When two ice skaters initially at rest push off one another, their final
momenta are..."
Answers
Answer:B
Explanation:
Related Questions
How did the first plants and animals arrive in Hawaii, before humans?
Answers
1. Two hypothetical elements in the periodic table have different characteristics as shown in the following table.
ELEMENT, ELECTRONEGATIVITY, TYPE OF ION, ELECTRICAL CONDUCTIVITY, BRIGHTNESS
X Low Electro cation ion high conduc brightness yes
Y High Electro anion ion none conduc brightness no
According to the data in the table, answer the following questions.
a. If you were to carry out an experiment with these 2 hypothetical elements, write a hypothesis to differentiate them and write another hypothesis about how they would react with oxygen and water.
HYPOTHESIS 1:
HYPOTHESIS 2:
In four steps, design an experiment (write step 1, step 2, step 3 and step 4) to check and verify what types of links would form these elements X and Y if after a series of reactions these elements join in some type chemical bonding.
STEP 1
STEP 2
STEP 3
STEP 4
b. A series of reactions of elements X and Y are given below, complete these reactions bearing in mind that X has an oxidation number +2 and Y has an oxidation number +6.
I. X + O2 XO
II. Y + O2 YO3.
III. XO + H2O X(OH)2
IV. YO3 + H20 H2YO4.
V. X(OH)2 + H2YO4 A + H2O.
d. Considering the result (A) in reaction number 5, answer:
I. What type of chemical bond do you think A has?
II. What are its physical and chemical properties?
III. Design a four-step experiment so that you can identify the type of chemical bond that substance A obtained in reaction 5 has. The design must contain at least 2 variables to be measured and 2 hypotheses with these variables.
Answers
Answer:
gas and element and compound
Explanation:
because it's different and more power so the elements
Si se hace reaccionar CH3CH3 (etano) con cloro, en presencia de luz ultravioleta, los productos obtenidos en este paso son
Answers
Answer:
La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.
Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;
Cl₂ → 2Cl *
Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;
C₂H₆ + Cl → C₂H₅ * + HCl
Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;
C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *
Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;
C₂H₅Cl + Cl * → C₂H₅Cl₂
Explanation:
what is large intestine
Answers
Explanation:
The large intestine (colon or large bowel) is about 5 feet long and about 3 inches in diameter. The colon absorbs water from wastes, creating stool. As stool enters the rectum, nerves there create the urge to defecate.hope it helps.stay safe healthy and happy!!!
The period of development from fertilized egg to birth is known as
Answers
The period of development from fertilized egg to birth is known as [tex]{ \bf{ \underbrace{prenatal\: development}}}[/tex].
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
Mass x height x gravity is the formula to calculate:
Answers
Answer:
Potential energy
Explanation:
[tex]p.e = mgh[/tex]
PLEASE ANSWER QUICKLY!! 25. Which gas sample contains a total of 3.0 x 1023 molecules?
A) 71 g of Cl2
B) 2.0 g of H2
C) 14 g of N2
D) 38 g of F2
Answers
Answer:
14 g of N2
Explanation:
If we look at the options, we will notice that the correct answer needs to be a gas that has about half of the molecular mass of the gas.
If we consider nitrogen gas whose molecular mass is 28g/mol, half of the molecular mass is 14 g.
So;
28g of N2 contains 6.02 × 10^23 molecules of N2
14g of N2 contains 14 × 6.02 × 10^23 /28
= 3.0 x 10^23
WHAT IS EXOTHERMIC EXPLAIN
Answers
Explanation:
An exothermic reaction is a "reaction for which the overall standard enthalpy change ΔH⚬ is negative." Exothermic reactions usually release heat and entail the replacement of weak bonds with stronger ones.
hope it helps
stay safe healthy and happy..Answer:
Exothermic reactions are reactions or processes that release energy, usually in the form of heat or light. In an exothermic reaction, energy is released because the total energy of the products is less than the total energy of the reactants.Explanation:
I hope this helps u have a nice day ☘How does adding heat energy affect magnesium fluoride (MgF2) molecules?
