resource management, as they have a lower impact on the environment and can be used indefinitely without running out.
what happens on either side of the equilibrium line in a glacier?
Answer:
Above the equilibrium line, the glacier is in the accumulation zone where there is a net gain of ice mass. On the other hand, below the equilibrium line, the glacier is in the ablation zone where there is a net loss of ice mass due to melting and calving. As the glacier moves, it erodes the land around it in two ways: by plucking and abrasion. Plucking occurs when rocks get frozen to the base, sides, and back wall of the glacier, and the movement of the glacier pulls these frozen rocks away. Abrasion occurs when rocks trapped in the glacier rub against the valley floor, wearing it away like sandpaper.
Explanation:
The glacier equilibrium line is the point of transition between the accumulation zone and the ablation zone. Above the equilibrium line, the rate of snowfall is greater than the rate of melting, so not all of the snow that falls each winter melts during the following summer, and the ice surface is always covered with snow. Therefore, the part of a glacier above the equilibrium line is where there is a net gain of ice mass. As snow gradually accumulates above the equilibrium line, it is compressed and turned into firn within which t,he snowflakes lose their delicate shapes and become granules. With more compression, the granules are pushed together and air is squeezed out. Eventually, the granules are “welded” together to create glacial ice .
Below the equilibrium line, the rate of melting is greater than the rate of snowfall, so there is a net loss of ice mass due to melting and calving. Therefore, the part of a glacier below the equilibrium line is where there is a net loss of ice mass . The position of the equilibrium line changes from year to year as a function of the balance between snow accumulation in the winter and snowmelt during the summer. More winter snow and less summer melting obviously favors the advance of the equilibrium line (and of the glacier’s leading edge), but of these two variables, it is the summer melt that matters most to a glacier’s budget .
The terminus of a glacier advances or retreats based on the location of the equilibrium line. If the rate of forward motion of the glacier is faster than the rate of ablation (melting), the leading edge of the glacier advances (moves forward). If the rate of forward motion is about the same as the rate of ablation, the leading edge remains stationary, and if the rate of forward motion is slower than the rate of ablation, the leading edge retreats (moves backward) .
1) Which is the least developed region among the following? A) North America B) Eastern Europe C) Southwest Asia D) Western and Central Europe E) East Asia.
Southwest Asia, also known as the Middle East, is considered the least developed region because it has been plagued by political instability, conflicts, and wars for several decades, severely impacting its economic growth and development.
The correct option is C.
Many countries in the region heavily rely on oil and gas exports, making them vulnerable to global oil price fluctuations. And the region has a high poverty rate, particularly in countries like Yemen, Syria, and Iraq, which have been severely impacted by conflict and displacement.
The region faces significant environmental challenges, including water scarcity, desertification, and air pollution. The region's arid climate and overuse of water resources have led to water scarcity in many areas, negatively impacting agriculture and human health.
To know more about Southwest Asia, visit:
https://brainly.com/question/9697255
#SPJ4
which natural hazard occurs more often at active plate boundaries?
Answer:
The most often occurrence is volcanos.
Two types of plates, convergent and divergent can create an active volcano site.
based on this week's material match the following as best you can. group of answer choices crossed arms [ choose ] phoneme [ choose ] ebonics [ choose ] indo-european languages\
Crossed arms typically refer to the body language where an individual crosses their arms over their chest. It is often interpreted as a defensive or closed-off posture. However, it can also indicate that the person is comfortable or relaxed.
What is Phoneme?A phoneme is a unit of sound that distinguishes one word from another in a particular language. For example, the words "cat" and "bat" differ by only one phoneme, the initial sound /k/ versus /b/. Phonemes are the smallest units of sound in a language and can be combined to form words.
Ebonics, also known as African American Vernacular English (AAVE), is a dialect of English that is spoken by some African Americans. It includes unique grammatical structures, vocabulary, and pronunciation that differ from Standard English. It has been the subject of much debate and controversy, particularly in the education system, where some argue that it should be recognized as a distinct language and taught as such.
Indo-European languages are a family of languages that includes the majority of European languages, as well as many languages spoken in Asia. This language family is believed to have originated in the Pontic-Caspian steppe region around 4500 BCE and spread through migration and conquest. Some of the most widely spoken Indo-European languages include English, Spanish, French, German, Hindi, Bengali, and Russian.
Learn more about languages on;
https://brainly.com/question/10585737
#SPJ1
where is the kamchatka peninsula, home to 29 active volcanoes?
Answer:
Explanation:
The Kamchatka Peninsula is located in the far eastern part of Russia, in the Russian Far East. It is situated between the Sea of Okhotsk to the west and the Pacific Ocean to the east. The Kamchatka Peninsula is known for its stunning natural beauty, abundant wildlife, and numerous active volcanoes, with a total of 29 active volcanoes located on the peninsula.
which of the following are true of eastern boundary currents? choose all that apply. view available hint(s)for part d which of the following are true of eastern boundary currents?choose all that apply. deep, as compared to western boundary currents wide, as compared to western boundary currents they flow along the more gradual slope of the hill of water fast, as compared to western boundary currents weak, as compared to western boundary currents
.True statements about Eastern boundary currents: Eastern boundary currents refer to the currents on the eastern side of ocean basins that flow toward the equator from the poles.
