What is the name of the ionic compound with the formula:
AlF3
Answer:
potassium chloride.
if you had a block square that weighed 5.00 grams what would be the length of each side
Answer:
[tex]l = 0.793[/tex] cm
Explanation:
Let us assume the density of block square [tex]10[/tex] g/cm³
As we know
Volume = [tex]\frac{Mass}{Density}[/tex]
Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]
As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]
[tex]l^3 = 0.5[/tex]
[tex]l = 0.793[/tex] cm
Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing
Answer:
I would say C.)
Explanation:
Freezing and condensation are both ways that heat is let out from an object.
Help me with this pls
1.2 dkg to grams now I have to say extra stuff for it to submit
Answer:
12 grams and I have to write something longer so just ignore this
Some items, such as rubber, float on the water, while some items, such as gold, sink in
the water. If an item floats is it more or less dense than the water?
Answer:
If an item is less dense, it floats on the water.
Explanation:
We know this since the more dense something it usually is heavier than if it was less dense. Which ways it down resulting to it sinking.
For species that reproduce asexually, all their offspring are
A. genetically identical
B. genetically different
C. almost identical
D. slightly different
Answer:
A. genetically identical
Explanation:
Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent. A single individual can produce offspring asexually and large numbers of offspring can be produced quickly
All the offspring that are produced in the process are genetically identical.
When we talk about this mode of reproduction, we talk about a mode of reproduction in which an organism reproduces without the fusion of gametes. This occurs essentially by cell division.
When this occur, there is no crossing of genetic material as such, all the offspring that are produced in the process are genetically identical.
Learn more about reproduction:https://brainly.com/question/1301963
what do igneous rocks become when they break down and settle into layers?
Answer:
Sedimentary rocks
Explanation:
Igneous rocks will become sedimentary rocks when they break down and settle into layers .
Igneous rocks are rocks that are formed by the cooling and solidification of magma within or on the earth crust.
When agents of weathering and denudation forces acts on a rock body, they break them down producing sediments in the process.
Sediments are transported into depositional basins where they are laid down and cemented together. This in turn forms sedimentary rocks. The break down and settling of sediments leads to the formation of sedimentary rocks.To locate objects in their environments, bats in flight and porpoises under water both use ultrasound waves with frequencies that are beyond human hearing. These animals produce an ultrasonic wave and then detect echoes from nearby objects in order to determine the location of the object Porpoise Bat If a porpoise and a bat both produce ultrasonic waves when they are 16 meters from an object, which animal would hear its echo first? The bat would hear its echo first because sound travels faster in air than in water. O The porpoise would hear its echo first because sound travels faster in water than in air. O The bat would hear its echo first because the frequency of sound waves is greater in air than in water 0 The porpoise would hear its echo first because the frequency of sound waves is greater in water than in air.
Answer: The porpoise would hear its echo first because sound travels faster in the water than in air.
Explanation:
Visible light is a part of what spectrum
Answer:
Visible Spectrum/Electromagnetic spectrum
Explanation:
The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.
Q1; ___________ have almost half a set of electrons in the outer most energy level.
1- metalloids
2- metals
3- nonmetals
Q2;________ are known to be gasses at room temperature.
1- nonmetals
2- metalloids
3- metals
Answer:
2 metalliods....
1 metals
Trees, birds, and bacteria are all similar because they are all formed from
Answer:
Cells or atoms
Explanation:
Answer:
are made of one or more cells.
need energy to stay alive.
respond to stimuli in their environment.
grow and reproduce.
maintain a stable internal environment.
Explanation:
Plz brainliest
What are two sources of phosphorous?
A. stratosphere
B. Erosion
C. Cows
D. Fossil fuels
E. Fertilizer
Answer:
A. stratosphere
E. Fertilizer
Explanation:
Osmium metal, the densest element, has a density of 22.6 g/mL, while hydrogen, the least dense element, has a density of 8.99 e-5 g/mL. Calculate the volume occupied by 1.00 g of each element. How many times more dense is osmium than hydrogen?
