HELP PLEASE ILL GIVE 25 pointsWhich of the following practices could help reduce erosion of water banks? a. buffer strips b. natural fertilizers and pesticides c. decrease in fossil fuel emissions d. all of the above Please select the best answer from the choices provided A B C D
Answer:
A. Buffer strips
Explanation:
The practice that could help reduce erosion of water banks is buffer strips.
What is erosion?Erosion is the action of surface processes that removes soil, rock or dissolved material from one location on the Earth's crust, and then transports it to another location where it is deposited.
One of the practices that could be used to reduce the effect of erosion is buffer strips.
What buffer strips do is slow and filter storm runoff while helping to hold soil in place.
Learn more on buffer strips here; https://brainly.com/question/26872640
5) Low iron concentration (as low as 0.02 nM) in the open ocean limits phytoplankton growth. Preconcentration is required to determine such low concentrations. Trace Fe3 from a large volume of seawater is concentrated onto a 1.2 mL chelating resin column, the column is then rinsed with 30 mL of high purity water and eluted with 10 mL of 1.5 M high purity HNO3. a.) For each sample, seawater is passed through the column of 17 h at 10 mL./min. How much is the concentration of Fe3 in the 10 mL of HNO3 eluate increased by this preconcentration procedure
Answer:
Check the explanation
Explanation:
Sample volume V= 10 mL/min x 17 h x 60 min/h / 1000 mL/L = 10.2 L
The concentration is increased
10200 mL (sample volum) / 10 mL (eluted sample) = 1020 times.
57x10-9 M / 1020 = 5.6x10-12 M
1.5 M HNO3 will contain ≤ 2ppm x (1.5M/15.7M ) ≤ 0.190 ppm ≤ 190 ppb
Ignoring this is reagent impurity and calculating for sea water
≤ 190 ppb /1020 = 0.186 ppb = 0.186 x 10-9g/mL = 0.186 x 10-6g/L =
0.186 x 10-6g/L / 56 g/mol = 0.003 x10-6 M = 3 nM
Light brings many chemical changes. Can you think of any chemical change brought about by light?
Answer:
MRCORRECT has answered the question
Explanation:
Film photography is another example ofchemical reaction by light. In this example, the chemical compounds coated on the film go through a chemical reaction. ... These plates (usually made of aluminum) are coated with a photosensitive compound consisting of a polymer and a photosensitivechemical system.
which statement best describes the formation of h20(g)?
Answer:
wHeRe ArE tHe StAtEmEnTs mAn
what numbers go in the blank _Na2Co3+_HCI > _NaCl+H2O+_CO2
Answer: [tex]Na_2CO_3+2HCl\rightarrow 2NaCl+H_2O+CO_2[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical equation will be:
[tex]1Na_2CO_3+2HCl\rightarrow 2NaCl+H_2O+1CO_2[/tex]
Thus the numbers that go in the blanks are 1, 2, 2, and 1 respectively for [tex]Na_2CO_3[/tex], [tex]HCl[/tex] , [tex]NaCl[/tex] and [tex]CO_2[/tex] respectively.
4. A taxi ride costs $5 plus .75 cents per mile. If I
ride for 120 miles, how much will be charged?
Answer:
$95
Explanation:
.75 x 120 = 90
90+5 = 95
How many moles
are equal to
4.11x1023
molecules of
CO2?
Explanation:
6.02×1023 culture atoms have a mass of 63.5g. 12.0g. c +23.0g O2__44.0g CO2.(12.0+16.0+16.0=44.0g).1 mol 1 mol. 1 mol number molecules weight
The number of molecules in one mole of carbon dioxide is 6.02 × 10²³. Therefore, the number of moles of carbon dioxide which contains 4.11 × 10²³ molecules is 0.68.
What is Avogadro number ?The number of atoms that constitutes one mole of a substance is called Avogadro number. It is equal to 6.02 × 10²³. Thus, one mole of every elements contains Avogadro number of atoms.
Similarly, one mole of a compound contains 6.02 × 10²³ number of molecules. Thus, one mole of carbon dioxide contains these much molecules.
Given the number of molecules of carbon dioxide = 4.11 × 10²³
Then, no.of moles = number of molecules/ Avogadro number.
no.of moles = 4.11 × 10²³ /6.022 × 10²³ = 0.68.
Therefore, the number of moles of CO₂ that contains 4.11 × 10²³ molecules is 0.68.
Find more on Avogadro number:
https://brainly.com/question/28834341
#SPJ5
What are 3 stages of the water cycle are
Two identical light bulbs are connected to a battery in a series circuit.
