Answer: B. Volcanic eruption
Explanation:
A volcano is firmed when molten rocks is formed to the surface of the Earth. Volcanoes release molten rocks, ash, and gases to the Earth's surface.
Volcanoes are agents of change as the eruptions lead to the formation of new landforms and also destroy several things that they come in contact with.
Volcanic eruptions also occurs due to plate tectonics. Other events that happen due to plate tectonics also include earthquakes, and tsunamis.
Answer:B
Explanation:
What is the best-known feature of sedimentary
rocks?
A. ripple marks
B. fossils
C. graded bedding
D. cross-bedding
Answer:
option is (b)
Explanation:
please mark me as brilliant
Which material is found in asteroids?
Answer:
Asteroids are made of rock, metals, and other elements. Some even contain water. Asteroids that are mostly stone sometimes are more likely to lose piles of rubble. Asteroids that are mostly iron are more rock-solid.
Explanation:
Answer:
asteriods are made of rocks. asteroids that are mostly iron are more, well, rock-solid
Explanation:
Why do gases diffuse more quickly than liquids?
Choose the correct answer.
A) Liquids can be compressed easily.
B)The particles in gases are not mobile.
C)Liquids are always at lower temperatures than gases.
D)Gas particles move rapidly and have space between them.
Answer:
D)Gas particles move rapidly and have space between them.
Explanation:
Matter exists in three states namely: solids, liquids and gases. The particles contained in these three states are different from one another. In the gaseous state, the particles are FAR APART from one another i.e. space exists and they move at a very fast rate in contrast to the particles of a liquid, which have less space and move slower.
This rapid movement of gas particles within a less restricted space accounts for the reason why gaseous substances DIFFUSE more quickly than liquids.
write a summary about the notes below (images attached)
look here :>
Chemistry is the study of matter, which is anything that has mass and takes up spaces. Changes in matter is best described as physical properties, can be observed without changing the substance into another substance, and chemical properties, a substance that describes it's ability to change into other substances. An example of a physical property is melting point and flexibility. An example of a chemical property is burning and rusting.
Chemical changes may also occur when bonds break and new bonds are then formed. As a result of this, a new substance is formed. Something you can look for in physical properties are changes in color and if gases are produced from solids or liquids.
chemistry is the science of changing of objects into other substances, and the study of matter. Chemical change can be seen with things like irreversable burns, and cooking while physical change can be seen as changes of apperance like moving an object, or painting it.
The density of ethanol, C 2H 5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 25.0 g of CO 2 according to the following chemical equation?
C 2H 5OH( l) + 3 O 2( g) → 2 CO 2( g) + 3 H 2O( l)
Answer:
11.1mL
Explanation:
The reaction expression is given as:
C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O
Given parameters:
density of ethanol = 0.789g/mL
mass of CO₂ = 25g
Unknown:
Volume of ethanol = ?
Solution:
First find the number of moles of the CO₂ from the given mass;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of CO₂ = 12 + 2(16) = 44g/mol
Number of moles = [tex]\frac{25}{44}[/tex] = 0.57mol
Then;
Find the number of moles of ethanol used;
3 moles of CO₂ is produced from 1 mole of ethanol;
0.57mole of CO₂ will be produced from [tex]\frac{0.57}{3}[/tex] = 0.19mole of ethanol
Now;
Find the mass of the ethanol from the given mole;
Mass of ethanol = number of moles x molar mass
Molar mass of ethanol = 2(12) + 5(1) + 16 + 1 = 46g/mol
Mass of ethanol = 0.19 x 46 = 8.74g
Then;
Density is the mass per unit volume of a substance;
Density = [tex]\frac{mass}{volume}[/tex]
Volume = [tex]\frac{mass}{density}[/tex]
Volume = [tex]\frac{8.74}{0.789}[/tex] = 11.1mL
a goup of cells that work together to perform a specific function.
Answer:
Cell Differentiation and Tissue.
Explanation:
tissues are organized communities of cells that work together to carry out a specific function.
