when an apple falls towards the earth the earth moves up to meet the apple. Is it true? If yes, why is the earth motion not noticeable ?

Answers

Answer 1

Answer:

Yes, this is true.

-- While the apple is falling, the same gravitational force acts on both the apple and the Earth.

-- The mass of the apple is somewhere in the neighborhood of 1/4 kg.

-- The mass of the Earth is about 5.972 x 10²⁴ kg.

-- Since the Earth has roughly 2.389 x 10²⁶ times as much mass as the apple has, the apple has roughly 2.389 x 10²⁶ greater acceleration than the Earth has, and moves roughly 2.389 x 10²⁶ times as far down as the Earth moves up, before they smack together.

-- That's why you don't notice the Earth's motion.

-- Also, you're standing on the Earth, moving up with it, toward the apple.  Maybe it would be different if you were sitting on the apple, riding it down to the ground, and you were able to notice the motion of the ground coming up to meet you at a speed that's 0.00000000000000000000000000419 of YOUR speed.  

Answer From Gauth Math


Related Questions

A bullet with a mass mb=13.5 g is fired into a block of wood at velocity vb=245 m/s. The block is attached to a spring that has a spring constant k of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass mw of the wooden block.

Answers

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Describe the laws of liquid pressure and explain the term fluid. (Please try to give the correct answer 'coz it's urgent!)​

Answers

Answer:

The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids

Answer:

The laws of liquid pressure:

The pressure that is inside the liquid rises with the intensity from the surface of a liquid.

The term fluid:

Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.

Why is velocity proportial to pressure?​

Answers

Answer:

Pressure and velocity are inversely proportional to each other because if pressure increase, the velocity decrease to keep the algebraic sum of potential energy, kinetic energy and pressure constant.

If we aim a radio telescope at a distant spiral arm of the Milky Way Galaxy, we will probably observe a 21-cm line. If we point a large optical telescope at this same region, we will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal. Why not

Answers

Answer:

Because of the interstellar dust and interior location of the solar system.

Explanation:

We will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal if we point a large optical telescope to the region because, the interstellar dust obscures the location of the spiral arm of the Milky way galaxy and this makes neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

Also, the interior location of the solar system also makes the neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

So, the interstellar dust and the interior location of the solar system makes it difficult to detect the neutral hydrogen that gives rise to the 21-cm radio signal with a large optical telescope.

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

what is the relation between centre of gravity and stability

Answers

Explanation:

tilting it will raise the height of its center of gravity.

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

I need help asap please​

Answers

Answer:

I dont know answer Sorry For that thank u

If the box of 500N is placed over the land of area of 2m²,what pressure is experted by the box on the land?​

Answers

Answer:

250 Pa or N/m^2

Explanation:

Pressure(P)=F/A=500/2=250 Pa or N/m^2

An observer measures a 100 Hz Doppler shift as an ambulance goes by. At rest, the frequency of the ambulance's siren is 2,000 Hz. What is the speed of the ambulance?

Answers

The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.

The speed of the ambulance (source) is "6517 m/s"

The equation of Doppler's Effect is given as follows:

[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]

where,

[tex]f_o\\[/tex] = frequency of sound measure by observer  = 100 Hz

v = speed of sound = 343 m/s

[tex]v_o[/tex] = speed of observer = 0 m/s

[tex]v_s[/tex] = speed of ambulance (source) = ?

[tex]f_s[/tex] = actual frequency = 2000 Hz

Therefore, using the values, we get:

[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]

v_s = 6517 m/s

Learn more about Doppler's Effect here:

https://brainly.com/question/1330077?referrer=searchResults

Kgms-1-= Ns ...solution






Answers

Answer:

units of impact or impulse or momnetum are same

These are

Kg m s-1 or N s

why is the fuse used in a circuit called safety fuse?