O A The motion of the molecules decreases.
o
B. The motion of the molecules increases.
O
C. The motion of the molecules is at a constant rate.
D. The motion of the molecules stops.
Answers
Answer:
Number B is Answer. The motion of the molecules increases
In a chemical reaction, the number of moles of the reactants
A.
should always be equal to the number of moles of the products.
B.
depends on the amount of product that is formed.
C.
should never be equal to the number of moles of the products.
D.
may or may not be equal to the number of moles of the products.
Answers
Answer:
may or may not be equal to the number of moles of the products.
Explanation:
A chemical reaction involves the interaction between reactants to yield products. The number of moles of reactants and products in the system depends on the stoichiometry of the reaction.
The balanced reaction equation shows us the number of moles of reactants and products involved in the reaction.
Hence, in the balanced chemical reaction equation; the number of moles of reactants may or may not be equal to the number of moles of the products.
Please help it’s due today
Estimate the heat evolved when 74.6 g of sulfur dioxide (molar mass = 64.07 g/mol) is
converted to sulfur dioxide for the given thermochemical equation.
SO2(g) + 12 O2(g)
SO3(g)
AH = -99.1 kJ/mol
Answers
The heat evolved when 74.6 g of sulfur dioxide (molar mass = 64.07 g/mol) is 2838kJ/mol. For the given thermochemical equation.
SO2(g) + 12 O2(g)
SO3(g)
AH = -99.1 kJ/mol
What is thermochemical equation ?A balanced stoichiometric chemical equation known as a thermochemical equation contains the enthalpy change, ΔH.
There are two types of thermochemical reaction:
Thermogenic Reaction. certain thermochemical processes that absorb heat. Enthalpy change for this reaction is favorable.
Heat-producing Reaction. Exothermic reactions are those in which energy or heat are released during the reaction.
A chemical equation shows the initial molecule, reactants, and final products separated by an arrow, but a thermochemical equation is a balanced stoichiometric chemical reaction that also includes the enthalpy change.
Thus, 2838 kJ/mol heat evolved in given equation.
To learn more about thermochemical equation refer the link below;
https://brainly.com/question/10023358
#SPJ2
Reaction of hypochlorous acid and ammonia is product-favored system at equilibrium. Answer A: Reaction of hypochlorous acid and ammonia is product-favored system at equilibrium. A Reaction of hypochlorous acid and ammonia is reactant-favored system at equilibrium. Answer B: Reaction of hypochlorous acid and ammonia is reactant-favored system at equilibrium. B Reaction of hypochlorous acid and ammonia yields pH 7.00. Answer C: Reaction of hypochlorous acid and ammonia yields pH 7.00. C No reaction occurs between hypochlorous acid and ammonia. Answer D: No reaction occurs between hypochlorous acid and ammonia. D Further data are needed to draw a conclusion about a prospective reaction.
Answers
Answer:
A. True
B. False
Explanation:
Reaction between hypochlorous acid and ammonia does not yields a Ph value of 7.00 , this value is defined to water and no other reaction can yield exactly this Ph value. The acid reaction will give a Ph value below 7 while a base reaction will give Ph value of above 7.
helppppp meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Answers
Answer:
The industry represented in the photo is most likely fishing. Other industries that rely on accurate weather forecasts are shrimping, fishery, and aquaculture
Explanation:
what type of volcanic eruption produce ash fall?
Answers
Explanation:
I would say explosive eruptions caused by decompression of the dissolved gases in the magma. The Mt Pinatubo eruption is an example of a massive ash fall that eventually closed down an American base in the Philippines. And just recently the island of St. Vincent suffered major damage from ash fall due to a volcanic eruption.
A sealed balloon filled with 5.00 liters of gas has a pressure of 1.49 atm. This balloon is taken under water where the pressure of the gas becomes 7.62
atm. What is the new volume of this gas? (Assume the temperature does not change.)
O 56.7L
0 0.978 L
0 1.02 L
O 2.27L
Answers
Answer:
0.978L
Explanation:
Using Boyle's law equation as follows;
P1V1 = P2V2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (L)
V2 = final volume (L)
According to the provided information,
P1 = 1.49 atm
V1 = 5.00 liters
P2 = 7.62 atm
V2 = ?