The eastern boundary currents are characterized by being wide, weak, and flowing along the more gradual slope of the hill of water.True statements about Eastern boundary currents: Eastern boundary currents refer to the currents on the eastern side of ocean basins that flow toward the equator from the poles.
These currents, which are relatively shallow, are generally broader and weaker than western boundary currents.They are referred to as boundary currents because they represent the boundary between the subtropical and subpolar gyres.
Western boundary currents are known for their speed and depth, and the cold waters of the western boundary currents have a significant impact on global weather patterns. Eastern boundary currents, on the other hand, tend to be wider and weaker than their western counterparts.
Eastern boundary currents tend to flow along the more gradual slope of the hill of water, whereas western boundary currents tend to flow along the steeper slope of the hill of water. They are often accompanied by upwelling, which brings deep, nutrient-rich water to the surface, making them ideal fishing grounds.
Eastern boundary currents are characterized by being wide, weak, and flowing along the more gradual slope of the hill of water.
To know more about currents refer here:https://brainly.com/question/3110787#
#SPJ11
what is the dominant factor in the location of the population settlements in north africa and southwest asia?
The dominant factor in the location of population settlements in North Africa and Southwest Asia is the availability of resources.
These regions are characterized by harsh climates and thirsty geographies, limiting the vacuity of pastoralist land and fresh water. People have settled near gutters, oases and littoral areas as these offer access to water and land suitable for husbandry. In some areas, similar as the Middle East,
oil painting reserves have been a major factor in the position of agreements, as they give an profitable source of income. In other areas, similar as the Maghreb, mortal agreements have been established in areas with a more temperate climate, allowing for further varied foliage and a more different range of resources.
To know more about population settlements visit:
https://brainly.com/question/15974455
#SPJ4
Maine, Nevada, and North Dakota do not have large populations. What are some reasons for such small populations
Answer:
Explanation:
I have been to Maine several times. There are two issues about living there.They have hard winters, most of the time. Do not live there if you cannot deal with a long, hard winter. Its good if you can stay inside and write, like Stephen King.
another thing is job diversity because they rely on Lumber, fishing and other natural resources
according to the multiple nuclei model, an airport is likely to attract nearbyhotels and warehousesretail and wholesale shopsresidences and highwaysuniversities and colleges
According to the multiple nuclei model, an airport is likely to attract nearby residences and highways.
Multiple Nuclei Model, created by C.D. Harris and E.L. Ullman, is a geographic theory that acknowledges the presence of numerous nodes in a city, each having its own unique features.
Each node serves as the nucleus of the city's growth and development. Multiple nuclei model According to the multiple nuclei model, an airport is likely to attract nearby residences and highways, as it is a significant component of the city's economic development.
Since the airport is critical for business growth and creates job opportunities, people prefer to settle near the airport. This leads to the construction of new residential areas and highways near the airport, which facilitates travel to and from the airport.
For such more question on nuclei model:
https://brainly.com/question/30870804
#SPJ11
Please someone explain how to do this
Answer:
i just need pnts
explanation:
im sorry
sort each statement below into the appropriate bin based on whether it is something that scientists knew about pluto or its moon charon before the new horizons flyby, is something learned as a result of the new horizons flyby, or is something that seems possible from the new horizons mission but for which we'll need additional data to establish it with certainty.
Pluto and Charon are tidally locked: This is something that scientists knew about Pluto and its moon Charon before the New Horizons flyby. Tidal locking occurs when an object's orbital period is the same as its rotational period, meaning that the same side of the object is always facing the other.
In this case, the same sides of Pluto and Charon are always facing each other as they orbit one another. The likelihood of this happening was predicted before the mission based on the distance between Pluto and Charon and the gravitational forces between them, and the New Horizons flyby confirmed this to be the case.
Charon has a tenuous atmosphere: This is something that was learned as a result of the New Horizons flyby. Before the mission, scientists suspected that Charon may have an atmosphere, but data from New Horizons showed that the atmosphere is much more substantial than expected.
The flyby revealed that the atmosphere is composed mostly of nitrogen and methane, and is about 100,000 times thinner than Earth's atmosphere. Additional data is needed to establish the atmosphere's exact composition and other details.
Know more about Charon here
https://brainly.com/question/29931155#
#SPJ11
Which of the following statements is true?
a) A region does NOT need to be distinguishable from other areas
b) Regions exist only at some scales
c) Financial networks are not functional regions
d) A region has to be a continuous area
The statement that is true is b) Regions exist only at some scales.
What are regions ?Regions are spatial areas that share common characteristics, whether it be cultural, economic, or physical. However, the definition and boundaries of a region can vary depending on the scale of analysis.
For example, a city can be considered a region at the local scale, but when viewed from a national or global perspective, it may be just a small part of a larger region, such as a state or country. A region typically needs to be distinguishable from other areas to be meaningful and useful in analysis and decision-making.