Answer:
1. Volume of osmium = 0.044 mL
2. Volume of Hydrogen = 11123.47 mL
3. Osmium is 251390 times denser than hydrogen
Explanation:
From the question given above, the following data were obtained:
Density of osmium = 22.6 g/mL
Density of Hydrogen = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Mass of Hydrogen = 1 g
1. Determination of the Volume of osmium.
Density of osmium = 22.6 g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
22.6 = 1 / volume
Cross multiply
22.6 × volume = 1
Divide both side by 22.6
Volume = 1 / 22.6
Volume of osmium = 0.044 mL
2. Determination of the Volume of Hydrogen.
Density of osmium = 8.99×10¯⁵ g/mL
Mass of osmium = 1 g
Volume of osmium =?
Density = mass /volume
8.99×10¯⁵ = 1 / volume
Cross multiply
8.99×10¯⁵ × volume = 1
Divide both side by 8.99×10¯⁵
Volume = 1 / 8.99×10¯⁵
Volume of Hydrogen = 11123.47 mL
3. Determination of the number of times osmium is denser than hydrogen.
Density of osmium (Dₒ) = 22.6 g/mL
Density of Hydrogen (Dₕ) = 8.99×10¯⁵ g/mL
Dₒ / Dₕ = 22.6 / 8.99×10¯⁵
Dₒ / Dₕ = 251390
Cross multiply
Dₒ = 251390 × Dₕ
Thus, osmium is 251390 times denser than hydrogen.
Which of the following interactions would be the weakest?
Picture provided, 10 points. Please only answer correctly.
Answer:
D.) Li+ and C4H10
i hope it helped.
HELP ME!!
If a water molecule (H20) has two hydrogen atoms and one oxygen atom, how would you describe the make-up of a carbon dioxide molecule (C02)?
1 carbon atom, 1 oxygen atom
1 carbon atom, 2 oxygen atoms
2 carbon atoms, 2 oxygen atoms
2 carbon atoms, 1 oxygen atom
Answer:
2
Explanation:
un ejemplo de cambio físico ocurre cuando: a) horneamos pan dulce. b) endulzamos el agua de limón. c) freímos los huevos. d) tostados los granos de café.
Answer:
...
Explanation:
pls do this and don't just do it for the points pls help me I need it
Answer:
what do you want me to do my friend my best friend who is a dreamer
____ power is generated from the heat released when uranium atoms split in a process known as fission.
Which of the following elements is used by your body? A) aluminum B) helium C) calcium D) all of the above
What are the three eras in the geologic time scale? *
Mendeleev's proposal of periodic table was based on:
The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.
[hope this is helpful!:))]
when an ecosystem changes the results are (positive negative both or none) explain
This is science!
Answer:
C. Both
Explanation:
When an Ecosystem changes the effects can be both positive and negative. It all really just depends on what the change is.
PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?
Deposition
Erosion
Weathering
Plate tectonics
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Answer:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Explanation:
Option D, Plate Tectonics
In the rock cycle, surface events takes place at the surface of earth. Thus,
weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.
Identify processes that change matter to a liquid state
Calculate the mass of 4 moles of CuCl2.
What is the charge of an electron?
Which statements describe the fossil record? Check all that apply.
There is very little fossil evidence for the first 4 billion years of Earth.
There is very little fossil evidence for the last 600 million years of Earth.
Most of the fossil evidence is from the first 4 billion years of Earth.
Most of the fossil evidence is from the last 600 million years of Earth.
The fossil record is complete.
The fossil record is not complete.
Answer:
A D F
Explanation:
look at attachment if you don't believe me
Guys pleasee helpp 20 points
Iron sulfide is a compound. It is made by heating a mixture of iron and sulfur.
Describe and explain the differences between iron sulfide and a mixture of iron and sulfur.
Answer:
Here are some of the differences between a mixture of iron and sulfur, and iron sulfide: the mixture can contain more or less iron, but iron sulfide always contains equal amounts of iron and sulfur. the iron and sulfur atoms are not joined together in the mixture, but they are joined together in iron sulfide.
Explanation:
