Figure 1 (Use this figure to answer questions 6,7, and 8. Assume that the height at point
A and point C are the same)
С
B
As the car moves from point A, to point B, and finally to point C, the total energy of the car
decreases from point A to point B, then increases from point B to point
increases from point A to point B, then decreases from point B to point
O is lost between points B and C
stays the same, but is converted between potential and kinetic energy
Answer:
JWBVH
Explanation:
NWSBWHSBHS
State the name(s) of the sub-atomic particle(s) that have/has a positive charge. Answer with the name of the particle(s) only.
A. Neurons
B. Protons
C. Electrons
Answer:
protons because they have the most positive charge
where was the first oil well drilled
Answer:
First oil well in the United States, built in 1859 by Edwin L. Drake, Titusville, Pennsylvania.
Nitrogen in plants and soil is changed into nitrogen compounds by _____ ?
Nitrogen Fixation because It's the process by which atmospheric nitrogen is converted either by a natural or an industrial means to form of nitrogen such as ammonia.
If 3.02 g of CuNO3 is dissolved in water to make a 0.560 M solution, what is the volume of the solution in milliliters?
Answer: The volume of the solution is 28.75 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of copper nitrate = 0.560 M
Given mass of copper nitrate = 3.02 g
Molar mass of copper nitrate = 187.56 g/mol
Putting values in equation 1, we get:
[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]
Hence, the volume of the solution is 28.75 mL
A student hypothesized that the amount of sunlight a sunflower plant receives determines the number of sunflower seeds the plant produces. In his experiment,
the number of seeds produces is the
Manipulated variable
ЕОООО
Control variable
Dependent variable
Independent variable
Answer:
Dependent variable
Explanation:
In every experiment, there must be a dependent variable and an independent variable.
The independent variable is that variable that you have to manipulate in order to receive a response. E.g, in the experiment described in the question, the amount of sunlight a sunflower plant receives is the independent variable.
The dependent variable is the number of seeds produced. It is the response obtained by carefully manipulating the amount of sunlight
What is the value of Keq for the reaction expressed in scientific notation? 1.6 ´ 10–5 6.2 ´ 10–4 6.2 ´ 104 1.6 ´ 105
The question is incomplete, the complete question is:
Consider the reaction:
[tex]2NOCl\rightleftharpoons 2NO+Cl_2[/tex]
At equilibrium, the concentrations are as follows. [NOCl] = 1.4 × 10–2 M [NO] = 1.2 × 10–3 M [Cl2] = 2.2 × 10–3 M What is the value of Keq for the reaction expressed in scientific notation?
A) 1.6 × 10–5
B) 6.2 × 10–4
C) 6.2 × 10+4
D) 1.6 × 10+5
Answer: The correct option is A) [tex]1.6\times 10^{-5}[/tex]
Explanation:
The equilibrium constant is defined as the ratio of the concentration of products to the concentration of reactants raised to the power of the stoichiometric coefficient of each. It is represented by the term [tex]K_{eq}[/tex]
For the given chemical equation:
[tex]2NOCl\rightleftharpoons 2NO+Cl_2[/tex]
The expression for equilibrium constant will be:
[tex]K_{eq}=\frac{[NO]^2}{[Cl_2][NOCl]^2}[/tex]
Given values:
[tex][NO]=1.2\times 10^{-3}M[/tex]
[tex][Cl_2]=2.2\times 10^{-3}M[/tex]
[tex][NOCl]=1.4\times 10^{-2}M[/tex]
Putting values in above expression, we get:
[tex]K_{eq}=\frac{(1.2\times 10^{-3})^2\times (2.2\times 10^{-3})}{(1.4\times 10^{-2})^2}\\\\K_{eq}=1.6\times 10^{-5}[/tex]
Hence, the correct option is A) [tex]1.6\times 10^{-5}[/tex]
please answer this as quickly as possible
Explanation:
I. Because an explosion is a very fast exothermic reaction
ll. it depends on the it's particle size
Alpha particles cannot penetrate the skin. In which of the following circumstances could they still threaten human health?
A. If they travel into the human eye.
B. If they are inhaled or swallowed.
C. If they enter into the human ear.
D. If they are touched.
Answer:
B. If they are inhaled or swallowed.
The values used in the scale of pH and pOH are derived from a system designed by ______.
Curie
Gordonsen
Dalton
Sorenson
How many meters are in 37 cm?
0.37 m
0.037 m
3700 m
370 m
Answer:
the correct answer is 0.37m
Explanation:
37/100 = 0.37m
Answer:
How many meters are in 37 cm?