Find out more on regions at https://brainly.com/question/563489
#SPJ1
(Please help, the sooner this is answered the better. Thank you!)
[This is for astronomy but I don't see an astronomy option]
Why is the planet Uranus virtually invisible to the unaided eye?
1. it is very far away from Earth
2. it is obscured by a constant haze
3. its halo bends light around it
4. it does not reflect light
Answer:
It is obscured by a constant haze. ( This may not be correct )
Planet Uranus is virtually invisible to the unaided eye because it is obscured by a constant haze. Hence, option B is appropriate.
What is the meaning of Uranus?The seventh planet from the Sun is Uranus. It bears the name of the Greek sky god Uranus, who is also known as Cronus' father, Zeus' grandpa, and Ares' great-grandfather in Greek mythology. In the Solar System, Uranus has the fourth-largest planetary mass and the third-largest planetary radius.
With a tilt of 97.77 degrees and the only planet whose equator is almost at a straight angle to its orbit, Uranus may have collided with an Earth-sized object long ago. The most intense seasons in the solar system are brought on by this peculiar tilt.
Four times as wide as Earth, Uranus. Uranus' size would be equivalent to a basketball if Earth were a huge apple.
Hence, option B is correct.
Learn more about Uranus here:
https://brainly.com/question/9048375
#SPJ2
which of the following plots most accurately shows the temperature distribution in the solar system at the time of planet formation?graphs: A. steadily increasing line. B. steadily decreasing line. C. straight line. D. increasing
The steadily decreasing line most accurately shows the temperature distribution in the solar system at the time of planet formation. The correct option is B.
The temperature distribution in the solar system at the time of planet formation is best represented by the steadily decreasing line.
The steadily decreasing line accurately shows the temperature distribution in the solar system at the time of planet formation, where the temperature was steadily decreasing.
The temperature in the solar system, at the time of planet formation, was steadily decreasing due to the absence of the sun.
The Sun, which is the primary source of heat in the solar system, had not yet formed, and the temperature was cold.
The temperatures in the solar system were very low, and dust and gas were slowly cooling. It was at this time that the dust and gas began to collapse into clumps, which later led to the formation of planets.
The steadily decreasing line represents the temperature distribution of the solar system at the time of planet formation.
TO KNOW ABOUT planet formation:
https://brainly.com/question/29413773
#SPJ11
which type of aggregates (igneous, sedimentary, or metamorphic) would you expect to be most suitable as a base-course material?
For a base-course material, the type of aggregate that would be the most suitable is sedimentary aggregate. This is due to its structure, which makes it stable, durable, affordable and easy to compact.
When it comes to aggregate materials, there are three main types: igneous, sedimentary, and metamorphic.
Igneous aggregates are formed from volcanic material that has been solidified. These materials are hard and durable, making them ideal for high-strength concrete and asphalt. They are also useful in railroad ballasts, building materials, and as fill for large voids in construction projects.
Sedimentary aggregates are formed from the erosion of pre-existing rock layers. This type of aggregate is the most commonly used in construction. It's known for its durability, low cost, and easy availability. Sedimentary aggregates include materials like gravel, sand, and limestone.
Metamorphic aggregates are formed by the transformation of pre-existing rocks through heat and pressure. They are the hardest and most durable. Marble, slate, and quartzite are examples of metamorphic aggregates. They are mostly used in high-strength concrete, railroad ballasts, and as fill for large voids in construction projects.
learn more about Igneous, Sedimentary and Metamorphic:
https://brainly.com/question/29512093
#SPJ11
according to the model in which that active galactic nuclei are powered by supermassive black holes, the energy released as light comes from
Answer:
b
Explanation:
What are the boundaries between tectonic plates that are colliding?
Answer:
Convergent plate boundary
Explanation:
If two tectonic plates collide, they form a convergent plate boundary. Usually, one of the covering plates will move beneath the other, a process known as subduction. Deep trenches are features often formed where tectonic plates are being subducted and earthquakes are common at subduction zones as well.
describe eac the 4 major types of irrigation.a.rank them from least amount of evaporative/runoff loss to most.
There are four major types of irrigation: surface irrigation, sprinkler irrigation, drip irrigation, and subsurface irrigation.
Surface Irrigation involves flooding fields with water and is the most common type of irrigation. It is less expensive than other methods, but is also the least efficient, with higher rates of water loss due to evaporation and runoff.
Sprinkler Irrigation uses a system of pipes and nozzles to spray water onto crops, allowing for more even water distribution and fewer losses due to runoff. This is the most efficient method, with the least water loss due to evaporation or runoff.
Drip Irrigation uses tubes with emitters and nozzles to slowly drip water directly to plant roots, and is the most efficient method of all with the least amount of water loss due to evaporation or runoff.
Subsurface Irrigation is similar to drip irrigation, but the water is injected directly into the soil below the crop roots, which reduces the amount of water loss due to evaporation or runoff.
From least amount of evaporative/runoff loss to most, the types of irrigation are: Drip Irrigation, Subsurface Irrigation, Sprinkler Irrigation, and Surface Irrigation.
To know more Types of irrigation here
https://brainly.com/question/16179426
#SPJ11