Using P1V1 = P2V2
1.49 × 5 = 7.62 × V2
7.45 = 7.62V2
V2 = 7.45/7.62
V2 = 0.978L
In which situation would hydrogen bonding be present?
Answers
Answer:
Water ?
Need more info.
Water is [tex]H_{2}[/tex]O
Explanation:
Answer:
Hydrogen bonding occurs when a protonic H is bonded to F, O or N and there must be a lone pair of electron in the F, O or N atom.
1) 2C2H6 + 7O2 --> 4CO2 + 6H2O
a) How many moles of O2 are required to react with 24 moles of C2H6?
b) How many grams of C2H6 are required to react with 12 moles of O2?
c) How many grams of O2 are required to react with 200g of C2H6?
Show how you got the answer
Answers
Answer:
a).
[tex]2 \: moles \: of \: ethane \: react \: with \: 7 \: moles \: of \: oxygen \\ 24 \: moles \: react \: with \: ( \frac{24 \times 7}{2} ) \: moles \\ = 84 \: moles[/tex]
b).
[tex]2 \: moles \: react \: with \: 7 \: moles \\ ( \frac{12 \times 2}{7} ) \: moles \: react \: with \: 12 \: moles \\ = 3 .43 \: moles \\ 1 \: mole \: weighs \: 30 \: g \\ 3.43 \: moles \: weigh \: (3.43 \times 30) \\ = 102.9 \: g[/tex]
c).
746.7 g
De la siguiente reacción química Fe2O3 + 3 H2O → __Fe(OH)3 para que se cumpla el balanceo en ella, en el espacio qué coeficiente estequiométrico se debe asignar
Answers
Answer:
Para que se cumpla el balanceo en la reacción química, en el espacio se debe asignar 2 como coeficiente estequiométrico.
Explanation:
La ley de conservación de la materia establece que, dado que no se puede crear ni destruir ningún átomo en una reacción química, el número de átomos que están presentes en los reactivos debe ser igual al número de átomos presentes en los productos.
Luego, debes equilibrar la ecuación química. Para eso, primero debe mirar los subíndices al lado de cada átomo para encontrar el número de átomos en la ecuación. Si el mismo átomo aparece en más de una molécula, debes sumar sus cantidades.
Los coeficientes ubicados frente a cada molécula indican la cantidad de cada molécula para la reacción. Este coeficiente puede modificarse para equilibrar la ecuación, del mismo modo que nunca debe alterar los subíndices.
Al multiplicar el coeficiente mencionado por el subíndice, obtienes la cantidad de cada elemento presente en la reacción.
En este caso la reacción química es:
Fe₂O₃ + 3 H₂O ⇒ ____ Fe(OH)₃
Entonces, teniendo en cuenta todo lo anterior, se puede determinar la cantidad de elementos en cada lado de la ecuación:
Lado izquierdo: 2 hierro Fe, 6 oxígeno O y 6 hidrógenos H Lado derecho: 1 hierro Fe, 3 oxígeno O y 3 hidrógenos HSe puede observar que la reacción química no esta balanceada porque se tiene diferentes cantidades de cada elemento a cada lado de la reacción. Para equilibrarla, se comienza balanceando el hierro. Para eso, el coeficiente estequiométrico debe ser dos:
Fe₂O₃ + 3 H₂O ⇒ 2 Fe(OH)₃
Entonces:
Lado izquierdo: 2 hierro Fe, 6 oxígeno O y 6 hidrógenos H Lado derecho: 2 hierro Fe, 6 oxígeno O y 6 hidrógenos HAhora, a cada lado de la reacción se tiene la misma cantidad de cada elemento, por lo que la reacción esta balanceada.
Para que se cumpla el balanceo en la reacción química, en el espacio se debe asignar 2 como coeficiente estequiométrico.
Solve: The following question in the picture
Answers
Answer:
D is the answer to your question in my opinion
Answer:
I think it is option A
Explanation:
XY 2 will be three molecules which is only a or b. As molecules are usually in a ddiagr like a, I would go with option a
Which equation represents positron decay?
Answers
Answer: 4
Explanation:
I found it online
Which substance would you expect to dissolve most rapidly in 100 mL water?