In 37 cm - 0.37 m
>3
An earthquake occurs at 8:15:35 PM, and a seismic station detects the P-
wave at 8:20:05 PM. What was the travel time for the P-wave to this
seismic station? *
- 3 minutes and 30 secs
-4 minutes and 30 secs
-5 minutes and 30 secs
-6 minutes and 30 secs
Answer:
5 minutes 35 seconds because an earthquake travels underground faster than on the surface
What volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution?
The volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution is 1.4 L and 0.6 L
What is Concentration ?
In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture.
Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.
Amount of stuff = concentration x volume.
We can set up 2 equations:
V₁ = volume 12M NaOH.V₂ = volume 2M NaOH.(12×V₁) + (2×V₂) = 9×2 = 18
12V₁ + 2V₂ = 18 (1)
V₁ + V₂ = 2 (2)
From (2) we get:
V₁ = (2 − V₂)
Substituting V₁ back into (1) ⇒
12 (2−V₂) + 2V₂ = 18
24 − 12V₂ + 2V₂ = 18
10V₂ = 6
V₂ = 0.6L
From (2) we can say:
V₁ + 0.6 = 2
V₁ = 2 − 0.6 = 1.4L
Therefore, The volume of 12 M NaOH and 2 M NaOH should be mixed to get 2 litres of 9 M NaOH solution is 1.4 L and 0.6 L
Learn more about concentration here ;
https://brainly.com/question/19221273
#SPJ2
The process of changing a gas to a liquid is known as _____.
sublimation
precipitation
evaporation
condensation
Answer:
Condensation is the process.
The absorption spectrum of sodium has a line at 589 nm. What is the energy of this line? (The speed of light in a vacuum is 3.00 x 10^8 m/s, and Planck's constant is 6.626 x 10^-34 Jos.)
A. 8.89 x 10^26 J
B. 5.09 x 10^14 J
C. 3.37 x 10^-19 J
D. 2.96 x 10^18 J
Answer:
C. 3.37 x 10^-19 J
Explanation:
Which is TRUE about 'acidified' water acting on rocks?
Please give 1 answer.
A.
Peaty soil water does not cause weathering
B.
Limestone is eroded faster than basalt rock by this type of weathering
c.
It is an example of physical weathering
D.
Nearly neutral water will not weather rocks
when water is added pH of the acidic solution
1 remain same
2 increases
3 decrease s
4 become zero
Answer:
the solution becomes less concentrated... meaning there is a decrease in acidity ...hence the pH slightly increases as lesser ph
means more acidity
The nth shell holds a minimum number of 2n2 electrons
True
False
Other:
Answer: The statement the [tex]n^{th}[/tex] shell holds a minimum number of [tex]2n^{2}[/tex] electrons is true.
Explanation:
The alphabet 'n' denotes the principal quantum number whose value can be equal to 1, 2, 3, and so on but can never be zero.
Basically, 'n' is the number of shell of an atom and total number of orbitals present in a shell is [tex]n^{2}[/tex].
Each orbital can hold up to a maximum of wo electrons. Hence, the [tex]n^{th}[/tex] shell can hold a minimum number of [tex]2n^{2}[/tex] electrons.
Thus, we ca conclude that the statement the [tex]n^{th}[/tex] shell holds a minimum number of [tex]2n^{2}[/tex] electrons is true.
how much energy (in joules) is needed to change 45.0 grams of ice at -25.0 C to water at 49 C?
Explanation:
The heat required to convert 25 grams of -10 °C steam is 78360 J or 78.36 kJ.
Which of the following would DECREASE the rate of a reaction?
1. add a catalyst
2. increase the concentration
3. increase the volume
4. increase the pressure
Answer: increasing volume
Explanation: adding a catalyst would increase reaction time and increasing INCREASING concentration definently makes reaction time alot faster increasing pressure actually makes it more concentrated, so no it is not
1234567890123345678901234567890
Answer:
1234567890123345678901234567890
Explanation:
trick question....
What is meant by term valency? Explain it in terms of electrons donations and acceptance.
Answer:
Valency can be defined as a measure of the combining power of a chemical element with other atoms to form a molecule or chemical compound.
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.
Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.
Valence electrons can be defined as the number of electrons present in the outermost shell of an atom. Valence electrons are used to determine whether an atom or group of elements found in a periodic table can bond with others. Thus, this property is typically used to determine the chemical properties of elements.