Answers

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

A certain superconducting magnet in the form of a solenoid of length 0.28 m can generate a magnetic field of 7.0 T in its core when its coils carry a current of 80 A. The windings, made of a niobium-titanium alloy, must be cooled to 4.2 K. Find the number of turns in the solenoid.

Answers

Answer:

The number of turns in the solenoid is 19506.

Explanation:

Length of solenoid, L = 0.28 m

Magnetic field, B = 7 T

Current, I = 80 A

Let the number of turns is N.

The formula used to find the magnetic field is

[tex]B = \frac{\mu 0N I}{L}\\\\7 = \frac{4 \times 3.14\times 10^{-7}\times N\times 80}{0.28}\\\\N = 19506[/tex]

What is 98.907 rounded to 1 significant figure?

Answers

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

If the next number is 5 or more, we round up.If the next number is 4 or less, we do not round up.

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

the weight of a body is 420 newton.calculate it's mass​

Answers

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

How many meters are in 10 miles?

Answers

Answer:

Explanation:

        16093.4

16093.44 meters…….. ….

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

the hydrometer with the density of liquid to be 800 kg metre per square is the volume of the submerged part of the hydrometer is 5 into 10 to the power minus 5 calculate the mass of the hydrometer​

Answers

Answer:

Mass = 0.04 Kg

Explanation:

Given the following data;

Density = 800 kg/m³

Volume = 5 * 10^{-5} m³

To find the mass of the object;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making mass the subject of formula, we have;

[tex] Mass = density * volume [/tex]

Substituting the values into the formula, we have;

[tex] Mass = 800 * 5 * 10^{-5} [/tex]

Mass = 0.04 Kg

define Neutons 3rd law .​

Answers

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?

Answers

Answer:

38500

Explanation:

I looked it up so it may be wrong

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

How many atoms are in the compound NaNO3?

Answers

Explanation:

3 atoms are in the compound

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

How does the temperature of a planet determine the states of matter you would observe on that planet?

Answers

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

A man stands still on a moving walkway that is going at a speed of 0.2 m/s to
the west. What is the velocity of the man according to a stationary observer?
A. 0.2 m/s north
B. 0.2 m/s west
C. 0.2 m/s South
D. 0.2 m/s east

Answers

When,a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west,then the velocity of the man according to a stationary observer would be 0.2 m/s west,Therefore, the correct answer would be option B.

What is Velocity?

The total displacement covered by any object per unit of time is known as velocity. The velocity of an object is depend on the magnitude as well as the direction of the object.

the mathematical expression for velocity is given by

velocity = total displacement /time

The speed and velocity of the object are very different from each other because speed does not depend upon the direction of the moving  object but velocity depends on the magnitude of speed as well as the direction of the moving object.

As per given in the problem a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west therefore from the perspective  of a stationary observer the velocity of man would be 0.2 m/s towards West.

Hence the correct options for the problem would be option B.

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ2

How do longshore currents shape the land?

Answers

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Answer:

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

HELP ME
Which two changes to the can opener would increase its mechanical efficiency?
A shorten the paddle so that they are closer in size to the axle that they turn
B grease the rotating wheel of the opener so that there is less breaks in between moving parts
C replaced it with a straight handle the act as levers with shorter pieces of metal
D sand the cutting surface of the metal piece so that it is perfectly smooth and sharp

Answers

Answer:

I THINK IT'S D....

HOPE SO

The moon Phobos orbits Mars
(mass = 6.42 x 1023 kg) at
a distance
of 9.38 x 106 m. What is its period of
orbit?
[?]s

Answers

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours

The unit of work in terms of Newton and metre is _______

Answers

Answer:

Joule

Explanation:

the unit of work is Joule determined by the letter J.

Answer:

Joule

Explanation:

Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.

