When 2-methyl-3-hexene is treated with Cl2 in methanol, three products are formed (neglecting stereoisomers). Draw curved arrows to show the movement of electrons in this step of the reaction mechanism.

Answer:

3.11 mol/kg

Explanation:

Molality M = number of moles of solute, n/mass of solvent, m

To calculate the number of moles of glycerol (C₃H₈O₃) in 22.75 g of glycerol, we find its molar (molecular) mass, M',

So, M' = 3 × atomic mass of carbon + 8 × atomic mass hydrogen + 3 × atomic mass of oxygen

= 3 × 12 g/mol + 8 × 1 g/mol + 3 × 16 g/mol = 36 g/mol + 8 g/mol + 48 g/mol = 92 g/mol.

So, number of moles of glycerol, n = m'/M' where m' = mass of glycerol = 22.75 g and M' = molecular mass of glycerol = 92 g/mol

So, n = m'/M'

n = 22.75 g/92 g/mol

n = 0.247 mol

So, the molality of the solution M = n/m

Since m = mass of ethanol = 79.6 g = 0.0796 kg, substituting the value of n into the equation, we have

M = 0.247 mol/0.0796 kg

M = 3.11 mol/kg

So, the molality of the solution is 3.11 mol/kg.

Answer:

3KOH(aq) + FeCl3(aq) --------> Fe(OH)3 + 3KCl

Explanation:

The rule for balancing chemical equations is that the number of atoms of each element must be the same on both sides of the reaction equation.

Hence, the two reactants are potassium hydroxide and aqueous iron(III) chloride.

The balanced molecular reaction equation is;

3KOH(aq) + FeCl3(aq) --------> Fe(OH)3 + 3KCl

Answer:

highest boiling point.

Explanation:

Hello there!

In this case, according to the given information, it turns out necessary for us to recall the definition of colligative properties, more specifically that of boiling point elevation, defined in terms of the temperature change, van't Hoff's factor, molality of the solution and boiling point elevation constant:

[tex]\Delta T_b=i*m*K_b[/tex]

In such a way, since all the given solutions have the same molality and solvent (water), they all have the same m and Kb, for which we focus on the van't Hoff's factor which is 1 for CH2O (nonionizing), 2 for NaCl (Na and Cl ions are released), 2 for HF (H and F ions are released) and 3 for AlCl₃ (one Al and three Cl ions are released).

Therefore, since D. 0.50 mol AICI, in 1.0 kg water  has the greatest van't Hoff's factor, we infer it has the highest boiling point.

Regards!

Answer:

the discovery will always need to be tested more where if you're investigating you should already be in a more controlled environment

The difference between accidental discoveries and scientific investigations are as follows.

To learn more about accidental discoveries,

https://brainly.com/question/13167222

#SPJ2

Answer:

0.0900 mol/L

Explanation:

A chemist makes 330. mL of nickel(II) chloride working solution by adding distilled water to 220. mL of a 0.135 mol/L stock solution of nickel(II) chloride in water. Calculate the concentration of the chemist's working solution. Round your answer to significant digits.

Step 1: Given data

Step 2: Calculate the concentration of the final solution

We prepare a dilute solution from a concentrated one. We can calculate the concentration of the working solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁/V₂

C₂ = 0.135 mol/L × 220. mL/330. mL = 0.0900 mol/L

Answer:

6.023*10^23........ .......

Answer:

The molar concentration of the H₂SO₄ solution is 0.28 M

Explanation:

Molar concentration = number of moles / volume in litres

Number of moles = molar concentration × volume

From the equation of reaction, molar ratio of acid to base = 1 : 2

Using the formula; Na/Nb = CaVa/CbVb

Where Na is the number of moles of acid; Nb = number of moles of base; Ca = concentration of acid; Va = volume of acid; Cb = concentration of base; Vb = volume of base; Na/Nb = mole ratio of acid to base

Substituting the given values in the equation:

1/2 = Ca × 25.18 / 0.93 × 14.92

Ca = 0.93 × 14.92/ 25.18 × 2

Ca = 0.28M

Therefore, the molar concentration of the H₂SO₄ solution is 0.28 M

Answer:

Changes of state occur at segment

✔ B–C

and segment

✔ D–E

Explanation:

got it right on edge :)

The amount of energy added to the ice between Point A and Point D is approximately 25 kJ.