The periodic table is organized into groups and periods of elements. The characteristics of a certain group of elements are listed below. Which of these elements is in this group?
Characteristics of a group of elements
•is shiny
•is solid at room temperature
•has atoms with two valence electrons
A-silicone
B-lithium
C-strontium
D-aluminum
Answer:
C:Strontium
Explanation:
A rock rolls down a hill. Which form of energy is this an example of?
Chemical
Electrical
Mechanical
Thermal
Answer:
Mechanical
Explanation:
chemical
Explanation:
I took test 2020
Which method of heat transfer allows you to fry an egg in a frying pan on the stove?
Answer:
Conduction
Explanation:
Answer:
Conduction is correct
Explanation:
Matter is anything that has mass and takes up space (volume). How does volume change as matter changes state?
A. The density of matter remains the same, only energy of the atoms changes.
B. matter becomes more dense as it moves from solid to gas
C. Matter becomes less dense as it moves from gas to solid state
D. Matter becomes more dense as it moves from gas to solid state
Answer: D) Matter becomes more dense as it moves from gas to solid state
A gas expands to fill up the container of whatever shape or size. As it cools to a solid, the molecules get closer together and don't move as much (the molecules still will vibrate and move somewhat even in solid form). So effectively the volume of the object shrinks while the amount of mass stays the same. This is why the density increases when going from gas to solid.
every spring has an equilibrium position which statement describe a spring at it equilibruim position?
g Lactate dehydrogenase is a tetrameric enzyme (144kDa) that catalyzes conversion of pyruvate into lactate to regenerate NAD in oxygen depleted muscles. a) Why in anaerobic conditions, is NADH oxidized by lactate dehydrogenase
Answer:
Kindly check the explanation.
Explanation:
NADH is oxidized anaerobic conditions by lactate dehydrogenase because in order to transform or change Pyruvate into Lactate it has to happen in an anaerobic condition that is where we hardly find oxygen(in the presence of no oxygen).
The chemical compound or say the enzyme known as lactate dehydrogenase gets its proton from NADH( in a REDOX type reaction). After getting the proton from NADH, it uses that to convert Pyruvate into Lactate.
NB: the conversion can also be done in aerobic condition but more ATP will be produced. With anaerobic condition, less ATO is produced and there is re-oxidation.
4. Question: What effect does the amount of light have on plant growth?
What is the relationship between temperature and pressure
Which of the following is a problem caused by dams?
O A. They can be used to generate electricity.
B. They provide water for the irrigation of crops.
.
O C. They impede fish migration and spawning.
O D. They collect and store water for human use.
Short Answer Questions 18 points
1) What year was Mendeleev born? _______________________________________
2) Where was Mendeleev born? ______________________________________
3) Explain how Mendeleev arranged his periodic table.______________________________________
4) What were the 3 Elements that were missing from Mendeleev’s Periodic Table?
__________________________________________________________________
5) When did Mendeleev die? Exact date ____________________________________
6)Which particles are in the nucleus of an atom? ______________________________
1) He was born on February 8, 1834
2) He was born in Tobolsk, Russia
3) Mendeleev arranged the elements in order of increasing relative atomic mass.
4) Gallium, germanium, and scandium
5) He died on February 2, 1907
6) Protons (positive charge) and neutrons (neutral charge)
which type of rection has the general formuial ab+cd
A neutral atom becomes a positive ion when it
Answer:
Neutral atoms can be turned into positively charged ions by removing one or more electrons.
Explanation:
If there is an atom that has 9 protons and 9 electrons, removing an electron from the atom will gain a postive charge.
Which pattern on the periodic table is correctly predicted below?
Groups determine the number of valance electrons and periods determine the number of energy levels
Groups determine the number of energy levels and periods determine the number of valence electrons
Groups determine the number of protons, and periods determine energy levels
Groups determine the number of neutrons, and periods determine valence
Plzz
1 point
Which element requires the least amount of energy to remove its valence electron(s)?
barium
chlorine
oxygen
carbon
The amount of force needed to keep a 10 kg box moving at a constant
speed of 0.4 m/s on frictionless ice is *
ON,
0.04N
40 N
1.4 N
Answer:
ON
Explanation:
Frictional force is a force that opposes the motion of body. It is because of friction that motion can be controlled and even walking is made possible.