An ammeter is wired into the circuit at measures a current of the
battery to be 0.5 Amps. The two light bulbs are then wired in parallel.
The ammeter shows that the current:
Answer:
0.10 amps
Explanation:
Which of the following 0.5 M aqueous salt solutions will have a pH of 7.0 at
LiF RbBr NaClO4 NH4Cl
A) LiF only B) NaClO4 only C) LiF and RbBr D) RbBr and NaClO4
Answer:
LiF and RbBr
Explanation:
Salt is an ionic compound that is made from the reaction of an acid and a base solution. Salts dissolve in water to give solutions that are acidic, basic, or neutral.
Salt formed from a strong acid and a weak base will make an acidic solution when added to water. The reason this occurs is because when the salt dissociates, the conjugate acid of the weak base will donate a proton, or one hydrogen ion, to water and form hydronium ion.
If a salt is formed from a weak acid and a strong base, it dissolves in water and the conjugate base of the weak acid will accept a proton from water and yield the hydroxide ion. Hence the solution of the salt will be basic.
If the salt is formed from a strong acid and a strong base, the salt is neutral when dissolved in water. Both LiF and RbBr are formed from strong acids and strong bases hence they will have a pH of 7.0 in solution.
LiF RbBr NaClO4 NH4Cl is = LiF and RbBr The correction is 'C'.
What are the Salt solutions?
Salt is an ionic mixture that is made from the reaction of an acid and a base resolution. Salts liquefy in water to give solutions that are acidic, basic, or neutral.
Salt constructed from a strong acid and a breakable base will make an acidic solution when added to water. The reason this occurs is that when the salt dissociates, the conjugate acid of the weak base will donate a proton, or one hydrogen ion, to water and form a hydronium ion.
If a grain of salt is formed from a weak acid and a powerful ground, it liquefies in water and the conjugate bottom of the weak acid will accept a proton from water and yield the hydroxide ion. Therefore, the solution of the salt will be basic.
If the salt is formed from a strong acid and a strong bottom, the salt is neutral when liquefied in water. Both LiF and also RbBr are formed from strong acids and powerful bases hence they will have a pH of 7.0 in resolution.
Therefore, the Correct option is 'C'
Find more information about Salt solutions here:
https://brainly.com/question/24856349
How many grams is 4.2X10^24 atoms of sulfur?
A student wants to examine a substance without changing its identity. Which of the following properties should the student examine?
Answer:
A. Ductility, because it can be observed by altering the shape of the substance
Explanation:
Changing the shape of a substance does not change its identity.
18.35 mL of an HCN solution were titrated with 35.4mL of a 0.268M NaOH solution to reach the equivalence point. What is the molarity of the HCN solution
Answer:
0.517
Explanation:
HCN + NaOH → NaCN + H2O [balanced as written]
(35.4 mL) x (0.268 M NaOH) x (1 mol HCN / 1 mol NaOH) / (18.35 mL HCN) = 0.517 M HCN
Answer: 0.517
Explanation:
Which of the following statements about an S N1 reaction mechanism is true? The reaction involves two steps and occurs fastest with tertiary alkyl halides. The reaction involves one step and occurs fastest with tertiary alkyl halides. The reaction involves one step and occurs fastest with primary alkyl halides. The reaction involves two steps and occurs fastest with primary alkyl halides.
Answer:
The reaction involves two steps and occurs fastest with tertiary alkyl halides
Explanation:
To solve such this we must know the concept of nucleophilic substitution reaction. The reaction involves two steps and occurs fastest with tertiary alkyl halides. Therefore, the correct option is option A.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
The characteristics of SN1 mechanism:
SN1 reaction is a nucleophilic substitution reaction.
Leaving group, a nucleophile, electrophile and a solvent are present
Two types of enantiomers can be formed in the reaction depending on the preference of the nucleophile.
The first step is the slowest because a bond is being broken.
SN1 reaction involves two steps and occurs fastest with tertiary alkyl halides
Therefore, the correct option is option A.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ6
Pure water at 25°C ionizes as what?
Answer:
see explanation
Explanation:
Pure water (H₂O) at 25°C follows an autoionization mechanism. That is, water reacts with itself to yield Hydronium Ions (H₃O⁺) and Hydroxide Ions (OH⁻) according to the following proton transfer mechanism.