A
0.4 g granulated sugar
B
0.2 g powdered sugar
C
0.4 g powdered sugar
D
0.2 g sugar cube
Answers
Answer:
b because it is just 0.2 g and powdered sugar has more contact surface than granulated sugar or sugar cube
The solubility can be given as the amount of solute that can be dissolved in the 100 ml of the solution. The most rapidly dissolved sugar in water is 0.2 gram powdered sugar.
What is a contact surface?The contact surface can be given as the area of the compound that is in direct contact with the solution.
The solubility of the compound is found more in the solute with increased surface area.
The surface area of powdered sugar will be maximum, as more granules of the sugar will be in contact with the water than the cube or the granulated sugar.
Thus, the most rapid dissolution in water is found with 0.2 grams of powdered sugar. Thus, option B is correct.
Learn more about solubility, here:
https://brainly.com/question/13620168
What is the molarity of a 750 milliliters solution containing 54.0 grams of KBr (help me please)
Answers
Answer: The molarity of KBr solution is 0.605 M
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Given mass of KBr = 54.0 g
Molar mass of KBr = 119 g/mol
Volume of the solution = 750 mL
Putting values in equation 1, we get:
[tex]\text{Molarity of solution}=\frac{54.0\times 1000}{119\times 750}\\\\\text{Molarity of solution}=0.605M[/tex]
Hence, the molarity of KBr solution is 0.605 M
Which Reference Tables must be used to determine the number of carbon atoms in a parent chain and the type of bonding between the atoms in the parent chain?
O Table P, only
O Table P and Table O, only
O Table N and Table O, only
O Table P and Table Q, only
Answers
Answer:
Explanation:
Did you get the answer to the test, I have the same one but don’t understand the questions that well
por que el petroleo es un no recurso renovable
Answers
Answer:
Por ejemplo, el petróleo o el carbón son ejemplos de recursos no renovables porque, aunque se forman mediante un proceso natural, este necesita demasiado tiempo. ... Esos combustibles fósiles provienen de materia orgánica, pero tardan cientos de miles de años en producirse.
What is the percentage yield when 60kg of ammonia is produced from 60kg of hydrogen?
Answers
Answer:
17.6%
Explanation:
%age yield is = actual yield /percentage yield ^100
HELLLLLPPPPP PLZZZZZZZ
Answers
hola genteee ayuda me pueden decir 5 propiedades físicas y 5 propiedades químicas del ácido sulfúrico porfa es urgente !
Answers
Answer:
La respuesta está en la explicación.
Explanation:
Las propiedades físicas son las visibles y medibles que no afectan químicamente la sustancia en cuestión. Las propiedades químicas hacen alusión a la reactividad de la sustancia:
Propiedades físicas ácido sulfúrico:
Líquido a temperatura ambiente.
Densidad: 1.83g/mL
Punto de fusión: 10°C
Punto de ebullición: 337°C
Índice de refracción: 1.397
Propiedades Químicas:
Ácido Fuerte.
Oxidante Fuerte.
Miscible con el agua reaccionando exotérmicamente.
A temperaturas > 30°C produce vapores azufrados.
Estable en concentraciones menores al 98%
Question 8 of 10
Which functional group is within the compound shown below?
R-OH
A. Carbonyl
B. Amino
C. Ester
D. Hydroxy
Answers
Answer:
Hydroxyl (alcohol compound)
Explanation:
*view photo*
D. Hydroxy
A hydroxy or hydroxyl group is a functional group with the chemical formula -OH and composed of one oxygen atom covalently bonded to one hydrogen atom.Hydroxyl groups are polar, and the oxygen side is always negative, while the hydrogen side is always positive.The functional group of the alcohols is the hydroxyl group, –OH.For example: Methanol is an alcohol containing hydroxyl functional group.Therefore, the correct option is option D.
Learn more:
brainly.com/question/696051
De acuerdo con la primera ley de kihrechhoff determina las intensidades desconocidos así como su sentido. Ayudaaaa:(
Answers
oh sorry I'm American I can't understand that
Explanation:
but...thanks for points hehe
Write the formula for Magnesium sulphate
Answers
MgSO4 is the formula for magnesium