Now, on a frictionless surface, there is no opposition to motion. Therefore, to keep the body moving there is no force required.
If surface lacks friction, motion will continue perpetually without any hinderance.A binary molecule consists of how many atoms?
O1
02
3
4
Answer:
2
Explanation:
BIonary bi means 2
i hope this helps :)
1)
At 150 C, what state of matter would water be at?
2)
Which of these three options will turn to a gas at the COLDEST temperature:
Carbon Dioxide, Gold, or Ethanol?
1. gaseous
2. Carbon Dioxide
Gustavo and Beatriz are pushing on a door in opposite
directions. If the door does not move, the forces are
The net force in this scenario would be Answer: balanced and zero
Answer:
Correct
Explanation:
Balanced forces are always zero!
Answer:
Balanced
Zero
Explanation:
An atom has 8 protons, 8 neutrons and 9 electrons. is thus a cation, anion, or neutral atom?
Answer:
It is an Anion because there are more electrons than protons making it negative
How do molecules of air in direct contact with Earth's solid, warm surface absorb heat energy?
A conduction
B condensation
C. convection
D. diffusion
Answer:
actually its c convection.
Explanation:
my teacher asked the same question but with diffrent oppstions.
and diffusion is DEFINATALY not the answer. its convection.
Molecules of air in direct contact with Earth's solid, warm surface absorb heat energy with conduction.
What is conduction ?The process by which heat is transmitted from an object's hotter end to its cooler end is known as conduction. The term "thermal conductivity" refers to an object's capacity to transfer heat, and it is represented by the letter k. Along a temperature gradient, heat flows naturally.
When two materials or objects come into direct touch with one another, conduction takes place. More quickly than in a cooler item, the molecules in a warmer one vibrate. The slower molecules clash with the faster vibrating molecules.
Ground-level heat is radiated into the lower atmosphere. In conduction, heat is transferred directly from hotter regions to cooler ones. Warmer molecules bounce vigorously and clash with molecules close by, exchanging energy.
Thus, option A is correct.
To learn more about Conduction follow the link;
https://brainly.com/question/12136944
#SPJ2
What characteristic of life is demonstrated by maintaining a stable pH?
Answer:
Living Things Maintain Stable Internal Conditions When any living organism gets thrown off balance, its body or cells help it return to normal. In other words, living organisms have the ability to keep a stable internal environment. Maintaining a balance inside the body or cells of organisms is known as homeostasis.
Explanation:
Explain the humoral theory
Answer:
The medical philosophy of the ancient Greeks in which the state of health and disease was determined by the four body “humours”—blood, yellow and black bile, and phlegm—and their relationships with the four elemental humours—air, fire, earth and water. Segen's Medical Dictionary.
Explanation:
predict how many moles of nh3 would be made if 6.00 moles of h2 were used N2
Answer:
4 moles
Explanation:
The equation is 3H2 + N2 → 2NH3
so the ratio of moles would be
2:3 or 2/3
so 6*2/3 which is 4
hope this helped.
Answer:
4moles
Explanation:
Given parameters:
Number of moles of H₂ used = 6moles
Equation of the reaction:
N₂ + 3H₂ → 2NH₃
3 mole of H₂ was used to produce 2 mole of NH₃;
6 mole of H₂ will produce [tex]\frac{6x2}{3}[/tex] = 4 moles of NH₃
The number of moles of NH₃ produced is 4moles
Which of the following macromolecule is the main energy source for most living organisms?
A. Nucleic Acids
B. Carbohydrates
C. Lipids
D. Proteins
Answer:
Carbohydrates
Explanation:
Living things use carbohydrates as their main source of energy. The breakdown of sugars, such as glucose, supplies immediate energy for cell activities. Plants, some animals, and other organisms also use carbohydrates for structural purposes.