To calculate the amount of energy added to the ice between Point A and Point D, we need to consider the different stages of the heating curve.

Heating the ice from -20°C to 0°C:

The energy required to raise the temperature of the ice can be calculated using the specific heat of ice (2.10 J/(g·°C)) and the mass of the ice (60.0 g). The temperature change is from -20°C to 0°C, which is a total of 20 degrees.

Energy = mass × specific heat × temperature change

Energy = 60.0 g × 2.10 J/(g·°C) × 20°C

Energy = 2520 J

Melting the ice at 0°C:

The energy required to melt the ice can be calculated using the latent heat of fusion of ice (333.4 J/g) and the mass of the ice (60.0 g).

Energy = mass × latent heat of fusion

Energy = 60.0 g × 333.4 J/g

Energy = 20,004 J

Heating the water from 0°C to 15°C:

The energy required to raise the temperature of the water can be calculated using the specific heat of water (4.18 J/(g·°C)) and the mass of the water (60.0 g). The temperature change is from 0°C to 15°C, which is a total of 15 degrees.

Energy = mass × specific heat × temperature change

Energy = 60.0 g × 4.18 J/(g·°C) × 15°C

Energy = 3753 J

The total energy added to the ice between Point A and Point D is the sum of the energy calculated in each step:

Total Energy = Energy (Heating ice) + Energy (Melting ice) + Energy (Heating water)

Total Energy = 2520 J + 20,004 J + 3753 J

Total Energy = 25,277 J

Converting this energy to kilojoules (kJ):

Total Energy = 25,277 J ÷ 1000

Total Energy = 25.277 kJ

Therefore, the amount of energy added to the ice between Point A and Point D is approximately 25 kJ.

To know more about energy

https://brainly.com/question/1932868

#SPJ2

Answer:

the house found in a very cold are Igloos or the ice house

Answer:

1.17 L of H₂

Explanation:

We'll begin by calculating the number of mole in 2.3 g of Mg. This can be obtained as follow:

Mass of Mg = 2.3 g

Molar mass of Mg = 24 g/mol

Mole of Mg =?

Mole = mass /molar mass

Mole of Mg = 2.3 / 24

Mole of Mg = 0.096 mole

Next, we shall determine the number of mole of H₂ produced by the reaction of 2.3 g (i.e 0.096 mole) of Mg. This can be obtained as follow:

Mg + 2HCl —> MgCl₂ + H₂

From the balanced equation above,

1 mole of Mg reacted to 1 mole of H₂.

Therefore, 0.096 mole of Mg will also react to produce 0.096 mole of H₂.

Finally, we shall determine volume of H₂ produced from the reaction. This can be obtained as follow:

Number of mole (n) of H₂ = 0.096 mole

Pressure (P) = 2 atm

Temperature (T) = 298 K

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V) of H₂ =?

PV = nRT

2 × V = 0.096 × 0.0821 × 298

Divide both side by 2

V = (0.096 × 0.0821 × 298) /2

V = 1.17 L

Therefore, 1.17 L of H₂ were obtained from the reaction.

Answer:

The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....

One of the lab safety rules being violated is that Jodi doesn't have her hair tied up. She should have her hair tied up. Having her long hair not tied up or away from her face is a safety hazard. Jodi is also not wearing glasses, which is essential when working with chemicals. One of the Bunsen Burners aren't being used but it's on, which is a fire hazard.

Answer:

Jodi should wear her hair up to avoid a mishap, such as lighting her hair on fire. Then, instead of using a fire extinguisher on Jodi, Kimberly should use a fire blanket to prevent additional damage. Mac is preoccupied with a second flame and maybe Jodi without her safety goggles?