2H₂O(l) ⇄ H₃O⁺(aq) + OH⁻(aq) => H₂O(I) ⇄ H⁺(aq) + OH⁻(aq) as a shorthand form of the process primarily for convenience. The H⁺ ion is a proton and would not be found in solution as an independent free form particle, but the shorthand format is generally accepted in the chemical community because of it's ease of application.
Other related facts of water ionization include...
At 25°C/1atm => the molar concentrations of [H⁺(aq)] = 1 x 10⁻⁷M and [OH⁻(aq)] = 1 x 10⁻⁷M
Applying to the equilibrium ionization expression for water ...
H₂O(I) ⇄ H⁺(aq) + OH⁻(aq)
C(eq): ∞* 1 x 10⁻⁷M 1 x 10⁻⁷M
*The molar concentration of water is considered to be infinite [∞] as compared to concentration values of H⁺(aq) and OH⁻(aq) and is for practical purposes assumed to be constant. This leads to the classic Ionization Product constant expression for water (Kw = [H⁺(aq)][OH⁻(aq)].
The value for Kw at 25°C/1atm is then ...
Kw = [H⁺(aq)][OH⁻(aq)] = (1 x 10⁻⁷M)(1 x 10⁻⁷M) = 1 x 10⁻¹⁴M² (units are typically dropped and Kw listed simply as 1 x 10⁻¹⁴.
With this, the terms acidity, neutral and alkaline acid base systems are defined and related to pH. That is, if ...
[H⁺(aq)] > [OH⁻(aq)] => Acidic System => pH < 7
[H⁺(aq)] = [OH⁻(aq)] => Neutral System => pH = 7
[H⁺(aq)] < [OH⁻(aq)] => Alkaline System => pH < 7
pH = -log[H⁺] and pOH = -log[OH⁻] and pH + pOH = 14.
A. An element with the valence electron configuration 5s1 would form a monatomic ion with a charge of ________. In order to form this ion, the element will _______ electron(s) from/into the _______ subshell(s).
B. An element with the valence electron configuration 2s22p4 would form a monatomic ion with a charge of ______. In order to form this ion, the element will ______ electron(s) from/into the _______ subshell(s)
Answer:
A) An element with the valence electron configuration 5s¹ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose electron(s) from/into the 5s subshell(s).
B) An element with the valence electron configuration 2s²2p⁴ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose electron(s) from/into the 2p (2pₓ specifically) subshell(s).
Explanation:
The secret to this task is to follow those rules for the stability of electronic structures of elements. The rules include
- Electrons are filled firstly into shells or subshells of lower energies first.
- While filling electronic structure or writing electronic structures for elements/ions, electrons are fed singly to the suborbital before pairing occurs, this is because the totally paired up electrons of a suborbital are more stable than the totally unpaired electrons of the same suborbital which is now in turn more stable than the combination of paired and unpaired electrons in the suborbitals.
A) For an element with its valence electron on 5s¹, this means that there is one valence electron on this atom's outermost shell and outermost suborbitals. So, to form a monoatomic ion, it would take between losing and gaining an electron. Gaining an electron leads to a 5s², which indicates empty 5p orbitals too and is therefore less stable than losing an electron which would lead to the loss of the shell 5 and focus on a completely filled 4-shell.
So, losing the electron from the 5s suborbital to become a monotonic ion makes it acquire a charge of +1.
B) Just like the explanation in (A), to form a monoatomic ion would require a loss or gain of an electron. With valence electrons 2s²2p⁴, gaining an electron would have led to a 2s²2p⁵ and a further breakdown as 2s²2pₓ²2pᵧ²2pz¹ which has unpaired and paired electrons in the 2p suborbital. This is evidently less stable than if an electron was lost, the valence electrons are 2s²2p³ and they are positioned in a totally unpaired fashion in the 2p suborbital as 2s²2pₓ¹2pᵧ¹2pz¹.
Hence, the more stable alternative is more likely to occur and the electron is lost from the 2pₓ suborbital to make the monoatomic ion of the element acquire a +1 charge status too because of lost electron too.
Hope this Helps!!!
The octet rule states that the atoms of the elements bond to each other in an attempt to complete their valence shell with eight electrons. In other words, the atoms will tend to give up or share electrons to complete eight electrons in the valence shell through an ionic, covalent or metallic bond.
In other words, the goal is to have the closest noble gas electron configuration, thus having the last complete electron shell and acquiring stability.
So, in this case, to comply with the octet rule:
A. An element with the valence electron configuration 5s¹ would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose one electron from the 5s subshell.