Valency can be defined as a measure of the combining power of a chemical element with other atoms to form a molecule or chemical compound.
Typically, valency is measured by the amount of hydrogen atoms that a chemical element can combine with or displace to form a molecule or chemical compound.
For example, Oxygen has a total number of eight (8) electrons while neon has total number of ten (10) electrons. Therefore, an atom of oxygen is able to gain (accept or receive) two (2) more electrons in order to have the same electron arrangements as the noble gas i.e an atom of neon with an atomic number of 10.
A bird has flown 300 metres for 6 hours. What is the bird's speed? Formula for speed = d/t * 2 points
40 m/hr
50 m/s
50 m/h
50 m/min
Answer:
C
Explanation:
d=300
t=6hr
speed=?
speed=300/6
speed=50m/hr the important thing in this question is to get the right units
KHP, the acid used in this experiment,
stands for potassium hydrogen
phosphorous.
True
False
Answer:
false
Explanation:
standard form is Potassium hydrogen phthalate
NO2 + H2O =
SO2 + H2O =
H2S + H2O=
SO2+ H2O=H2SO3
H2S+ H2O=H2SO4 +H2
NO2+ H2O= HNO3+NO
Give an example of each of the following chemical changes.
(a) A photochemical reaction involving
(i) silver salt
(ii) water
(b) A reaction involving
(i) blue solution
(ii) formation of dirty green precipitate
(c) Two gases combine to form white solid.
(d) A reaction where colour change is noticed.
Answer:
Give an example of each of the following chemical changes.
(a) A photochemical reaction involving
(i) silver salt
(ii) water
(b) A reaction involving
(i) blue solution
(ii) formation of dirty green precipitate
(c) Two gases combine to form white solid.
(d) A reaction where colour change is noticed.
Explanation:
a) A photochemical reaction involving silver salt is used in black and white photography.
AgCl breaks down and converts into Ag during this photochemical reaction.
(ii) Photochemicalreaction involving water takes place in plants during the photosynthesis process.
Plants prepare food(carbohydrate) by using sunlight water and CO2 gas.
(b) A reaction involving
(i) blue solution:
For example reaction of copper sulfate solution with an iron nail.
When an iron nail is placed in CuSO4 blue color solution, then it changes to green color and reddish-brown solid deposits at the bottom of the container.
(ii) Reaction of ferrous sulfate with NaOH forms a dirty green precipitate of ferrous hydroxide.
(C) Two gases combine and form a white solid:
For example when HCl gas reacts with ammonia gas, then a white solid of ammonium chloride will be formed.
(d) A reaction where the color change is noticed.:
When an iron nail is placed in CuSO4 blue color solution, then it changes to green color and reddish-brown solid deposits at the bottom of the container.
How do the Carnivorous plants survive without soil?
Answer:
A simple answer: Carnivores don't eat plants only flesh. So they would not need soil. But it would be hard for Carnivores to get energy because they get energy indirectly from the animals (herbivores) that they eat. How do they get the energy from a herbivore you might ask. Herbivores eat only plants and that gives the herbivore the plant's energy; but if the herbivore gets eaten, it is indirectly transferred into the Carnivore. Hope this helped!!
Carnivore = only feeds on flesh
Herbivore = eats only plants
Omnivore = eats plants and animals/flesh
While playing soccer, Caria slides across one of the lines on the field. When she stands up, what base does she stop?
O calcium hydroxide
O ammonium hydroxide
O zinc hydroxide
potassium hydroxide
l
Answer:
Canxi hydroxit
Explanation:
Answer:
A- calcium hydroxide
Explanation:
Got it right on Edge.
Why phenol is more acidic than alcohol?
Answer:
Phenol is more acidic than cyclohexanol and acyclic alcohols because the phenoxide ion is more stable than the alkoxide ion. ... But in a phenoxide ion, the negative charge is delocalized over the benzene ring. Phenoxide ion is therefore resonance stabilized.
Answer:
Phenol is more acidic than cyclohexanol and acyclic alcohols because the phenoxide ion is more stable than the alkoxide ion. ... But in a phenoxide ion, the negative charge is delocalized over the benzene ring. Phenoxide ion is therefore resonance stabilized.
Explanation:
Please Mark me brainlist
Which method of separation would you use, if you want to collect.....A.Some sugar from a sugar solution? B.Rice grains, which have accidentally been mixed with flour? C.Some pure water from salty water?D.Some salt from salty water?E.Some clear water from muddy water?
Answer:
Explanation:
B.Rice grains, which have accidentally been mixed with flour