Answer:

The halogen is Iodine.

Explanation:

Using the ideal gas equation, we find the number of moles of gas present, n.

PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K

Since PV = nRT, making n subject of the formula, we have

n = PV/RT

substituting the values of the variables into the equation, we have

n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)

n = 0.15369 atm-L/32.636 L-atm/mol

n = 0.0047 mol

Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas

So, M = m/n

M = 1.19 g/0.0047 mol

M = 252.7 g

Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g

From tables, the only halogen with this atomic mass is Iodine.

So, the halogen is Iodine.

Answer:

what do you need help with

Answer:

The most important difference between the two is that butter is derived from dairy and is rich in saturated fats, whereas margarine is made from plant oils. ... If the margarine contains partially hydrogenated oils, it will contain trans fat, even if the label claims that it has 0 g.

Explanation:

(⌒_⌒;)

Answer:

It predicts whether or not a reaction will be spontaneous.

Explanation:

The equation;

∆G= ∆H - T∆S enables us to obtain the Gibbs free energy of a chemical process.

The Gibbs free energy value tells us whether a chemical process will be spontaneous or not.

When;

∆G>0 the reaction is not spontaneous

∆G=0 the reaction is at equilibrium

∆G<0 the reaction is spontaneous

Answer:

4 and 6

Explanation:

Period 4 has 18 elements and so does period 6.

Answer:

pH=8.676

Explanation:

Given:

0.75 M [tex]NH_{3}[/tex]

0.20 M [tex]NH_{4}[/tex]

The objective is to calculate the pH of the buffer using the kb for [tex]NH_3[/tex]

Formula used:

[tex]pOH=pka+log\frac{[salt]}{[base]}\\[/tex]

pH=14-pOH

Solution:

On substituting salt=0.75 and base=0.20 in the formula

[tex]pOH=-log(1.77*10^{-5})+log\frac{0.75}{0.20}\\ =4.75+0.5740\\ =5.324[/tex]

pH=14-pOH

On substituting the pOH value in the above expression,

pH=14-5.324

Therefore,

pH=8.676

Answer:

Ka = 3.45x10⁻⁶

Explanation:

First we calculate [H⁺], using the given pH:

To solve this problem we can use the following formula describing a monoprotic weak acid:

We input the data that we already know:

And solve for Ka:

Answer:

Rank the following chemical species from lowest absolute entropy (So) (1) to highest absolute entropy (5) at 298 K?

a. Al (s)

b. H2O (l)

c. HCN (g)

d. CH3COOH (l)

e. C2H6 (g)

Explanation:

Entropy is the measure of the degree of disorderness.

In solids, the entropy is very less compared to liquids and gases.

The entropy order is:

solids<liquids<gases

Among the given substances, water in liquid form has a strong intermolecular H-bond.

So, it has also less entropy.

Next acetic acid.

Between the gases, HCN, and ethane, ethane has more entropy due to very weak intermolecular interactions.

HCN has slight H-bonding in IT.

Hence, the entropy order is:

Al(s) < CH3COOH (l) <H2O(l) < HCN(g) < C2H6(g)

Answer:

I used a,b c, d in the equation as substituted coefficients to find the unknown for each element of P, Na, O, H, and I got

P4(s) + 4NaOH(aq) + 2H20(l)---->2Ph3 +2Na2HPO3(aq).

which I think should be the answer.

Answer:

methylcyclohexane does not possess a chiral center

Explanation:

A molecule is said to possess a chiral center if one or more of the atoms in the molecule is bonded to four different atoms or groups.

If we look at methylcyclohexane, none of the carbon atoms in the molecule is bonded to four different atoms or groups hence the molecule contains no chiral centers and will not exhibit optical isomerism.

So, methylcyclohexane has a plane of symmetry thus it is an achiral molecule.

Answer:

Nitrate NO3

here's your answer, hope it helps you