Other Questions
if -2 is a zero the polynomial 3x^2+2x+k, find the value of k John is a manager on a manufacturing line. He has cross-trained a few employees on all stations so that if a key employee calls in sick, another employee can fill in to do the job. John is making ______ plans. Find the circumference and area of a circle with a diameter of 12 cm. (Use the approximation of 3.14 for ) how nucleic acids and proteins work together to provide instructions for the structures and functions of an organism. Q: How was the Union ableto achieve victory in theCivil War? Click to read the passage from "The Tell-Tale Heart," by Edgar Allan Poe. Thenanswer the question.Which of the following elements helps build suspense in this passage?O A. The long, flowing sentencesB. The repetition of the word "louder"OC. The use of foreshadowingD. The use of flashbackSCEND Find the size of the angles marked by letters in the following diagram. Please help me anyone Plan production for the next year. The demand forecast is: spring, 20,600; summer, 9,400; fall, 15,400; winter, 18,400. At the beginning of spring, you have 69 workers and 1,030 units in inventory. The union contract specifies that you may lay off workers only once a year, at the beginning of summer. Also, you may hire new workers only at the end of summer to begin regular work in the fall. The number of workers laid off at the beginning of summer and the number hired at the end of summer should result in planned production levels for summer and fall that equal the demand forecasts for summer and fall, respectively. If demand exceeds supply, use overtime in spring only, which means that backorders could occur in winter. You are given these costs: hiring, $130 per new worker; layoff, $260 per worker laid off; holding, $21 per unit-quarter; backorder cost, $9 per unit; regular time labor, $11 per hour; overtime, $17 per hour. Productivity is 0.5 unit per worker hour, eight hours per day, 50 days per quarter.Find the total cost of this plan. Note: Hiring expense occurs at beginning of Fall. (Leave no cells blank - be certain to enter "O" wherever required.) Fall 15,400 Winter 18,400 15,400 30,800 77 18,400 36,800 77 Spring Summer Forecast 20,600 9,400 Beginning inventory I 1,030 Production required 9,400 Production hours required 39,140 18,800 Regular workforce 69 47 Regular production Overtime hours Overtime production Total production Ending inventory Ending backorders Workers hired Workers laid off Spring Summer Fall Winter Straight time Overtime Inventory Backorder Hiring Layoff Total Total cost Anyone good at Ks3 math? A sofa is on sale for $703, which is 26% less than the regular price what is the regular price? A motorist travels 90 miles at a rate of 20 miles per hour. If he returns the same distance at a rate of 40 miles per hour, what is the average speed for the entire trip, in miles per hour? What is this answer PH=? Tm x,y tha mn: x^2-2xy+3y-5x+7=0 during times of personal crisis we may feel the need to engage the services of a therapist to help us with out problemsfact or opinion and why Find the volume of the composite solid.10 cm12 cm32 cm10 cm You have a dog-walking business. You charge $12 per hour. Let's define n as the amount you earn and h as the number ofhours you work. You want to make $30, so you figure you need to work 2.5 hours.Sort the solution methods by whether they are correct or incorrect methods to solve the problem. You decide to move out of your college's dorms and get an apartment, and you want to discuss the budget with your roommate. You know that your monthly grocery bill will depend on a number of factors, such as whether you are too busy to cook, whether you invite guests for meals frequently, how many special holiday meals you will cook, etc. In particular, G will have an approximate normal distribution with a variance of 2500 and a mean:=300+10M100B+50HWhere M is the number of meals to which you invite guests, and E[M]=8. B is a measure for how busy you are and assume it is U[0,1]. H is a variable that takes on the value 1 for holiday months of November, December, and January and 0 otherwise.a. What is the mean of G in a November, where M=10 and B=0.5?b. What is E(G)? With crews working shifts that span 24 hours a day, what is the most important thing for Satya to keep in mind as she prepares her live talk that will be replayed to employees on other shifts Which quote from the passage best illustrates the theme of trusting oneself?"Is it what I should do?I don't want to know. I want to watch it all unfold. "Let me think about this, she said. Can I be by myself for a while?""Speak aloud to me when you want to talk. I'll come to you.