For an element with its valence electron at 5s¹, this means that there is one valence electron in the outermost shell of this atom and in the outermost suborbitals. To form a monatomic ion, it would be necessary between losing or gaining an electron and that ion is stable. It takes less energy to lose the electron of the suborbital 5s and acquire a charge of of +1, than to acquire an electron, because it forms the 5s² suborbital, which indicates empty 5p orbitals too and is therefore less stable.
Also, in this way, the octet rule is fulfilled.
B. An element with the valence electron configuration 2s²2p⁴ would form a monatomic ion with a charge of -2. In order to form this ion, the element will gain two electron into the 2p subshell(s).
After gain two electron the atom has eight electrons in its valence shell, giving it the same electronic configuration as a noble gas (2s²2p⁶). In this way, the octet rule is fulfilled and the ion is stable.
Learn more:
https://brainly.com/question/14077115?referrer=searchResultshttps://brainly.com/question/13980678?referrer=searchResults
Argon-40 undergoes positron emission as shown:
48 Ar X+ IB
Enter the appropriate values for A and Z and the chemical
symbol for X
Answer:
[tex]\frac{40}{18}Ar => \frac{40}{17}Cl + \frac{0}{1}e\\[/tex]
Explanation:
The process of positron emission is better understood by the following reaction:
[tex]\frac{40}{18} Ar[/tex] → + [tex]\frac{40}{17} Cl + \frac{0}{1} e[/tex]. What is Positron emission?Positron emission may be defined as a subordinate type of radioactive decay called which is effectively known as beta decay. Due to this emission, a proton that is present inside a radionuclide nucleus significantly transformed into a neutron while liberating a positron and an electron neutrino.
According to the context of this question, Argon-40 undergoes the process of beta decay. Through which X element is formed which is known as chlorine. The atomic number (Z) of chlorine is 17, while the atomic mass (A) is 40 which is as identical to argon.
Therefore, the appropriate values for A and Z and the chemical symbol for X are 40 and 17 respectively.
To learn more about Positron emission, refer to the link:
https://brainly.com/question/4598666
#SPJ2
The largest contributed to water pollution is
Answer:
this si from google hope it helps
Explanation:
The Main Causes of Water Pollution in the U.S.
Runoff from Agricultural Operations. Agriculture represents one of the biggest sources of water pollution in the country. ...
Runoff and Nonpoint Source Pollution. ...
Industrial Activities. ...
Leakage from Underground Storage and Piping. ...
Leaking Sewers. ...
Vehicle Emissions. ...
Landfill Leakage. ...
Hazardous Waste.
Answer:
Runoff and Non-point Source Pollution.
Explanation:
it's caused by rainfall or snow-melt moving over and through the ground. As the runoff moves, it picks up and carries away natural and human-made pollutants, finally depositing them into lakes, rivers, wetlands, coastal waters and ground and NPS is it's abbreviation.
The mass of single iridium atom is 3.19*10^-22 grams how many iridium atoms would be in 56.4 milligrams of iridium
Which characteristic of a substance is considered a chemical property
Answer:
c
Explanation:
Which of the following describes the change in atomic mass and atomic number during this reaction?
PLEASE help! BRAINLIEST to correct answer!
Answer:
C
Explanation:
Answer:
I think its q
Explanation:
h is the Planck constant, c the speed of light
A compound A (C22H27NO) is insoluble in acid and base but reacts with concentrated aqueous HCl and heat to give a clear aqueous solution from which, on cooling, benzoic acid precipitates. When the supernatant solution is made basic, a liquid B separates. Compound B is achiral. Treatment of B with benzoyl chloride in pyridine gives back A. Evolution of gas is not observed when B is treated with an aqueous solution of NaNO2 and HCl. Treatment of B with excess CH3I, then aqueous Ag2O and heat, gives a compound C, C9H19N, plus styrene, C6H5–CH=CH2. Compound C, when treated with excess CH3I, then aqueous Ag2O and heat, gives a single alkene D that is identical to the compound obtained when cyclohexanone is treated with the ylid –:CH2– PPh3. Give the structure of A.
Answer:
See explaination
Explanation:
Please kindly check attachment for the step by step solution of the given problem
What is the correct IUPAC name for Ag₂S?
Answer:
Acanthite. MFCD00003406
Explanation:
What is the mass defect of a mole of nuclei with 1.8 x 10^15 J/mol binding
energy?
Answer:
2.0 x 10^-2 kg/mol
Explanation:
A sample of helium gas at room temperature is compressed from 100 cm3 to 20 cm3. Its new pressure is now 30 cm Hg. What was the original pressure of the gas?
Answer:
6 cm Hg
Explanation:
Boyles Law: P1V1=P2V2
(100 mL)(x)=(20 mL)(30 cm Hg)
x = 6 cm Hg
*Text me at 561-400-5105 for private tutoring if interested: I can do homework, labs, and other assignments :)
The change in entropy, ΔS∘rxn , is related to the the change in the number of moles of gas molecules, Δngas . Determine the change in the moles of gas for each of the reactions and decide if the entropy increases, decreases, or has little or no change. A. 2H2(g)+O2(g) ⟶ 2H2O(l) Δngas= mol The entropy, ΔS∘rxn , increases. decreases. has little or no change.
Explanation:
Entropy of a reaction ΔS∘rxn is the degree of disoderliness in a system. Gases generally have a higher degree of disorder compared to liquids. Hence for the reaction 2H2(g)+O2(g) ⟶ 2H2O(l), the entropy decreases sice the reactants are in the gaseous state and the products is in the liquid state of matter
What mass of aluminum is produced by the decomposition of 5.0 kg? How many moles of oxygen are produced?
Answer:
2.6 × 10³ g Al
74 mol O₂
Explanation:
Aluminum oxide decomposes into aluminum and oxygen, according to the following balanced equation.
2 Al₂O₃ ⇒ 4 Al + 3 O₂
Step 1: Calculate the moles corresponding to 5.0 kg of aluminum oxide
The molar mass of aluminum oxide is 101.96 g/mol.
[tex]5.0 \times 10^{3} g \times \frac{1mol}{101.96g} = 49mol[/tex]
Step 2: Calculate the mass of aluminum formed
We will use the following relations.
The molar ratio of Al₂O₃ to Al is 2:4The molar mass of Al is 26.98 g/mol[tex]49molAl_2O_3 \times \frac{4molAl}{2molAl_2O_3} \times \frac{26.98gAl}{1molAl} = 2.6 \times 10^{3} gAl[/tex]
Step 3: Calculate the moles of oxygen produced
The molar ratio of Al₂O₃ to O₂ is 2:3. Then,
[tex]49molAl_2O_3 \times \frac{3molO_2}{2molAl_2O_3} =74molO_2[/tex]
The rate of the reaction is ?
The rate of a chemical reaction is defined as the change in the concentration of a reactant or a product over the change in time, and concentration is in moles per liter, or molar, and time is in seconds. So we express the rate of a chemical reaction in molar per second.
Answer:
Hey!
Your answer is The Rate of a Reaction is a measurement of how the speed at which a reactant is used up / or a product is formed.
Explanation:
R of R (Rate of Reaction) can be affected by:
Reactant concentration (how much of the substance is there to react)
The state of the reactants (whether they are in a solid/liquid/gas state)
The total surface area (more particles of the substance means more reactions...)
The Temperature (hot=quicker cool=slower)
The presence of a catalyst (catalysts speed up the Rate of the Reaction)
HOPE THIS HELPS!!
An empty weighing dish has a mass of 1.0041 ± 0.0002 g. After you add dried sodium chloride to the dish, the mass is 3.2933 ± 0.0002 g. You quantitatively transfer the sodium chloride into a 500.00 ± 0.05 mL volumetric flask and dilute to the mark with deionized water. The molar mass of sodium chloride is 58.440 g/mol. What is the absolute error in the concentration of the resulting solution? Report your answer normally to the correct number of significant figures with the correct unit.
Answer:
The correct answer to the following question will be "0.0013%".
Explanation:
The given values are:
Weight of an empty dish = 1.0041 ± 0.0002 g
Weight of dish + sodium chloride (NaCl) = 3.2933 ± 0.0002 g
Weight of NaCl = 2.2892 ± 0.0002 g
Now,
Volume of the solution = 500.00 ± 0.05 ± 0.0002
= 500.00 ± 0.0502 ml
So,
Molarity = [tex]\frac{W \ NaCl}{M \ NaCl} \times \frac{1000}{Volumes \ of \ solution}[/tex]
On putting the values in the above formula, we get
= [tex]\frac{(2.2892\addeq +0.0002)}{58.440}\times \frac{1050}{(500.00+0.0502)}[/tex]
= ([tex]3.917[/tex] ± [tex]0.0002[/tex]) × ([tex]2[/tex] ± [tex]0.0502[/tex])
= ([tex]0.7834[/tex] ± [tex].00001004[/tex])
Now,
Absolute error = [tex]\frac{0.00001004}{0.7834}\times 100[/tex]
= [tex]0.0013[/tex]%
